Configuration for sms
Hi Experts,
I want to send SMS notification in workflows. I am using ECC 6.0 version.
What is the SMS configuration required for the same ?
Please suggest me .
Regards,
Wasim
Please go through the followinglink it may be of help:
http://help.sap.com/saphelp_47x200/helpdata/en/ae/71583ca544eb51e10000000a114084/frameset.htm
Thanks
Arghadip
Similar Messages
-
Can E51 email key be configured for SMS text inste...
can E51 email key be configured for SMS text instead of email?
Like I just want to be able to press the email key to get to sms messages as I use text a lot but never use email on my phone at all.
Thanks,
Andy.
Solved!
Go to Solution.hi andy..
yes you can.. and i'm already doing that in my E51
just go to settings --> personalisation then change it
and please let me know
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo -
Skipping request for user policy assignments due to agent configuration for authority
Hello all,
Symptoms:
The Configuration Manager only shows the following actions:
Application Deployment Evaluation Cycle
Machine Policy Retrieval & Evaluation Cycle
Software Updates Deployment Evaluation Cycle
User Policy Retrieval & Evaluation Cycle
In Software Center there are no applications visible. Also the default 'IT Organization' is shown instead of the 'real' name.
The Confugration Manager:
shows in the tab 'General' the correct Management point. Connection type is 'currently intranet' (ok)
shows in the tab 'Site' the correct site code.
shows in the tab 'Components' all components as either 'installed' or 'enabled'. Only CCM Notification Agent shows 'Disabled'.
In SCCM 2012 under 'Client Settings' -> 'Default Settings' -> 'Client Policy' the setting 'Enable User policy on clients' has been enabled.
Done so far (without success):
Re-installed the MP
Run a query on the SCCM Database to check if there are any corrupt records. There are not.
Installed version 5.00.7958.1000
CCM Framework: 5.00.7958.1203
The computer is installed with a task sequence. There is a reboot after 'Setup Windows and ConfigMgr (CM2012 R2 CU1)'.
Installation command of the SCCM Client (during OSD deployment):
SMSCACHEFLAGS=PERCENTDISKSPACE SMSCACHESIZE=10 SMSSLP=demo-sccm.demoforest.local SMSMP=demo-sccm.demoforest.local PATCH="%_SMSTSMDataPath%\OSD\TDS00020\KB2938441\configmgr2012ac-r2-kb2938441-i386.msp"
Content log files on the client:
PolicyAgent.log:
Processing PreShutdown event PolicyAgent_RequestAssignments 8/4/2014 11:56:52 PM 2204 (0x089C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/4/2014 11:57:37 PM 2436 (0x0984)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/4/2014 11:57:37 PM 2436 (0x0984)
Registered for MP notifications. PolicyAgent_PostStartup 8/4/2014 11:57:37 PM 2436 (0x0984)
Not rerequesting policy on site code change in provisioning mode. PolicyAgent_ReRequestPolicy 8/5/2014 12:01:55 AM 3212 (0x0C8C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:02:48 AM 2352 (0x0930)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:02:48 AM 2352 (0x0930)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:02:48 AM 2352 (0x0930)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Triggered update of user S-1-5-21-1840543543-1948091412-3654635223-1109 settings PolicyAgent_RequestAssignments 8/5/2014 9:00:57 AM 3232 (0x0CA0)
Requesting User policy assignments for 'S-1-5-21-1840543543-1948091412-3654635223-1109' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Requesting User policy from authority 'SMS:TDS' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Skipping request for user policy assignments due to agent configuration for authority 'SMS:TDS'. PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
ClientIDManagerStartup.log:
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:24:34 AM 372 (0x0174)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SID unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98130500010000EE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Failed to open to WMI namespace '\\.\root\ccmvdi' (8007045b) ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- SHUTDOWN -----] ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:25:42 AM 2012 (0x07DC)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SID unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98C70600010000EE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
ClientAuth.log:
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
ClientLocation.log:
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:53 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:54 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:54 AM 2932 (0x0B74)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Getting Assigned Site ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Assigned Site is TDS ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Getting Assigned Site ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
Assigned Site is TDS ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
execmgr.log (with errors):
Requesting MTC to delete task with id: {C5DCEE82-C903-4CBD-98CC-534646B3EFD7} execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
This execution request does not own the corresponding task in MTC, returning without deleting it from MTC. execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
Service startup. execmgr 4/22/2014 7:16:09 PM 2332 (0x091C)
Service startup. execmgr 4/22/2014 9:17:36 PM 2216 (0x08A8)
Service startup. execmgr 4/22/2014 9:23:02 PM 2348 (0x092C)
Service startup. execmgr 4/22/2014 9:24:53 PM 1000 (0x03E8)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 3224 (0x0C98)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 1292 (0x050C)
Service startup. execmgr 8/4/2014 11:57:32 PM 3696 (0x0E70)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:57:33 PM 3696 (0x0E70)
Software distribution agent was enabled execmgr 8/5/2014 12:01:55 AM 3448 (0x0D78)
Service startup. execmgr 8/5/2014 12:02:44 AM 2272 (0x08E0)
ExecMgr::GetTaskState - GetTaskState Failed with error code 0x87d00317 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
Policy arrived for child program Install execmgr 8/5/2014 12:03:02 AM 1648 (0x0670)
Creating mandatory request for advert TDS20014, program Install, package TDS00014 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
An existing MTC token was supplied, this execution request is not owner of MTC object. execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
CertificateMaintanance.log:
HTTP is selected for Client. The current state is 0. CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140422164904.539000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 604;
CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:7ff40832-4c01-456f-9705-096da67985b3";
DateTime = "20140422164946.336000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 3216;
CertificateMaintenance 4/22/2014 6:49:46 PM 3216 (0x0C90)
HTTP is selected for Client. The current state is 0. CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140804215639.612000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 2212;
CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804215651.440000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 3348;
CertificateMaintenance 8/4/2014 11:56:51 PM 3348 (0x0D14)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/4/2014 11:56:56 PM 1096 (0x0448)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:02:33 AM 1656 (0x0678)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:11:17 AM 384 (0x0180)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:24:34 AM 372 (0x0174)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:25:42 AM 2012 (0x07DC)
smscliui.log:
Perform Action: Request & Evaluate User Policy - {3A88A2F3-0C39-45fa-8959-81F21BF500CE}. Message sent, id={FC736B58-2635-45B8-8002-E7C8D6CCEB8D} smscliui 8/5/2014 9:02:34 AM 2484 (0x09B4)
Current Assigned Site: TDS smscliui 8/5/2014 9:02:38 AM 868 (0x0364)
Currently assigned FQDN: smscliui 8/5/2014 9:02:41 AM 868 (0x0364)
Failed to set DNSSuffix value to the registry. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
SMS Site code has not been changed. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
Current Assigned Site: TDS smscliui 8/5/2014 1:19:20 PM 2160 (0x0870)
CcmMessaging.log:
Queue 'StateMessageManager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'StateMessageManager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CTMDTSReply'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CTMDTSReply' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CTMDTSReply'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'execmgr'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'execmgr' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'execmgr'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_RequestAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_RequestAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_RequestAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ClientRegistration'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ClientRegistration' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ClientRegistration'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'EndpointProtectionAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'EndpointProtectionAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'EndpointProtectionAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'LS_ScheduledCleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'LS_ScheduledCleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'LS_ScheduledCleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_Cleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_Cleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_Cleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'DCMAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'DCMAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'DCMAgent'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CertEnrollAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CertEnrollAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CertEnrollAgent'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ExternalEventAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ExternalEventAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ExternalEventAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'UpdateStore'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'UpdateStore' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'UpdateStore'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_ReplyAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_ReplyAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_ReplyAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'SMSSHA'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'SMSSHA' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'SMSSHA'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'lmp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'lmp_[http]mp_locationmanager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'lmp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_statusreceiver'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_statusreceiver' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_statusreceiver'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_[http]mp_locationmanager' initialized with 1 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.423000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.485000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.563000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.657000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.048000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2508;
CcmMessaging 8/5/2014 1:26:06 AM 2508 (0x09CC)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.110000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2188;
CcmMessaging 8/5/2014 1:26:06 AM 2188 (0x088C)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.188000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:26:06 AM 2504 (0x09C8)
CcmNotificationAgent.log:
Bgb client agent is starting... BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Bgb client agent is disabled BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
TCP Listener is disabled. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
BgbController main thread is started with settings: {bgb enable = 0}, {tcp enabled = 0}, {tcp port = 0} and {http enabled = 0}. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 1:26:05 AM 3076 (0x0C04)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 2:26:05 AM 3076 (0x0C04)
Any help is appreciated and with kind regards,
Willem-JanHello all,
I modified the TS, but the problem is still there.
smsts.log:
==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Executing task sequence OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Debug shell is enabled OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully enabled debug command shell support. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Configuring local administrator account OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Re-assign all drive letters... OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Could not open drive Q:\ (80070005) OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Ignoring inaccessible volume 'Q:' with error 0x80070005 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
No partition needs to be udpated. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Installing SMS client OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Client already installed. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Moving logs to SMS client directory OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully moved logs to SMS client log directory: C:\Windows\CCM\Logs\SMSTSLog OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing task sequence manager bootstrap OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Current OS version is 6.1.7601.1 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Logging successfully initialized. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Resuming Task Sequence in Full OS TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
We are going in GINA and potentially need to set the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
setting the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
==========[ TsProgressUI started in process 2196 ]========== TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Registering COM classes TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
sbModulePath = C:\Windows\CCM\TsProgressUI.exe TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Unregistering class objects TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Shutdown complete. TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Process completed with exit code 0 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully registered TS Progress UI. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Found network adapter "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)" with IP Address 5.5.5.101. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Starting Task Sequence Manager. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager not in full media TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager in c:\windows\ccm TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "TsManager.exe" TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully intialized Logging for TS Manager. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Commandline: "TsManager.exe" TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/service parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/standalone parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/noclient parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Successfully registered Task Sequencing COM Interface. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Executing as a standalone exe TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Initializing TS Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Opening Task Sequencing Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
NOT executing in WinPE TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling Config policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling config policies... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SysHealthConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 684, uncompressed size 4652. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftUpdConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1922, uncompressed size 19242. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftDistClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1327, uncompressed size 13740. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling NAAConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1022, uncompressed size 6494. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling RebootSettingsConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 433, uncompressed size 1556. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling AppManClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 982, uncompressed size 6358. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Get Install Directory for SMS Client TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 435 TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3}") AND (PolicyState
= "Active") AND (PolicyType = "Machine") TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:TDS") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:50 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:51 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 9 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 11943 TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:57 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Total RequestedConfig policy instance(s) : 12387 TSManager 8/5/2014 4:52:00 PM 2244 (0x08C4)
New/Changed ActualConfig policy instance(s) : 0 TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Policy evaluation initiated TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine'
The Powershell command as described by NPerson give the output:
C:\Windows\system32>powershell Invoke-WmiMethod -Namespace root\CCM -Class SMS_C
lient -Name SetClientProvisioningMode -ArgumentList $false
__GENUS : 1
__CLASS : __PARAMETERS
__SUPERCLASS :
__DYNASTY : __PARAMETERS
__RELPATH : __PARAMETERS
__PROPERTY_COUNT : 1
__DERIVATION : {}
__SERVER : DEMO-CAPTURE
__NAMESPACE : ROOT\ccm
__PATH :
\\DEMO-CAPTURE\ROOT\ccm:__PARAMETERS
ReturnValue :
PSComputerName : DEMO-CAPTURE
It is about the PSComputerName: that is the name of the machine on which the capture was made. So I suppose the problem is already in the image. Is my statement correct or is it not relevant?
With kind regards,
Willem-Jan -
Error configuration HTTP / SMS
Hi, I problem configuration HTTP for SMS (SCOT) after the step by step configuration, not send SMS
Show error:
No delivery to BAL:04120116292 due to problem with communication connection
Message no. XS839
Diagnosis
The message could not be delivered to recipient BAL:04120116292 due to a communication error.
System Response
Processing was completed as normal.
Communication service with errors: HTTP or HTTPS
Parameter or error code used:
CL_HTTP_CLIENT->RECEIVE Error Code: 1
Additional information on the node used (in the system language of the node, if available):
405 ICM_HTTP_INTERNAL_ERROR
Procedure
Check the parameters listed for the service. In particular, note the communication parameters. With HTTP/HTTPS, the problem is probably due to an incorrect URL or incorrect HTTP proxy settings.
The error may, however, be temporary. If a SAPconnect retry has been defined for this node, the error may be removed automatically.
Procedure for System AdministrationHi, show message error, log SMICM:
Thr 5140] Sat Sep 03 09:26:15 2011
Thr 5140] NiICheckPendConnection: connection of hdl 35 to 192.68.0.11:80 still in progress (5000)
Thr 5140] NiIConnect: hdl 35 took local address 0.0.0.0:2879
Thr 5140] NiIConnect: state of hdl 35 NI_CONN_WAIT
Thr 5140] NiHsLGetServName: found port number 00.50/0080 in cache
Thr 5140] NiHsLGetServName: retrying to get service name for '00.50/0080'
**T_hr 5140] **** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 35;192.68.0.11:80) [nibuf.cpp 4611]_*
Thr 5140] NiICloseHandle: called for hdl 35 while waiting for connection
Thr 5140] NiICloseHandle: shutdown and close hdl 35 / sock 11536
Thr 5140] *** WARNING => Connection request from (15/16/0) to host: 192.68.0.11, service: 80 failed (NIECONN_REFUSED)
[icxxconn.c 2321]
Thr 5140] IcmConnConnect(id=5/855692): free MPI request blocks
Thr 5140] MPI<b8a6a>20#7 GetInbuf -1 1ffce8 388 (1) -> 6
Thr 5140] MPI<b8a69>21#4 GetOutbuf -1 17fb28 65536 (0) -> 0709FB88 0
Thr 5140] NiIGetServNo: servicename '8000' = port 1F.40/8000
Thr 5140] MPI<b8a69>21#5 FlushOutbuf l-1 1 1 17fb28 2220 6 -> 0709FB68 0
Thr 5140] IcmConnFreeContext: context 5 released
Thr 5140] IcmServDecrRefCount: ctsi386nt01.ctsnx.com:44300 - serv_ref_count: 1
Thr 5140] IcmWorkerThread: Thread 6: Waiting for event
Thr 4968] Sat Sep 03 09:26:16 2011
Thr 4968] SiSelNSelect: of 1 sockets 0 selected
Edited by: Eli Daniel Ramones on Sep 3, 2011 9:36 AM
Edited by: Eli Daniel Ramones on Sep 3, 2011 9:37 AM
Edited by: Eli Daniel Ramones on Sep 3, 2011 9:37 AM -
Can I get South African number to use it for sms? I need no call but sms only. (I mean incoming sms from SA to me)
I too would like to disable this "feature" as I don't use it, nor want it.
Just yesterday, my Microsoft keyboard malfunctioned and sent a burst of SMS messages through Skype until it drained my account which contained the default $5.00 credit when I signed up. I don't particularly care about the $5.00, but I'm annoyed that by dumb luck the feature sent these messages to my director (various quantities of 1s) and about 45 of them. The only thing that stopped sending the messages was that my account ran out of money. Good thing that it's not configured for auto-recharge. I have another Skype account with money in it and to prevent a similar occurrence in that account, I'm now going to dump the credit by texting myself. In texting myself because my cell phone has unlimited texting it at least will not cost me more money.
Depending on whether or not he has a text messaging plan on his phone this could create a nice little charge.
We need to have the ability to block SMS messages just as we can with our mobile phones. -
Distribution Point Configuration Status - SMS Client - Restart might required
SCCM 2012 was updates to SCCM 2012 R2. After that Management Console display for one of servers in Monitoring section - Distribution Point Configuration Status: SMS Client - Restart might required - In Progress. This DP was restartred but status "In
Progress" stay.
Distribution point works fine but status is confuses me.
How delete this status? Where can I delete dp status from SQL server?Check the database to find any DP with the InsStr2 value is 3010. Here are the steps for your reference. > Make sure you have good backup of the site DB> Run the following select statement to find the Distribution Points in this state:
select * from dbo.DistributionStatus where InsStr2 = '3010'
> Once identified then Delete a record an affected DP with:
delete from dbo.DistributionStatus where ID = <DPID of affected DP identified by above command> -
Hi all,
I wolud like to know the configuration steps need to do in the SCOT transaction inorder to send the mails from SAP system to othermail servers via SMTP.
Your help would be more appreciable
Many thanks in advance
rk.Hi RKK,
e-mail, fax or paging/SMS via SMTP configured in the SAP Web Application Server & Which prerequisites and settings are required outside the SAP system?
Brodly there are five steps to configure
1. Profile parameters
2.User administration (transaction SU01)
3. Client assignment (transaction SICF)
4.SAPconnect administration (transaction SCOT)
5. Settings on the mail server (SAP-external configuration)
For step by step visit smtp configuration guide at
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm.
Cheers,
Shyam. -
SAP DMS - How to do an external DMS configuration for the existing system ?
Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
InduThanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu -
How to have Multiple Configurations for a Flex Application
Hi All,
I've seen this question asked in various forms multiple times, but never answered: How do you set up a FLEX configuration to have different configurations for development (local), test server, staging server, beta server, and production server? I cannot imagine that Adobe has not accounted for this, something that is very standard in most development teams. Zend Framework has a very elegant solution for this: in the configuration file you define all aspects that can be configured, as well as the various environments (development, staging, beta, live, etc.). Then, in the bootstrap file you specify which environment you want to work in, and you're all set.
How can something like this be achieved in FLEX?
Many thanks!
-MikeMaybe my setup is unconventional, I doubt it, though:
1) SVN repo stores FLEX and PHP codebases in separate projects.
2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
3) Developer then publishes Flex app to staging server. -> need to configure FLEX to point to staging PHP code here.
4) Flex app then gets published to live server. -> need to configure FLEX to point to live PHP code here.
Now, using ANT, the scenario would look like this:
1) SVN repo stores FLEX and PHP codebases in separate projects.
2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
3) Code is good and developer checks it back into SVN.
4) ANT extracts latest build from SVN and builds it, then publishes to staging server. -> need to configure FLEX to point to staging PHP code.
I am using PHPUnderControl as my build server for PHP.
I am also unclear as to how my goal could be achieved using ANT?
Thanks!
Mike -
ASA 5505 configured for WebVPN connecting to Citrix Web Interface
ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface . The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark citrix server http:// 172.30.40.5.) i enter the citrix and then for example i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
thanks.Teymur,
Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error. It is possible that it is generating a different error.
The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1. Can you confirm the exact version of code you are running on the ASA.
If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
Thanks
-Jay -
Financial Reporting Studio 11.1.2.1 PDF not Configured for Web Server
I have installed EPM 11.1.2.1, and HFM, Planning, Essbase, Financial Reporting are all working fine except when I do a report preview in the Workspace an error is received that PDF has not been configured for this Web Server.
I have uninstalled PDF and Financial Reporting then re-installed them but I am still getting the same error. Also, I when I tried to view report from Workspace in Financial Reporting Studio, I received the following error:
error number 400 Error Description:Form already displayed; can't show modally. Function: ShowMsg. Module:GblMethods.
Your help would be gracefully appreciated.You should review all installation guides, readmes, and the certification matrix before performing a Hyperion Installation and/or Upgrade.
Version 9.0 of Ghostscript is not supported, install ghostscript 8.6.3 - 32-bit.
From the 11.1.2.1 Certification Matrix: "Either: --Adobe Acrobat Distiller Server 8.0 or 6.0 --GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6"
From the 11.1.2.1 Installation Guide Page 110: "Ensure that a supported 32-bit version of Ghostscript is installed."
See http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf
Regards,
John A. Booth
http://www.metavero.com -
Want to use an iPod photo configurated for Mac on a PC
I want to use my old iPod photo (configurated for Mac) on a PC (but do not need to keep my songs and photos). Is this possible? If so, what do I do?
iMac G5 Mac OS X (10.4.8) iPod 5th generation 60 GBIf your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. Macs can read Windows drives so you could restore and format the iPod on a PC, this would also mean any future software updates would have to be done on Windows. This will erase your drive so you need to have your songs and photos backed up. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews and has the functionality to let you copy content from the iPod to the PC. Not sure if it does photos but have a look: XPlay 2
You can read another user's experience of using XPlay at this link: iPod on Mac and Windows -
SAP IDES ECC 6.0 configuration for ess/mss
Hi,
Iam new to sap . i want to practice various scenarios in ess/mss in my own pc which is installed with ecc 6.0 . what are the configuration to be made in ecc 6.0 for maintaining about 10-20 users for using ess/mss scenarios. i have a knowledge on webdynpro java and little knowledge on ep and using r/3 server. The 10-20 users created should be able to use ess/mss through portal .
So, list the steps configuring for 10-20 users for using ess/mss in ecc ides 6.0 server.
Thanks & regard
prasad<< Do not post the same question across a number of forums >>
-
Is it possible to run TWO parellel configurations for one Object??
SAP Gurus,
We have a strange requirement from the client to have to configurations established in the system for one configuration object.
Without taking much of your time let me paraphrase the requirements.
The client is having two different types of putaway strategies in their current business process. And they toggle between these putaway strategies by reaching out to their production support group and they make configuration changes to have the other put away strategy
One Step Putaway: GR area --> High Rack Storage
Two Step Putaway: GR area --> Interim storage (area at the end of each aisle of high rack storage) --> High Rack
Client wants to have two parallel configurations for both of these put away strategies and needs an ability to switch from one to another. This switching ability should be accessed from SAP screen without any IT intervention (no configuration)
- Switching ability should allow the warehouse manager to change from one step to two step put away strategies without any IT intervention.
- Switching ability should be accessed my SAP Screen (Z-transaction or something with a radio button to toggle around)
Is it possible to have two configuration made for Putaway Strategies and switch them on/off depending on the warehouse needs??
Your invaluable feedback on this will be highly appreciated.
Thanks again folks,
Dhaval
Edited by: Dhaval Joshi on Mar 4, 2008 12:09 PMQ1--I don't believe it is possible. An organization can have multiple licenses tied to its main email address, for example, but then they are assigned to the individual users.
Q2--Yes, you would just need to log out of your account within the CC desktop app prior to logging in on the other account.
If you have any questions, feel free to reach out. -
How can I list all the domains configured for Weblogic Servers?
How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJIf you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.
Maybe you are looking for
-
LSMW Direct input for Material Master
Hi, I need to upload the following views data into SAP using direct input (RMDATIND) Basic Data 1 Basic Data 2 Classification Sales: Sales Org. Data 1 Sales: Sales Org. Data 2 Sales: General/Plant Data Foreign Trade: Export Data Sales Text Purchasing
-
Window RUEKOPF is not defined for form ZWESCHEINV3
Hi Guru, I have encountered an issue whose possible resolution i am not able to meet. The issue is like this : While performing MIGO for the Return Delivery user is successfully getting the maerial document number . But when user trying to perfor /n
-
Volume button don't work . Can they be turned on and off?
-
Does anyone know how to transfer songs from your iPod to your library? They got deleted, and I don't know how to get them back!!! Thanks for your help!!
-
How do you group rows by category in V3.0
hi all, since last update of numbers (V3.0) it does not seem posssible to group rows by categories or I may have missed something. I have browsed online manual, looking for 'category' but nothing matched my request. Does anyone knows how to group row