Configuration for connecting 3 wifi routers
Good Day to all,
I am Having problem connecting 3 wifi routers for extensions.
the 1st 2 routers worked fine.
the 1st one is connected to the modem using 192.168.1.1 , the second one is connected to the the 1st wifi router configured 192.168.2.1 and worked so fine. the 3rd one is configured 192.168.3.1 but no luck at all.
Can somebody help me whats the correct configuration?? or any problem with my configuration??
Pls Help me.
Good day and God Bless Us All
arman from Philippines
Router 1 192.168.1.1 DHCP enabled
Router 2 192.168.1.2 DHCP disabled
Rotuer 3 192.168.1.3 DHCP disabled
Connect the three via LAN-LAN with a cable
SSID's can all be the same, different channels... 1,6,11 is best.
Similar Messages
-
Best configuration for maximum WiFi speed?
Hello, I am trying to configure my network for the best WiFi speed. I have a Comcast/Xfiinity Modem/ Wireless Router (SMCD3GNV) with speed of 50 Mbps down and 10 Mbps up (acutally 87 down and 11.5 up last time tested) and 3 Airport Extremes, and a 16 port GB switch. I am really confused about what should be plugged in to what and how to set up the Airport extemes for best WiFi speed for laptops, iphones and iPads etc. . I have a large house and want the WiFi to be available everywhere. Shoud I plug the Modem/Router and the first Airport extreme into the switch and then set up the other 2 Airport extremes as extended networks, or should I plug all the Airports into the switch, or should I plug just the first Airport into the switch and then connected the other 2 Airports into the 1st? Like I said I am really confused. Any help you can offer would be appreciated.
Thanks in advance,
VicFor the best configuration for maximum WiFi speed, connect all your Extremes to the switch.
The effective range of your wireless network will be a function of the distances the Extremes are from one another. Each will be limited by Ethernet specification to a maximum distance 100m from the switch or adjacent Extreme.
This picture may help:
From Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations -
Advice about FXS Port configuration for connecting to modems
Hello all,
We have not confirm the problem, but we are having reports that analog devices like USR V.92 Modems and Power meters are not connecting or dropping the connection. We have an ISR 2911 with the 4-port FXS-DID WIC (VIC3-4FXS/DID), configure to an internet SIP truck provider. The Router is running IOS 15.3(3)M2. If we connect an analog phone to the FXS port and call, voice is clear. So the question is what configuration settings should we have for FXS ports and/or dialpeers for connections to modems? Attached is the current configuration of the router.
Do we have to be worried about Codec? If so which Codec should we configure?
Any Physical FXS settings should be set?
Are my DSP setup correctly?
Again, I'm at a loss, as voice sounds good and my searches for modem connections to FXS Ports on CUCME is coming up dry. Any help would be great.
As far as the "Power Meters", we are talking substation power meters.
Thanks for any advice you can spare and your time,
NickHi Amit,
No problem on the delay. Your help is very much appreciated.
You're losing me a bit. Because I don't know if your giving me dial-peer 1 as an example. 1 being just a random number. Or your telling me to change my current dial-peer 1 configuration. Which is currently a pots dial-peer:
dial-peer voice 1 pots
description POTS port 0/1/0
destination-pattern 111111111
port 0/1/0
dial-peer 1000 voip is our outbound call leg. Sorry call legs are not exactly clear to me yet. In fact they haven't been in years. :) So change my dial-peer to dial-peer voice 1 voip?
My other question still unknown to me is should we use:
fax protocol pass-through g711ulaw
Even though we are trying to use a modem and not a fax? Also this command is a dial-peer command and not a global command. So what global command should i be using?
Again thank you for your time and help,
Nick -
How to configure for connecting remotely?
Hi forum members, I installed oracle 10g and I created a database sucesfully on gentoo linux and solaris 10, On gentoo linux I made a connection between a test database and a java program using jdbc,but now I have to make a connection between a small database created on solaris and a little java program using jdbc drivers, Do you know which basically configuration should I have to do on server side (solaris 10) and the client side (gentoo linux)? Or which page should I look for in order to get the right configuration?
Thanks in advanceYou would rather need to search out your in problem in heterogeneous forums . i believe that is a right forum for you.
hare krishna
Alok -
Switch port configuration for 3500i AP
Hi,
We are due to install a brand new enterprise WLAN based on the WiSM2 platform, 3502i AP and WCS. The APs will be plugged into the 2960S-24TPS-L.
I have scanned over all documentation and cannot for the life of me find a recommended switch port configuration for connecting the AP to the switch in terms of speed / duplex etc. For example, should I just configure the port to auto detect, or is forcing the speed / duplex the way to go. I could also do with knowing other best practice configurations for AP connectivity.
Any help would be greatly appreciated.
Chris.The AP comes online with just auto detect, but I want to know if there are any benefits to forcing this to 1Gbps / Full duplex, or even if this is the right way to go. I suspect auto detect is the best method.
-
Backend configuration for Fiori client
Hi experts,
we would like to try out the Fiori client for Android (Link: SAP Fiori Client - Android Apps on Google Play), but I don't know which URL has to be entered in the client.
SAP fiori is accessable on our SAP Server in web browser via URL https://server:port/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html, but when I try to use that URL within Fiori client I get a 404 error. The same goes when just I use https://server:port.
Which URL does the Fiori client expect for connection to SAP backend? Or does this indicate that the backend isn't fully configured for connection from SAP Fiori client?
Thanks for your help!
Best regards
Alej
Tags edited by: Michael ApplebyHello Krishna,
Thanks a lot for your very fast response!
You were correct... I am ashamed to tell you that it was a network issue.....
Unfortunately I have a follow-up issue. Instead of the new fancy login page I get only get an old-fashioned one when starting the LaunchPad URL (the one also mentioned in my first post):
When starting the fiori admin panel via URL https://server:port/sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html the new login page is properly displayed:
Any idea what is causing this? It puzzles me since both URLs should use the same HTTP handler from ICF node /default_host/sap/bc/ui5_ui5?
Kind regards
Alej -
Hello, is it normal that my connection wifi is often disconnected, my configuration is a imac under mountain lion which I bought yesterday, sorry for my english im french,
thanks for the help and for your answersRésolution des problèmes Wi-Fi
-
My iPad2 always ask password for 2 familiar Wifi routers, 1 at home and 1 in office. How to fix it? Tks.
Hi, CHAUKTV.
Thank you for visiting Apple Support Communities.
I understand that you have to enter the password every time you access a known network. This can be expected behavior if this is how these access points are configured. However, go through these steps in the article below as they may help.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/en-us/TS1398
Cheers,
Jason H. -
Is there a fix for the wifi connectivity issue after ios6 update?
Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Please give me simple directions to reset a password to m wifi choice...since I downloaded the new updates for IOS7, yesterday! My ipad was frozen, had to go to Itunes to restore it, after it was restored, I went to go on my wifi .....and it won't accept my password...nor will it allow me to make up a new psassword....now what do I do??
The correct password is printed on the route's label.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
no image
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
hey all..i hv problm .. i cant connect wifi properly ..its disconnect itself after evry 5 mints and reconnect after evry 5 mints.. signal showing but there is no avail internet ..plz helpe...sorry for bad english but hope u will understand..
If your connection won't 'stick', check for interference in that area from other devices on competing channels, etc.
Configure your choice of band/channel with interference robustness, but mainly reduce the sources to be sure it's not just a too noisy environement.
Still no joy, be sure your software is up to date and then walk it into the nearest Apple store for a professional opinion
Good luck in any case. -
ASA 5505 configured for WebVPN connecting to Citrix Web Interface
ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface . The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark citrix server http:// 172.30.40.5.) i enter the citrix and then for example i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
thanks.Teymur,
Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error. It is possible that it is generating a different error.
The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1. Can you confirm the exact version of code you are running on the ASA.
If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
Thanks
-Jay -
Need help to Configure FTPS connection for File Sender Adapter
Hi,
I want to Configure, FTPS connection (Secured Connection) for File Sender Adapter. Could anyone please guide me, what Information I require to configure. I just want to know what Information should I request the team inorder the configure FTPS so that it can be deployed properly.
I have checked with [SAP Help Link|http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm] and while configuring the communication channel found that I need Keystore and the X.509 Certificate and Private Key. which needs to be deployed on the J2EE server by using the Visual Administrator.
Is there anything else, I need to configure.
Any help would be appreciated in this regard.
Thanks & Regards,
Varun.KThe basic things are Certificate/Keys which you already know. Usually it is enough for running a sceanrio.
However, if you have additional requirements, like FTPS for "Connection Security" for encryption, then you may need additional details like commands. Rest all settings are same as FTP.
Regards,
Prateek -
I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive. Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives? So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?
You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs. (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.) This will prevent you from ending up with merged data. You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l.
Maybe you are looking for
-
How should I tackle battery drain issues?? I'm fed up
I'm fed up a bit for my Z3 C battery life. This is my second query regarding battery life. Does keeping Mobile data and Whatsapp running ON even in standby mode drains the battery?? I usually get just 1 or 2 whatsapp messages in an hour or two. My ph
-
Hi, A couple of months ago I installed CS6 Design & Web Premium. All seemed fine until a few weeks ago I found I seemed to be barred from using Acrobat - I forget the details but I think an error message noted that the product hadn't been registered.
-
I need a report of PS Text assigned to Project Definition or WBS Elements.
Dear Friend's I need a report of PS Text assigned to Project Definition or WBS Elements. By putting Project Definition or WBS Elements i must get all PS Text & print option is also required. How i can do this in PS module. Regard's Sandeep
-
Ambiguity in use of MIGO in Subcontracting process
Hi I could not able to use MIGO for transfer of components to SC vendor with reference to Subcontracting order. (using 'transfer posting' application and in reference, 'purchase order' is not been provided to use 541 mvt with ref to SC PO). Whereas t
-
Reorder Toolbar Items in a Skin
Hello, I used the skin editor and was able to add a logo I wanted in my toolbar, however I would like the logo to display on the left (as the first item). I went and edited the skin file in wordpad, but re-ordering that did nothing for the output bu