Configuration for 50% CVD/ADC in First year and 50% in Next Year

Dear Experts,
Please confirm me SPRO Setting where we maintain 50% CVD/ADC in First year and 50% in Next Year.
Thanks in Advance.
Ishu

Hii,
ADC will not be deferred to the next year.
Use IP Sub transaction type for on Hold account of CVD.
Regards,
Kumar

Similar Messages

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

How transfor the year ending balances to next year

hi,
Now i am learn in SAP FICO.
i want how transfor the year ending balance to next year
i am waiting for answar
thanks

Hi,
Up to 4.7 use T.code for Transfer GL Balances F.16,
ECC use T.Code: FAGLGVTR
Customer & Vendor Balances: F.07
Asset A/C:
Close Fiscal Year: AJAB
Open New Year: AJRW
Regards,
Viswa

I cannot go into iCloud because it always ask me for the password of my first identifiant and I do not have it and I am stock right there although I have registered with another identifiant and password it always bring me back to the first identifiant

I cannot get into iCloud because although I have registered a new ID
it always bring me back to the first identifiant
and I do not remember the password
so I am stock right there
even if I have a new identifiant
it ask me the password of the first identifiant
it is insane
thanks
Lucien
<Emails Edited by Host>

It's a bad iddea to post your email addresses - it's an invitation to spam - and I've asked the Hosts to remove them.
Go to http://appleid.apple.com , click on 'Reset Password', sign in with your 'gitanie' ID and proceed from there.

IPod Touch 5th Generation Australia Release Date? Last week I went to the Carindale Apple store located in Queensland and they had said they wont be getting it for a few months but they'll get it before next year. Anyone know the exact date ?

So the question says it all. Last week, I went to the Carindale Apple Store located in Queensland to purchase a iPad 2 and a iPod Touch 5th Generation. I asked one of the shop assistants when they were getting the iPod Touch 5th Generations and they had said that they didnt know that they would recieve it in a few months but they'll recieve it before next year. Anyone know the OFFICIAL RELEASE DATE of it in Australia ? I want to order it online but my mum doesnt have a credit card, lol .

No, Apple has not set a date.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

$AUD29.99 last year and $49.99 this year. Quite a jump, what's the story?

I'm a small user.
I guess that was a honeymoon rate last year?

>honeymoon rate last year
When you joined the Cloud there SHOULD have been notice of an introductory price... and that it would go up after a year
Cloud Plans https://www.adobe.com/products/creativecloud/buying-guide.html
-and subscription terms http://www.adobe.com/misc/subscription_terms.html

What is the optimum core configuration for a new Mac Pro to process and manipulate very large (80 megapixel) images using PhotoShop and Camera Raw?

Hello:
I will be using creative techniques to process and manipulate a large number (hundreds) of very large (80 megapixel) images captured using a medium format digital back (Phase One IQ180).
Final output will be digital fine art imagery printed using an Epson 11880 at large sizes (up to 60 inches x ?), retaining the highest possible quality and resolution. I will be using Adobe CC PhotoShop and Camera RAW as well as Capture One software. PhotoShop filters will be used extensively.
The Mac Pro needs to be optimized for the above purpose and be useful for at least five years. I plan to max out all the other options (RAM, graphics cards, storage). Performance is more important than cost.
The few discussions I have found that mention optimum core configurations seem to lean toward 6 or 8 (but likely are not taking into consideration my need for manipulating a large number of very large files), so I am looking to this foum for opinions.
Thank you,
Kent

See if this helps
http://macperformanceguide.com/index_topics.html#MacPro2013

HT201371 More Apple id's with the same Touch ID possible? I have two Apple ID's, one for buying apps since the first iPhone and later, one for iCloud. Now with my new iPhone 5s, after installation Touch ID is connected to the iCloud one.

I have 2 Apple ID"s, one for buying app's (since the first iPhone) in the store and another one for operating with iCloud things. Now, after installation/activation of my new iPhone 5s, the Touch ID is connected to the iCloud world. Conclusion, if I like to buy a new app. I still have to fill in the password for the other Apple ID. In the past I asked Apple to may join both, but that seems to be impossible.
Anyone a solution?

I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

Shortly after loading,the latest version,downloaded and installed here 5/22/13, reports an error with ntdll.dll forcing a shutdown. Apple's temporary work around works for me; launch Itunes while first pressing and holding CtrlShift keys ...

This startsitunes in it's own "safe mode", allowing normal functions.

By running in safe mode the plug-ins are not running. The issue may be caused by a plug-in.
http://support.apple.com/kb/TS3430 gives instructions on how to manage/troubleshoot 3rd part plug-ins.
Try the knowledge base and let us know.

BI Content Variable on 0Calday for first day of the fiscal year and first day of the current month

Hi Friends,
In one of my BEx queries, I need to restrict a key figure for 0Calday based on the first day of the current fiscal year. And another key figure for the first day of the current month. Instead of using Customer exit, I hope there is some SAP delivered standard variable for these filters.
Please let me know if there is anything available for this. Your answers will be highly appreciated.
Thanks & Regards,
Ranjan

Hi Ranjan,
Please find below standard variables.
Pls check below link for more.
Standard Variables in BEX related to Time Charcteristics
Characteristic
Variable
Description
0CALDAY
0CWD
Current Workday (SAP Exit)
0CALDAY
0CYTCD
Cumulated to Current Day (SAP Exit)
0CALDAY
0DAT
Current Calendar Day (SAP Exit)
0CALDAY
0DAY_***
Cumulation of all Values to Key Date (SAP-Exit)
0CALDAY
0LYTCLD
Cumulated to Current Day of Previous Year
0CALDAY
0LYTCLD
Previous Year Cumulated to Current Day (SAP Exit)
0CALDAY
0L_DATE
Last Calendar Date
0CALDAY
0P_LY_R
Comparative Period for Last Year
0CALDAY
0P_TY_R
Period for Current Year up to Yesterday
0CALDAY
0S_KDATE
Key Date Interval for Previous Year (SAP Exit)
0CALDAY
0S_KDAY
Key Date Interval Current Year (SAP Exit)
Best,
SATYA.

SQL select Statement -first day and last day of the month - 1 year from now

Hi,
I need to write a SQL to get the dates in between first day and last day of the month one year from now.
SELECT last_day(add_months(sysdate,12)) as lastday from dual
What could be the Query to get the first day of the month one year from now..
ie ..Sysdate - 3-DEC-2009
Result - 1-DEC-2010
thank you

Hi,
You can use TRUNC with 2 arguments to get the first DATE in a month, year, quarter, week, hour, minute, ISO year, ...
SELECT TRUNC ( ADD_MONTHS ( SYSDATE
                           , 12
              , 'MONTH'
              )     AS first_of_month
FROM    dual
;The DATE returned will be in the same month, year, quearter, ... as the first argument.
\We convered the last day of the month in [your previous question|http://forums.oracle.com/forums/message.jspa?messageID=3942939#3942939].
At that time, I warded about using LAST_DAY as a cutoff point; TRUNC is a much better way.
For example, to find all appointment_dates in the current month next year:
SELECT *
FROM    appointments
WHERE   appointment_date >= TRUNC (ADD_MONTHS (SYSDATE, 12), 'MONTH')
AND     appointment_date < TRUNC (ADD_MONTHS (SYSDATE, 13), 'MONTH')Note that
the first part of the WHERE clause calls for dates on or equal to the beginning of the 12th month in the future, but
the second part of the WHERE clause calls for dates before, not equal to , the beginning of the 13th month in the future.

Whats the Best Configuration for Professional Photographers ???

Hello Everybody,
Can Please somebody tell Me Whats the Right Configuration for a Photographer I am Into Photography and Have to edit files (Photos ) upto 35 - 60 Mb size In Photoshop CS4 or Phase One Software which itself takes about 1GB of RAM I think Is The New 20" iMac 2.66Ghz with 2Gb RAM enough or do I need a 4GB RAM ??? This is the first time I will be going for a Apple Product so have no Idea about the System Please let Me know as Soon as Possible
Thankyou

I think any of the current models would be up to the task. But since you are a pro photographer, you might consider NOT getting the base line 20" model and instead upgrading to the 24" model. Not only do you get a bigger screen to work with when editing your photos, but it also comes standard with 4GB, twice the memory of the 20" model.
Patrick

#year(Now())# for next year?

#year(Now())# returns the current year. What returns next
year?

cjdunkerley wrote:
> Is this what you need?
>
> <cfif month(now()) LTE 6>
> year(now()) -1 - year(now())
> <cfelseif month(now()) GT 6>
> year(now()) - year(now()) + 1
> </cfif>
I guess I won't know until July :)
Seriously - thank you very much! This is exactly what I was
looking for.
So, in English, it will read 2006-2007 through the end of
June. Then on
July 1 it will read 2007-2008?
I'm pretty sure that's what will happen. Thanks again.

FM to get previous fiscal month/year and calendar month/year for a date.

Hi All,
I am having a requirement to extract some data based on either the previous fiscal month/year or the previous calendar month/year. There is no company code input to find the fiscal/calendar month/year.
At selection screen, user can select either fiscal or calendar selection.
Based on the selection, the data will be extracted.
For the system date, we need to calculate previous fiscal month/year or previous calendar month/year and populate the calculated data back to the selection-screen.
Can you one of you please suggest an FM to find previous fiscal month/year and previous calendar month/year.
Thanks in Advance,
Regards
Gowthami

Hi Gowthami,
You can use following function module to calculate previous / next day or month or year.
   call function '/SAPHT/DRM_CALC_DATE'
      exporting
        date      = sy-datum
        days      =
        months    =
        sign      = '-'
        years     =
      importing
        calc_date = .
Here, you can give '-' to sign, if you want previous day / month / year.
Here, you can give '+' to sign, if you want next day / month / year.
And depending upon your requirement, you can pass suitable value to days / month / year.
e.g. To calcualte last month,
   call function '/SAPHT/DRM_CALC_DATE'
      exporting
        date      = sy-datum
        days      =
        months    = 1
        sign      = '-'
        years     =
      importing
        calc_date = wv_prev_month.
so it will give '23-01-2008' . Then convert it in the required format as per your requirement using string function concatenate.
Hope this help you.
Regards,
Anil

Configuration for 50% CVD/ADC in First year and 50% in Next Year

Similar Messages

Maybe you are looking for