Configuration fetch failed
Hi,
I am working with CiscoWorks RME3.5. The Inventory management and the Syslog analyser work well, except the configuration management. Ciscoworks can not fetch config of our Cisco Catalyst switches, because of the SSH session failure. The messeage is as follows:
SSh: failed to initiate ssh session,Cannot create ssh session to (switch-name).
The IOS of our switches Catalyst 4006 and 2950 do not support the SSH function yet. Is it possible to desactive SSH protocol in order to fetch the config from our swithces?
Thanks in advance.
Jessie Dong
Try this.
Goto RME, Administration, Configuration Management, General Setup. On the "Transport Setup" tab, verify Telnet and TFTP is listed before SSH.
Similar Messages
-
I've got a handful of devices in Cisco Prime Infrastructure 2.0 which show up in the "Archive Failed Devices" view. The "Failure Reason" is some variation of "Fetch VLAN configuration - Command failed" sometimes including "TELNET: Failed to establish TELNET connection to x.x.x.x". What does this mean? How do I overcome this? In all cases, the device is configured to use SSH and has valid SSH credentials. In all cases, I can SSH from the command line of the NCS appliance to the devices listed in the "Archive Failed Devices" view.
Hi
I was able to fix the "Fetch VLAN configuration - Command failed" by allowing tftp from the device to PI server in firewall. See if this can help. -
Prime Infrastructure 2.1 - Fetch VLAN Configuration - command failed
Hi,
i am installing the system on a customer's site.
i've noticed that most of the devices configured on the PI have resulted in error in the Configuration Archive with this error:
Fetch VLAN Configuration - command failed.
i checked that the tftp service on the PI is enabled.
i tried manually executing from a device: copy flash:vlan.dat tftp://PI_IP and couldnt manage to do so.
i also tried manually to do it to another tftp server and it worked.
i dont see any FW drops.
does anyone have any idea how to troubleshoot this?
thanks in advance!As to get the VLAN information, the file in Cisco devices Flash : Vlan.dat is fetced, and if PI fails to do so, it gives this error. As it is a file in flash, PI needs to send it over to Server itself using TFTP.
If TFPT is somehow not working between Server and devices, it may throw this error.
Is it happening with all the devices or some perticular platform?
If with all the device, you need to check if there is any Firewall blocking TFTP access to devices.
Also, you can check if TFTP service on CPI is working properly by command ncs status.
If service is affected, try to restart service - service tftp restart Or you can restart the PI Machine itself.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
The error message below is from a device that I am trying to sync a configuration, device is using TACACS:
RUNNING
CM0151 PRIMARY RUNNING config fetch failed for ROUTER Cause: TELNET: Failed to establish a Telnet connection to
X.X.X.X Cause connection refused.
SSH: Same message as aboove except authentication failed on device 3 times.
ACTION: Check if protocal is supported and required on device package is installed.The error about authentication is usually correct. Go to Common Services > Device and Credentials > Device Management, select the device in question, then export the credentials. Look at the CSV export, and take the username and password, and try to SSH to the device from the LMS server. Verify you can login and get into enable mode using the same credentials in DCR.
-
Configuration system failed to initialize
Getting error when I try to install an excel addin that I have published.
Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
To publish the addin I use the publish option on the build menu of VS2013.
Specify the location to publish this application: F:\publish where F: is a USB drive.
What is the default installation path on end user computers: From a CD-ROM or DVD-ROM
Then I take the USB drive to another PC, double click on setup.exe in the USB drive and get the "configuration system failed to initialize" error. I copy the entire publish directory to the C: drive of the target system and get the same error.
What am I doing wrong?
thanks,Hi Steve,
>>Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
#Customization could not be loaded because the application domain could not be created.
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly. If it could not install correctly, I assume that there might be something wrong when you
publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
"Configuration system failed to initialize" when trying to connect FM12 to Sharepoint
Adding a connection to Sharepoint using the FM12 CMS Connection Manager is failing with the error "Configuration system failed to initialize". I can access all the sites and libraries in Sharepoint perfectly from IE on the same PC, but no matter what I try in the FM12 Connection Manager I get the above mentioned error. The PC (which is actually a VM) is running Windows Server 2008 R2 (x64 with heaps of RAM and HDD free) with all updates applied. FM12 is installed as part of Technical Comms Suite 5 subscription.
Does anyone have any ideas what may be causing this (or what it even means) and how I can fix it?Hi Steve,
>>Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
#Customization could not be loaded because the application domain could not be created.
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly. If it could not install correctly, I assume that there might be something wrong when you
publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
Sharepoint server 2013 configuration issue - failed to create configuration database
Hi All,
I have installed the SharePoint server 2013. After installing the SharePoint products, the configuration stops at failure of creating configuration database.
Some system configuration & info:
- 1 Domain controller server run Active Directory services on Windows server 2008 R2 SP1 (PC1 with name DC.Brainfiniti.com)
- 1 Server which is used for installing Sharepoint server 2013 and MS SQL server 2008 R2 SP1 (PC2 with name App.Brainfiniti.com)
- All of PCs were satisfied the requirement of Sharepoint server 2013
- Firewall turned off & No antivirus tool was installed.
- During installing of Sharepoint, choose "Complete" option: Farm mode and use SQL Server instead of SQL Express.
- During configuration, created a new farm with a domain user account.
- Use domain account to log on and install, configure in Sharepoint & SQL server (PC2)
ATTEMPTS:
1. Tried install and set up all of steps with just 1 account - domain administrator.
2. Tried with separate domain account:
- SQL Service account use for:
+ Install SQL server 2008
+ Connect all SQL services
+ Admin for SQL server
- Setup account use for:
+ Member of local administrator group in PC2
+ Install Sharepoint
+ Run Configuration wizard
+ Was granted permission in SQL database: dbcreator, securityadmin, sysadmin and deselect serveradmin role.
+ Was choose for the database account in configuration database step
Also tried with SQL service account in this step.
3. Tried with Standalone mode for Sharepoint installing
4. Trie with domain name: Brainfiniti.local
5. Tried with some another solution from topic relate to database configuration in our community but not successful.
But all attempts are failed at this configuration database step :'(
Please correct me if I am going wrong by missing something or do I need to start/install some services.
Screenshot Attached
Sorry! Cannot add screenshot because my account is still not verified. Will add later.
LOG ENTRY:
01/23/2013 06:58:28 1 INF Entering function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
01/23/2013 06:58:28 1 INF Found a task by the name of adminvs in the task collection
01/23/2013 06:58:28 1 INF Entering function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:28 1 INF Entering function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Entering function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Trying to start service W3SVC and waiting 180 sec to do so
01/23/2013 06:58:28 1 INF service W3SVC is Running, nothing to do
01/23/2013 06:58:28 1 INF starting service W3SVC (it may already be started)
01/23/2013 06:58:28 1 INF Leaving function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Leaving function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Trying to see if port 40993 is free on machine APP. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF A SocketException was thrown with
SocketError ConnectionRefused
01/23/2013 06:58:30 1 INF Connect has been refused for port 40993, so we will consider this a free port
01/23/2013 06:58:30 1 INF Have not found a free port yet. Number of tries is 1. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF Adding port 40993 to the exclusion list so it is not chosen again during this run
01/23/2013 06:58:30 1 INF Leaving function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:30 1 INF Leaving function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
I just post a part of its logs which contain "error" string because it's too long.
According this log, there is a error in port connection but i've turned firewall off ???
Please help me with this mix up :'(
p/s: sorry for my English!
Thanks,
Hien HoangBelow is the logs entry with "ERR" marked line:
01/23/2013 07:03:17 9 INF Now joining to farm at server app.brainfiniti.com database SharePoint_Config
01/23/2013 07:04:12 9 ERR Task configdb has failed with an unknown exception
01/23/2013 07:04:12 9 ERR Exception: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not
be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 ERR An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception
information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Creating the OnTaskStop event for task configdb
01/23/2013 07:04:12 9 ERR Task configdb has failed
01/23/2013 07:04:12 9 INF friendlyMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 9 INF debugMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Firing the OnTaskStateChanged event for task configdb
01/23/2013 07:04:12 9 INF Entering function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName
for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName
is configuration database
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Received an TaskStateEventHandler event. task:configdb TaskBase.State:stopped
01/23/2013 07:04:12 9 INF Entering function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Incremented the number of tasks failed to 1
01/23/2013 07:04:12 9 INF Leaving function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Task configdb has stopped and failed. Total failed is now 1
01/23/2013 07:04:12 9 INF Leaving function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Invoking the UI thread with the task state chagne event
01/23/2013 07:04:12 1 INF Entering function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 1 INF Received an TaskStateEventHandler event. task:configdb
TaskBase.State:stopped TaskBase.TaskResultconfigdb
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 ERR Task configdb has stopped and failed. Total failed
is now 1
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
disconnect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter disconnect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
connect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter connect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
create
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter create in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
for language English (United States)
01/23/2013 07:04:12 1 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
is Failed to create the configuration database.
01/23/2013 07:04:12 1 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Updating the task label below the progress bar Failed to
create the configuration database.
01/23/2013 07:04:12 1 INF Entering function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Leaving function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Last message from task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Updating the task additional notification information below
the progress bar An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Leaving function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 9 INF Sleeping an extra 1 ms so things don't go too fast for the user for this
task
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background with our
trademarked image
01/23/2013 07:04:12 9 INF Leaving function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Leaving function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Leaving function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Leaving function TaskThread.ExecuteTask
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName for language English (United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName is configuration database
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Task configuration database failed, so stopping execution of the engine
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key disconnect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter disconnect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key connect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter connect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key create
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter create in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel for language English
(United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel is Failed to create the configuration
database.
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Failed to create the configuration database.
An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 4 INF Entering function TaskDriver.NotifyTaskSummary -
Hi,
I am installing OBI EE 11.1.1.7.0 on Windows 7 64-bit. Followed below steps:-
1. Install WLS 10.3.6 - Success
2. Create RCU for OBI - Success
3. Install OBI with "Software only Install" - Success
4. Run "config.bat" to configure OBI - Fail
The configuration fails at Step-1 , when setting domain for WLS. Would appreciate if someone can help me out here.
Below is the content in log file from where it started to fail - *"install2013-05-31_11-44-29PM.log"*
[2013-05-31T23:46:52.808+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Domain port set to: 7001
[2013-05-31T23:46:53.938+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Assigning Port: 9556 to: NODE_MANAGER_PORT
[2013-05-31T23:46:53.938+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Starting initial node manager configuration...
[2013-05-31T23:46:53.938+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Found listening port from node manager properties: null
[2013-05-31T23:46:53.938+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Unable to reuse node manager - port is null
[2013-05-31T23:46:53.948+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] No reusable node manager found.
[2013-05-31T23:46:53.948+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Completed initial node manager configuration.
[2013-05-31T23:46:53.948+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Assigning Port: 9556 to: NODE_MANAGER_PORT
[2013-05-31T23:46:53.948+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Nodemanager port set to: 9556
[2013-05-31T23:46:57.793+05:30] [as] [WARNING] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] CSF Entries will not be parsed since the AdminServer is unreachable
[2013-05-31T23:46:57.827+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Executing a Jaxb workflow ...
[2013-05-31T23:46:57.828+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Begining Oracle Fusion Middleware Configuration ...
[2013-05-31T23:46:57.829+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Begining Oracle Fusion Middleware Configuration ...
[2013-05-31T23:46:57.851+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] ENTRY ASDomain.createDomain
[2013-05-31T23:46:57.852+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] ENTRY ASDomain.createDomain
[2013-05-31T23:46:57.853+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: ENTRY........
[2013-05-31T23:46:57.853+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@6274bff8
[2013-05-31T23:46:57.853+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: 2........
[2013-05-31T23:46:57.854+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: Set the Extion Id to START........
[2013-05-31T23:46:57.854+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: Did the assignment...
[2013-05-31T23:46:57.854+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: EXIT........
[2013-05-31T23:47:24.094+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] RETURN: createDomain
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] RETURN: createDomain
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] ENTRY ASDomain.startDomain
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: ENTRY........
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@37d9ddba
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: 2........
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: Set the Extion Id to START........
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: Did the assignment...
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: EXIT........
[2013-06-01T01:28:05.244+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0]
[2013-06-01T01:28:05.244+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
[2013-06-01T01:28:05.244+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)Log file -> *"install2013-05-31_11-44-29PM.out"*
CLASSPATH=D:\BI_Home\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0_1\lib\tools.jar;D:\BI_Home\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\BI_Home\WLSERV~1.3\server\lib\weblogic.jar;D:\BI_Home\modules\features\weblogic.server.modules_10.3.6.0.jar;D:\BI_Home\WLSERV~1.3\server\lib\webservices.jar;D:\BI_Home\modules\ORGAPA~1.1/lib/ant-all.jar;D:\BI_Home\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;C:\Program Files (x86)\Java\jre6\lib\ext\QTJava.zip;D:\BI_Home\utils\config\10.3\config-launch.jar;D:\BI_Home\WLSERV~1.3\common\derby\lib\derbynet.jar;D:\BI_Home\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\BI_Home\WLSERV~1.3\common\derby\lib\derbytools.jar;;
Initializing WebLogic Scripting Tool (WLST) ...
Jython scans all the jar files it can find at first startup. Depending on the system, this process may take a few minutes to complete, and WLST may not return a prompt right away.
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : D:\BI_Home\Oracle_BI1\install\config\\StartUtil64.dll
DEBUG : Loading DLL : D:\BI_Home\Oracle_BI1\install\config\\StartUtil64.dll
DEBUG : Loaded DLL : D:\BI_Home\Oracle_BI1\install\config\\StartUtil64.dll
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
... 19 moreThanks in advance.Friend, Even i am installating 11.1.1.7 in my Windows 7 (64 Bit)
At very 1st stage i got error..because i directly tried to install RCU by clicking on the rcu.bat , so 1st i have to install Weblogic server after seeing your steps...
Although there are many sites to help us installing OBI 11.1.1.7, i am currently following this http://satyaobieesolutions.blogspot.com.au/2013/05/obiee-111170-simplesoftware-installation.html which explained very well in detail....!!!!!!!
You might have missed at any step onthis..check once
Please mark if this is helpful...!!!!!!!!!!!
Edited by: KBabu on Jun 3, 2013 12:31 AM -
BPM for Weblogic configuration is failed
1, I install BPM for Weblogic.
2, I create a domain for weblogic using config tool and start it.
3, I create a new directory.
However, the configuration is failed.
The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
The log is as follows:
For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear, to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear, to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed. at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48) at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185) at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536) at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160) at org.python.core.PyMethod.__call__(PyMethod.java:96) at org.python.core.PyObject.__call__(PyObject.java:248) at org.python.core.PyObject.invoke(PyObject.java:2016) at org.python.pycode._pyx17.deploy$8(<iostream>:223) at org.python.pycode._pyx17.call_function(<iostream>) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:404) at org.python.core.PyFunction.__call__(PyFunction.java:184) at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:256) at org.python.core.PyFunction.__call__(PyFunction.java:169) at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyCode.call(PyCode.java:14) at org.python.core.Py.runCode(Py.java:1135) at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167) at weblogic.management.scripting.WLST.main(WLST.java:129) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.WLST.main(WLST.java:29)
Exiting WebLogic Scripting Tool.
<Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
Do you want to cancel this wizard?Hi,
Thanks for your reply. I change the file and reconfigure the BPM for weblogic. However, it is still failed in 70-72%.
-------------------log message-------------------------------
TO_MSG PATH=/root/bea/wlserver_10.3/server/bin:/root/bea/modules/org.apache.ant_1.6.5/bin:/root/bea/jrockit_160_05/jre/bin:/root/bea/jrockit_160_05/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
TO_MSG
TO_MSG Your environment has been set.
TO_MSG
TO_MSG CLASSPATH=/root/bea/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/jrockit_160_05/lib/tools.jar:/root/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/root/bea/wlserver_10.3/server/lib/weblogic.jar:/root/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/root/bea/wlserver_10.3/server/lib/webservices.jar:/root/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/root/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/root/OraBPMwlHome/lib/fuego.boot.jar:/root/OraBPMwlHome/bin/./:/root/OraBPMwlHome/bin/./lax.jar::/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar
TO_MSG
TO_MSG Initializing WebLogic Scripting Tool (WLST) ...
TO_MSG
TO_MSG Welcome to WebLogic Server Administration Scripting Shell
TO_MSG
TO_MSG Type help() for help on available commands
TO_MSG
TO_MSG Starting server BPMServer
TO_MSG Please see the server log files for startup messages available at /root/weblogic3/bpm
TO_MSG Starting weblogic server ...
TO_MSG WLST-WLS-1249792014056: [WARN ] -XX:MaxPermSize=256m is not a valid VM option. Ignoring
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ26¥ネニ58ᄃメ CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-ia32 from BEA Systems, Inc.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ00ᄃメ CST> <Info> <Management> <BEA-140013> </root/weblogic3/bpm/config/config.xml not found>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ00ᄃメ CST> <Info> <Management> <BEA-141254> <Generating new domain directory in /root/weblogic3/bpm>
TO_MSG .....WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ12ᄃメ CST> <Info> <Management> <BEA-141255> <Domain generation completed in 12,326 milliseconds.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ13ᄃメ CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ15ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ15ᄃメ CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ16ᄃメ CST> <Notice> <Log Management> <BEA-170019> <The server log file /root/weblogic3/bpm/servers/BPMServer/logs/BPMServer.log is opened. All server side log events will be written to this file.>
TO_MSG ...WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ24ᄃメ CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
TO_MSG ....WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ34ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ34ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ34ᄃメ CST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "BPMServer" for domain "bpm" running in Development Mode>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ36ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ36ᄃメ CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
TO_MSG Server started successfully.
TO_MSG Started Server. Trying to connect to the server ...
TO_MSG Connecting to t3://localhost.localdomain:7001 with userid weblogic ...
TO_MSG Successfully connected to Admin Server 'BPMServer' that belongs to domain 'bpm'.
TO_MSG
TO_MSG Warning: An insecure protocol was used to connect to the
TO_MSG server. To ensure on-the-wire security, the SSL port or
TO_MSG Admin port should be used instead.
TO_MSG
TO_MSG Location changed to edit tree. This is a writable tree with
TO_MSG DomainMBean as the root. To make changes you will need to start
TO_MSG an edit session via startEdit().
TO_MSG
TO_MSG For more help, use help(edit)
TO_MSG
TO_MSG Starting an edit session ...
TO_MSG Started edit session, please be sure to save and activate your
TO_MSG changes once you are done.
TO_MSG creating mbean of type JMSServer ...
TO_MSG creating mbean of type JMSSystemResource ...
TO_MSG creating mbean of type SubDeployment ...
TO_MSG creating mbean of type Queue ...
TO_MSG creating mbean of type Topic ...
TO_MSG creating mbean of type ConnectionFactory ...
TO_MSG creating mbean of type ConnectionFactory ...
TO_MSG creating mbean of type Server ...
TO_MSG creating mbean of type JDBCSystemResource ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type JDBCSystemResource ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Realm ...
TO_MSG creating mbean of type RoleMapper ...
TO_MSG creating mbean of type CredentialMapper ...
TO_MSG creating mbean of type CertPathProvider ...
TO_MSG creating mbean of type Authorizer ...
TO_MSG creating mbean of type Adjudicator ...
TO_MSG creating mbean of type AuthenticationProvider ...
TO_MSG creating mbean of type AuthenticationProvider ...
TO_MSG setting attributes for mbean type JMSServer
TO_MSG setting attributes for mbean type JMSSystemResource
TO_MSG setting attributes for mbean type SubDeployment
TO_MSG setting attributes for mbean type Queue
TO_MSG setting attributes for mbean type Topic
TO_MSG setting attributes for mbean type JMSConnectionFactory
TO_MSG setting attributes for mbean type JMSConnectionFactory
TO_MSG setting attributes for mbean type Server
TO_MSG setting attributes for mbean type JDBCSystemResource
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
TO_MSG setting attributes for mbean type JDBCDriverParams
TO_MSG setting attributes for mbean type JDBCDataSource
TO_MSG setting attributes for mbean type DefaultIdentityAsserter
TO_MSG setting attributes for mbean type SecurityConfiguration
TO_MSG setting attributes for mbean type SecurityParams
TO_MSG setting attributes for mbean type EmbeddedLDAP
TO_MSG setting attributes for mbean type SecurityParams
TO_MSG setting attributes for mbean type Domain
TO_MSG setting attributes for mbean type JDBCDataSource
TO_MSG setting attributes for mbean type JDBCXAParams
TO_MSG setting attributes for mbean type JDBCDataSourceParams
TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
TO_MSG setting attributes for mbean type JDBCDriverParams
TO_MSG setting attributes for mbean type JDBCDataSourceParams
TO_MSG setting attributes for mbean type JDBCSystemResource
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG Saving all your changes ...
TO_MSG Saved all your changes successfully.
TO_MSG Your edit session is not stopped, you can continue your edits.
TO_MSG Activating all your changes, this may take a while ...
TO_MSG The edit lock associated with this edit session is released
TO_MSG once the activation is completed.
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute InternalAppsDeployOnDemandEnabled on weblogic.management.configuration.DomainMBeanImpl@fffe8220([bpm]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@1759a12([bpm]/Log[bpm]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute ListenAddress on weblogic.management.configuration.ServerMBeanImpl@2ddd7637([bpm]/Servers[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@2df105fa([bpm]/Servers[BPMServer]/Log[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.WebServerLogMBeanImpl@2df106e5([bpm]/Servers[BPMServer]/WebServer[BPMServer]/WebServerLog[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG
TO_MSG The following non-dynamic attribute(s) have been changed on MBeans
TO_MSG that require server re-start:
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Log,Server=BPMServer
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Server
TO_MSG Attributes changed : ListenAddress
TO_MSG
TO_MSG MBean Changed : com.bea:Name=bpm,Type=Log
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG MBean Changed : com.bea:Name=bpm,Type=Domain
TO_MSG Attributes changed : InternalAppsDeployOnDemandEnabled, ProductionModeEnabled
TO_MSG
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=WebServerLog,Server=BPMServer,WebServer=BPMServer
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG Activation completed
TO_MSG Creating a user ...
TO_MSG
TO_MSG Created user successfully
TO_MSG Deploying application from /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ28¥ネニ01ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ28¥ネニ08ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine [archive: /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear], to BPMServer .>
TO_MSG .................Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ29¥ネニ48ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 08-workspace-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ30¥ネニ45ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 09-feeds-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ00ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 06-workspaceadmin-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ31ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 07-papiws-wls103-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear], to BPMServer .>
TO_MSG ..WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ48ᄃメ CST> <Error> <HTTP> <BEA-101220> <Error occurred while setting document root for "weblogic.servlet.internal.WebAppServletContext@30302d0 - appName: '07-papiws-wls103-XAFDIDS.ear', name: 'papiws', context-path: '/papiws', spec-version: '2.5'" to "/root/weblogic3/bpm/servers/BPMServer/tmp/_WL_user/07-papiws-wls103-XAFDIDS.ear/f0r1c0/papiws.war".>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ48ᄃメ CST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1249792304208' for task '5'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'papiws''
TO_MSG WLST-WLS-1249792014056: weblogic.application.ModuleException: Failed to load webapp: 'papiws'
TO_MSG WLST-WLS-1249792014056: at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
TO_MSG WLST-WLS-1249792014056: Truncated. see log file for complete stacktrace
TO_MSG WLST-WLS-1249792014056: java.io.IOException: Error opening file
TO_MSG WLST-WLS-1249792014056: at java.util.zip.ZipFile.open(Native Method)
TO_MSG WLST-WLS-1249792014056: at java.util.zip.ZipFile.<init>(ZipFile.java:117)
TO_MSG WLST-WLS-1249792014056: at java.util.zip.ZipFile.<init>(ZipFile.java:133)
TO_MSG WLST-WLS-1249792014056: at weblogic.utils.classloaders.ZipClassFinder.<init>(ZipClassFinder.java:23)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.io.ArchivedWar$WebInfClassesFinder.<init>(ArchivedWar.java:290)
TO_MSG WLST-WLS-1249792014056: Truncated. see log file for complete stacktrace
TO_MSG WLST-WLS-1249792014056: >
TO_MSG WLST-WLS-1249792014056: java.io.FileNotFoundException: /root/weblogic3/bpm/config/config.xml (Too many open files)
TO_MSG WLST-WLS-1249792014056: at java.io.FileOutputStream.open(Native Method)
TO_MSG WLST-WLS-1249792014056: at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
TO_MSG WLST-WLS-1249792014056: at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
TO_MSG WLST-WLS-1249792014056: at weblogic.utils.FileUtils.writeToFile(FileUtils.java:115)
TO_MSG WLST-WLS-1249792014056: at weblogic.utils.Fil -
Configuration is failed - BPM for Weblogic 10.3.1
1, I install BPM for Weblogic.
2, I create a domain for weblogic using config tool and start it.
3, I create a new directory.
However, the configuration is failed.
The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
The log is as follows:
For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear], to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 [archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear], to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed. at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48) at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185) at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536) at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160) at org.python.core.PyMethod.__call__(PyMethod.java:96) at org.python.core.PyObject.__call__(PyObject.java:248) at org.python.core.PyObject.invoke(PyObject.java:2016) at org.python.pycode._pyx17.deploy$8(<iostream>:223) at org.python.pycode._pyx17.call_function(<iostream>) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:404) at org.python.core.PyFunction.__call__(PyFunction.java:184) at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:256) at org.python.core.PyFunction.__call__(PyFunction.java:169) at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyCode.call(PyCode.java:14) at org.python.core.Py.runCode(Py.java:1135) at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167) at weblogic.management.scripting.WLST.main(WLST.java:129) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.WLST.main(WLST.java:29)
Exiting WebLogic Scripting Tool.
<Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
Do you want to cancel this wizard?Hi Ye,
I noticed this afternoon that Oracle's refering to Oracle WebLogic 10.3.1 as "Oracle WebLogic 11g".
Know this comes as no surprise to you, but when I tried to install Oracle BPM 10gR3 Enterprise on WebLogic 11g (WebLogic 10.3.1) this afternoon it failed. A friend pointed out to me that Oracle WebLogic 11g does not support the DataDirect JDBC driver. Since Oracle BPM Enterprise 10gR3 uses this driver to connect to both its Engine database and Directory Service databases, he's thinking this might be the cause of our problem.
It would be worth verifying this with Support. Here's what I think they'll point you to. The Oracle BPM 10gR3 release notes(http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/relnotes/release_notes_OracleBPM10gR3.htm#N65589) indicate that the only WebLogic application servers supported are Oracle WebLogic 10.3 (10gR3), Oracle WebLogic 10.0 MP1.
Again, talk to Support, but I don't think there's a workaround. The only thing I think you can do is to uninstall WebLogic 10.3.1 and then install WebLogic 10.3 if you want to install Oracle BPM 10gR3 Enterprise on it.
Dan -
Error installing OBIEE 11g on Linux 64 bits - Configuration Assistant fails
Hello,
I am trying to install OBISE1 on Oracle Linux 5 - 64 bits.
I've followed these steps:
1) Install Oracle DB
2) Install jdk Linux 64 bits (jdk1.7.0)
3) Install WebLogic
4) Install RCU
5) Install OBI 11g (Software only installation)
Until here, all is correct.
6) Configuration assistant failed:
[2011-09-12T12:04:58.844+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0]
[2011-09-12T12:04:58.845+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-09-12T12:04:58.846+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
I have fount posts with a similar problem, but is over Windows.
I appreciate any ide/suggestion.
Thank you in advance.
Regards,I have seen that WebLogic is shut down, so I am trying to start up, but I can't:
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Starting WLS with line:
/usr/java/jdk1.7.0/bin/java -jrockit -Xms512m -Xmx512m
-Dweblogic.Name=AdminServer
-Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
-Dweblogic.ProductionModeEnabled=true -da
-Dplatform.home=/root/Oracle/Middleware/wlserver_10.3
-Dwls.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/root/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/root/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
weblogic.Server
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
I have modified /etc/profile, including JAVA_HOME and PATH with the java PATH. And it is ok, because if I executed java -version I can see the new jdk:
java version "1.7.0"
Java(TM) SE Runtime Environment (build 1.7.0-b147)
Java HotSpot(TM) 64-Bit Server VM (build 21.0-b17, mixed mode)
Any idea¿? -
OPMN configuration assistant failed while applying patch on SOA 10.1.3.1
Hi All,
I tried upgrading the SOA Server from version 10.1.3.1 to 10.1.3.4 by applying a patch . But while applying patch I faced an error “OPMN Configuration Assistant failed “ . When I gave opmnctl status command in the command prompt I found that the issue is with starting up the HTTP Server . Rest all components of opmn were up and running.
The error msg i got is:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Output generated from configuration assistant "Run One-off OPatches":
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
ERROR: OPatch failed because of Inventory problem.Cannot find Oracle Universal Installer shared library
OPatch returns with error code = 100
Configuration assistant "Run One-off OPatches" succeeded
Output generated from configuration assistant "OPMN Configuration Assistant":
opmnctl: starting opmn and all managed processes...
================================================================================
2 of 3 processes started.
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1392512192,pid=4728)
failed to start a managed process after the maximum retry limit
Log:
D:\product\10.1.3.1\OracleAS_3\opmn\logs\\HTTP_Server~1.log
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
can you please suggest a way out for this error .
Edited by: user10451494 on May 24, 2009 10:24 AMDid you check what's in D:\product\10.1.3.1\OracleAS_3\opmn\logs\HTTP_Server~1.log file? Also check what error is reported in D:\product\10.1.3.1\OracleAS_3\Apache\Apache\logs\error.log file.
Thanks
Shail -
Oracle 8i Configuration Tools Fails on Install
I found problems on the Oracle 8i Installation, on my Windows XP Desktop (SP1). I've selected the Minimal Installation, and all goes on. When they reach the Configuration Tools Section of Setup...
It found the following fails:
- Net8 Configuration Assistant, fail:
Class not found: Files\Oracle\Ora81\network\jlib
- Oracle Database Configuration Assistant, fail:
There is no available output for this tool.
Apparently, it doesn't create the Starter Database (my main need). I'm newbie in Oracle Database world (I'm MS-SQL Server DBA), so, if anyone can help me, I'll be glad...
Thanks,
RafaelPlease turn on the debug trace in tip.properties
Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
b2b.oracle.tip.DiagnosticLevel = DEBUG
oracle.tip.LogType = text
If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
Please gather as much trace information as possible when you start the B2B Server manually.
If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
Then use the following command to start B2B:
opmnctl startproc process-type=B2BServer
Thanks,
Eng -
INS-20802 Oracle net configuration assistant failed on windows server 2003 R2
Hi all,
I have windows server 2003 r2 installed on VM and tried installing oracle database 11g r2.
But got Oracle net configuration assistant failed. Below is the log
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = C:\oracle\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 0
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@c0d228
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1257f0e
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Created config job for Oracle Net Configuration Assistant
INFO: Created config job for Oracle Database Configuration Assistant
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1ae9cec
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeToolsInAggregate action performed
INFO: Exiting ConfigClient.executeToolsInAggregate method
INFO: Calling event ConfigToolsExecuted
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@140de18
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1b52041
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.1
INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@b970f5
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.1
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@969e08
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@6155e3
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.2
INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1e976fd
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.2
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed ConfigurationHi Srini,
The issue is resolved. Thanks for your response.
The issue is, windows 2003 server is 32 bit and I am trying to install 64 bit 11g database. I tried installing 32 bit 11g database. Before that I have cleared the traces of virtual box in my host system and reinstalled it and tried. It worked out.
Thanks
Sunil -
Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4
I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec")
Maybe you are looking for
-
Making a PDF with "Outline" and Bookmarks Using Pages
Hi, I'm using Pages 1 and I have tried making a PDF with outline breaks but I failed. I thought using paragraph styles for my document would work but when I exported my document to PDF, all I got was a PDF that only has the thumbnails view but not th
-
Preview app issue after update to Mavericks
Since I updated to OS Mavericks my preview app has not been functioning properly. When the app is open when viewing PDFs a window (accompanied by a progress bar) pops up quite frequently that says "Saving changes... '#' documents remaining", with the
-
It's all gone pear shaped - no HD log & transfer or ws export to Apple TV
Hi I have tried everything but admit to being stumped now. Problems are as follows: About 3 months ago I saved a large number of .MTS files from my Panasonic HDC-SD1 high def camcorder. They loaded into FCE4 fine and I could log and transfer them all
-
Check a range of values in the pai section of a dynpro
Hi, I have a week timetable, and for each day the user has to introduce a range of hours. I need to control that the hours the user introduces is in a correct format (hh:mm). I've seen that it's possible to set the valid range of values of an element
-
Dreamweaver insists on latest version of Flash
If I insert an SWF file into a Dreamweaver page the browser comes up with a message saying my Flash player isn't up to date and I have to download a new version of the player. But if I dial up the SWF file itself, it plays perfectly. I tried cutting