Configuration for Queue Prioritization for EOIO Queues

Hi,
Please can anybody help me in configuring the queue prioritization for EOIO Queues.
Regards
Srinivas

hi,
Check these help..
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Thanks,
Vijaya.

Similar Messages

  • Configuration for JMS Adapter Sensor action and JMS Queue sensor action..!!

    Hi,
    Id like my BPEL process to send an XML message to JMS on Websphere,I was able to do this through a JMS adapter.But I would more like to add sensors into my process which would really do the same thing - send an XML message to JMS Q.
    Now I understand that there are two ways to do this,JMS Queue and JMS Adapter - thorugh bpel sensor action.
    I am able to use JMS Queue and it works fine , but adds its own xml tags to the message,Is there any way I could send only my xml payload as a message to the queue??
    Also could any1 tell me what is the configuration for JMS Adapter sensor action?
    Any suggestions how do I go about it??

    Hey Anirudh,
    Thanx for the response :-)
    All these hold good when I have an AQ adaptor right,But the thing is I want to send a message to a 'JMS' queue with out actually using an adapter configuration wizard and everythng..So I resolved to JMS queue Sensor action..Heres the xml snippet from the sensorAction.xml files which is generated..
    <actions targetNamespace="http://xmlns.oracle.com/Test_JMS_Logging" xmlns="http://xmlns.oracle.com/bpel/sensor" xmlns:tns="http://xmlns.oracle.com/Test_JMS_Logging" xmlns:pc="http://xmlns.oracle.com/bpel/sensor">
    <action name="JMS_LogEntry" publishName="" publishType="JMSQueue" enabled="true" filter="" publishTarget="jms/L_Queue">
    <property name="JMSConnectionFactory">jms/L_QueueCF</property>
    <sensorName>ActivitySensor_JMS</sensorName>
    </action>
    </actions>
    This works grt and adds messages to the queue..But adds its own header info according to the sensor.xsd loacted at the Oracle_home\bpel\system\xmllib\ folder.
    Right now the XML message added to the Queue is:-
    <actionData xmlns="http://xmlns.oracle.com/bpel/sensor">
    <header>
    <sensor sensorName="ActivitySensor_JMS" classname="oracle.tip.pc.services.reports.dca.agents.BpelActivitySensorAgent" kind="activity" target="AddLEntr
    y" xmlns:pc="http://xmlns.oracle.com/bpel/sensor" xmlns:ns2="http://www.ulrhome.com/2008/10/L_Entry" xmlns:tns="http://xmlns.oracle.com/Test_JMS">
    <activityConfig evalTime="completion">
    <variable outputDataType="string" outputNamespace="http://www.w3.org/2001/XMLSchema" target="$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName"/>
    </activityConfig>
    </sensor>
    <instanceId>950016</instanceId>
    <processName>Test_JMS</processName>
    <processRevision>v2009_04_15__40833</processRevision>
    <domain>default</domain>
    <timestamp>2009-04-15T11:21:23.596-04:00</timestamp>
    <midTierInstance>app01.ulrhome.com:9700</midTierInstance>
    </header>
    <payload>
    <activityData>
    <activityType>scope</activityType>
    <evalPoint>completion</evalPoint>
    <durationInSeconds>0.011</durationInSeconds>
    <duration>PT0.011S</duration>
    </activityData>
    <variableData>
    <dataType>12</dataType>
    <data>
    <ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
    </data>
    <queryName/>
    <target>$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName</target>
    <updaterName>AddL_Entry</updaterName>
    <updaterType>scope</updaterType>
    </variableData>
    </payload>
    </actionData>
    My requirement is that I need to add a sensor to the BPEL process which posts 'Only my payload message to the JMS queue'..
    What I would want the message in the Queue to be is : -
    <data>
    <ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
    </data>
    Also while creating a Sensor action I get another option as JMS Adaptor,I am not sure of what value to type in this wizard..Heres what I keyed in..M sure this is not right..Cos it dosnt work :-)
    <action name="SensorAction_JMS" publishName="" publishType="JMSAdapter" enabled="true" filter="" publishTarget="jms/LoggingQueue">
    <property name="JMSConnectionName">Log</property>
    </action>
    </actions>
    Could any 1 tel me what values are the right values..And does JMS Adapter mean that I have to create a JMS Apator in the project and give that connection name as a Value..
    I am not finding sufficiant Documentation for 'JMS Adapter' so M clueless and right now any help will be appriciated :-)
    Regards,
    Akshatha.

  • How to configure for remote JMS client?

    I have my own Java JMS test program for performance measurements.
              I am using the JNDI and JMS provider functionality of the WebLogic 9.1 app-server but my test program is just pure JMS 1.02 sender/receiver clients - ie it is NOT part of, or deployed as a J2EE application.
              SINGLE MACHINE TEST
              ===================
              In a single machine environment I was able to
              - configure a JMSServer
              - configure a JMSSystemModule
              - configure resources for ConnectionFactories and Queue and Topics
              I then made what I believe to be a 'standalone' application module copied from some mysystemmodule-jms.xml and with that I somehow worked out how to deploy it using the weblogic.Deployer tool.
              The deployment apparently set up the JNDI and my JMS client could gain access to the administered objects and do what it does.
              Everything works.
              TWO MACHINE TEST
              ================
              I now have a second machine.
              I want to put my JMS sender client on this new machine and I want the JMS server and JMS receiver client to be unchanged from the SINGLE MACHINE TEST.
              But I really don't know quite how to proceed from here...
              Do I need to install the WebLogic app-server on the sender machine or is the weblogic.jar all I need?
              What is necessary configuration for JNDI access on the sender machine?
              Can I in fact use my original SINGLE MACHINE server unchanged as I am hoping?
              I don't think I want a "thin" client because I read that performance is impacted (and these are performance tests)
              Remember this is NOT a J2EE application. There is no MDB; no client-container; no descriptors etc. Maybe that makes it more complicated - I don't know.
              Sorry for such basic questions but if somebody can just point me to an appropriate example or tutorial it could save me days...
              Thankyou.

    Hi,
              My problem is on similar lines. I have an applet based UI working on RMI/t3 protocol.
              I am using weblogic 9.2 as my app server.
              When my applet is executed on JRE 1.5x it works fine.
              But when I use JRE1.4x it gives the following exception
              java.lang.NoClassDefFoundError: javax/management/InvalidAttributeValueException
              at weblogic.rmi.internal.Stub.<clinit>(Stub.java:21)
              at java.lang.Class.forName0(Native Method)
              at java.lang.Class.forName(Class.java:141)
              at weblogic.rmi.internal.StubInfo.class$(StubInfo.java:34)
              at weblogic.rmi.internal.StubInfo.<clinit>(StubInfo.java:34)
              at java.lang.Class.forName0(Native Method)
              I have analyzed the reason for this.
              the class javax/management/InvalidAttributeValueException was included in java 1.5 and above. So JRE 1.4 does not have it.
              In previous versions of weblogic this class was a part of their 'weblogic.jar' file and in weblogic 9.2 it is not a part of weblogic.jar file so when I am using JRE1.4 and weblogic 9.2 then it obviously does not find this class hence the above exception.
              I tried to put this all together and made custom made client jar file incliding the necessary classes. I was able to get throght this exception only land up in following exception.
              java.lang.VerifyError: class weblogic.utils.classloaders.GenericClassLoader overrides final method .
                   at java.lang.ClassLoader.defineClass0(Native Method)
                   at java.lang.ClassLoader.defineClass(Unknown Source)
                   at java.security.SecureClassLoader.defineClass(Unknown Source)
                   at sun.applet.AppletClassLoader.findClass(Unknown Source)
                   at java.lang.ClassLoader.loadClass(Unknown Source)
                   at sun.applet.AppletClassLoader.loadClass(Unknown Source)
                   at java.lang.ClassLoader.loadClass(Unknown Source)
                   at java.lang.ClassLoader.loadClassInternal(Unknown Source)
                   at weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFactoryDelegate.java:204)
                   at weblogic.jndi.spi.EnvironmentManager$DefaultFactoryMaker.<clinit>(EnvironmentManager.java:26)
                   at weblogic.jndi.spi.EnvironmentManager.getInstance(EnvironmentManager.java:48)
                   at weblogic.jndi.Environment.getContext(Environment.java:307)
                   at weblogic.jndi.Environment.getContext(Environment.java:277)
                   at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
                   at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
                   at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
                   at javax.naming.InitialContext.init(Unknown Source)
                   at javax.naming.InitialContext.<init>(Unknown Source)
              I really need to support clients using Jre 1.4 and Jre 1.5
              I will really appreciate any help on this one.
              Please advise.
              Thank you all.

  • How to configure JMS queue on OC4J server. Development in JDeveloper 10G

    Hi there,
    I have to configure a JMS for an Asynchronous process in my Application which will be running in Oracle 10G Application Server. Development Environment is Oracle JDeveloper 10G.
    I am facing a problem on how to configure JMS queue.
    Steps Followed are:
    in the <JDevloperHome>/j2ee/home/config
    1. Made the new queue and connection factory's JMS entry in jms.xml.
    2. Specifed the queue in oc4j-connectors.xml.
    3. played around with application.xml
    and tried all combinations, but the message producer always failed to lookup the queue.
    Need help on the steps to follow so that the producer can post the message in the queue.
    Also please help how to configure the MDB to listen to the queue.
    Thanx and Regards
    Subham

    If you were dealing with Oracle 10g app server as opposed to standalone, I might be better able to help you.
    One thing though, when you are configuring your MDB in the orion-ejb-jar.xml file, do not forget to specify attribute listener-threads, otherwise no matter how many beans you have in your MDB pool, only one bean will be listening to the queue. Many listener-threads equal to max number of beans in pool.

  • Sender JMS adapter configuration for IBM MQSeries

    Dear All,
    i am doing a IBM MQSeries 5.2.x Message ->sender JMS adapter -> XI server -> receiver RFC adapter -> R/3.
    i have deployed the JMS adapter with the required jar files of IBM MQSeries 5.2.x in XI server.
    in Sender JMS adapter configuration for IBM MQSeries 5.2.x, i have put following data:
    1. Transport Protocol: Websphere MQ - is it okay?
    in JMS provider settings:
    2. in channel name - what should be there?
    3. Transport Network protocol should be TCP/IP or WebsphereMQ - how to decide this thing.
    4. JMS Complaint - whether WebsphereMQ or JMS API.
    in JMS Settings:
    5. JMS Queue user - is this IBM MQSeries 5.2.x Queue User or someother user?
    6. JMS Message Selector - what data to take here.
    So if anybody has connected IBM MQSeries 5.2.x to XI via JMS adapter, please answer my above queries.
    Regards,
    Rajeev Gupta

    Hi Swaroop,
    you can send me those documents at my gmail-id : [email protected]
    Hi All,
    one more question - to connect XI server to IBM MQSeries via JMS adapter in ID, do we need to have a MQSeries Client installed on XI server - or - just by configuring JMS adapter, we can send messages from IBM MQSeries to XI server without any MQSeries client on XI server?
    Why Channel name is required in JMS configuration data?
    Thanks,
    Rajeev Gupta

  • Error: Invalid configuration for the JMS adapter

    Hi!
    I'm doing a test with CEP to get messages from a JMS WebLogic queue but I'm getting the following error:
    <BEA-2045010> <The application context "Teste" could not be initialized: org.springframework.beans.FatalBeanException: Error in initialization context lifecycle; nested exception is java.lang.IllegalArgumentException: Invalid configuration for the JMS adapter, you must Bean or specify a converter or a type of event.
    Teste.context.xml:
    <?xml version="1.0" encoding="UTF-8"?>
    <beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:osgi="http://www.springframework.org/schema/osgi"
    xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
    xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
    xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans
    http://www.springframework.org/schema/beans/spring-beans.xsd
    http://www.springframework.org/schema/osgi
    http://www.springframework.org/schema/osgi/spring-osgi.xsd
    http://www.bea.com/ns/wlevs/spring
    http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
    http://www.oracle.com/ns/ocep/jdbc
    http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
    http://www.oracle.com/ns/ocep/spatial
    http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
         <wlevs:event-type-repository>
              <wlevs:event-type type-name="Pet">
                   <wlevs:class>testewithprotobuf.MyPet$Pet</wlevs:class>
              </wlevs:event-type>
         </wlevs:event-type-repository>
         <wlevs:adapter id="pet_messageAdapter" provider="jms-inbound">
              <wlevs:listener ref="pet_inputChannel" />
              <wlevs:instance-property name="converterBean"
                   ref="PetMessageConverter" />
         </wlevs:adapter>
         <wlevs:channel id="pet_inputChannel" event-type="Pet">
              <wlevs:listener ref="pet_messageProcessor" />
         </wlevs:channel>
         <bean id="PetMessageConverter" class="testewithprotobuf.PetMessageConverter" />
         <bean id="PetBean" class="testewithprotobuf.PetBean" />
         <wlevs:processor id="pet_messageProcessor">
              <wlevs:listener ref="pet_outputChannel" />          
         </wlevs:processor>
         <wlevs:channel id="pet_outputChannel" event-type="Pet">
              <wlevs:listener ref="PetBean" />
         </wlevs:channel>
    </beans>
    My converter class:
    import java.util.Collections;
    import java.util.List;
    import javax.jms.BytesMessage;
    import javax.jms.JMSException;
    import javax.jms.Message;
    import testewithprotobuf.MyPet.Pet;
    import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
    import com.bea.wlevs.adapters.jms.api.MessageConverterException;
    import com.google.protobuf.InvalidProtocolBufferException;
    public class PetMessageConverter implements InboundMessageConverter {
         @SuppressWarnings("rawtypes")
         @Override
         public List convert(Message message) throws MessageConverterException,
                                                                JMSException {
              BytesMessage bytesMessage = (BytesMessage) message;
              long bodyLen = bytesMessage.getBodyLength();
              byte[] buffer = new byte[(int) bodyLen];
              bytesMessage.readBytes(buffer);
              try {
                   Pet pet = Pet.parseFrom(buffer);               
                   return Collections.singletonList(pet);
              } catch (InvalidProtocolBufferException e) {
                   throw new MessageConverterException(e);
    Please, what's wrong?
    Thanks!

    This error usually indicates that you have both event type and converter bean specified or neither specified. In your case, that doesn't appear to the case from looking at the spring file. Could you also paste the contents of your configuration file from META-INF/wlevs directory?

  • Skipping request for user policy assignments due to agent configuration for authority

    Hello all,
    Symptoms:
    The Configuration Manager only shows the following actions:
    Application Deployment Evaluation Cycle
    Machine Policy Retrieval & Evaluation Cycle
    Software Updates Deployment Evaluation Cycle
    User Policy Retrieval & Evaluation Cycle
    In Software Center there are no applications visible. Also the default 'IT Organization' is shown instead of the 'real' name.
    The Confugration Manager:
    shows in the tab 'General' the correct Management point. Connection type is 'currently intranet' (ok)
    shows in the tab 'Site' the correct site code.
    shows in the tab 'Components' all components as either 'installed' or 'enabled'. Only CCM Notification Agent shows 'Disabled'.
    In SCCM 2012 under 'Client Settings' -> 'Default Settings' -> 'Client Policy' the setting 'Enable User policy on clients' has been enabled.
    Done so far (without success):
    Re-installed the MP
    Run a query on the SCCM Database to check if there are any corrupt records. There are not.
    Installed version 5.00.7958.1000
    CCM Framework: 5.00.7958.1203
    The computer is installed with a task sequence. There is a reboot after 'Setup Windows and ConfigMgr (CM2012 R2 CU1)'.
    Installation command of the SCCM Client (during OSD deployment):
    SMSCACHEFLAGS=PERCENTDISKSPACE SMSCACHESIZE=10 SMSSLP=demo-sccm.demoforest.local SMSMP=demo-sccm.demoforest.local PATCH="%_SMSTSMDataPath%\OSD\TDS00020\KB2938441\configmgr2012ac-r2-kb2938441-i386.msp"
    Content log files on the client:
    PolicyAgent.log:
    Processing PreShutdown event PolicyAgent_RequestAssignments 8/4/2014 11:56:52 PM 2204 (0x089C)
    Processing PostStartup event PolicyAgent_RequestAssignments 8/4/2014 11:57:37 PM 2436 (0x0984)
    Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/4/2014 11:57:37 PM 2436 (0x0984)
    Registered for MP notifications. PolicyAgent_PostStartup 8/4/2014 11:57:37 PM 2436 (0x0984)
    Not rerequesting policy on site code change in provisioning mode. PolicyAgent_ReRequestPolicy 8/5/2014 12:01:55 AM 3212 (0x0C8C)
    Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:02:48 AM 2352 (0x0930)
    Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:02:48 AM 2352 (0x0930)
    Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:02:48 AM 2352 (0x0930)
    Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:11:36 AM 2720 (0x0AA0)
    Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
    Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
    Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:25:02 AM 3164 (0x0C5C)
    Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
    Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
    Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:26:05 AM 2652 (0x0A5C)
    Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
    Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
    Triggered update of user S-1-5-21-1840543543-1948091412-3654635223-1109 settings PolicyAgent_RequestAssignments 8/5/2014 9:00:57 AM 3232 (0x0CA0)
    Requesting User policy assignments for 'S-1-5-21-1840543543-1948091412-3654635223-1109' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
    Requesting User policy from authority 'SMS:TDS' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
    Skipping request for user policy assignments due to agent configuration for authority 'SMS:TDS'. PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
    ClientIDManagerStartup.log:
    [----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:24:34 AM 372 (0x0174)
    Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
    Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
    No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
    SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
    SID unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
    HWID unchanged ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
    GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
     Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
     Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
     HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
     HardwareID2=98130500010000EE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Failed to open to WMI namespace '\\.\root\ccmvdi' (8007045b) ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
    [----- SHUTDOWN -----] ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
    [----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:25:42 AM 2012 (0x07DC)
    Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
    Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
    No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
    SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
    SID unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
    HWID unchanged ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
    GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
     Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
     Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
     HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
     HardwareID2=98C70600010000EE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
    ClientAuth.log:
    Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
    Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
    Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
    Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
    ClientLocation.log:
    Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
    Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
    Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
    1:24:53 AM 2932 (0x0B74)
    Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
    1:24:54 AM 2932 (0x0B74)
    Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:54 AM 2932 (0x0B74)
    Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
    Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
    Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
    1:25:53 AM 2504 (0x09C8)
    Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
    1:25:53 AM 2504 (0x09C8)
    Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Getting Assigned Site ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
    Assigned Site is TDS ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
    Getting Assigned Site ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
    Assigned Site is TDS ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
    execmgr.log (with errors):
    Requesting MTC to delete task with id: {C5DCEE82-C903-4CBD-98CC-534646B3EFD7} execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
    This execution request does not own the corresponding task in MTC, returning without deleting it from MTC. execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
    Service startup. execmgr 4/22/2014 7:16:09 PM 2332 (0x091C)
    Service startup. execmgr 4/22/2014 9:17:36 PM 2216 (0x08A8)
    Service startup. execmgr 4/22/2014 9:23:02 PM 2348 (0x092C)
    Service startup. execmgr 4/22/2014 9:24:53 PM 1000 (0x03E8)
    Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
    If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 3224 (0x0C98)
    Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
    If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 1292 (0x050C)
    Service startup. execmgr 8/4/2014 11:57:32 PM 3696 (0x0E70)
    Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
    If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:57:33 PM 3696 (0x0E70)
    Software distribution agent was enabled execmgr 8/5/2014 12:01:55 AM 3448 (0x0D78)
    Service startup. execmgr 8/5/2014 12:02:44 AM 2272 (0x08E0)
    ExecMgr::GetTaskState - GetTaskState Failed with error code 0x87d00317 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
    Policy arrived for child program Install execmgr 8/5/2014 12:03:02 AM 1648 (0x0670)
    Creating mandatory request for advert TDS20014, program Install, package TDS00014 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
    An existing MTC token was supplied, this execution request is not owner of MTC object. execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
    CertificateMaintanance.log:
    HTTP is selected for Client. The current state is 0. CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
    Raising pending event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     DateTime = "20140422164904.539000+000";
     HRESULT = "0x00000001";
     ProcessID = 3320;
     ThreadID = 604;
     CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
    Raising event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     ClientID = "GUID:7ff40832-4c01-456f-9705-096da67985b3";
     DateTime = "20140422164946.336000+000";
     HRESULT = "0x00000001";
     ProcessID = 3320;
     ThreadID = 3216;
     CertificateMaintenance 4/22/2014 6:49:46 PM 3216 (0x0C90)
    HTTP is selected for Client. The current state is 0. CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
    Raising pending event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     DateTime = "20140804215639.612000+000";
     HRESULT = "0x00000001";
     ProcessID = 2144;
     ThreadID = 2212;
     CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
    Raising event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804215651.440000+000";
     HRESULT = "0x00000001";
     ProcessID = 2144;
     ThreadID = 3348;
     CertificateMaintenance 8/4/2014 11:56:51 PM 3348 (0x0D14)
    Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/4/2014 11:56:56 PM 1096 (0x0448)
    Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:02:33 AM 1656 (0x0678)
    Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:11:17 AM 384 (0x0180)
    Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:24:34 AM 372 (0x0174)
    Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:25:42 AM 2012 (0x07DC)
    smscliui.log:
    Perform Action: Request & Evaluate User Policy - {3A88A2F3-0C39-45fa-8959-81F21BF500CE}. Message sent, id={FC736B58-2635-45B8-8002-E7C8D6CCEB8D} smscliui 8/5/2014 9:02:34 AM 2484 (0x09B4)
    Current Assigned Site: TDS smscliui 8/5/2014 9:02:38 AM 868 (0x0364)
    Currently assigned FQDN:  smscliui 8/5/2014 9:02:41 AM 868 (0x0364)
    Failed to set DNSSuffix value to the registry. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
    SMS Site code has not been changed. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
    Current Assigned Site: TDS smscliui 8/5/2014 1:19:20 PM 2160 (0x0870)
    CcmMessaging.log:
    Queue 'StateMessageManager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'StateMessageManager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'CTMDTSReply'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'CTMDTSReply' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'CTMDTSReply'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'execmgr'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'execmgr' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'execmgr'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'PolicyAgent_RequestAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'PolicyAgent_RequestAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'PolicyAgent_RequestAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'ClientRegistration'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'ClientRegistration' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'ClientRegistration'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'EndpointProtectionAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'EndpointProtectionAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'EndpointProtectionAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'LS_ScheduledCleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'LS_ScheduledCleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'LS_ScheduledCleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'PolicyAgent_Cleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'PolicyAgent_Cleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'PolicyAgent_Cleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'DCMAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'DCMAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'DCMAgent'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'CertEnrollAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'CertEnrollAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'CertEnrollAgent'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'ExternalEventAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'ExternalEventAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'ExternalEventAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'UpdateStore'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'UpdateStore' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'UpdateStore'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'PolicyAgent_ReplyAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'PolicyAgent_ReplyAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'PolicyAgent_ReplyAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'SMSSHA'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'SMSSHA' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'SMSSHA'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'lmp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'lmp_[http]mp_locationmanager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'lmp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'mp_statusreceiver'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'mp_statusreceiver' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'mp_statusreceiver'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'mp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'mp_[http]mp_locationmanager' initialized with 1 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'mp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232553.423000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2504;
     CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232553.485000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2504;
     CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232553.563000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2504;
     CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232553.657000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2504;
     CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232606.048000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2508;
     CcmMessaging 8/5/2014 1:26:06 AM 2508 (0x09CC)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232606.110000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2188;
     CcmMessaging 8/5/2014 1:26:06 AM 2188 (0x088C)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232606.188000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2504;
     CcmMessaging 8/5/2014 1:26:06 AM 2504 (0x09C8)
    CcmNotificationAgent.log:
    Bgb client agent is starting... BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
    Bgb client agent is disabled BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
    TCP Listener is disabled. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
    BgbController main thread is started with settings: {bgb enable = 0}, {tcp enabled = 0}, {tcp port = 0} and {http enabled = 0}. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
    Wait 3600 seconds for event notification. BgbAgent 8/5/2014 1:26:05 AM 3076 (0x0C04)
    Wait 3600 seconds for event notification. BgbAgent 8/5/2014 2:26:05 AM 3076 (0x0C04)
    Any help is appreciated and with kind regards,
    Willem-Jan

    Hello all,
    I modified the TS, but the problem is still there.
    smsts.log:
    ==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
    Executing task sequence OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
    Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
    Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
    Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
    Debug shell is enabled OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Successfully enabled debug command shell support. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Configuring local administrator account OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Re-assign all drive letters... OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Could not open drive Q:\ (80070005) OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Ignoring inaccessible volume 'Q:' with error 0x80070005 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    No partition needs to be udpated. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Installing SMS client OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Client already installed. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Moving logs to SMS client directory OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Successfully moved logs to SMS client log directory: C:\Windows\CCM\Logs\SMSTSLog OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Executing task sequence manager bootstrap OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Executing command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    ==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Current OS version is 6.1.7601.1 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Logging successfully initialized. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Resuming Task Sequence in Full OS TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    We are going in GINA and potentially need to set the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    setting the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Executing command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    ==========[ TsProgressUI started in process 2196 ]========== TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    Command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    Registering COM classes TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    sbModulePath = C:\Windows\CCM\TsProgressUI.exe TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    Unregistering class objects TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    Shutdown complete. TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    Process completed with exit code 0 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Successfully registered TS Progress UI. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Found network adapter "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)" with IP Address 5.5.5.101. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Starting Task Sequence Manager. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    executing TS Manager not in full media TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    executing TS Manager in c:\windows\ccm TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Executing command line: "TsManager.exe" TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Successfully intialized Logging for TS Manager. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Commandline: "TsManager.exe" TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    /service parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    /standalone parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    /noclient parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Successfully registered Task Sequencing COM Interface. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Executing as a standalone exe TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Initializing TS Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Opening Task Sequencing Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    NOT executing in WinPE TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling Config policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling config policies... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling SysHealthConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 684, uncompressed size 4652. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling SoftUpdConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 1922, uncompressed size 19242. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling SoftDistClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 1327, uncompressed size 13740. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling NAAConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 1022, uncompressed size 6494. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling RebootSettingsConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 433, uncompressed size 1556. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling AppManClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 982, uncompressed size 6358. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Get Install Directory for SMS Client TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 435 TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3}") AND (PolicyState
    = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:TDS") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
    4:51:50 PM 2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
    4:51:51 PM 2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 9 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 11943 TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
    4:51:57 PM 2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
    Total RequestedConfig policy instance(s) : 12387 TSManager 8/5/2014 4:52:00 PM 2244 (0x08C4)
    New/Changed ActualConfig policy instance(s) : 0 TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Policy evaluation initiated TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"'  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"'  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine'
    The Powershell command as described by NPerson give the output:
    C:\Windows\system32>powershell Invoke-WmiMethod -Namespace root\CCM -Class SMS_C
    lient -Name SetClientProvisioningMode -ArgumentList $false
    __GENUS          : 1
    __CLASS          : __PARAMETERS
    __SUPERCLASS     :
    __DYNASTY        : __PARAMETERS
    __RELPATH        : __PARAMETERS
    __PROPERTY_COUNT : 1
    __DERIVATION     : {}
    __SERVER         : DEMO-CAPTURE
    __NAMESPACE      : ROOT\ccm
    __PATH           :
    \\DEMO-CAPTURE\ROOT\ccm:__PARAMETERS
    ReturnValue      :
    PSComputerName   : DEMO-CAPTURE
    It is about the PSComputerName: that is the name of the machine on which the capture was made. So I suppose the problem is already in the image. Is my statement correct or is it not relevant?
    With kind regards,
    Willem-Jan

  • ALE configuration for Outbound Idoc - Help me

    Hi Experts,
    I am newbee in SAP and XI. I was trying to send MATMAS Idoc from R3 and i was running into some issues. So i would appreciate if someone can help me.
    I am using following link as reference. /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    I did all the steps mentioned in the above link ( Creating Logical Systems, Assigning Client and RFC destnations, Creating distribution models ..... etc)
    and then everything went well and i saw success messags in all the steps.
    I used BD10 to send material and it went well. But when i check TRFC queue, i see some error messages; "<i><b>No service for system SAPRDI, client 800 in Integrion Directory</b></i>"
    And all the messages are hanging in the TRFC queue.
    Note: I havent configured anything in XI yet. I wanted to make sure IDoc gets to XI client first.
    Thank you in advance. Pls help me its very urgent.
    Thanks,
    Surya

    I created RFC destination (SM59) and Port (IDX1)
    Then i sent another material (BD10)  and checked tRFC queue. i found bunch of error in the Queue.
    <b>1.connection to host 10.4.23.120, service sapgw00 timed out / CPI-C error C
    No service for system SAPRDI, client 800 in Integration Directory
    partner not reached (host 10.16.176.29, service sapgw00) / CPI-C error CM
    connection to host 10.16.136.127, service sapgw58 timed out / CPI-C error</b>
    Note: i have noticed entries for R3 in SLD as below
                      System Name:  <b>RDI </b>  ( not <b>SAPRDI</b> as mentioned in the error message)
                      System Home:  r3ides
    That might be reason. If so, how to change it in R3 box? Any suggestions?
    Please send me if you guys have any links or docs to address this issue.
    Thanks,
    Surya

  • Issue on configuring WTC queue Bridge

    Hi all,
    Currently I'm trying to configure a Queue Bridge from a JMS queue to a Tuxedo Queue and I'm experiencing some problems.
    The situation right now is the following:
    1- I've sucesfully created the JMS source Queue under the JMS section of my WebLogic.
    2- Created the WTC service, connecting to my Tuxedo Domain.
    3- Created the redirect from the JMS to the Tuxedo Queue.
    4- Created the Queue Bridge.
    The issue right now is, even though my JMS queue is working and have some messages in it, the WTC Queue Bridge fails to initialize with the following error:
    <Error> <WTC> <BEA-180095> <The tBridge could not initialize the JMS sourceName queue.>
    Any idea on why it's not being able to initialize? I've configured my Source Name with the JNDI name of the JMS Queue:
    weblogic.jms.Jms2TuxQueue
    Thanks in advance,
    Brunno Attorre

    Hi Todd,
    Regarding the OTMQ functionality, we were hoping to be capable of using the tpattach, tpdeatach, tpenqplus, tpdeqplus, etc..This mostly due to the fact that, when using a OTMQ, we need touse the non-active queues, temporary queues and other functionalities that are provided by these methods...
    Anyway, I think a solution for this from our side would be to implement a JNI call although, as you`ve stated before, this is not officially suported by the JATMI interface.
    If you see any other solution for these functionalities, I`d be very grateful if you could share them with us.
    Thanks very much!
    Brunno Attorre

  • Optimal configurations for webobjects using Java Monitor

    Can someone please let me know the optimal configurations for webobjects? We need details on the number of instances which can be created per cpu on the application server. Please also provide information on the thread configurations per instance in java monitor.

    I do need the threads to communicate. The fact is that I simplified the thing just to understand better responses from you :). The real problem is more complicated. I have a arbitrary number of threads of two different classes. These threads have to access a shared resource (I used the boolean free). Moreover I have to give precedence to one of these two classes. So, I used to integers to represent two queues. The fact is that only the first thread to be ran reaches the end. The others, I saw, reach the wait() method, but then they stops and the program does not finish.
    I mean that I thought this: the first thread to reach the wait() passes. Then, this first thread starts to use the resource (free becomes false). Every other thread which reach the while(...) stops there (there is the wait()). Then the first process, at a particular time, release the resource (free = true) and communicate this to another thread which was stuck at the wait() instruction (through the notify()). The problem I see is that every thread reach the wait() and stops there. After the first one is finished, no more... The notify() does not give the monitor to another thread (which would find free = true). This is my problem. Do you understand?
    Many thanks for yuor answer anyway.

  • SAP DMS - How to do an external DMS configuration for the existing system ?

    Hi All.
    Greetings.
    Request help and understanding.
    Am new to the world of SAP. And request SOME clarity for understanding of DMS.
    We are wanting to put an external DMS server and wish to configure for the same.
    So that the load on the production SAP R/3 database is reduced.
    We are now wanting to test the same on Dev environment.
    From SDN Link :
    I understand that :
    DMS basically has a content server. which stores documents.
    That can be accessed through Web, SAP R/3 Gui , SAP Portal.
    I have gone thro various links and the following links i have found to be informative and helpful :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
    http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
    http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
    However, would like to know the following because am not getting the clarity :
    1) Is there any supported platform / compatibility guide for DMS ?
    if yes, can someone send me the link?
    2) We have oracle 11g as our for SAP R/3 backend.
    Windows 2003 server 64 bit system.
    When i check the system status on the dev server of sap.
    It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
    After much search on the SMP site,
    we finally discovered and downloaded the DMS software for unicode and / 64 bit.
    Which we saw under the maintenance components separately seen for DMS 7.0
    Now for this DMS content server which we would like to make it external for storage of documents -
    do we need to have a separate database for this purpose as a repository.
    If i run a setup of DMS - will that automatically install any default repository for this or
    will it allow me to choose any other repository for the same ?
    Can anyone advise on this.
    Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
    3) I read some thing like this on some of the SDN links :
    P40 - Integration of DMS
    P62 - R&D Document Manage¬ment and Workflow
    P71 - Document management
    What are they referring to.
    4) We would be accessing these thro web, gui, customised portal.
    This content server configuration is a bit confusing.
    5) Is SNC configuration required to be done for the separate DMS server setup.
    If yes, how to do that ? any configuration link for that please ?
    Can anyone advise on the things to do.
    Steps to do.
    What all are the pre-requisites to check, before we start the set up of DMS.
    Can anyone help me understand this whole thing regarding the DMS installation and configuration.
    Step-wise.. from the start to end.
    Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
    Many thanks for your help in advance.
    Wishing you a happy and relaxed weekend.
    Kind regards
    Indu

    Thanks christoph & pradeep kumar.
    did a few more research and atleast have come to understand that.
    DMS server installation has content server which works only with MAXDB.
    So my understanding is correct.
    And what we see as Easy DMS is a client installation.
    which probably i would look at at a later stage.
    Found this link to be a little more informative :
    http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
    I really wish. That life were to be so easy. To call a consultant and finish it off
    Wishful thinking
    thanks and cheers
    indu

  • How to have Multiple Configurations for a Flex Application

    Hi All,
    I've seen this question asked in various forms multiple times, but never answered: How do you set up a FLEX configuration to have different configurations for development (local), test server, staging server, beta server, and production server? I cannot imagine that Adobe has not accounted for this, something that is very standard in most development teams. Zend Framework has a very elegant solution for this: in the configuration file you define all aspects that can be configured, as well as the various environments (development, staging, beta, live, etc.). Then, in the bootstrap file you specify which environment you want to work in, and you're all set.
    How can something like this be achieved in FLEX?
    Many thanks!
    -Mike

    Maybe my setup is unconventional, I doubt it, though:
    1) SVN repo stores FLEX and PHP codebases in separate projects.
    2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
    3) Developer then publishes Flex app to staging server. -> need to configure FLEX to point to staging PHP code here.
    4) Flex app then gets published to live server. -> need to configure FLEX to point to live PHP code here.
    Now, using ANT, the scenario would look like this:
    1) SVN repo stores FLEX and PHP codebases in separate projects.
    2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
    3) Code is good and developer checks it back into SVN.
    4) ANT extracts latest build from SVN and builds it, then publishes to staging server. -> need to configure FLEX to point to staging PHP code.
    I am using PHPUnderControl as my build server for PHP.
    I am also unclear as to how my goal could be achieved using ANT?
    Thanks!
    Mike

  • ASA 5505 configured for WebVPN connecting to Citrix Web Interface

    ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
    i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface .  The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark  citrix server http:// 172.30.40.5.) i enter the citrix and then for example  i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
    thanks.

    Teymur,
    Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error.  It is possible that it is generating a different error.
    The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1.  Can you confirm the exact version of code you are running on the ASA.
    If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
    Thanks
    -Jay

  • Financial Reporting Studio 11.1.2.1 PDF not Configured for Web Server

    I have installed EPM 11.1.2.1, and HFM, Planning, Essbase, Financial Reporting are all working fine except when I do a report preview in the Workspace an error is received that PDF has not been configured for this Web Server.
    I have uninstalled PDF and Financial Reporting then re-installed them but I am still getting the same error. Also, I when I tried to view report from Workspace in Financial Reporting Studio, I received the following error:
    error number 400 Error Description:Form already displayed; can't show modally. Function: ShowMsg. Module:GblMethods.
    Your help would be gracefully appreciated.

    You should review all installation guides, readmes, and the certification matrix before performing a Hyperion Installation and/or Upgrade.
    Version 9.0 of Ghostscript is not supported, install ghostscript 8.6.3 - 32-bit.
    From the 11.1.2.1 Certification Matrix: "Either: --Adobe Acrobat Distiller Server 8.0 or 6.0 --GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6"     
    From the 11.1.2.1 Installation Guide Page 110: "Ensure that a supported 32-bit version of Ghostscript is installed."
    See http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
    http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf
    Regards,
    John A. Booth
    http://www.metavero.com

  • Want to use an iPod photo configurated for Mac on a PC

    I want to use my old iPod photo (configurated for Mac) on a PC (but do not need to keep my songs and photos). Is this possible? If so, what do I do?
    iMac G5   Mac OS X (10.4.8)   iPod 5th generation 60 GB

    If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. Macs can read Windows drives so you could restore and format the iPod on a PC, this would also mean any future software updates would have to be done on Windows. This will erase your drive so you need to have your songs and photos backed up. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews and has the functionality to let you copy content from the iPod to the PC. Not sure if it does photos but have a look: XPlay 2
    You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

Maybe you are looking for