Configuration for Cisco SPA112

Anyone managed to configure SPA112 adaptor for incoming calls? 
I have configured for outgoing and able to make calls but incomming just nothing.....
I have 1 channel and one number associated to the SIP account 
Firewall ports 5060 - 5062 are allowed through
internal IP address has ports forwarded to it

I think you're the first one to post that the Cicso SPA 112 will work for outgoing calls.  Would you be able to send me the configuration on how you accomplished this and what settings you used?
Do you use Skype out credits or simply dial from one Skype account to the other?  I would assume you do not have a Skype-IN account??

Similar Messages

  • RAID Configurations for Cisco servers

    Hi All,
    What is the RAID configuration for Cisco Appliance(Version 8.5) like CUCM, CUPS, CUIC, Unity etc?RAID Configuration will be done while installtion itself or we need to do it explicitly?
    Regards,
    Adithya

    Hi Geoff,
    Thanks for the reply. Just wanted to know whether if this RAID configuartion is similar to the other server RAID where we install Cisco applications.(Like OS & Application Software is RAID 1 and Database is RAID10).
    Regards,
    Adithya

  • Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

    Hi All,
    Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
    Any help would be greatly appreciated.
    Thanks in advance.
    Samir

    Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

  • Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router

    Hi All,
    We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
    Any help would be appriciated.
    Thanks in advance
    Samir

    Hi,
    *** Device Details for d0151-100 ***
    Protocol ==> Unknown / Not Applicable
    Selected Protocols with order ==> TFTP,SSH,HTTPS
    Execution Result:
    Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
    This is the error while doing syn archieve.
    I am not sure about Rtr7000 version but we have latest Rtr7000.
    Waiting for your kind reply.
    Samir

  • How we archieve configuration for Cisco ASA 5500 series appliances

    Hi,
    We need to archieve configuration for Cisco ASA 5500 series appliances.
    We have Cisco works LMS 3.0.1.
    Device package installed is 4.2
    Any help would be appricated.
    Thanks in advance.
    Samir

    Hi ,
    Thanks for your answer.
    Right now we are using TACAS to login in to the ASA. That means we need single username and password to login via
    Cisoworks. Am I correct ?
    Waiting for your reply.
    thanks,
    Samir

  • Optimal configuration for Cisco E3000 Router

    Hi All,
    Following are the details of my current home network setup, I would like to hear more recommendations and drawbacks of this setup.
    ISP has provided with a Cisco  DPC3825 DOCSIS 3.0 Gateway which has 4 Ethernet ports and a wireless networking but only 2.4 GHz.. This router is connected to the cable CPE box to internet. I have enabled the Firewall features of this router and disabled the Wireless network. This has also the DHCP server running. 
    The Second router is a Cisco E3000 which supports 2.4 GHz / GHz wireless networking. Connection to gateway is made via the 1st Ethernet port of gateway and then to the Internet port of E3000 router. I have connected my wireless devices to E3000 with GHz wifi lan. This router also has the firewall activated and DHCP server running as well.
    Both routers have WEP2 Personal / AES security configured. Currently these two devices are on two different IP ranges ..etc gateway is 192.168.0.1 and e3000 is 192.168.1.1.
    The E3000 is primarily configured for my online video for TV (Panasonic Vireacast). Please let me know if this is the best configuration or any other possible options.
    Thanks,
    RG

    This configuration is called LAN to WAN configuration and this is the best configuration considering that you want to behave both the router as a router.
    Because the other confiuration would be LAN to LAN then you can only use 1 router as a router and 2nd router as a switch.
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=529c188bc0ee4f7da79ffc22f2be33ec_4579.xml&pid=80&r...
    The first configuration in the article is is LAN to LAN, scroll down the window for LAN to WAN configuration.

  • TACACS+ configuration for Cisco ASA

    I tired configuring TACACS+ configuration for ASA but unable to complete it. I have ACS 3.3 for all other Cisco Routers and Switches

    Leo,
    I was looking around and come across this post. It's very late, however, wanted to add my inputs for other community members.
    RSA Token/One-Time-Password support available with ASDM only in SINGLE ROUTED MODE. If you are in Single Routed Mode, you can do OTP with ASDM if you are running ASA 8.2+  with ASDM 6.2+.
    If the firewall is running in multi-context and transparent mode. It won't work. Below is the enhancement request that was filed for the same feature to be supported.
    CSCtf23419    ASDM OTP authentication support in multi-context and transparent modes
    With WLC is yet not possible and there is a enhancement request filed.
    CSCuf61598    WLC: Need ability to support multiple sessions via OTP authentication
    ~BR
    Jatin Katyal
    **Do rate helpful posts**

  • For Cisco SPA112: can I make dial plan that can use 6 digit number without having to dial the area code 00357 but not for 0030?

    Cisco SPA112:
    Can I make dial plan that can use 6 digit numbers without having to dial the area code 00357 but also being able to dial 0030xxxxxxxxxx numbers?

    If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789

  • Collector Configuration for Cisco LMS

    Hi,
    I have a cisco LMS 3.2 , what collectors need to be configured inorder to get the critical alarms such as HighBroadcast Rate in network

    Device Fault Manager (DFM) is the module or application that would give you these kind of alerts;
    a quick overview about DFM can be found here
    first I recommend to install all available updates and patches for LMS;
    after the initial discovery of LMS to get your devices into DCR you have to import device into DFM as described here
    DFM is working with SNMP polling, thus you should get the events in the AAD (Alerts and Activities Display) if DFM has SNMP access to your devices;
    Be aware, that DFM counts non-unicast packekts for the HighBroadcast Rate (broadcast and multicast packets; ifInNUcastPkts + ifOutNUcastPkts)
    also read the user guide for DFM to get a general understanding of DFM

  • LZW 4G LTE Router Configuration for Cisco 881W (Teleworker, VPN)

    I can't get the configuration of the the router to allow traffic on my company's VPN. The router is connected to the internet and otherwise works fine but whenever I attempt to connect via Cisco AnyConnect or the Cisco router, I can connect but can't access any intranet resource, email, etc. In essence, I can authenticate but can't do anything.
    I've tried contacting NetGear and they referred me to Verizon. I contact Verizon and Technical Support does not have any information about how to configure their own routers. I'm waiting to hear back from an escalation group in my company's technical support.
    I tried opening ports for UDP/TCP already and I attempted to create a static route but the router tells me that my info in incorrect (but I have no idea what is wrong either).
    Has anyone come across a similar situation or could help point me in a direction towards a solution?
    Thansk.

    Check with the network administrators for your company.  They should be able to confirm the version of your Cisco AnyConnect VPN and the requirements that it needs to open and sustain a tunnel.  Once you learn the requirements you can come back to the VZW forums for assistance on configuring your device.
    Normally when a VPN authenticates but does not allow any communcation it means that there is a port, firewall rule or NAT feature conflict somewhere on the local network.  For example, the old Cisco IPSec VPN requires UDP ports 500/4500, IP 50 and TCP 10000 to be open in addition to NAT-T enabled on the VPN server.  Your company may have customized the VPN for thier enviornment so you really need the details before you can move forward.
    A good link I like to save for instances like this (old Cisco VPN):
    http://www.canvassystems.com/blog/articletype/articleview/articleid/14/how-to-fix-cisco-vpn-client-error-412.aspx

  • Cannot access configuration for cisco srp527w voice

    I am trying to input my SIP configuration to the cisco srp527w voice set up but there is nothing there that I can input. All I can see is info, system, user 1 user 2. When I go to system, it ask for IVR user password...I tried using admin and cisco nothing change. Appreciate if some could help. thanks

    Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

  • SNMP Configuration for Cisco Unity

    Dear All,
    Can you please tell me how i can configure SNMP on my Cisco Unity.
    Please help me.
    Regards,
    Malik.

    Dear All,
    Can you please tell me how i can configure SNMP on my Cisco Unity.
    Please help me.
    Regards,
    Malik.

  • Funny time with CISCO SPA112

    I have configured succesfully CIsco SPA112 - almost works, I just cannot change admin password.
    I log in with default user pass: admin/admin
    I go to adminsitration menu, but on the left nothing appears as in admin just link "quick setup" - and nothing related to "Adminsitration"
    Any idea what is going on ?
    Thanks,
    Peter

    Hello Peter,
    Have you tried using a different browser?  Most of the admin web pages work best in Internet Explorer or Firefox.  I know they sometimes have a lot of trouble displaying correctly in Chrome.
    Because you are right, for the SPA112 user name and pasword changes are under Administration > Management > User List.
    Hopefully that will make it show up for you, but if not let me know, and we will try something else.
    Christopher Ebert

  • Cisco devices configuration for CW-LMS

    Hello,
    I am new to CiscoWorks LMS. I am working with a LMS 3.2 fresh installation. I added all the devices (routers, switches and 3 ASAs) into the DCR. Now I need to know how to configure the devices to send relevant info to the CW LMS machine. I am looking for something similar to this:
    http://www.cisco.com/en/US/docs/solutions/Enterprise/Security/SAFE_RG/chap10.html#wp1056411
    This is a deployment model for Cisco MARS, which shows what to configure on each device in the network to send the most relevant info (syslog, netflow) to the Cisco MARS.
    Is there a best practice for CW LMS regarding this? For example, what syslog level should the routers send to the LMS?
    Thank you!

    There is a deployment guide whitepaper for LMS at http://www.cisco.com/en/US/products/sw/cscowork/ps2425/prod_white_papers_list.html .  As for what to do syslog-wise, you should configure your logging facility to be local7 (this is the default on IOS, but not on ASA OS), and send at least sev 5 or higher messages.  You may want to bump that up to sev 6 (informational), but sev 5 for IOS devices will be sufficient to get things like configuration change messages.  For CatOS, you definitely want sev 6.

  • What's "SAVE" configuration command for Cisco switch/ router?

    What's "SAVE" configuration command for Cisco switch / router? I know Switch#copy running-config startup-config works well,
    but so long, any other command that easy to remenber?

    What's "SAVE" configuration command for Cisco switch / router? I know Switch#copy running-config startup-config works well, but so long,
    any other command that easy to remenber?
    yes, here: Switch#write,and want to know more about the Cisco switch, please visit:http://www.3anetwork.com/cisco-switches-price_c1

Maybe you are looking for

  • Last update does not work with Ford Sync with Applink

    Spotify has been working all right with the Ford Sync with applink in my car (C-MAX, late 2014). However, with the last update of the Spotify app from Play Store, just a few days ago, it has stopped working, because it is not detected by the car. Eve

  • R.I.P. Mr Steve Jobs

    bless you for a job well done

  • Is it that underpowered?

    I just bought this computer. My old pavillion was giving me fits and the budget was tight, so I chose a bottom of the line machine. I do Microsoft Office, Quickbooks, Family Tree Maker, etc. I don't do any gaming or anything that would require a part

  • Camera RAW only converts 1 image at a time

    Hi, I recently upgraded to CS6 from CS5.5 on Windows, and i recently just did some work in Camera Raw,  and I noticed that when I saved the RAWs into JPEG format, it only did one image at a time, instead of the 3 at a time that CS5.5 did. How do i ch

  • Exchange 2003 SP2: 'Cannot get mail' - another one...

    Background info: I am running a budget exchange system, much like other small businesses out there. I have a self signed cert from an internal CA that i have installed on the exchange server and installed on the iphone. I dont get any cert errors whe