CONFIGURATION FILES NOT FOUND IN LANGUAGE PACK

Customer has configured a automatic system to monitor their OAM system.
They are getting ERROR in oblog like as below
"Could not read file" filename^D:\ORACLE\access/oblix/lang/da-dk/ldapconnmngrmsg.xml     
"Could not read file" filename^D:\ORACLE\access/oblix/lang/da-dk/appdbmsg.xml     
They would like to stop logging these kind of error message into their oblog.log files.
These files are not there in the da-dk language folder, so question is if copying these files from en-us language folder would resolve the situation or not.?
Also do you think in future releases of OAM will stop logging these ignorable ERROR messages getting logged into oblog.?
Any help in this regards would be much appreciated.
Regards
Prabash

Hi londonmet1,
Welcome to Adobe Forum!!
There is a planned maintenanace  announced as per Adobe Customer care.
Please go through this:http://forums.adobe.com/message/6004766#6004766
You may visiti this page too :
http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
Hope it helps you.
Regards,
Rajshree

Similar Messages

  • Configuration file not found jbo-33005

    I am stumped, I have an application created in JDeveloper and using jakarta-struts. When I try to update the database, I get the following error: JboException: JBO-29000: unexpected exception caught: ...JBO-33005: Configuration ApplicationModuleLocal not found.
    The JBO-33005 documentation says: This exception is thrown when the named Configuration is not found in the bc4j.xcfg file.
    Action: Make sure the name of the configuration is correct.
    I have doubled checked and the name is correct, the bc4j file is in the class path, etc.
    Does anyone have any suggestions on how to correct this error?
    Thank you in advance.

    Hi Keith, we're over here in my beloved OS9 forum, but actually you need to maybe post over here in 10.4.x/Tiger forums...
    http://discussions.apple.com/forum.jspa?forumID=758
    http://discussions.apple.com/post!default.jspa?forumID=758
    Not that we couldn't probably answer it here, but to avoid confusion to others, I think it'd be to your benefit!

  • ConfigurationException during deploy "CONFIGURATION FAILED! File not found"

    Hello All,
    The deployment of my adf app. is failing with the following error. Although till yesterday also, it was failing but atleast it was going much farther than this. What is causing this error? I did make changes to config.xml but then restored it. Any help is appreciated. This is critical.
    ####<Sep 14, 2011 1:23:36 PM CDT> <Info> <J2EE Deployment SPI> <brksvw379> <AdminServer> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <u00w669> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae49> <1316024616200> <BEA-260121> <Initiating deploy operation for application, myProject [archive: F:\Oracle\Middleware\user_projects\domains\BPEL_DEV\servers\AdminServer\upload\myProject.ear], to AdminServer .>
    ####<Sep 14, 2011 1:23:47 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <u00w669> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae49> <1316024627386> <BEA-149038> *<Initiating Task for myProject : [Deployer:149026]deploy application myProject on AdminServer.>*
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <J2EE> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630053> <BEA-160170> <Imported library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 for Application myProject>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <WorkManager> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630069> <BEA-002903> <Creating WorkManager from "wm/SOAWorkManager" WorkManagerMBean for application "myProject">
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module weblogic.xml.registry.XMLModule of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149060> <Module weblogic.xml.registry.XMLModule of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module empty.jar of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149060> <Module empty.jar of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module mySubProj of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <HTTP> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630771> <BEA-101363> <Application: myProject, WebApp: mySubProj has context-root specified in application.xml: "mySubProj". The context-root specified in weblogic.xml: "mySubProj" will be ignored.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024693171> <BEA-149060> <Module mySubProj of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module weblogic.xml.registry.XMLModule of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module weblogic.xml.registry.XMLModule of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module empty.jar of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module empty.jar of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module mySubProj of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module mySubProj of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:54 PM CDT> <Warning> <HTTP> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024694451> <BEA-101162> *<User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found.*
    java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:294)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:357)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:227)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: java.io.FileNotFoundException: File not found
    at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:117)
         at java.util.jar.JarFile.<init>(JarFile.java:135)
         at java.util.jar.JarFile.<init>(JarFile.java:72)
         at com.sun.faces.facelets.util.Classpath.getAlternativeJarFile(Classpath.java:262)
         at com.sun.faces.facelets.util.Classpath.search(Classpath.java:115)
         at com.sun.faces.facelets.util.Classpath.search(Classpath.java:92)
         at com.sun.faces.config.configprovider.MetaInfFacesConfigResourceProvider.loadURLs(MetaInfFacesConfigResourceProvider.java:159)     
    at com.sun.faces.config.configprovider.MetaInfFacesConfigResourceProvider.getResources(MetaInfFacesConfigResourceProvider.java:107)
         at com.sun.faces.config.ConfigManager$URLTask.call(ConfigManager.java:1096)
         at com.sun.faces.config.ConfigManager$URLTask.call(ConfigManager.java:1064)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at com.sun.faces.config.ConfigManager.getConfigDocuments(ConfigManager.java:642)
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:309)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:226)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    I did some more research and found out that method loadURLs of class MetaInfFacesConfigResourceProvider.java is throwing IOException. Is this some kind of class path issue? Please help!
    private Collection<URL> loadURLs(ServletContext context) throws IOException {
    154
    155 Set<URL> urls = new HashSet<URL>();
    156 for (Enumeration<URL> e = Util.getCurrentLoader(this).getResources(META_INF_RESOURCES); e.hasMoreElements();) {
    157 urls.add(e.nextElement());
    158 }
    159 urls.addAll(Arrays.asList(Classpath.search("META-INF/", ".faces-config.xml")));
    160 // special case for finding taglib files in WEB-INF/classes/META-INF
    161 Set paths = context.getResourcePaths(WEB_INF_CLASSES);
    162 if (paths != null) {
    163 for (Object path : paths) {
    164 String p = path.toString();
    165 if (p.endsWith(".taglib.xml")) {
    166 urls.add(context.getResource(p));
    167 }
    168 }
    169 }
    170 return urls;
    171
    172 }
    173
    Edited by: user12054715 on Sep 14, 2011 2:13 PM

    I did a couple of things ( gathered from various posts on OTN). I am not sure which one did the trick but the error is gone now. I am mentioning the steps that I took. Later when I have more time, I will narrow down to exactly what worked.
    1. The following was missing from my web.xml (Thanks Rene!) Added it
    <listener>
    <listener-class>com.sun.faces.config.ConfigureListener</listener-class>
    </listener>
    2. Removed any mention of 'Anonymous-User' from Jazn-data.xml.
    Application tab -> Secure -> Configure ADF Security -> Jazn-data.xml (source tab and removed block of code referring to anonymous user)
    Hope this will help others.

  • TestStand 4.2 Error String not found in language resource files

    I've installed TestStand 4.2 on two Windows XP machines.  On one machine it worked fine first time. On the other machine I receive the following message in the login box, and also in the templates pane:  'String not found in language resource files." I have tried uninstalling and re-installing TestStand twice but still get this error.  This error prevents me being able to login as an administrator so I am unable to use TestStand 4.2. I understand that these language resource files are provided by the installer but for some reason it seems that the machine with the error cannot locate these.
    The only difference between the two XP machines that I can find is the location of user profiles.  I note that on Vista compatible TestStand versions that TestStand user settings are stored to C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2\Components on XP machines.  On the XP machine with the error all user profiles are stored under C:\profiles, rather than C:\Documents and Settings.  This is the standard profile used by our company so I am unable to change this. The TestStand installer does recognise this and installs TestStand user settings to  C:\profliles\All Users\Documents\National Instruments\TestStand 4.2\.  Does anyone know whether the location of the user profiles is important, or whether there is another cause for this error?
    Regards,
    David
    Solved!
    Go to Solution.

    Hi Scott,
    I've held off on the changes suggested by John for now.  You are correct in that the knowledge base article referenced by John does not apply since the engine does initialise. 
    I've attached two screen shots.  The first one is the standard login box which displays the "String Not found in language resource files" message in place of the usual "administrator" user name.  If I overwrite the  "String Not found in language resource files" user name with "administrator" and click OK to log in then I get an "Invalid User Name" error dialogue box. Therefore I am unable to log into TestStand.
    The second screen shot shows the TestStand sequence editor with the String Not found in language resource files visible in the templates pane.
    Regards,
    David
    Attachments:
    TS Login Prompt.JPG ‏11 KB
    TS Seq Editor.JPG ‏75 KB

  • EM Configuration issue : file not found

    I have installed Oracle 10g db on Linux & my Enterpise Manager Url is not working
    When I give a command emctl dbconsole start ,I get the an error EM Configuration issue : file not found
    Help is appreciated.
    Savitha

    Did you ever get an answer for this? I am experiencing teh same error after running the upgrade script.

  • OS 6 Multi-language "FILE NOT FOUND"

    Someone here please see this post.
    I am trying to download the software update for the bold, the multilanguage file.
    After you enter your phone number, I am redirected to a page that says "File not Found"
    PLEASE fix this.. or let me know where I can download the multi-language os

    I have provided some information below that may help.
    To download the Blackberry 6 Multi-language software, please follow the steps below:
    Step 1 – Visit the website www.vzam.net/blackberry
    Step 2 – From the main page select the Personal Email (for consumer) or Corporate Email (if you are going to use a BES or company email)
    Step 3 – Choose the model Blackberry you will be using
    Step 4 – Follow the steps on the page and select the options
    -Choose upgrade if it is going to be a web-based upgrade, or continue with the instructions below if it is going to be through desktop manager.
    -Select Multilanguage
    -Enter your 10 digit mobile number
    -Select download at the bottom of the page
    I hope this helps.

  • Configure incoming e-mail settings - Error File Not Found?

    Hello
    I am trying to setup a test server for SharePoint 2010 and I have followed the MS instructions for deploying a single SharePoint 2010 server with SQL server. I have had no problems or errors during the setup; however now going through the recomended
    post installation task of configuring incoming email settings I am getting an error message.
    I have added the SMTP service to the server, configured it in IIS then gone back to the SharePoint central administration page. When I click Configure incoming e-mail settings under System Settings I get the following error message.
    Error File Not Found. Correlation ID: cc08f335-6762-4c70-a690-ecfd012ec3c2
    I have no idea what is causing this so have no way to resolve it, any help would be really appreciated.
    Thanks

    Hi Terradog,
    Firstly, you can check the ULS log, which is located in Drive:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\LOGS folder. You can find the exact
    correlection ID from the log file.
    For the similar issue, you can refer to the following post:
    http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/b24e2a4e-c422-49de-8f35-478c8df84329#470d6dd5-722f-4226-bf2f-07e261c47618
    For more information about configuring incoming e-mail in SharePoint 2010, you can refer to the following article:
    http://sharepointgeorge.com/2010/configuring-incoming-email-sharepoint-2010/
    Hope this helps.
    Rock Wang
    Regards, Rock Wang Microsoft Online Community Support

  • FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1

    FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
    Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
    Full Installers (Agent, Repository, OMS, and Management Packs)
    Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
    when this is extracted it leaves me with Disk1, 2, and 3
    install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
    i even triwd the same download from edelivery.oracle.com and gives the same madness
    am stuck.

    i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
    the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
    where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
    error reads :
    -error cheching the existence of the SYSMAN user in Management repository
    -exception occured while connecting to database . please check the connection details you specified and retry
    -io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
    REP DB HOSTNAME:SA-OMS-01
    PORT:1521
    SERVICE/SID:OMSDB01
    SYSMAN PASSWORD:PASS
    THE REST I PUT PASS AS PASSWORD
    NOT SURE WHAT TO DO NEXT.

  • File not found during installation (WinXP)

    Well, I downloaded Oracle 11g for Windows (32 bit) from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html, and, basically, after having had some trouble configuring a new database, I selected the option to (simply) install a database through the wizard. I breezed through the settings, and, ran the installation wizard, however, some files seem not to be available within \win32_11gR2_database_1of2\database, or perhaps my laptop (Amilo Pro 8210) is too slow to be able to read these files.
    The errors show up during Setting up Oracle Database 11g 11.2.0.10. The errors showing up within the UI are as follows:
    File not found F:\app\Jon\product\11.2.0\dbhome_1\bin\db2gc
    File not found F:\app\Jon\product\11.2.0\dbhome_1\oc4j\OC4J_DBConsole\config\system-application.xml
    File not found F:\app\Jon\product\11.2.0\db_home_1\oc4j\j2ee\OC4j_DBConsole\config\system-jazn-data.xml
    NOTE: It is quite painful that there is no functionality to enable me to upload attachments (e.g. screenshots and log files) because it is very time consuming to copy everything manually, and, it is human nature to get bored typing after a while, so please, Oracle, pimp this profile :~) I did not take exhaustive screenshots, the error log files shows quite a few exceptions as well:
    oraInstall2012-06-17_08-09-30PM.err
    java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup12.jar (The system cannot find the path specified)
         java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup12.jar (The system cannot find the path specified)
         java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup5.jar (The system cannot find the path specified)
         java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup5.jar (The system cannot find the path specified)
         java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup19.jar (The system cannot find the path specified)
         java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup19.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup1.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup1.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup20.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup20.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup15.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup15.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup8.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup8.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup11.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup11.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup4.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup4.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup18.jar (The system cannot find the path specified)
    java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup18.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup14.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup14.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup7.jar (The system cannot find the path specified)
    java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup7.jar (The system cannot find the path specified)
    java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup3.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup3.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup10.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup10.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup17.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup17.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup13.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup13.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup6.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup6.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup2.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup2.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup16.jar (The system cannot find the path specified)
         C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup16.jar (The system cannot find the path specified)
    java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup9.jar (The system cannot find the path specified)
    java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup9.jar (The system cannot find the path specified)
    java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.sysman.console.db\11.2.0.1.0\1\DataFiles\filegroup3.jar (The system cannot find the path specified)
    NOTE: Due to the message limit of 30000 characters I could not post the log file, nor upload it because no such options is available within
    Database Installation I had to chop off parts of the error file as well, patiently highlighting the filenames of the jar files.
    oraInstall2012-06-17_08-09-30PM.out
    You can find the log of this install session at:
    C:\Program Files\Oracle\Inventory\logs\installActions2012-06-17_08-09-30PM.log
    Dll to load is C:\DOCUME~1\Jon\LOCALS~1\Temp\OraInstall2012-06-17_08-09-30PM\Win32RunProcesses.dll
    Loading psapi.dll from C:\DOCUME~1\Jon\LOCALS~1\Temp\OraInstall2012-06-17_08-09-30PM\psapi.dll
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.

    >
    Your imagination is not limited, my friend. I have already told you that I have unzipped the folders, and, it is not the scope of this forum to have myself insulted in this manner.
    Seriously, one expects forum members to be respectful rather than talk garbage about manuals, I was only asking for help, because I thought that files were missing from the installation pack.
    I might be your next client for all you know.
    >
    No offence was intended - it was merely a tongue-in-cheek observation. If you read my previous two replies in this thread, they are courteous to a fault - as are all my posts.
    The forums are a volunteer organization - people take time out from their personal and professional lives to help others. Some folks, thankfully a very small minority, use the forums as a free personal support/helpdesk tool to read all the documentation on their behalf and look up or solve things on their behalf. The forums work best when there is real dialogue and exchange of information, rather than monosyllabic answers and mudslinging.
    Good luck with your install
    HTH
    Srini

  • Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory.

    HI
    i restored a sharepoint web 80 application in our test domain
    and after when i browse the new web application 
    it says 
    Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory. 
    adil

    Hi  adil,
    According to your description, my understanding is that you encountered the error “Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file
    exists under the layouts directory.” .
    The issue happens in
    We have customized master page
    In the master page, we use path the script/style file like this: <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/coe/mainCOE.css%>"
    runat="server"/>
    While using the dynamic path in a multiple languages enabled site, language Id(1033 etc) will be added to the path automatically. That cause the file to be not found.
    To solve the issue, please download  the Arabic language pack http://www.microsoft.com/en-us/download/details.aspx?id=3411 ,
    install it on  your SharePoint and refresh your browser.
    Reference:
    http://sharepoint-community.net/profiles/blogs/cannot-make-a-cache-safe-url-for-1036-sytles-themable-corev4-css
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Preverify doesn't work. Always return error 2 "File not found"

    Hello,
    I have this configuration:
    - Latest JDK and JRE
    - Ubuntu Linux 7.10 64 bits
    - NetBeans 6RC2 Mobility Pack
    When I try to build a project, NetBeans returns:
    Preverifying 6 file(s) into /home/alfredbaudisch/NetBeansProjects/GameBuilderDemo2/build/preverified directory. 
    java.io.IOException: Cannot run program "/home/alfredbaudisch/Desenvolvimento/Utils/WTK2.5.2/bin/preverify": java.io.IOException: error=2, File not found
    Then I downloaded WTK 2.5.2 by myself and tried to build it using the toolbar:
    Creating project "GameBuilderDemo2" 
    Place Java source files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/src" 
    Place application resource files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/res" 
    Place application library files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/lib" 
    Settings updated 
    Project settings saved 
    Building "GameBuilderDemo2" 
    java.io.IOException: Cannot run program "/home/alfredbaudisch/Desenvolvimento/Utils/WTK2.5.2/bin/preverify": java.io.IOException: error=2, File not found 
    Build failed  Any suggestion?
    Thanks.
    Edited by: AlfredBaudisch on Nov 25, 2007 1:36 PM

    The problem was that WTK was not accepting JRE 64-bits, then I installed JRE 32-bits and set up WTK to look for it.
    I wrote an article about the platform Ubuntu + NetBeans 6:
    http://mobiledeveloper.auriummobile.com/index.php/2007/11/25/perfect-java-development-platform-with-ubuntu-710-and-netbeans-6/
    Edited by: AlfredBaudisch on Nov 25, 2007 6:47 PM

  • JBO:33001 bc4j.xcfg file not found in class path

    Hi,
    I am yet another victim of the age-old error JBO:33001 bc4j.xcfg file not found in class path, When i have my BC4JApp.jar in Tomcat Web-inf/lib directory. All the other jar files and class files in my webserver-application web-inf classes and lib directory works.
    But Tomcat server is not able to read this bc4j.xcfg file. I can see in my jar file that this bc4j.xcfg exists and in the specified package directory. still the problem persists. My BC4JApp.jar is perfectly working when i use JDeveloper. but not when i use tomcat4.0 and call a JSP using BC4JApp.jar from browser (My environment is Jdeveloper3.2, Tomcat4.0+IIS in middle tier and oracle 8i as DB, everything on windows2k)
    I have gone through almost all the threads possible that relates to this error in this form. None of them have a answer except to say "put the file in classpath". and last reply is "will fix in jDeveloper 9i. So what happens to us who are working in Jdeveloper 3.2?
    1. I have this file in my jar file.
    2. I also tried creating a seperate directory manually, with the same name as my package under web-inf/classes, web-inf/lib , just under web-inf directory and atlast under approot directory also. I tried having my package directory containing bc4j.xcfg in these folders one at a time and also tried having this directory in all these folders at the same time.
    Still no solution.
    Itz frustrating that neither proper documentation nor a right url page nor i am aware of available addressing this. page links given in above threads only gives me the wonderful page of ie's "Page cannot be displayed".
    Is there a answer to this error and my problem. If this doesn't work, then i have to all the way develop from scratch creating my jsp using JDBC calls and Stored packages etc.
    I don't want to give up on this Jdeveloper at this final moment because if this bc4j.xcfg file is found, my application will work perfectly. on these final moments, if this doesn't work, i am frightened to imagine to develop my application in standard way. Atlast, if thatz the option left,we have to do that bcos our production date is close by.
    Please can some one in this forum or Jdeveloper help me to solve this problem. I am desperate and very urgent.
    Waiting for a reply from Jdev team very much...
    ( I just posted in the other thread which is pretty old, dated backto May 2001, which was relevant to this error. Just to make sure it is noticed, I am posting it seperately too)
    Thanks
    Hari(2/3/02)

    Hi All,
    For those who are following this thread, I got a solution for this error with the help of Jdev Team.
    This solution may work, if you have deployed your application in Tomcat4.0.1. This is the environment in which I work and tested.
    As you may be aware, Tomcat ignores value in CLASSPATH variable.
    To see any files that are existing or newly deployed, it has it own way of detecting it.
    Addition information on Tomcat working, you can follow this link,
    http://jakarta.apache.org/tomcat/tomcat-4.0-doc/index.html
    Coming to point, Tomcat has got five classloaders and each classloader invoked, looks in their related directories for files in following order.
    1. /WEB-INF/classes of your web-application
    2. /WEB-INF/lib/*.jar of your web application
    3. BootStrap classes of your JVM (Tomcat's $JAVA_HOME/jre/lib/ext)
    4. System class loader classes($CATALINA_HOME/bin/bootstrap.jar,CATALINA_HOME/lib/tools.jar)
    5. $CATALINA_HOME/common/classes
    6. $CATALINA_HOME/common/lib/*.jar
    7. $CATALINA_HOME//classes
    8. $CATALINA_HOME/lib/*.jar
    So All your individual application related files should be deployed in your application's WEB-INF/classes or WEB-INF/lib directory accordingly.
    If your application files are unpacked, they should be deployed or copied under WEB-INF/classes directory
    if the files are within a jar, they should be under WEB-INF/lib directory.
    If your Jar-files contains bc4j components, then those jar files should be deployed under WEB-INF/lib directory. Also,do the next step to copy all relavant BC4J runtime libraries under lib directory.
    IMPORTANT: Please remember to copy and paste all the required BC4j runtime libraries in the Same WEB-INF/lib directory along with your application jar files. This is the real reason which can solve this JBO:33001 to disappear. It worked for me.
    To configure your directory for tag-lib uri's, use web.xml to set the taglib-uri attribute.
    Put your web.xml and DataTags.tld in the WEB-INF directory.
    Your simple web.xml may look like as follows.
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
         <taglib>
              <taglib-uri>
                   /webapp/DataTags.tld
              </taglib-uri>
              <taglib-location>
                   /WEB-INF/DataTags.tld
              </taglib-location>
         </taglib>
    </web-app>
    You may then modify this web.xml to suit further requirements of your application.
    Remember to stop and restart the Tomcat Server (service) by using shutdown and startup scripts after updating any jar files/class files/ JSP or source files deployed in Tomcat.
    Sometimes, only this helps even though your context's reloadable attribute is set to true in Tomcat Server's server.xml file.
    Hope this above information helps you to solve this error in Tomcat environment. My Sincere thanks once again to Juan and Jdev team for their help and efforts to solve this problem.
    Thanks
    Hari

  • Error on WWI server EHS_GLM_GENSERV: Results file not found on production

    Hi Experts,
    I need some help/advice. We have issues with our new EH&S WWI server. 
    This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
    Only difference between  existing WWI QA and production server is that
    Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI 
    And Same path maintain on new server C:\Program Files (x86)\EHS\WWI  
    But existing production WWI server installation path  is  different C:\Program Files\EHS\WWI
    So is there any customizing changes required from SAP side to avoid this error on production
    Can you please advise on this.
    ================================================================================
    Error on WWI server EHS_GLM_GENSERV: Results file not found
    Message no. C$830
    Diagnosis
    The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
    System Response
    Generation was not carried out.
    Procedure
    Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
    Check the Windows event log on the WWI generation server. The event log may contain other error messages.
    SAP Note 1058521 provides possible solutions for this error.
    ==================================================================================
    Log shows
    ============================================================================================================================================
    E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
    E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
    ================================================================================================================================================

    Hello Gajanan,
    the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
    For ECC 6.0 Ehp 0-2 and lower
    Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
    For ECC 6.0 Ehp 3-6
    Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
    For ECC 6.0 Ehp 7
    Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data

  • "XML File not found for the Container DataBindings.cpx" error after deploy

    Hello,
    I have a problem with my JSP-Javaproject. Local works all fine but when i deploy my project to a Oracle Aplication Server i allway get this XML-File-Not-found exception:
    oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container DataBindings.cpx
    In my EAR-File the DataBindings.cpx is at:
    \WEB-INF\classes\
    My JSP-File:
    <jbo:ApplicationModule id="AippackageModule" definition="DataBindings.DataModule" releasemode="Stateful" />
    My web.xml:
    <context-param>
    <param-name>CpxFileName</param-name>
    <param-value>DataBindings</param-value>
    </context-param>
    My DataBindings.cpx:
    <?xml version='1.0' encoding='windows-1252' ?>
    <Application xmlns="http://xmlns.oracle.com/adfm/application" id="DataBindings"
    Package="" ClientType="Generic">
    <pageMap>
    </pageMap>
    <pageDefinitionUsages>
    <page id="eonerrorPageDef"
    path="de.avacon.ahb.system.tools.pageDefs.eonerrorPageDef"/>
    </pageDefinitionUsages>
    <dataControlUsages>
    <BC4JDataControl Configuration="AppModuleLocal"
    Package="model.data"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"
    id="DataModule">
    <Parameters/>
    </BC4JDataControl>
    </dataControlUsages>
    </Application>
    What can i do?
    Thanks, steve

    Adding the dependency in the ViewController fixed this for me.
    I'm using two AppModules in the controller and the second one wasn't being picked up.
    I was able to fix this by:
    Go to the Project Properties, select Dependencies, edit the Dependent Projects and Archives, find the model that's failing and add a tick in the Build Output box.
    The model should now be picked up in the ViewController's DataBindings.cpx source file, though I did have to restart JDev for this to be picked up.
    HTH
    Phil

  • File not found error in SFTP channel

    Hi All,
    We are getting a "file not found error " while using a SFTP sender channel .
    Our Scenario :
    We are using SFTP as the source adapter .Presently we are using  two nodes for load balancing for all the sender channels.
    One of the node's of the  SFTP channel is picking the file , while the other node at the same time is throwing a "File not found error".
    The file is being picked and is placed at the target, but the channels are in error state as one of the nodes is in error state.
    Please let me know, if we did any mistake while configuring the adapter.
    Thanks,
    Yamunan

    Hi,
    Could you please check if you have provided right path in your sender communication channel...to pick the file from...
    Regards,
    Naveen.

Maybe you are looking for

  • Can not get my Sungale Tablet to connect to wifi.

    Can not get my Sungale Tablet to connect to wifi.

  • File archive part missing

    I am trying to install RoboHelp 11 on my work laptop, and I keep getting the following error message: "The file archive part of Adobe RoboHelp 11 is missing. You need all the parts in the same folder in order to extract Adobe RoboHelp 11. Please down

  • Buffalo Linkstation & OS 10.4 inconsistencies?

    Hello: Our Buffalo 160GB Linkstation has 3 folders: info, share, & share-mac. Some files placed into the "share" folder are arbitrarily renamed, some cannot be trashed (for no apparent reason), & some folders appear that were never created or pasted

  • Highlights and Shadows develop settings are not functions

    While implementing an image-processing plugin, I learned something very interesting (to me) about the Shadows and Highlights develop settings.  The other basic tone settings (exposure, contrast, saturation, etc.) always map any one color to another s

  • WRT54GS V6 Constantly Losing Connection

    I have recently purchased a Linksys WRT54GS V6 router. I initially had it running fine with only 2 computers, 1 wired the other wireless. I have now moved into a house shared with 5 other college students which brings the total to 7 wireless computer