Configuration for ECC 6.0

HI friends,
Can anybody tell me what is the configuration required
for installing ECC 6.0
regards,
phani.

HI,
Thanks for your fast reply, Is 1 GB ram suggestable or more required...
regards,
phani.

Similar Messages

LDAP Configuration for ECC 6.0 ( ABAP Stack only)

Hi,
Can any one guide me with the steps for the LDAP Configuration for ECC 6.0 ( Abap stack only).
Some of my observations are....
I can see the LDAP Support in the Installation master at the following path.
1. Additional Software Life cycle Tasks --> Application Server --> LDAP Support.
But the prerequisites for this task is given as "You must have extended the LDAP schema for the sap data types before.".
When i am goint thru service market place i came across the following note.
Note 888848 - Notes on schema enhancement with RSLDAPSCHEMAEXT.
Thanks,
Tanuj

Dear All,
We are trying to configure the LDAP using with active directory . In the
step of "Synchronization of SAP User Administration with LDAP
Directory"when executing the report"RSLDAPSYNC_USER" we are facing one
error.
Please find the trace file and error screenshot in the attachment.Please help us on
priority.
Please find the Trace log in the below:
RFC destination : LDAP_LDAPSE-01
Tracelevel      :      8,704
F5: Shutdown F6: Clear list F7: Dump status F8: Refresh list
[Wed Jun 26 11:15:38 2013]
Slot 0 (WIPROTECH): >>> ldap_initU(host="abg-mumabc-dc1.abgplanet.abg.com", port=389)
[Wed Jun 26 11:15:39 2013]
Slot 0 (WIPROTECH): <<< ldap_initU() == <NOT NULL> := connected
Slot 0 (WIPROTECH): >>> ldap_set_option(version=3)
Slot 0 (WIPROTECH): <<< ldap_set_option() == 0
Slot 0 (WIPROTECH): >>> ldap_simple_bind_sU(dn="poornataad", password: not initial)
[Wed Jun 26 11:15:40 2013]
Slot 0 (WIPROTECH): <<< ldap_simple_bind_sU() == 0 := success
[Wed Jun 26 11:15:43 2013]
>>>>Required attributes table
Line    0: "CREATETIMESTAMP" (length 15)
Line    1: "MODIFYTIMESTAMP" (length 15)
Line    2: "SAPUSERNAME" (length 11)
<<<<Required attributes table
Slot 0 (WIPROTECH): >>> ldap_search_sU(base="CN=poornataad,CN=Users,DN=abgplanet,DC=abg,DC=com", filter="(&(OBJECTCLASS=user)(SAPUSERNAME=*))", scope=2)
Slot 0 (WIPROTECH): <<< ldap_search_sU() == 91
>>> ldap_msgfree()
<<< ldap_msgfree()
Slot 0 (WIPROTECH): >>> ldap_unbind_s()
Slot 0 (WIPROTECH): <<< ldap_unbind_s() == 0
Please find the error screenshot in the below.
Regards,
Dilip Sampath.CH
+91-9619735957.

SOAP Configuration for ECC 6

Hi,
currently we are using Business connector to transfer XML files from SAP to 3rd Party. but as per the business requirements we need to configure SOAP in ECC 6 with only ABAP stack.
could some one help me to configure SOAP process in ECC Application, to send XML files to the external parties.
Thanks,
Ravi
201 724 6600

HI,
Thanks for your fast reply, Is 1 GB ram suggestable or more required...
regards,
phani.

LAPTOP CONFIGURATION for ECC 6

Hi Freinds,
Would like to purchase a laptop to install SAP ECC 6 Version for training purpose
Could anyone please suggest the laptop configuration.......
Thanks in advance....
Moderator message: not related to ABAP development.
Edited by: Thomas Zloch on May 9, 2011 10:08 AM

HI,
Thanks for your fast reply, Is 1 GB ram suggestable or more required...
regards,
phani.

ESS Configuration with ECC 5.0

Hi
I am trying to configure ESS with ECC 5.0 as the HR server
My J2EE system is WAS 7.0 with EP 7.0 and patch level 12.
I am getting the following error when I am trying to get the ESS pages in EP
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcXssMenu.AreaConfig.AreaConfig_Output.Serviceinfo): structure field Helperservice not found
I was successfull in configuring ESS with ECC 6.0. I did the same configuration for ECC 5.0 also.
Can anybody help me
Thanks

Hi Jeevan,
Please check your land scape is as per the notes:
1007341     SAP ERP 2004/2005 - supported ESS/MSS system landscapes
824757      Dependencies between SAP ERP component lists
1034385     BP ESS/MSS ERP2004 and ERP2005 on EPNW04s
1004528     SAP Self Services: Business packages and components
BR, Abdul

SAP IDES ECC 6.0 configuration for ess/mss

Hi,
Iam new to sap . i want to practice various scenarios in ess/mss in my own pc which is installed with ecc 6.0 . what are the configuration to be made in ecc 6.0 for maintaining about 10-20 users for using ess/mss scenarios. i have a knowledge on webdynpro java and little knowledge on ep and using r/3 server. The 10-20 users created should be able to use ess/mss through portal .
So, list the steps configuring for 10-20 users for using ess/mss in ecc ides 6.0 server.
Thanks & regard
prasad

<< Do not post the same question across a number of forums >>

MDD to ECC Configuration for Vendor PI Content

Hi,
I am working on MDM to ECC Scenario for sending Vendor details to ECC using the standard maps available in MDM BUSINESS CONTENT 7.1 SWCV.
There are two message mappings:
1) CREMDM.CREMDM04 to CREMAS.CREMAS05
2) CREMDM.CREMDM04 to ADRMAS.ADRMAS03
How should I configure the scenario in Integration Directory.
Do I need to use any splitting condition using Xpaths?
Can you send any blogs or SAP Notes avaiable for this?
Best Regards,
Harleen Kaur Chadha

Hello Harleen,
Maybe this can help you
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/107fabbb-b8ca-2b10-04b5-8f34729ef228
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/daa51a96-0b01-0010-738f-a0ecfd06104e
Regards,
lpbuff

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

Mapping Error in XI Configuration for MM-SUS Scenario

Dear Experts,
I am working on MM-SUS Classic Scenario,
We have done all basic setting in SRM, ECC and SUS.
Now we are configuring XI Scenario(Working on ESOA Architecture), while configuring XI Scenario, I follow the mention steps :
I have started from Integration Builder in XI (using T-code SXMB_IFR)
1. I have assigned two Business System( for ECC and SUS) In integration Builder (Creates Communication Channels Automatically) .
2. Modify IDOC and XI Communication in ERP and SUS Business system respectively.
3. Now select Tools -> Transer Integration Scenario from Inegration Repository and Create Scenario in it properly
(Included Assign Services, Configure Connections, Generate etc).
4. In last, save scenario.
After configuration XI I am not getting Scenario Data (Objects and Configuration Overview data) in it.
When i click to Check Configurability under Model Configurator of mine Scenario, I found following Errors ( I am Mentioning only some errors) :
Component View SE_Services_Procurement: Connection from Send Z_CREMAS_SUSMM to Business Partner empfangen has no mapping
Component View SE_Services_Procurement: Connection from Send_PO_From_MM to Receive_Purchase_Order has no mapping
Component View SE_Services_Procurement: Connection from ServiceAcknowledgementConfirmationRequest to ServiceAcknowledgementConfirmationCreate has no mapping
Component View SE_Services_Procurement: Connection from InvoiceRequest senden to Receive INVOIC has no mapping
Kindly correct me if am missing some, and help me out, what should have been done to remove this mapping errors.
Thanks in advance,
Regards,
Pawan Keshwani

If you are on >= SP9 you do not need to perform that action at all.
Go to SU01 transaction assign SAP_XI_DEVELOPER role for the desired users and try it.
regards
Shravan

How to install the ADS for ECC 6.0?

Hello All,
I have few questions before I can start with my problem
1) Is the ADS a part of the WAS for ECC 6.0 ?
2) Is any Ehp available for installing the ADS separately?
My requirement is to have a PDF application run in ECC 6.0 . I have no idea about the architecture like weather it includes the ADS as we have for Java WAS 6.0 SP 14.
What my team is doing is deploying the application in the Java WAS currently. But they need to deploy it to the same server i.e. ECC 6.0.
I would like to know what is the process to install the ADS in ECC 6.0. And if it is already installed then how to configure that.
Let me know if you have any questions. Looking forward to you.
Regards
DK

Hi Dipendra,
For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT user id creation and roles assignment and RFC destination creation etc..
Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
You can start by read the note 736902 to get the credentials for the ADS.
Hope this answers your question.
Thanks,
Greetson

Problem in setting up XCM Configuration for Local Server

Hi
I have installed Local J2ee engine on my computer and have deployed E Commerce B2B B2C sca packages.
I am trying to complete the XCM configuration for my Local Engine. For below 4 links, I have done the configuration, creation of JCO, Shop, etc is done and have tested the JCO, the test is successful. JCOs are pointing to ECC 6.0 which is development server and on development server the XCM configuration is working fine.
http://<host>:<port>/b2b/admin/xcm/init.do
http://<host>:<port>/b2c/admin/xcm/init.do
http://<host>:<port>/isauseradm/admin/xcm/init.do
http://<host>:<port>/shopadmin/admin/xcm/init.do
But below 2 links are not working and I am getting "Page can not be displayed" error.
http://<host>:<port>/isauseradm/init.do
http://<host>:<port>/shopadmin/init.do
I need to created 2 shops in http://<host>:<port>/shopadmin/init.do but since the page is not displaying I am not able to proceed and hence when I try to login to b2b b2c application
http://<host>:<port>/b2b/init.do and http://<host>:<port>/b2c/ init.do , I am getting an error
"The shoplist read from buffer is empty",
I think this error can be resolved by creating 2 shops in http://<host>:<port>/shopadmin/init.do, but
http://<host>:<port>/shopadmin/init.do itself in not displaying.
Please can you help.
Thanks
Edited by: Neha Bhatia on Jun 4, 2009 10:31 PM

Hi
I checked the mentioned Patch Levels, everything seems to be fine.
After I did few changes in JCOs and checked the XCM configuration throughly shopadmin URL (http://<host>:<port>/shopadmin/shopadmin/init.do) has started working.
Now I have maintained 2 shops and can see the B2B and B2C web portals fine.
But as soon as I select any material, it is giving error saying error in XCM configuration related to IPC.
could you pleaase help me out with this?
Also, as soon as I click on the B2B Login link, it dumps.
And useradmin URL http://<host>:<port>/isauseradm/useradmin/init.do is still giving "Page can not be displayed",
These problems are related to XCM configuration, but not sure where exactly and which configuration is missing. please can you suggest ? Any XCM configuration related document will also be helpful.
Regards,
Neha

IDoc receiver AEE: Error "Configuration for Sender/Receiver Partner Number/Port is incorrect"

Hi all,
We are on PI 7.4 AEX SP 7. We are trying to get the following scenario working: Inhouse warehouse management system (JMS) --> PI --> ECC (IDoc)
Sender is configured as 3rd party technical system system with business system maintained in SLD
business system has logical system assigned in SLD
adapter specific identifiers show logical system in ID / NWDS
logical system is defined in receiver (ECC system)
partner profile is created in ecc for this very logical system (inbound parameters)
No mapping of EDI_DC40 node in ESB (complete node disabled)
no header mapping in ID / NWDS
receiver IDoc AEE adapter is configured to not enforce control record (Control Record in IDoc XML = Not Mandatory)
no Identifiers specified in receiver IDoc AEE adapter
My guts feeling is that this should work, however, it doesnt't. Failing with "The Configuration for Sender/Receiver Partner Number/Port is incorrect. Enter proper values in Sender/Receiver Component"
Any thoughts are highly welcome.
Cheers
Jens

Hi,
The error mentioned by you is not related to the port..but its related to the Application ...
IDoc 51 means idoc has been received in R/3 client and when it tries to process it ended in error..
Check with the functional consultant for the error you have received..
HTH
Rajesh

Define Tabs and Process Configuration for Template (HAP_TA_CONF)

I am currently building a new appraisal template for my client and I have configured the process timeline in the development system via the IMG node Define Tabs and Process Configuration for Template (transaction code HAP_TAB_CONF).
Does anyone know how to transport the tabs and process configuration through the system landscape?
We are on SAP ECC 6.0 Enhancement Pack 4

Hi Sushil,
I have used the report RHMOVE30 as you recommended and it worked perfectly in one run. I did not have to create custom relationships. I simply selected all the Process Item (VH) objects for my appraisal template and ran the report.
Many thanks for your help. It has saved me having to configure the tabs and process timeline in each client.
Janet

ALE configuration in ECC and 4.7

Hello guys
Is there any difference in ALE configuration in ECC and 4.7??

Summarised step follows below...
ALE settings for IDOC
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also read this blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a>.
Do a SDN serch and you can get a lot more that this
~SaNv...

Http RFC destination for ECC to PI Connection Error

Hi,
While doing the proxy runtime configuration http RFC destination for ECC to PI .
I configure the RFC destination as below ---
Target Host -- PI Host
Service No -- 50000
Path Prefix --- /sap/XI/engine/?type=entry
Login Security Details
User Id -- PI user id
Password --- PI password
While doing the Connection Test , I got the error "ICM_HTTP_CONNECTION_FAILED"
I checked T-code in ECC system SMICM and ICM is in green status and I checked the services are activated in SICF transaction.
Please let me know how to resolve this issue.
regards,
Rohit

Hi Rahul,
I checked all service are activated in SMICM and I configured the FQDN also.
Now I cofigured the Service No --- 8000(http port no of PI) instead of 50000(J2EEport no of )
Target Host --- hostname
and did a Connection test...then I am getting a status as "http reponse 500" and status text as "empty http request received".
pls let me know is it correct configured or not.
regards,
Rohit

Configuration for ECC 6.0

Similar Messages

Maybe you are looking for