Configuration for 0CO_PC_10 (new EHP4 content extractor for Product Costing

Has anyone tried to use new Prod Costing extractor 0CO_PC_10 that comes with ECC EHP4 upgrade?
THere seems to be some configuration or activation to be done in ECC via Transaction SFW5 .
SFW5 seems to be for activating business function sets, which seems to be a new ECC activity with EHP4 content.
When trying to use extractor 0CO_PC_10 in RSA3, we get an error "Errors occured during the extraction"
which implies something is not yet configured or activated ECC to support this extractor.
Likely a COPA configuration activity?
Appreciate any hints from anyone who has used extractor 0CO_PC_10 already?
warm regards, David

Hi,
Check the followig SAP Notes:
Note 1331090 - Extraction: "Errors occured during the Extraction"
Note 1439029 - SNP Extraction: "Errors occured during the Extraction"
Note 1386279 - More precise error message when reading data (2)
Note 1409789 - More precise error message when reading data (3)
Note 720486 - Extraction:Error in the generated program by the BW Adapter
Thanks
Reddy

Similar Messages

What is the Business Content Extractor for HRP1000-OBJID ?????

Hi all,
    I want to extract the HRP1000-OBJID, HRP1000-SHORT, HRP1000-STEXT from
R/3 in to BW. The table name is HRP1000 (Info Type 1000 DB Table).
    What is the Business Content Extractor for these fields, please ?
    Thanks in advance.
Best regards.

There are a lot of datasource based on that table; chack this link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e2/72ee3da7138e5be10000000a114084/frameset.htm
Hope it helps.
Regards

BI Content extractor for EORD

Hi:
Please let me know if we have a BI Content extractor for EORD ( Purchasing Source List ) .
Thanks.

I would like to have the vendor field from this table.
The extractor 2LIS_03_BF already has been implemented and it contains a vendore field as well.
I am really not sure if this field is good enough as when I contacted one of the MM consultants he has asked me to pick up the same from EORD.
I will have to either find out if there are any standard extractors on this table or I will be left with enhancing the BF extractor. Enhancing will again force me to do a re-init of the entire data if I want to have the historical data for the added field.
Awaiting for some suggestions on this!
Thanks

Unable to find, Business Content Extractors for PS Module in RSA5

Hi All,
I'm unable to find the standard Business Content Extractors for PS module in RSA5.
Like : 0CO_OM_WBS_1, 0CO_OM_WBS_2, 0CO_OM_WBS_6, 0CO_OM_WBS_8.
Is anything to be installed?
Sorry.. these datasources are present in different module ' Overhead Projects '.
Apologies.
Thank you,
Ketan Zare
Edited by: ketan zare on Jan 6, 2011 9:37 AM

Hi Ketan,
Check these DatasSource. Might be of some use.
0CO_OM_NAE_1                      Network Activity Element: Costs
0CO_OM_NAE_2                      Delta extraction: Activity Elements Actual costs
0CO_OM_NAE_3                      Network Activity Element: Commitmt Line Items
0CO_OM_NTW_1                      Network plan: Costs
0CO_OM_NTW_2                      Delta Extraction: Networks Actual Costs
0CO_OM_NTW_3                      Network Header: Commitmt Line Items
0CO_OM_NWA_1                      Network Activity: Costs
0CO_OM_NWA_2                      Delta extraction: Netw. Activity Actual Costs
0CO_OM_NWA_3                      Network Activity: Commitmt Line Items
0CO_OM_WBS_1                      WBS elements: Costs
0CO_OM_WBS_2                      WBS elements: Budget
0CO_OM_WBS_3                      WBS elements: Overall plan
0CO_OM_WBS_4                      WBS elements: Statistical key figures
0CO_OM_WBS_5                      WBS Elements: Selections
0CO_OM_WBS_6                      WBS Elements: Actual Costs Using Delta Extraction
0CO_OM_WBS_7                      WBS Elements: Commitment Line Items
0CO_OM_WBS_8                      WBS Elements: Budget Line Items
Roy

Creating a new WPC Content Layout for a Link List

Hello all,
As I've been lurking about the innards of Web Page Composer, I noticed that the Link List contains two different XSLTs for it representing different "Content Layouts".
Has anyone added a new Content Layout for an item? If so would they happen to have some high level steps on accomplishing it? It doesn't appear to be as difficult as some of the other custom configurations in adding new content types and new forms. So far I suspect the steps are:
Create the new XSLT and upload to KM.
Go to System Admin/System Configuration/KM/CM/Editor/Stylesheets/Stylesheets and hook up the XSLT to the engine
Go to System Admin/System Configuration/KM/CM/Editor/Stylesheets/Stylesheet Groups/Document Styles Groups and add the stylesheet to the lists group.
Bounce the Portal
That seems to be it, but it would shock me if it was all that was required.
Any thoughts?

So I answered my own question.
It is as simple as I listed above. To create a new list rendering:
Simply create the new XSLT and stick it under /etc/wpceditor/styles
Then create the StyleSheet reference under: System Admin/System Configuration/KM/CM/Editor/Stylesheets/Stylesheets.
Then add the StyleSheet reference to the "lists" group.
Bounce the portal.
You'll have a new option when you select the style.

Business Content Extractor for SAP Controlling ?

Hi all,
I would like to know if there is an existing Business Content Extractor's for SAP BW for CONTROLLING - INTERNAL ORDERS.
What I need to be available from SAP R/3 can be accessible via :-
SAP R/3 -> Accounting -> Controlling -> Internal Orders -> Information Systems -> Reports for Internal Orders -> Line Item -> "KOB4 : Orders: Budget Line Items "
Thanking very much for your guide

Hi,
Check this site:
http://help.sap.com/saphelp_nw04s/helpdata/en/10/abab39fda7b86ee10000000a114084/frameset.htm
With rgds,
Anil Kumar Sharma .P

BI Content extractor for table LFB1?

HI folks,
I'd happy to know if there is any BI content extractor which is able to extract the LFB1 table contents to BW.
I know there is 0VENDOR_ATTR but it only seems to deal with the "standard" vendor data (like is in table LFA1).
In fact, we are especially looking for the field ALTKN which is stored in the LFB1 table.
Best regards,
bivision

Hi,
If the field is not there in that datasource try to enhance to the datasource.

BI-Content Extractor for PS Partner roles?

Hi all
we are in need to extract PS Partner-roles.
As we could see, data is stored in IHPA and is referenced by the obj-id out of 0PROJECT_ATTR.
So now the question: is there any BI-content-extractor available for extracting IHPA? Unfortunately, we couldn't find anyone so far.
Thansk & regards
bivision

hi
unfortunately, this is not bringing up the partner information.
As IHPA effectively is a PM table - is there any extractor out of this area for extracting data from this table?
best regards
bivision

Business content extractors for FI-TR

Hello all,
I´ve got a requirement to extract data for FI-TR and the specific area is called "Liquidity Planner".
Someone told me that there is an especific standard extractor for this, but I can´t find it in business content.
Could anybody tell me where I could find it?
Thanks in advance.
Carmen

I can find anything extracting from this table; to find standard datasource go to http://help.sap.com/ and serch with the namo of the table; than, on the right side there are the object finded; choose datasource and look if are right for your use.
Hope it help.
Regards

New adobe content viewer for iPad don't work with v23

Hi
I try to use v23 for my publication, and when i try to see in ipad… show me a pop-up said me I don't have a correct version of content viewer for v23 i ipad
I re-install adobe content viewer to new version and still don't work
Any idea?

Apple has not validate yet the V23 version of the Adobe Content Viewer.
See here for more information http://caniupdateadobedps.com/

Time for a new battery (or more) for iBook G4?

I have a 3 1/2 year old 14" ibook G4 - I have the original battery (possible clue?) and before it became completely unresponsive to powering up, it would suddenly turn off, even with the power adapter plugged in. I've tried all the things Apple recommends - removing and reinserting the battery,resetting the PMU using the SCOP keystrokes, removing the battery while plugging in the adapter, and removing the adapter and trying to start on battery power only, and all permutations of the above. Nada. No chime, start up screen, or whirring fan...Silence.
When the adapter is plugged into the iBook, the color is orange, even after ~ 15 hours of charging.
Is it time for a new battery, adapter, DC in board?

Well, the story is a little different now. At first, when I got a new battery - from OWC, when I used the ac adapter, the computer would start up, but even after 12 hours of charging, the battery indicator was at 0% charged, and after 2 or 3 cycles of turning the machine on and off, it eventually wouldn't turn on at all, even with the ac adapter plugged in. so I bought a new ac adapter, and it will turn on , but the battery indicator still says 0% charged. Just to verify if the battery was indeed not charged, I unplugged the ac adapter and the computer would not turn on at all.
So for now, I have a laptop with a new battery and a new ac adapter that will only work if the ac adapter is plugged in, and the battery appears to not be able to charge.
Question:
Is it time for a new Dc-in board, just leave well enough alone and run off the adapter, get a new computer or????

Will the newest version of itunes that I need for a newer ipod still work for an old ipod?

I have an Ipod that is 4 years old and have an old version of Itunes that I use with it. My son wants to start using his Ipod that he just got last Christmas on this computer and Itunes wants me to download a new version of Itunes for it. I'm wondering if I download the newer version of Itunes, will it still work with my older Ipod. They are both Ipod Shuffles. Thanks.

Yes.
(58559)

Hoping for a new version of software for s60v5 pho...

Sir,
We are hoping for a new version of s60v5 devices. It seems now nokia only concentrates on Lumia & Belle devices.
And what about s60v5 devices. We are still running on V 51.1.002. Its now an old version & we are using it from last 1.5 years. It seems nokia had forgot that they also had manufactured s60v5 devices a year ago.
We need that please provide a new software version.

adrianhughes wrote:
Not gonna happen mate. Most Nokia devices received a year to year and a half, and some devices, three years, worth of support and firmware updates. The focus now is on Asha and Lumia devices, and not older devices such as S60 5th Edition and Nokia Belle. Symbian is now in maintenance mode, so it is extremely unlikely that any more updates will be seen for these devices.
If you are taking about S60 v5.0, I tend to agree. However, I wouldn't be suprised if there were some updates for the C5-03 and derivatives (C5-04/05/06) still coming. Nothing major for sure, but perhaps some bug fixes. As for Belle devices; probably there will be some updates for the 808 PV and possibly also for the 603, 700 and 701.
As for Nokia not having any people working for Symbian: that has been technically true for a year now, since Symbian development was outsourced to Accenture along with the staff. As far as I know there are still some people working on Symbian at Accenture, although they concentrate mostly on bug fixes and the like at this point.
Mobile phones: 3310, 3510i¹
Smartphones: N70¹, N82, E50¹, 6220 Classic¹, 6710s Navigator¹, X6-00, N97 mini¹, 700¹, Asha 311¹, Lumia 710¹, Asha 503¹
In the family: C2-01¹, Asha 303¹, 301¹
¹ Still in working condition

Automation for actual input of utility rate in Production Cost centers

Dear All,
Currently we have a process where we are downloading actual rates through KSII for each location and rates calculated are inputed through KBK6 for all individual production cost centers by activities ,so my requirement is whether there is any procedure where downloading and uploading can be eliminated and actual rates calculated by system directly loads on to the production cost centers.
Kindly provide any suggestions
Thanks and Regards
vijay

Hi,
If u run KSII, system will give a message "Do you want to post the results of price calculation?" if u click on YES , it will automatically update in your KBK6. Pl. Check once.
Regards,
Rajeswari

Business Content Extractors for Inbound Deliveries (again!!!)

Dear all,
although we had the same question already in january, but as there was no solution at all, I have to ask the question how I'm able to extract <b>in</b>bound deliveries to BW. They are stored in LIKP/LIPS, but somehow the standard extractor 2LIS_12_* filter the corresponding document types.
Thanks for your help,
Andreas

Hi Andreas,
Have you tried by using R/3 LIS Structures (those named SXXX). You can try checking if you have anyone that is useful or you can create a new one and see in R/3 if it gets the information you need. Maybe you'll need help of an SD consultant. The transaction used to create those structures is MC21.
Then you will need to create the datasource by using transaction LBW0.
Hope this helps.
Regards,
Diego Lombardini

Configuration for 0CO_PC_10 (new EHP4 content extractor for Product Costing

Similar Messages

Maybe you are looking for