Configuration file for pkcs11 security provider

Hi all,
I'm using Mandriva 2008.0 . In the jdk 1.5.0 documentation, it is given that, the security provider pkcs11 can be configured statically by adding an entry, as shown below, in the java.security file present in the directory jre/lib/security/.
*# configuration for security providers 1-6 ommitted*
security.provider.7=sun.security.pkcs11.SunPKCS11 /opt/bar/cfg/pkcs11.cfg
Where can I get the configuration file (pkcs11.cfg) from? Please direct me how to proceed.
Thanks.

Hi,
I went through that Java SE6 documentation link. It describes the contents of the configuration file for pkcs11. But I couldn't find the information of where can I get the configuration file for pkcs11 security provider from.
Thanks.

Similar Messages

Providing configuration file for SQL 2012 Express installation which installing HPC 2012 R2

Hi guys,
I need to know if there is any way to provide configuration file for SQL 2012 Express installation which installing HPC 2012 R2?
I am scripting installation on HPC 2012 R2 with default SQL 2012 Express edition but I am not able to find any option to provide a configuation file for SQL 2012 Express installaiton.
Thanks,
Vivs.

Hi Vivs,
As my understanding, you want to generate a configuration file and install SQL Server 2012 express edition using that configuration file.
If that is the case, firstly, you could generate the configuration file following the steps below since express edition is run in AutoAdvance mode which skips "Ready to Install" page.
1.Double-click SQL Server installation file in your local drive, you will see that the file will be extracted to a temporary folder. Please make a note of what directory it is extracted to. For example, it could be in c:\ followed by a folder name which
will be a set of random letters and numbers "gy7h8hjhhj67rfs7".
2.Cancel installation. Then click on the Start button on the task bar, click run, type the command cmd.exe, and go to that directory via cmd.
3.Execute the following command: setup.exe /ACTION=INSTALL /UIMODE=Normal
4.Follow the wizard through to the 'Ready to Install' page. The path to the configuration file is specified in the 'Ready to Install' page in the configuration file path section.
5.Cancel the setup without actually completing the installation, to generate the INI file.
Secondly, to install SQL Server using Command Prompt, go to the SQL Server installation media root (the temporary folder) from the command prompt and specify the ConfigurationFile.ini as a parameter as shown below.
Setup.exe /ConfigurationFile=ConfigurationFile.INI
For more information about the process, please refer to the article:
http://www.mssqltips.com/sqlservertip/2511/standardize-sql-server-installations-with-configuration-files/
Regards,
Michelle Li

Failed to load configuration file for the workflow

There are two of us who have full control on our Sharepoint 2013 site. I'm able to create workflows and publish them fine. The other user is able to create workflows, but he gets an error when trying to run them. I tried opening his workflow and got
the error "Failed to load configuration file for the workflow."
Any ideas?

Hi Carltonw1,
Based on your description, I recommend to verify the things below:
Clear the SharePoint Designer cache and then open the workflow.
Ask the user to open the workflow in SharePoint Designer and check if the workflow contains error.
Ask the user to create the same workflow and associated with another list to see how it works.
Check the ULS log for more detailed error message.
To reproduce this issue, could you please provide the detailed steps in the workflow for further research?
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

How to create multiple pof configuration files for c# client

Is there a way to have multiple pof files for c# coherence client?
Can I create a file called my-pof-config.xml with the following line...
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
<include>assembly://Coherence/Tangosol.Config/coherence-pof-config.xml</include>
<include>file://pof-config.xml</include>
and here is what pof-config.xml file look like
<?xml version="1.0" encoding="UTF-8"?>
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
In my C# visual studio project, this is where I load my-pof-config.xml in app.config
<coherence>
<cache-factory-config>coherence.xml</cache-factory-config>
<cache-config>coherence-cache-config.xml</cache-config>
<pof-config>my-pof-config.xml</pof-config>
</coherence>
and this is what I saw in the log...
2012-02-23 14:35:35,529 DEBUG Coherence (null) - 2012-02-23 14:35:35.529 level(thread=System.Threading.Thread): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
2012-02-23 14:35:35,545 DEBUG Coherence (null) - 2012-02-23 14:35:35.545 level(thread=System.Threading.Thread): Loaded included POF configuration from "EmbeddedResource(Uri = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml, AbsolutePath = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml)"
2012-02-23 14:35:35,623 DEBUG Coherence (null) - 2012-02-23 14:35:35.623 level(thread=ExtendTcpCacheServiceCSharp:TcpInitiator): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
I don't see pof-config.xml is loaded at "Loaded included POF configuration....". How do I get around it so I can load multiple pof configuration files for c# client?

Hi,
Not sure about C# but I would suggest try removing file:// from
<include>file://pof-config.xml</include>and keep pof-config.xml and my-pof-config.xml in the same directory.
Hope this helps!
Cheers,
NJ

Configuration file for servlets

Hi, everyone
I have one problem,I can't solve:
I want write configuration file for several servlets (by incapsulating my static class Config in DBServlet subclass), but I don't know how can I find this config file in runtime( it will be placed, as I think in root documents directory of web-server).
I can't use no method of DBServlet and HTTPRequest on its initialization phase (suche methods as getServletContext, getServerName, getServerPort and others), so
I can't get real path of root documents directory of web-server.
If I will read this file by URL like "localhost/config.cfg" there will be problem in web-server configuration with access permissions, I think.
Is there some standard ways to find and read in servlet runtime from file , which is placed in root documents directory of web-server.
Thanks in advance, Ed

Ed,
Your configuration file must be in your CLASSPATH.
Regards
Blaise

Failed to load the configuration file for the workflow

Hi experts, yesterday I created and publish custom workflow using SPD from client pc using site administrator account but today its shows error message. I tried creating new test workflows, edit and publish to think it will push a fresh SPD settings
in working condition and it works pretty right.
But the thing I noticed after closing SPD Im not able to re-open workflows and it gives the same error message Failed to load the configuration file for the workflow. This issue only happen today since day one I used SPD and all the time
Im using the same pc.
Any ideas will be appreciated.
Cheers, R2C3 ----------------------------------- starting sharepoint :)

HI
Maybe you have permission problem or there is invalid xoml murkup.
To verify this from SharePoint Designer use the following steps.
In Office SharePoint Designer, in the folder list, select the plus sign next to Workflows library to expand it
1.Next select the plus sign of the workflow in question to expand it
2.Double-click the configuration file (Workflow_name.xoml.wfconfig.xml) to open it
3.Right-click on the page, and then select Verify well-formed XML
4.Correct any errors and save the file
5.Reopen the workflow to test
Also double check that you are using SPD with the same credentials you created workflow
Hope this will help.
Regards,
Marcin

Single XML configuration file for all the SSIS packages(including parent and child packages)

Hi
I have some 16 ssis packages. source Db and destination Db for these packages are common. I am calling these child packages in a master package.
I want to use only one XML config file for this master.
How do i use same for all child packages?
and can i do it with parent package variable?

I created a master package with a variable master, and in value i have entered the configuration file path.
Hi vjp dinu,
You should create variables in the parent package to pass values to variables in each child package rather than pass the file path of the XML Configurations file of the parent package.
As Visakh mentioned, you can achieve your goal by creating corresponding variables in the parent package for each child package, and enable Package Configurations for the parent package so that you can control the values through the XML Configurations file
for the variables of the parent package.
Supposing there is a variable FilePath in child package 1, a variable ServerName in child package 2, then, we need to create two variables pFilePath, pServerName in the parent package. After configuring the Parent package variable in each child package (e.g.
mapping pFilePath to FilePath, pServerName to ServerName), you can enable XML Configurations for the parent package, and expose the value property for both pFilePath and pServerName variables. In this way, you can modify the XML Configurations file of the
parent package and the specified values will passed to the child packages.
Reference:
http://microsoft-ssis.blogspot.com/2011/06/passing-variables-from-parent-package.html
Regards,
Mike Yin
TechNet Community Support

Watch configuration files for changes

I changed web.xml to get charting to work and it did (but it worked without restarting CF)
I do not have the Watch configuration files for changes option checked in cfAdmin.
I went to make the same changes on other boxs and CF "undeployed" itself.
I am running CF8 on Solaris. I recently upgraded the JVM to 1.6_10

See
http://www.stillnetstudios.com/2008/03/04/getting-cfstat-to-work.

Where is the configuration file for my message server ?

Hi:
I am in charge for a message server version upration from 5.1 to 5.2, My question is very simply , I can not find configuration file for message server,when I execute start-msg [smtp | imap | pop | store | http] which configuration file it will read ?
and /usr/iplanet/server5/slapd-www/config/slapd.conf
is my ldap server configuration file ?
and the following three file is mta related file ?
/usr/iplanet/server5/msg-www-1/imta/config/dispatcher.cnf
/usr/iplanet/server5/msg-www-1/imta/config/job_controller.cnf
/usr/iplanet/server5/msg-www-1/imta/config/imta.cnf
My question is very simple and I am a new junior for ims . Anyway Thanks !!
$ imsimta version
iPlanet Messaging Server 5.2 (built Feb 21 2002)
libimta.so 5.2 (built 15:07:23, Feb 21 2002)
SunOS ctidml 5.8 Generic_108528-27 sun4u sparc SUNW,Ultra-5_10

There is NO ONE messaging server configuration file.
The store configuration is read from the configuration ldap server on startup, and cached in temporary files, msg.cnf and local.cnf. Do not attempt to edit these files, as that won't work.
Use the configutil utility to see what the store configuratin is

Best practice with respect to wcf configuration files for SSIS

So after reading a lot of posts and blogs on how to configure SSIS to read from configuration files , I am still not clear and would like any expert to provide a definitive stance. In my case the WCF service consumption is wrapped into a separate assembly.
I am referencing the assembly in an embedded C# script within my SSIS package.
When I make the helper class call to the webservice , I get the endpoint not found WCF exception.
Keep in mind I am running this from VS 2012 IDE and did the following to make sure the WCF call works:
1. Googled and found that you need to have config entries in DtsDebugHost.exe.config file. But it still did not work
2. Had the same entries in the associated app.config file for C# script but it still did not work.
It seems like SSIS is very fragile w.r.t consuming WCF entires in a config file. Is the best practice to just have the end point created in code and externalize the end point as a SSIS variable / xml file or is there really a way to get these config files working.
Attached is the wcf snippet of my config file.
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="ITransactionProcessor">
<security mode="TransportWithMessageCredential" />
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="https://ics2wstest.ic3.com/commerce/1.x/transactionProcessor" binding="basicHttpBinding" bindingConfiguration="ITransactionProcessor" contract="CyberSource.ITransactionProcessor" name="portXML" />
</client>
</system.serviceModel>
SM

I have the code working without use of config files. I am just disappointed that it is not working using the configuration files. That was one of the primary intents of my code re-factoring.
Katherine
Xiong , If you are proposing this as an answer then does this imply that Microsoft's stance is not to use configuration files with SSIS?? Please answer.
SM

How to generate an XML Configuration File for EBS Source Type

Hi,
We have installed SES, I want to integrate it to enable for searching repository contracts.
In the sources I have selected oracle.apps.okc.repository.textsearch.server.RepHeaderSearchExpVO.
For this source I need to specify the Configuration URL.
Here I need to provide the path for configuration XML file. But before that I need to generate the XML Configuration file.
Is there any steps on how we can create this XML file.
like I would want to know how we can create the XML file and on which folder on the server should I be putting it
Thanks

Hi there,
We are running into same issue and need the exact same information. Can someone help with this question on priority?
Thanks,
Darshan

Configuration file for smart view for Hyperion planning

Hi,
We are using SmartView for accessing HyperionPlanning application. Please let me know how can we change the provider to use shared services and enable planning it for logging to file. Also which properties file is used for these configurations and where can we locate the configuration file on Hyperion planning installation system.
Please suggest.
Thanks
Edited by: user11189447 on Aug 12, 2010 8:17 AM

Hi,
Checkout the below metalink from Oracle.
Hyperion Strategic Finance Will Not Connect Via SmartView (Doc ID 1561484.1)
Below Solution as per doc ---
1. Run the installation for the HSF Web Application component on the Foundation server where weblogic is for HSF Server.
(Be sure the HSF Web Application component is also installed on the the HSF Server, if separate from the Foundation server as well.)
2. Clean up any failed deployments in the WebLogic Console by deleting the HSFWeb Server from WL Admn
3. Configure the new component on Foundation (target server).
4. On OHS server run configtool and perform the WebServer config task to configure OHS for HSFweb
5. Restart OHS and start HSFWeb
Thanks,
~KKT~

How to create a configuration file for open ldap.

hi,
I have installed open ldap on my machine. Now I want to configure it to NetWeaver.
For this, I started configuration through configtool utility of NetWeaver. While configuring, we need to select or upload configuration file. But now as it is open ldap we need to write our own config file.
I tried it by selecting dataSourceConfiguration_ads_deep_readonly_db.xml as a configuratio file. it shows successful test connection but the user which I have created is not appearing in UME store.
Does any body having solution for this?
I am trying to solve this problem from two days. I really appriciate one who will sove this problem

Well the configuration file you chose does not allow users created in NetWeaver to be created in the LDAP. That's why it's a "readonly" configuration. I would guess that you need a custom configuration file specifically for open ldap.
This should help get you started on a custom configuration file:
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/14d43f2dd44821e10000000a1550b0/frameset.htm
Then again, if the only problem with the .XML file you chose is that you can't write to the LDAP, give the dataSourceConfiguration_ads_writeable_db.xml configuration file a shot.

Where are configure files for Grid Control components?

I installed Grid Control 11g on Redhat 5.2, the repository database is Oracle 11.2.0.2 on the same box. It worked after installation, but after some weeks, I restart oms and got error [oracle@cchbi bin]$ ./emctl start oms
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting WebTier...
WebTier Successfully Started
Starting Oracle Management Server...
Oracle Management Server is not functioning because of the following reason:
Connection to the repository failed. Verify that the repository connection information provided is correct.Tried to google and search the forum, the message is not very selective and got few relevant resut.
Hope your exterts can point me to the configure file where I can verify the connetion to repository. Alos some one would share with me the knowledge on the following topics
1) What are the processes/components of Grid Control ? I am aware of oms, opmn, and a process run as /u01/app/midware/oms11g/ccr/bin/nmz -cron –silent. ANy others? What are their functions?
2) Location of configure files, log files and binary executables of this processes/components.
Many thnaks.

Hi,
to check if the OMS is running properly execute the command "emctl status oms" ($OMS_HOME/bin).
The result should be "Oracle Management Server is up".
To check which components are currently running execute the command "opmnctl status" ($OMS_HOME/opmn/bin).
The result should be something like:
Processes in Instance: EnterpriseManager0.<host
-----------------------------------------------------------+---------
ias-component | process-type | pid | status
-----------------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
HTTP_Server | HTTP_Server | 26470 | Alive
dcm-daemon | dcm-daemon | 26301 | Alive
OC4J | home | 1953 | Alive
OC4J | OC4J_EMPROV | 1954 | Alive
OC4J | OC4J_EM | 26523 | Alive
WebCache | WebCache | 27085 | Alive
WebCache | WebCacheAdmin | 27086 | Alive
Executing this command will answer your question whioch components need/should be up when using OEM/GC.
You will find some logfiles of the OMS under $OMS_HOME/sysman/log (e.g. emoms.trc, emoms.log). Please check logfile OC4J~OC4J_EM~default_island~1 under $OMS_HOME/opmn/logs as well...
To start the OMS you might try the command "opmnctl startall"...
HTH

Configuration file for pkcs11 security provider

Similar Messages

Maybe you are looking for