Configuration EWA in SOLman

Hello
I need to configurate the EWA in my solman  (SP12), and  I need to monitori the all system, to active the connections external to support from  OSS marcket place,  and maintinacer oioptimaze configuration.
Please I need the  guides for these configuration
Where can I find these  guide??
Do I need update  the  high stack o no???
Any suggestion.
Thanks
Danny
Edited by: Danny Sanchez on Jan 29, 2010 12:08 AM

Hi,
Hav a look at the SAP Tutor file which provides the steps for EWA.
https://service.sap.com/~sapidb/011000358700006936042005E.sim
Also, chk the below thread.
How to generate Early Watch Report from SAP SOLUTION MANAGER
Re: Configuration EWA in solution manager for systems in the landscape
For Mopz, chk the SMP
https://websmp110.sap-ag.de/mopz
https://websmp110.sap-ag.de/~sapdownload/011000358700000422572009E
~Waseem.

Similar Messages

  • EWA via solman for SQL Server

    Hi,
    I'm trying to configure EWA via solman for an ECC 6.0 system on MS SQL 2005.
    I've completed all the necessary steps i.e. all the RFC's are working fine, RTCCTOLL is ok, the report is getting generated in SDCCN on the satellite system...however it doesnt seem to get transfered to solman.
    RSCOLL00 gives a weird "database system not supported " message although it shows finished successfully.
    Is there some other program for SQL Server or maybe something that I'm missing...
    Pls. help.
    Thanks a lot,
    Saba.

    Hi Saba,
    you can't schedule EWA for Solution manager sessions in SDCCN of the satellite. The only kind you can schedule in the satellite is the kind you send directly to SAP, that's why SDCC_OSS appears as the RFC connetion. You have to fetch EWA for Solution Manager sessions from the solution manager using a refresh sessions task. Does anything happen when you perform a refresh sessions task in SDCCN on the satellite (when you pick the RFC to Solution Manager as the destination)?
    You should also check that the service definitions are current in both satellite and solution manager systems. Note 727998 explains how to delete and replace them. (Often the only way of being totally sure that the service defintions are correct.)
    best regards,
    -David.
    Edited by: David Murphy  on Nov 20, 2008 4:26 PM

  • Configure EWA and performance monitoring of portal in solution manager

    Hello All,
    I want to configure EWA for portal in solution manager.
    As well as want to get some data collection for performance of portal using solman.
    so can anybody guide me for the same as well as provide some valuable inputs.
    Thanks in advance.
    Regards,
    Ramkrishna

    Hello,
    u mean perormance of portal right?
    I would suggest you to start with configuring this EWA,when it is done you will get the performance data from EWA itself and then we can anaylze and move forward
    But still if you want you can refer to notes 485933,1017324 and 934808
    They will be higly useful
    Rohit

  • Configuring EWA for non Abap System

    Hello to everybody.
    I am configuring EWA in Portal System 7.01and SOLMAN 7.01 too. It's a new installation and i have a question:
    - Which is the order to start to configure SMD?
    - Is Necessary configure the CCMSR agent?
    I configured EWA in a old system that had installed the agents, but they could not to connect to SMD Server.
    I Fixed this problem, but now I need configure the SMD since start.
    By the way, I'm new configuring EWA for Java
    Thanks.
    Esteban G.-
    Edited by: Esteban Gutierrez E. on Jan 11, 2010 8:48 PM

    Hi Sailesh
                     Here is related blog fr your issue. Hope this will help you.
    setup EWA for portal
    Thanks
    Jignesh

  • Configure EWA for our SAP PRD server

    Hello,
    I would like to configure EWA reports for our PRD system.
    In our Solman (7.01), we have the following:
    smsy -> Systems
    Sap ERP ENHANCE PACKAGE with BAS, DEV, PRD and BAS systems
    SAP SOLUTION MANAGER with SSM system
    solution_manager -> Solution Overview
    ERP
    SAP Solution
    In these both solutions, the only EWA reports that I get are for my SSM system.
    I have configured the trusted connections for my PRD.
    Now, how could I tell my solman that I would like that PRD report is also generated in ERP solution?
    Thanks in advance for your answers.

    Paul Babier wrote:
    Hello,
    >
    > The best practices document is here https://websmp102.sap-ag.de/~sapidb/011000358700001873212008E
    > You should be setting your EWAs up accordingly. There are numerous ways to set it up, but this document will guide you through the best practices.
    >
    > Regards,
    >
    > Paul
    Hello,
    You were right it is an fast to read document to setup EWA.
    It is setup and seems to work.
    Thanks.

  • Setup EWA in Solman - Service Cannot be Reached

    Hi,
    I was trying to setup EWA in solman for my satellite system. In Dswp-> Solution->Operation Setup->Setup EarlyWatch Alert, I got the following error:
    Service cannot be reached
    What has happened?
    URL http://serverxxx:port/sap/bc/webdynpro/sap/dswp_earlywatch_admin call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system SMN with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:ACMSAPD02_MNR_03-v:0-s:403-r:Forbidden
    May I know how to rectify this? Thank you.
    regards,
    zl

    Hi,
    Please check if the service is activated.
    Transaction SICF.
    Hierarchy Type: Service and execute it.
    default_host-> sap-> bc-> webdynpro-> sap-> dswp_earlywatch_admin check if this is activated, If it snsot activated, activate it and test the service by using right mouse option. While testing the service it will ask for a userid and password, enter your user id and password. and login it should allow you to login and check the service successfully.
    If you are not able to login due to authorization issues, please use transaction SU53, there you will find any missing authorizations. After you add those authorization objects you should be successfully open the service.
    If possible perform the IMG activity SAP Solution Manager-> Basic Settings-> HTTP Services-> Activate Solution Manager service.
    Hope this helps.
    Thanks & Best Regards,
    Raghavendra.

  • Configuration EWA in clien with  two solution manager

    Hello
    I have a question I am activating EWA ¡on SOlman  but  I have  two  solman  fo  the same company, el first  is for management r3 system and second  is for management xrpm,bw,portal system.
    The EWA is  running  in the first  solman, and the saprouter I think  is here too. So I want to activate the EWA in the second  solman in the guide  I have this note 33135 an this talks about connetion with SAP.
    Is possible that the EWA   in two solman for the same client.
    Addionaly the Should  the rscctool report  run in the  satellites systems too?
    Thanks
    DS

    Hello Danny,
    There should be no conflicts providing you keep a few things in mind.
    On the Satellite, in SDCCN > Setting> Task>Specific> RFC Destination
    Please make sure that you define one Solution Manager system as the Master. This will be the Solution Manger system that will schedule an SDCCN EarlyWatch Allert task automatically on the Satellite, throught the Maintenance Package, so it needs tol be the one specificed in the Mainatence Package task. In other words  you set up the recommended EWA Activation as documented at http://service.sap.com/ewa for one Solution Manager system.
    Then for additional Solutioin Manager systems you would create an SDCCN Task in the same way you would generate an ad hoc EWA report, only you would choose the RFC Destination for the second ( and/or subsequent) Solution Manager systems, and you would specify it as a periodic task so it would reschedule itself each week, so to affect automation of the sending of the SDNNC session data to the other Solution Manager Systems.
    This way you will not have conflicts between the solution manager systems.
    Regards,
    Paul

  • Configuring CHARM after solman migration

    Hi,
    We are going to migrate our existing Solman system to another system using system refresh, we have implemented CHARM which takes care of the Transport for our ECC and Portal Systems, my question is what needs to be done in the newly migrated system after the system refresh and what changes we need to make in our ECC System in order for CHARM to work in the newly migrated system.
    Our landscape info
    We have DEV,QA and Prod in our existing landscape with charm is configured in the Solman. Our Prod is the main domain controller and solman is the secondary domain controller, can some one explain me what needs to be done in the configuration after the system migration.
    Sathish

    Hi
    Only hostname/ipaddress and SID name will be changed for solution manager. So for solution manager back RFC in ECC and EP systems you need to change hostname/ipaddress and instance number.
    From SMSY try to update/read ECC and EP systems data. Check it is working fine or not.
    Suman

  • Issue in configuring EWA using solution manager

    Hi
    I am configuring the Early watch alert for my ECC system, I am facing couple of issue in it.
    Soultion manager version 7 with SP14.
    1. not able to see Setup EWA tab in Solution setting under Solution directory
    2. I am not able to activate system under CCMS Monitoring of EWA in solution setting under solution directory, it does not give any error.
    3. I dont see "Early watch Alert" service option when i try to create service under solution monitoring -> EarlyWatch alert -> create new service session
    Also like to know the difference between Early watch alert for solution and EarlyWatch alert. In my one of the solution i can see both option and allowing me to create the same.
    Regards,

    Hi Rajesh,
    Have you setup your Solman system as a master system in the remote ECC system in SDCCN? i am still struggling to understand and get EWA working but i have managed to get EWA report for my ECC test system but not Solman itself.
    Have a look in SMSY to see if your systems are in a green box, if they are then monitoring is activated for that system then you should be able to see that system in DSWP when scheduling EWA processing.
    Also have a look at OSS Note 1257308 - FAQ: Using EarlyWatch Alert. there is a PDF file which shows how to setup EWA according to best practice.
    regards,
    Mandeep

  • Steps to Configure Dashboard in SOLMAN 7.1

    Hi All,
            Could anyone pls tell me the configuration steps for Dashboard in SOLMAN? Kindly let me know as soon as possible.
    Thanks & Regards,
    Krishnan Kumar.K.

    Dear All,
    Please have a look at following SAP Knowledge Base Article; this should help as a start point:
    1831983 How to display dashboards from SolMan 7.1 SP05
    Additionally all information is documented in SAP Application Help, chapter "Dashboards and Dashboard Apps":
    http://help.sap.com/saphelp_sm71_sp11/helpdata/en/9e/596617c91c4e6f84a2f0181a6402c3/frameset.htm
    I hope this helps, kind regards,
    Marta - SolMan Product Support

  • Config EWA in SolMan 7.1

    Gurus,
    How do you config Earlywatch Alert in SolMan 7.1?
    There's no DSWP or SMSY anymore.
    Regards,

    Hi Lori,
    It is very easy once you know how to do it, and here is the way to do it properly, with no being quick, as the first respondent is indicating?
    You start Solman_workcenter > System Monitoring Tab > Setup Link > EarlWatch Alert configuration.
    Here you can select for one solution or all solutions.
    This will basically take you to what you may be familiar with as the screen in solman_ewa_admin.
    If you select by Solution , the view in that screen is just for the one solution, and if you select for all solutions will give you the view you were accustomed to before, all the solutions.
    Regards,
    Paul

  • Average Response Time Different in SLR/EWA (in solman) and ST03 (in satelli

    Hi All,
    We find that the average dialog response time shown in SLR and EWA reports of Solman is much lower (250 ms) whereas the dialog response time shown in ST03 transaction of the system (XI instance) is high 2000 ms.
    Which one is correct and how can I correlate these two values if both are right in their own way.
    regards

    Hello,
    The data source is ST03, therefore unless there is an issue with the collectors, you should assume the ST03 data is correct.
    Pleae run RTCCTOOL on the managed system and ensure ST-PI and ST-A/PI are current.. Also make sure your SAPOSCOL is current.
    There is a possibility that there was an error during preparing the transport to send the data back to Solution Manager, so scan the SDCCN task logs for any errors/warnings on the managed system. You can also check the transport to see what vaues are being returned to Solman's service session. If the have the same value as ST03 at this point, then there is an issue witht eh EWA/SLR provcessing. If the data is not the same here as ST03 then there was an issue with the SDCCN tasks.
    If the data collection is not at issue and the transfering of that data to Solution Manager service session had no errors, then Please follow Jared's recommendation, as this would then be an issue processing the service sessions, and this could be due to outstanding Service Content updates. This can be checked with transaction code AGS_UPDATE.
    Regards,
    Paul

  • Configuration require for SOLMAN after installation

    Dear all,
    I have successfully install Solution Manager 7.0 EHP1 on Windows Server 2008 Oracle 10g database.
    Now I cant understand what are the configuration require and from where shall i start?
    Please help me as I am a beginner.
    Thanks
    Nurujjaman

    Hi,
    Follow the steps from the configuration guide for basic configuration activities:
    https://service.sap.com/~sapidb/011000358700000308502009E/SM_CONF_SPS23.pdf
    Also check http://service.sap.com/~sapidb/011000358700001735062008E to get a visual help.
    For advanced configuration, follow the RKT at http://service.sap.com/rkt-solman
    Regards,
    Srikishan

  • Configuration Report through Solman

    Hello Experts,
    I mapped all the configuration activities for MM, SD,HR,etc modules in solar02 and consultants are doing configuration in dev system through solution manager. Now my query is how we can show that or figure out that we have done configuration through solman in dev system??
    Is there any Tracebility functionalityor other functionality is available to check this in solman or dev system?
    Regards,
    Abhishek

    Hi,
    You can have the reporting using SOLAR_EVAL txn code since it has the reporting functionality based on the Configuration Tab in SOLAR02.
    Regards,
    Vivek

  • Problem to generate SRM 7.0 configuration guide into solman

    Hi gurus,
    We have a problem to generate SRM 7.0 configuration guide related to business scenario plan driven procurement with supplier collaboration into transaction SOLAR02.
    We are using Solution Manager 7.0 and when we execute the configuration guide download, the system starts dowloading some files and after that ask for us execute a ms word macro to generate the guide, but the ms word file generated is empty.
    Can anybody help me with this issue or tell me if there is another way to get the configuration guide we need?. Thanks in advance.
    Regards,
    Horacio

    Hello Horacio,
    You may want to check yuor MS Word Client Trust Center settings.
    Typically you should have "Enable all Macros" and "Trust Access to the VBA Project Object Model" Checked.
    I thought of this when you mentioned you were requested to run an MS Word Macro and it generated a blank file.
    Without these settings enabled, could be why a blank report is generated. So you may want to check these settings and, if they are not set, then it would be worthwhile to enable them and try to generate with the MS Word Macro again.
    Regards,
    Paul

Maybe you are looking for