Configuration for FMTB transfer commitment/actual totals to FI

We use transaction FMTB to transfer commitment totals to FI. Based on specified value types, such as purchase orders or funds reservations, the transaction will reallocate between unallocated fund balance and reserve for encumbrances.
In ECC 6.0, the functionality of this transaction has been expanded. In addition to the above transfer, it can also be used to transfer commitment/actual totals to the Budgetary Ledger. The Budgetary Ledger requires that the Budget Control System is activated. We do not use this functionality. We only wish to continue with the original functionality described in the first paragraph.
The program underlying transaction FMTB has changed, from RFFMTOBL in 4.7, to RFFMTTTOBL in 6.0. The configuration for the transaction has also changed drastically. We have tried everything which makes sense to us, but transaction FMTB is unable to find relevant data in the system. The message is "No suitable records found." We have looked at the contents of table FMIOI and verified that the data does exist in the table for the correct accounting period.
Are any of you familiar with this transaction in ECC 6.0? If so, can you please give me some guidance as to how to configure this transaction? Please be as specific as possible.
Thank you. I will award points for helpful answers.

Hello Somar and Imran,
Thank you both for your suggestions. I have examined each of them and they do not appear to be related to the problem.
We have a programmer looking at the transaction in debug mode. We do not have a solution yet, but we have found something which may be causing the problem. The program appears to be trying to join two similar but unrelated fields in different tables.
It appears to be trying to join value type FM_WRTTP in table FMIOI (Commitment Documents Funds Management) to BCS value type BUKU_VALTYPE in table FMBL (Funds management budget document lines). Since the values in these two fields will always be different, the join will always return no values.
We have not yet figured out why this is happening.
Aoife

Similar Messages

DMS configuration for attachement transfer from SRM to R/3

Hi,
SRM 5.0
R/3 ECC6.0
Scenario : SRM SC attachment transfer to PR in R/3
I have done the DC10 and DC 30 configuration in R3
BADI BBP_CREATE_REQ_BACK is implemented
The attachement transfer is not happening to R/3
can someone let me know the necessary DMS configuration to be done in backend system and some steps to validate the SRM configuration i have already done
Thanks
Jayesh

Hi
<b>Please refer to the links below -></b>
Re: Attachments in PR and PO
Re: Sending attachments from SRM to SAP Purchase Requisition
Re: Transfer SC attachment from srm 5.0 to backend R/3
Re: Attachments to backend
Re: Attachments in PR and PO
Re: URL vs. document attached in back end EBP 4.0 Classic/4.7 E
http://help.sap.com/saphelp_47x200/helpdata/en/41/648838ab4e8a11e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d6/806c39917d423ee10000000a11402f/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/9b/c2b9375e62545ce10000009b38f889/frameset.htm
Do let me know incase you still have any queries.
Regards
- Atul

Why system is capturing Log for Document transfer and Compliance check

Hi All
Although I have removed
TD_MAP Movement Data : Document Replication Mapping (Live)
TD_CCH Movement Data : Compliance check Document (Live)
in custom document configuration , then also system is capturing log for document transfer and Compliance check result.
If my understanding is wrong then what is the use of Log control in customs document configuration for
Document Transfer
Document Check
Thanks
Akhil..

Hi Akhil,
For some situations, GTS allows you some control over the logging by specifying the Profile to use. But if you do not specify a Profile, logging still occurs using the default values in the standard code.
Regards,
Dave

Budget Updation (commitment,actual) after cost transfer

Hi Gurus
we are going to start one project by next month.For that we are finalizing wbs element etc.this project will be in separate plant.
but initial expenses like land acquisition,statutory expenses are already booked against cost center.now we want to transfer the cost in cost center in to wbs elements.I know this can be done via KB11N. But the problem is when i am transferring cost budget details in CJ31 are not updating.means there is no effect in budget (commitment,actual,assigned)
My client wants to update commitment,actual in CJ30 after cost transfer from cost center to WBS
Can anyone help me on this?
Thanks in advance.
Regards
Haran.

Hi Hari,
The expenses transferred to WBSE will be in the form of actuals which can be seen in "Assigned" tab of txn. CJ30.
As per my understanding costing is already carried out in your project & you have used it for budget generation & these actuals were not a part of earlier costing then you can manually update the project cost & copy it again as budget in CJ30.
I hope it will help.

[svn:osmf:] 11205: Fix bug FM-169: Trait support for data transfer sample doesn' t display bytes loaded and bytes total for SWF element

Revision: 11205
Author:   [email protected]
Date:     2009-10-27 15:04:26 -0700 (Tue, 27 Oct 2009)
Log Message:
Fix bug FM-169: Trait support for data transfer sample doesn't display bytes loaded and bytes total for SWF element
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-169
Modified Paths:
    osmf/trunk/apps/samples/framework/PluginSample/src/PluginSample.mxml
    osmf/trunk/apps/samples/framework/PluginSample/src/org/osmf/model/Model.as

The bug is known, and a patch has been submitted: https://bugs.freedesktop.org/show_bug.cgi?id=80151. There's been no update since friday, so I wonder what the current status is, or if it's up for review at all.
Does anyone know how we can be notified when this patch hits the kernel?

Output Determination Configuration Setting for GoodsIssue(Transfer Posting)

Hello Gurus,
Can any one give the details for Output Determination Configuration Setting for Goods Issue(Transfer Posting).
Thanks N Regards,
Venu MG

hi,
PRINT OUT OF MATERIAL DOCUMENT AT GI/Transfer posting:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
Now go to MB90 entered the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. Sytem outputted all the material documents that has to be taken print out.
Regards
Priyanka.P

Change default mvt 311 for stock transfer reservation generated by system

Dear SAPper,
I used storage location '0003' planned seperately in material master MRP4 and set reorder point 100 and replenishment 100 too.
After the stock fall below 100 the system will create stock trasnfer to '0003' the 'from storage location' is still blank. the system used movement type 311
i want to used two step transfer 303 - 305 for this transfer.
of course 303 can not be used to reservation so i create customized mvt type 903 (copy from 303 and modify it)
but something still trouble is when the MRP generate reservation it always use 311 movement tpe
can i customized that when storage location planned seperately stock fall below reorder point, MRP generate resevation transfer with mvt 903 (not standard 311)
Please kindly help
Best regards,
Freddy Ha

hi,
actually there is 2 problems here
1. 303 two step is prohibited for reservation so i create 903 to be used in reservation for two step transfer with reservation
2. reservation is created automatically for storage location plan seperataly if the stock fall below reorder point, this problem is system always use movement type 311 sloc to sloc
i want to used two step sloc to sloc, so the reservation created using 903
can i configure it?
Best regards,
Freddy ha

Hardware configuration for 5.5

Hello Everyone!
I am a total newbie......
Anyway, I just purchased a new computer. Although many of you would laugh at what I bought, it was all I could afford. There are some good things about it and some probably not. My question is, I bought a 1.5 Tb hard drive (only 1) and I am wondering what is the best configuration for it? Should I partition it, etc.
As I said, I am a total newb at this and I am just beginning so I will not be making re-editing any motion pictures anytime soon but just taking old 8mm family stuff and working with this as my practice stage.
Thanks,
-myParkster

NEVER EVER do a partition !!!
Read http://forums.adobe.com/thread/650708?tstart=0
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all program installs
2 - 320G WD Win7 swap file and video project files
3 - 1T WD all video files... input & output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Internal Order Commitment/Actuals

Hi all,
I am writing regarding Internal Order budget.
As we know Internal order has 4 "dimensions" for Budget:
Total Budget
Actual
Commitment
Available Quantity.
In the beginning Total Budget = Available Quantity, when PR is created the amount from Available quantity is moved to Commitment, but I am interested in the next step, when PO is created the amount still remains in the Commitment section or not? For example if PR is created on 10000 USD and then PO is created only on 5000 USD what does happen there? Does Commitment has total 1000 USD or only 5000 USD?
And finally when after making GR in PO, as I know GR amount is subtracted from Commitment and goes to Actual section, is that right?
Thanks you all for support in advance.

Hi,
Yes you are right. You may create an Internal Order in your Development/IDES client and check for more clarity and understanding.

Best Xserve configuration for MySQL?

Basically, I'm trying to figure out the optimal configuration for our next Xserve. Obviously, more RAM, more CPUs, more and faster disks in RAID, etc will improve things. But considering that money doesn't grow on trees, what have some of you found to be particularly cost-efficient in building an Xserve to run mainly MySQL where there are many small INSERTs on indexed (!? tables of 10 million or more rows (DB size of ~1GB, presently). I realize it's kind of a "depends if" type of question, but I'm just curious what people have found. (I've also read that AnandTech article that wasn't too kind to Mach.)
Anyway, I was thinking of an quad-core Xserve with 4-8GB of RAM, and a RAID5 set of 15K SAS drives. Well, there's not much in terms of options anyway. But this box will be like I said 90% running services that depend on MySQL performance. Some Web services, but mainly automated MySQL stuff.
Should I even bother to look at a Sun or Dell running Linux?
I'm presently running primarily an Xserve dual G5 2GHZ with MegaRAID in RAID5. As I said, the key database is about 1GB with ~10 million rows (mostly in just two tables). So, small data sets, already heavily indexed... Anyway, any thoughts are very welcome. Here is a status snapshot of the past couple days:
Traffic ø per hour
Received 1,168 MiB 21 MiB
Sent 1,631 MiB 29 MiB
Total 2,799 MiB 49 MiB
Connections ø per hour %
max. concurrent connections 92 --- ---
Failed attempts 0 0.00 0.00%
Aborted 81 1.43 0.08%
Total 98 k 1,731.89 100.00%
Total ø per hour ø per minute ø per second
6,409 k 113.27 k 1.89 k 31.46
Query type ø per hour %
admin commands 41 0.00 k 0.00%
alter db 0 0.00 0.00%
alter table 7 0.00 k 0.00%
analyze 3 0.00 k 0.00%
backup table 0 0.00 0.00%
begin 0 0.00 0.00%
call procedure 0 0.00 0.00%
change db 98 k 1,734.77 1.56%
change master 0 0.00 0.00%
check 0 0.00 0.00%
checksum 0 0.00 0.00%
commit 0 0.00 0.00%
create db 0 0.00 0.00%
create function 0 0.00 0.00%
create index 0 0.00 0.00%
create table 1 0.00 k 0.00%
create user 0 0.00 0.00%
delete 210 3.71 0.00%
delete multi 0 0.00 0.00%
do 0 0.00 0.00%
drop db 0 0.00 0.00%
drop function 0 0.00 0.00%
drop index 0 0.00 0.00%
drop table 1 0.00 k 0.00%
drop user 0 0.00 0.00%
flush 0 0.00 0.00%
grant 0 0.00 0.00%
ha close 0 0.00 0.00%
ha open 0 0.00 0.00%
ha read 0 0.00 0.00%
help 0 0.00 0.00%
insert 214 k 3,776.04 3.39%
insert select 5,725 101.18 0.09%
kill 6 0.00 k 0.00%
load 0 0.00 0.00%
load master data 0 0.00 0.00%
load master table 0 0.00 0.00%
lock tables 16 0.00 k 0.00%
optimize 0 0.00 0.00%
preload keys 0 0.00 0.00%
purge 0 0.00 0.00%
purge before date 0 0.00 0.00%
rename table 0 0.00 0.00%
repair 0 0.00 0.00%
replace 0 0.00 0.00%
replace select 0 0.00 0.00%
reset 0 0.00 0.00%
restore table 0 0.00 0.00%
revoke 0 0.00 0.00%
revoke all 0 0.00 0.00%
Query type ø per hour %
rollback 0 0.00 0.00%
savepoint 0 0.00 0.00%
select 941 k 16.64 k 14.92%
set option 855 15.11 0.01%
show binlog events 1 0.00 k 0.00%
show binlogs 43 0.00 k 0.00%
show charsets 121 2.14 0.00%
show collations 121 2.14 0.00%
show column types 0 0.00 0.00%
show create db 15 0.00 k 0.00%
show create table 376 6.64 0.01%
show databases 129 2.28 0.00%
show errors 0 0.00 0.00%
show fields 675 11.93 0.01%
show grants 46 0.00 k 0.00%
show innodb status 393 6.95 0.01%
show keys 37 0.00 k 0.00%
show logs 0 0.00 0.00%
show master status 0 0.00 0.00%
show ndb status 0 0.00 0.00%
show new master 0 0.00 0.00%
show open tables 1 0.00 k 0.00%
show privileges 0 0.00 0.00%
show processlist 18 0.00 k 0.00%
show slave hosts 0 0.00 0.00%
show slave status 0 0.00 0.00%
show status 415 7.33 0.01%
show storage engines 8 0.00 k 0.00%
show tables 186 3.29 0.00%
show triggers 0 0.00 0.00%
show variables 283 5.00 0.00%
show warnings 0 0.00 0.00%
slave start 0 0.00 0.00%
slave stop 0 0.00 0.00%
stmt close 0 0.00 0.00%
stmt execute 0 0.00 0.00%
stmt fetch 0 0.00 0.00%
stmt prepare 0 0.00 0.00%
stmt reset 0 0.00 0.00%
stmt send long data 0 0.00 0.00%
truncate 0 0.00 0.00%
unlock tables 16 0.00 k 0.00%
update 260 k 4,600.62 4.12%
update multi 0 0.00 0.00%
xa commit 0 0.00 0.00%
xa end 0 0.00 0.00%
xa prepare 0 0.00 0.00%
xa recover 0 0.00 0.00%
xa rollback 0 0.00 0.00%
xa start 0 0.00 0.00%
Begin
Variable Value Description
Flush_commands 1 The number of executed FLUSH statements.
Lastquerycost 0 The total cost of the last compiled query as computed by the query optimizer. Useful for comparing the cost of different query plans for the same query. The default value of 0 means that no query has been compiled yet.
Slow_queries 338 The number of queries that have taken more than longquerytime seconds.

RAID 5 is the worst possible storage option for databases.
That's not to say it won't work, but it has an overhead that will impact disk I/O, especially writes and it sounds like your data set is write-heavy.
This is because a write requires a Read-Modify-Write process for every write - whenever you write data to the array it has to read all the existing data in the corresponding blocks, recalculate the new parity data, then write it all back.
This may or may not be a problem for you, depending on actual quantity and scale of the writes, but if you're looking for the best configuration, RAID 5 is not it.
For optimal performance use RAID 0. Of course, RAID 0 has no protection, so you need to deal with that.
The ideal combination is RAID 0+1, but that requires a minimum of four drives, while the XServe can only handle three internal drives.
As for the rest of it, you really need to analyze your data more before you can get an answer.
The number of rows is largely irrelevant if you're just inserting data. It has some bearing on indexes, so you need to look at how your data is indexed.
As for memory, the ideal configuration is at least enough memory for MySQL to load all the indexes into RAM - most lookups should be indexed and if those indexes fit entirely within the memory space you're off to a good start.
Note that the standard MySQL is 32-bit, so you're limited to 2GB for InnoDB or MyISAM (whichever you're using). You'll need the 64-bit version to use more memory than that.
Most performance bottlenecks (and gains) can be traced to either indexes (too many indexes can be just as bad as not enough), and application (there's significant overhead in opening a new MySQL connection (which is a large factor in the AnandTech article), so try to ensure that your application uses connection pools (where a number of connections are opened when the app starts, and reused through application processes rather that a new connection opened for every query). Without knowing the application it's impossible to narrow that one down much more.
As for Sun or Dell - sure, they're options. Just be aware that you'll need Solaris or Linux admin skills in order to get the most out of them. They may (but not necessarily will) perform faster at the end of the day, but it may also take you much time and heartache to get there.
The other thing that you don't mention is why you're looking to upgrade. Is the G5 currently stressed? If so, where? what's the typical CPU load? disk activity level? network load, etc.
It doesn't make any sense upgrading the machine if the network is your bottleneck - all you're going to do is move that same bottleneck to a different machine.

Pending Quantity in PO for stock transfer

Dear All,
I want to know the pending order quantity for stock transfer orders (plant to plant),I have tried
ME80FN,ME2L Etc. but all report are showing the pending quantity only after MIGO done by
the receiving plant.
Our requirement is like this that one plant created one stock transfer order to one
plant and he want to know the actual pending order quantity as on date considering
by deducting stock in transit (5B5T) (i.e. PO quantity 100 pcs - quantity delivered 50 pcs then actual
pending quantity should be 50 pcs but in mentioned report it is showing 100 pcs pending).
Please note in our case in every PO more than 800 line items are there.
Can any one inform me about standard report or any table where net pending quantity are getting
stored.I have checked table EKBE,MARD,MARC.
Regards,
SP Shukla.

Hi,
In mb5b u give movement type & check
Generally i do not think there is a std report, this we also faced, we developed a report with the help of ABAPer
Pandari

Proforma invoice not created for stock transfer order

Hi Experts
while creating a proforma invoice for stock transfer order between the plants we are not able to create proforma invoice , the process is replenishment delivery is created and Wm is also done and the billing with reference to delivery and the item category is relevant for billing with value J, and below is the message i get whilw creating invoice
     Technical data
         Tech. data details
          Client
          Group Number
          Sales Document Number
          Item Number of the SD Document         000010
          Schedule Line Number                   0001
          Counter in Control Tables              00
          Message Identification                 00
          System Message Number                  001
          Output Type                            E
          Message Variable 01
          Message Variable 02
          Message Variable 03
          Message Variable 04
          Group Type                             F
No biliing documents generated
Please suggest.
Thanks

This explanation is not in detail and hence I am not clear about your configuration settings.
First go to IMG Logistics-General => Tax on Goods Movements => India => Business Transactions => Outgoing Excise Invoices => Assign Billing Types to Delivery Types.
There ensure that you have assigned the billing type JEX (assuming that you are using the standard) to your delivery type NL.
Perhaps, you can also try with "D" for your item category in Billing Relevance field but I am not sure this will solve your issue. Try in development client.
thanks
G. Lakshmipathi

Getting SPWeb.CurrentUser as null with Windows Authentication (AD), when configured for Claims Authentication

Hi All,
We recently migrated to SP 2013 from SP 2010. We are using most of the OOB features, with a few custom code. We have implemented a custom ASP.NET Membership Provider that authenticates against a web service. This was working fine on SP 2010.
The entire code base was migrated to SP 2013 (with .net fw 4.5, etc) and any issues Compile / Runtime were fixed. However, we are stuck at one bug, which seems to be occuring only while trying to login with Windows Authentication. When a user tries to login
with Forms Authentication, the error is never noticed.
Scenrio: Login as Windows Authentiction.
Result: The user is signed into the system and is authenticated against the AD. For random page loads - it throws access denied (even though he is a site collection admin). While attaching a debugger, we found that, at times the SPWeb.CurrentUser is null (weird).
At the same time, the HttpContext.Current.Request.IsAuthenticated returns true. Which means the User is Authenticated, but not available in the SPWeb.CurrentUser object.
Attached are couple of ULS Logs that we found. The line which says IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 is a little disturbing. Can you please let me know what is happening here? I am not able to access the root site (http://win2012d2:1234/)
however, i am able to access (http://win2012d2:1234/SitePages/Home.aspx) just fine, without any issues.
Please note, this error is only when the user is logged into sharepoint as a windows user. The forms user faces no such issues.
ULS Logs:
Name=Request (GET:http://win2012d2:1234/)
Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0
Application error when access /, Error=Exception of type 'System.ArgumentException' was thrown. Parameter name: encodedValue
at Microsoft.SharePoint.Administration.Claims.SPClaimEncodingManager.DecodeClaimFromFormsSuffix(String encodedValue)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromLoginName(String loginName)
at Microsoft.SharePoint.ApplicationRuntime.SPHeaderManager.AddIsapiHeaders(HttpContext context, String encodedUrl, NameValueCollection headers)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PreRequestExecuteAppHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Getting Error Message for Exception System.ArgumentException: Exception of type 'System.ArgumentException' was thrown. Parameter name: encodedValue
at Microsoft.SharePoint.Administration.Claims.SPClaimEncodingManager.DecodeClaimFromFormsSuffix(String encodedValue)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromLoginName(String loginName)
at Microsoft.SharePoint.ApplicationRuntime.SPHeaderManager.AddIsapiHeaders(HttpContext context, String encodedUrl, NameValueCollection headers)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PreRequestExecuteAppHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
[Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2}
Unknown SPRequest error occurred. More information: 0x80070005
SPRequest.GetPageListId: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://win2012d2:1234/
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:
at Microsoft.SharePoint.SPContext.get_ListId()
at Microsoft.SharePoint.SPContext.get_List()
at Microsoft.SharePoint.WebControls.ScriptLink.InitJs_Register(Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(String uiVersion, Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.GetOnDemandScriptKey(String strKey, String strFile, Boolean registerDependencies, Control ctrl, Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Page page, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride)
at System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm)
at System.Web.HttpServerUtility.Transfer(String path)
at Microsoft.SharePoint.Utilities.SPUtility.TransferToErrorPage(String message, String linkText, String linkUrl)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorHandler(HttpApplication app, Boolean errorIsOnErrorPage)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorAppHandler(Object oSender, EventArgs ea)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.HttpApplication.RaiseOnError()
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
SPRequest.OpenWeb: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://win2012d2:1234/
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:
at Microsoft.SharePoint.SPWeb.InitWeb()
at Microsoft.SharePoint.SPWeb.get_WebTemplateConfiguration()
at Microsoft.SharePoint.WebControls.ScriptLink.InitJs_Register(Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(String uiVersion, Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.GetOnDemandScriptKey(String strKey, String strFile, Boolean registerDependencies, Control ctrl, Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Page page, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride)
at System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm)
at System.Web.HttpServerUtility.Transfer(String path)
at Microsoft.SharePoint.Utilities.SPUtility.TransferToErrorPage(String message, String linkText, String linkUrl)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorHandler(HttpApplication app, Boolean errorIsOnErrorPage)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorAppHandler(Object oSender, EventArgs ea)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.HttpApplication.RaiseOnError()
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

Hi Mohamed,
According to your description, my understanding is that the error occurred when users login with Windows Authentication.
From the error message, I recommend to check if the anonymous access is enabled for the web application.
And please also make sure that the users all are available and have permission to access the site.
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/en-US/28623bdc-a2f0-4876-9be4-9a764f106366/getting-spwebcurrentuser-as-null-with-windows-authentication-ad-when-configured-for-claims?forum=sharepointdevelopment
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Doesn't play songs, "itunes is not configured for use with mac-formatted"??

Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
Thanks for any thoughts!

Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
If there is anyone out there that can help please do!
Windows XP

Delivery cost for Stcok transfer through M.type : 351

Hi Experts,
Can anybody explain how to capture the delivery costs for Stock transfer through M.Type 351.
Also kindly explain the steps involved in configuration of the same.
Thanks in advance,
Prabu

Hi,
Once the Config releated to Setup stock transfer order is done.
To include the cost you need to include the pricing procedure related to STO needs to be assigned to your schema group.
Goto SPRO -MM-Purchasing -- Conditions
Here you need to assign the Schema determination RM2000 to your Purchasing organization.
Then when you create the STO in the recieiving plant, then you will get the condition tab in the item details of STO, there you can maintain the delivery costs for that material & send the STO to your supplying plant.
Supplying plant will send the material through MB1B & with mvt type 351 to recieving plant.
At the time of Goods reciept system will capture the delivery costs in the recieving plant for that STO.
rgds
gsc

Configuration for FMTB transfer commitment/actual totals to FI

Similar Messages

Maybe you are looking for