Configuration Frozen Error after migrating to Weblogic 11g console extensio
We are using the console extension property of weblogic.
The jar used to deploy the same works fine with weblogic9 but gives the below error after migrating to Weblogic 10.3
The project also uses struts-Tiles configuartion. Is there any specific configuration to do after migration with respect to console extension?????
com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:697)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at org.apache.beehive.netui.util.internal.ServletUtils.throwServletException(ServletUtils.java:165)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:582)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1230)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
... 63 more
Caused by: java.lang.IllegalStateException: Configuration is frozen
at org.apache.struts.config.ForwardConfig.setPath(ForwardConfig.java:191)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processForwardConfig(ConsolePageFlowRequestProcessor.java:145)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
... 72 more
After more investigations I have more details:
1. the error does not occur if the base table does not have rowSelection=”single”
2. the error does not occur if the base table has rowSelection=”single” but the popup is raised with showPopupBehavior
3. the error only occurs when the base table has rowSelection=”single” and we call the popup as inline popup (taskFlow with jsf page)
I could not reproduce the error on a newly created application in Jdevelope 11.1.2.1, it only happens to migrated applications.
We can not give up to rowSelection=”single” because of master-detail structures.
Thank you,
Monica
Similar Messages
-
Session expired error after migration 11.1.1.1
We are taking a lots of session expired error after migrating our projects from 11.1.1.1. to the 11.1.1.0
How can we control session parameters in Jdev 11.1.1.1 and Web logic 10.1.3.1 ?
Thanks.Hi,
its still the same setting in the web.xml file. However, I think the expiry you mean is the one raised by the client framework. As far as I remember there is no way to configure itslength. I'll take a not to see what the plans are in this regards. Can you confirm that its not the serve expiry but the message you get from ADF Faces RC?
Frank -
Dump error after migration.
Dear Members,
The driver program for the smartfrom which I have created is throwing a dump error after migration to another server, please suggest me a solution.
Thanks,
Subhendu GoudaHello Subhendu,
Just pass the FM name of your smartfom using a variable like "w_fmodule".
* Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSUBHENDU_TEST',
w_fmodule TYPE rs38l_fnam,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION w_fmodule
EXPORTING
control_parameters = w_cparam
output_options = w_outoptions
IMPORTING
job_output_info = t_otf_from_fm
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope this solves your issue.
Cheers,
Suvendu -
Error while migrating from Weblogic 8.1 to 10.1.3
Hi
I am getting the below error while building the xml during migrating from Weblogic 8.1 to 10.1.3.
Could anyone please suggest how to resolve the below error:
Error:
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/i18n/logging/LogMessage
[java] at weblogic.application.compiler.Appc.runBody(Appc.java:179)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:158)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
[java] at weblogic.application.compiler.Appc.main(Appc.java:188)
[java] at weblogic.appc.main(appc.java:14)
[java] Caused by: java.lang.ClassNotFoundException: weblogic.i18n.logging.LogMessage
[java] at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
[java] at java.security.AccessController.doPrivileged(Native Method)
[java] at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
Regards
Kiran
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
[java] ... 5 moreYou have to make sure the LogMessage class (weblogic/i18n/logging/LogMessage) is in the classpath
Using WebLogic Internationalization utilities: http://download.oracle.com/docs/cd/E17904_01/web.1111/e13704/utilities.htm#i1011073
and an example: http://download.oracle.com/docs/cd/E17904_01/web.1111/e13704/textformatterclasses.htm#g1016464
and: http://download.oracle.com/docs/cd/E17904_01/web.1111/e13704/loggerclasses.htm#g1020871 -
I am currently testing our website with CF11. It is currently working with CF8 however after migrating it to a new server running CF11 I have encountered the following error.
The value returned from the load function is not of type numeric.
The error occurred in
D:/Applications/CFusion/CustomTags/nec/com/objects/address.cfc: line 263
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/contact.cfc: line 331
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 510
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 1675
Called from D:/website/NECPhase2/action.validate.cfm: line 54
261 : <cfif isNumeric(get.idCountry)>
262 : <cfset rc = this.objCountry.setID(get.idCountry)>
263 : <cfset rc = this.objCountry.load()>
264 : </cfif>
265 : <cfset this.sPostcode = get.sPostcode>
Have there been any changes between CF8 and CF11 that could cause this error?
Does anyone have ideas?This is the code in file object file country.cfc (nec.com.objects.country):
<cfcomponent displayname="Country object" hint="This is a Country object, it allows you to access and set values in the Country.">
<!---
// Construct this object
--->
<cfset this.objFunctions = CreateObject( 'component', 'nec.com.system.functions' )>
<cfscript>
this.idCountryID = 0;
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>
<!---
// The following functions are the setters and getters. offering us a better way to get
// at the contents of the object
--->
<!---
// Getters
--->
<cffunction name="getID" displayname="Get ID" returntype="numeric" output="false" hint="This returns the ID of the current item.">
<cfreturn this.idCountryID>
</cffunction>
<cffunction name="getsCountryName" displayname="Get sCountryName" returntype="string" output="false" hint="This gets the sCountryName value of this item.">
<cfreturn this.sCountryName>
</cffunction>
<cffunction name="getsISOCode" displayname="Get sISOCode" returntype="string" output="false" hint="This gets the sISOCode value of this item.">
<cfreturn this.sISOCode>
</cffunction>
<cffunction name="getsDHLCode" displayname="Get sDHLCode" returntype="string" output="false" hint="This gets the sDHLCode value of this item.">
<cfreturn this.sDHLCode>
</cffunction>
<cffunction name="iError" displayname="Get iError" returntype="numeric" output="false" hint="This returns the iError of the current item.">
<cfreturn this.iError>
</cffunction>
<!---
// Setters
--->
<cffunction name="setID" displayname="Set ID" returntype="boolean" output="false" hint="This sets the ID value of this item.">
<cfargument name="idCountryID" required="true" type="numeric" displayname="ID" hint="The ID to use.">
<cfset this.idCountryID = arguments.idCountryID>
<cfreturn true>
</cffunction>
<cffunction name="setsCountryName" displayname="Set sCountryName" returntype="boolean" output="false" hint="This sets the sCountryName value of this item.">
<cfargument name="sCountryName" required="true" type="string" displayname="sCountryName" hint="The sCountryName to use.">
<cfset this.sCountryName = arguments.sCountryName>
<cfreturn true>
</cffunction>
<cffunction name="setsISOCode" displayname="Set sISOCode" returntype="boolean" output="false" hint="This sets the sISOCode value of this item.">
<cfargument name="sISOCode" required="true" type="string" displayname="sISOCode" hint="The sISOCode to use.">
<cfset this.sISOCode = arguments.sISOCode>
<cfreturn true>
</cffunction>
<cffunction name="setsDHLCode" displayname="Set sDHLCode" returntype="boolean" output="false" hint="This sets the sDHLCode value of this item.">
<cfargument name="sDHLCode" required="true" type="string" displayname="sDHLCode" hint="The sDHLCode to use.">
<cfset this.sDHLCode = arguments.sDHLCode>
<cfreturn true>
</cffunction>
<!---
// Clear, to empty out the contents of this object
--->
<cffunction name="clear" displayname="Clear items Details" returntype="boolean" output="false" hint="Clears out all of the items details.">
<cfscript>
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>
<cfreturn true>
</cffunction>
<!---
// The following functions deal with the load, save and deleting of objects
--->
<!---
// Load
--->
<cffunction name="load" displayname="Load items details" returntype="numeric" output="false" hint="This loads in all the information about an item.">
<cfset rc = this.clear()>
<!---
// First of all we need to get the name of the data source we are going to be using
--->
<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>
<!---
// Check to see if it exists
--->
<cftry>
<cfquery name="checkID" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("load: checkID: '#this.idCountryID#' #cfcatch.detail#");
</cfscript>
<cfset this.iErrorID = iErrorID>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif not checkID.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
if(isDefined("session.afr")){
whichOne = "#session.afr.getsAFRNumber()#";
} else {
whichOne = "";
iErrorID = objError.addError("A Country with that id doesn't exists.[#this.idCountryID#][#whichOne#]");
</cfscript>
<cfset this.iErrorID = iErrorID>
<cfreturn iErrorID>
</cfif>
<!---
// If we got past all then then load in the details
--->
<cftry>
<cfquery name="get" datasource="#sDatasource#">
SELECT idCountryID, RTRIM(sCountryName) as sCountryName, RTRIM(sISOCode) as sISOCode, RTRIM(sDHLCode) as sDHLCode
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("load: get: #cfcatch.detail#");
</cfscript>
<cfset this.iErrorID = iErrorID>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfset this.idCountryID = get.idCountryID>
<cfset this.sCountryName = get.sCountryName>
<cfset this.sISOCode = get.sISOCode>
<cfset this.sDHLCode = get.sDHLCode>
<cfset this.iErrorID = "">
<cfreturn true>
</cffunction>
<!---
// Save
--->
<cffunction name="save" displayname="Save items Details" returntype="numeric" output="false" hint="Saves (to some source) the current details for the ID of the item.">
<!---
// First of all we need to get the name of the data source we are going to be using
--->
<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>
<!---
// Now check to see if ithat ID exists
--->
<cftry>
<cfquery name="checkID" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("save: checkID: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<!---
// If it doesn't exist, then add the record, otherwise update the record
--->
<cfif not checkID.recordCount>
<cfreturn this.add()>
<cfelse>
<cfreturn this.update()>
</cfif>
</cffunction>
<!---
// Add
--->
<cffunction name="add" displayname="Add Country" returntype="numeric" output="false" hint="This adds a Country.">
<!---
// Check to see if that a different item isn't already using the same unique details
--->
<cftry>
<cfquery name="checkUnique" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#'
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("add: checkUnique: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif checkUnique.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("A Country with that name or ISO code already exists. idCountryID=#checkUnique.idCountryID#");
</cfscript>
<cfreturn iErrorID>
</cfif>
<cftry>
<cfquery name="add" datasource="#sDatasource#">
SET nocount on
INSERT INTO tblCountry(sCountryName, sISOCode, sDHLCode)
VALUES('#this.objFunctions.scrubText(this.sCountryName)#','#this.objFunctions.scrubText(t his.sISOCode)#','#this.objFunctions.scrubText(this.sDHLCode)#')
SELECT @@identity as autoID
SET nocount off
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("add: add: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfreturn add.autoID>
</cffunction>
<!---
// Update
--->
<cffunction name="update" displayname="Update Country" returntype="numeric" output="false" hint="This updates a Country record.">
<!---
// Check to see if that a different item isn't already using the same unique details
--->
<cftry>
<cfquery name="checkUnique" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE (sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#')
AND idCountryID <> #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("update: checkUnique: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif checkUnique.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("Another Country with that name already exists. idCountryID=#checkUnique.idCountryID#");
</cfscript>
<cfreturn iErrorID>
</cfif>
<!---
// Attempt to update the record to the datasource
// if this fails for any reason then we submit an error message
// to the error component and return the ID of the error
--->
<cftry>
<cfquery name="update" datasource="#sDatasource#">
UPDATE tblCountry
SET sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#',
sISOCode = '#this.objFunctions.scrubText(this.sISOCode)#',
sDHLCode = '#this.objFunctions.scrubText(this.sDHLCode)#'
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("update: update: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
<!---
// Delete
--->
<cffunction name="delete" displayname="Delete Country" returntype="numeric" output="false" hint="This deletes a Country record.">
<!---
// First of all we need to get the name of the data source we are going to be using
--->
<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>
<!---
// Now check to see if ithat ID exists
--->
<cftry>
<cfquery name="checkID" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("delete: checkID: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif not checkID.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("A Country with that id doesn't exists, delete failed.");
</cfscript>
<cfreturn iErrorID>
</cfif>
<!---
// Now check to see if there are any dependancies, if so we can't delete the item
--->
<cftry>
<cfquery name="checkDependancies" datasource="#sDatasource#">
SELECT idCountry
FROM tblAddress
WHERE idCountry = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("delete: checkDependancies: idCountry: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif checkDependancies.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("That Country is being used by an address, delete failed.");
</cfscript>
<cfreturn iErrorID>
</cfif>
<!---
// Now attempt to remove the record.
// if this fails for any reason then we submit an error message
// to the error component and return the ID of the error
--->
<cftry>
<cfquery name="delete" datasource="#sDatasource#">
DELETE FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("delete: delete: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
</cfcomponent> -
Error after upgrading to Weblogic Server 4.5.1
Hi,
We upgraded Weblogic server version 4.0.3 to version 4.5.1 service pack
18. Since after the upgrade, when I try to check the version installed,
I get the error message that T3 admin. is not found. I can't even use
java utils to check my version. I have tried redoing the class path and
shared library path, but nothing works. Can please somebody help me? We
are using Solaris 2.7 operating system and JDK version 1.1.8_12.
Thanks.Hi Robert,
Thanks for the suggestion. I reinstalled 4.5.1 from the CD and everything works. I haven't installed the
service patch 13 yet. My next question from you is: Do I need to make changes to the application to use it
on WLS 4.5.1. This application was written around 4.0.3 and JDK 1.1.6. I have also upgraded the JDK to
version "Solaris_JDK_1.1.7_08a".
Following is the error I receive in the log file:
com.leretanet.common.hi.LoginServlet init parameters:
Loading com/leretanet/common/leretanet.properties
Unable to load properties file 'com/leretanet/common/leretanet.properties'.
File 'com/leretanet/common/leretanet.properties' not found on classpath.
Mon Jan 08 20:48:36 PST 2001:<E> <ServletContext-Servlets> Servlet failed with RuntimeException
Mon Jan 08 20:48:36 PST 2001:<E> <ServletContext-Servlets> java.lang.NullPointerException
Attached is the startup batch script that we are using to start weblogic services.Application classes are
under the /work/weblogic/classes directory. Logically, it should find everything. Application does display
the Login page. It dies after I enter userId and password.
Any input? Since you were so helpful last time, I thought I'll try my luck.
Thanks.
Zahida
Robert Patrick wrote:
It sounds like your installation has been corrupted. I just sent you email with the classes from this
directory -- if this doesn't work, you should probably re-download and re-install...
Hope this helps,
Robert
Zahid aSharief wrote:
Hi Robert,
Thanks for being so helpful. You have helped me more than the BEA tech support. I've been going in
circle with them and not being able to find any answers. Well, the InitialReferenceConstants.class
is part of NT install. I do have an NT development server, when I did the search on that class I
found it in rmi/entention directory. I don't see it in Unix classes. Although, I downloaded the
upgrade from BEA's website, may be I used the wrong download?
Just for testing purpose, I copied that class file from my NT server to the Unix server and when I
did the version check I got the ClassDef error on another Class. I kept copying the class files
that it was not finding on my Unix server from my NT server. I'm down to a file that does not
exist in NT. Here's the error:
java.lang.NoClassDefFoundError: weblogic/rmi/extensions/BasicRemoteObjectReference
at weblogic.rjvm.Kernel.declareProperties(Compiled Code)
at weblogic.rjvm.Kernel.ensureInitialized(Compiled Code)
at weblogic.common.T3Client.<init>(Compiled Code)
at weblogic.common.T3Client.<init>(Compiled Code)
at weblogic.common.T3Client.<init>(Compiled Code)
at weblogic.Admin.connect(Compiled Code)
at weblogic.Admin.main(Compiled Code)
Now what do I do?
Thanks again.
Zahida.
Robert Patrick wrote:
Make sure that your classpath is set properly...
D:\>dir weblogic451\classes\weblogic\rmi\extensions\InitialReferenceConstants.class
Volume in drive D has no label.
Volume Serial Number is 501A-BD5F
Directory of D:\weblogic451\classes\weblogic\rmi\extensions
09/30/99 05:48p 553 InitialReferenceConstants.class
1 File(s) 553 bytes
1,465,065,472 bytes free
D:\>
Zahid aSharief wrote:
Hi Robert,
Thanks for your help. I tried changing the classpath. Now I get the following error message:
java.lang.NoClassDefFoundError: weblogic/rmi/extensions/InitialReferenceConstants
at weblogic.Admin.connect(Compiled Code)
at weblogic.Admin.main(Compiled Code)
What else am I missing?
Thanks again.
Robert Patrick wrote:
WL_HOME=/opt/weblogic; export WL_HOME
CLASSPATH=$WL_HOME/lib/weblogic451sp13.jar:$WL_HOME/classes:$WL_HOME/lib/weblogicaux.jar;
export CLASSPATH
java weblogic.Admin t3://localhost:7001 VERSION
Hope this helps,
Robert
Zahid aSharief wrote:
Hi,
We upgraded Weblogic server version 4.0.3 to version 4.5.1 service pack
18. Since after the upgrade, when I try to check the version installed,
I get the error message that T3 admin. is not found. I can't even use
java utils to check my version. I have tried redoing the class path and
shared library path, but nothing works. Can please somebody help me? We
are using Solaris 2.7 operating system and JDK version 1.1.8_12.
Thanks. -
Excel macro error after deploying in Weblogic
Halo,
I have written excel macros and it is working fine.
but if the same file if i try to open from hyperlink after deploying in Weblogic server , I get the error
"error occured initializing the VBA libraries.
If Microsoft Visual Basic for Applications (VBA) was not installed, or was set to Install on first use,
(advertised, or set to install on demand) you may receive this error message.
Depending on the mode of installation used and the rights of the user to change current settings,
it is possible to install VBA through Control Panel, Add/Remove Programs, Microsoft Office, Add or Remove
features. If Visual Basic for Applications is not listed as an installable feature of Office, the administrator
of your system may have disabled it so it is impossible for you to install it. If VBA is not installed,
it is impossible to run VBA applications/projects on this computer. "
1. Even though Excel VBA application is installed in my machine , why am i getting this error.??
2. I would like to know is there any way to open the excel file even though if the excel software is not installed in client machine??
Appreciate your help.
Thanks.Hi,
I do not see any reason for this to not work.
Is there any difference between the preferences for RX and RXI. Please go to "edit" -> "Preferences" -> "Security(Enhanced)" and uncheck "Enable protected mode at startup".
Are you able to open any pdf from command line with the same command:
"C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" <<PDF_FILE>>
Thanks,
Amish. -
Fault Namespace is empty after migrated to SOA 11g
Details:
Java/EJB WSIF call is not working in Weblogic 11g for fault scenarios. The namespace is empty("") in weblogic 11g but namespace is coming correctly in Oracle OC4J 10g. We also tried the EJB Services instead of WSIF. An EJB services is also not working for fault cases.
OAS10g(OC4J) fault:
<BookDoesNotExistException xmlns="http://oracle.com/service/bookrating/">
<part name="exception">
<exception xmlns="http://oracle.com/service/bookrating/">
<tns:faultstring xmlns:tns="http://oracle.com/service/bookrating/">Book does not exist</tns:faultstring>
<tns:detail xmlns:tns="http://oracle.com/service/bookrating/">com.oracle.rating.BookDoesNotExistException: Book does not exist</tns:detail>
</exception>
</part>
</BookDoesNotExistException>
<bpelFault>
<faultType>
Weblogic 11g fault:
<BookDoesNotExistException xmlns="">
<part name="exception">
<exception xmlns="http://oracle.com/service/bookrating/">
<tns:faultstring xmlns:tns="http://oracle.com/service/bookrating/">Book does not exist</tns:faultstring>
<tns:detail xmlns:tns="http://oracle.com/service/bookrating/">com.oracle.rating.BookDoesNotExistException: Book does not exist</tns:detail>
</exception>
</part>
</BookDoesNotExistException>
</bpelFault>
Thanks,
RameshHi Pablo,
Thanks For the reply.
we are using DB adapter which will poll on table,that means this is the service which creates the bpel instance.
the only prob we are facing is sometimes BPEL instances are never comeout from the RUNNING state and error its showing error as"The transaction was rolled back. The work performed for bpel instance "290086" was rolled back to the previous dehydration point, but the audit trail has been saved.You can recover the instance from the recovery console by resubmitting the callback message or activity for execution"
Oracle suggested this problem occurs when you are using Synchronous processes. increase the timeout settings.
DB adapter Polling is always Asynchronous?
can you just share your thoughts on this..
Regards,
Sudha -
Open role permission error after migration EP6 to EP7
Hi all,
After migration from ep6(WAS 620) to EP7, there are some roles which can't edit permission by content administration.
The error message appears when open edit role permission.
========================= Error Start Line=========================================
ERROR: updateParentData - aclHandle is null for objectID - null
Exception ID:05:29_23/06/08_0006_9615650
EXCEPTION
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.aclEditor
Component class : com.sap.portal.admin.acleditor.ACLEditor
User : Administrator
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NullPointerException
at com.sap.portal.admin.editor.pane.OutPane.calculatePEObjectId(OutPane.java:210)
at com.sap.portal.admin.editor.pane.OutPane.createEditorLayout(OutPane.java:256)
at com.sap.portal.admin.editor.pane.OutPane.setupComponent(OutPane.java:150)
at com.sap.portal.admin.editor.pane.EditorPaneWrapper.mySetupComponent(EditorPaneWrapper.java:143)
at com.sapportals.admin.wizardframework.components.FlowContainer.setupComponent(FlowContainer.java:129)
at com.sapportals.admin.wizardframework.core.TrivialPaneFactory.getComponent(TrivialPaneFactory.java:35)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:229)
at com.sap.portal.admin.editor.Editor.doWizard(Editor.java:605)
at com.sap.portal.admin.editor.Editor.run(Editor.java:150)
at com.sap.portal.admin.editor.AbstractEditorComponent.doContent(AbstractEditorComponent.java:59)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
========================= Error End Line=========================================
Does anyone have idea about this problem ?close
-
Buffer to small ORA-22835 error after migration from 9i to 10g
Hello Oracle-Experts,
I had to calculate hash-values for a corresponding clob-field which worked with oracle 9i (9.0.2.1)
After migration to oracle 10g (10.2.0.1.0) I get an ORA-22835 error (Buffer too small for CLOB to CHAR conversion.
Here is the output for the 10g version:
SQL*Plus: Release 10.2.0.1.0 - Production on Mi Jun 13 16:19:28 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Verbunden mit:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> CREATE TABLE test_conv (value CLOB);
Tabelle wurde erstellt. (Table created.)
SQL> DECLARE vLong LONG:= LPAD('M',4400,'M');
2 BEGIN
3 INSERT INTO test_conv(value) VALUES (vLong);
4 END;
5 /
PL/SQL-Prozedur erfolgreich abgeschlossen. (PL/SQL procedure successfully completed.)
SQL> SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv;
SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv
FEHLER in Zeile 1:
ORA-22835: Puffer zu klein für Konvertierung von CLOB zu CHAR oder BLOB zu RAW
(tatsächlich: 4400, maximal: 4000)
(Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 4400, maximum: 4000))
This is the result with 9i
Verbunden mit:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> CREATE TABLE test_conv (value CLOB);
Tabelle wurde angelegt. (Table created.)
SQL> DECLARE vLong LONG:= LPAD('M',4400,'M');
2 BEGIN
3 INSERT INTO test_conv(value) VALUES (vLong);
4 END;
5 /
PL/SQL-Prozedur wurde erfolgreich abgeschlossen. (PL/SQL procedure successfully completed.)
SQL> SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv;
DBMS_UTILITY.GET_HASH_VALUE(VALUE,1,POWER(2,30))
478332438
Any help is appreciated.
Best Regards
MatthiasYou have hit a bug, 3984527 - CLOB LARGER THAN 4000 INSERTED INTO VARCHAR2(4000) COLUMN IS.
You may want to check this metalink note: Note:388512.1 for further explanation and workarouds.
From the error message manual, Verbatim:
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: string, maximum: string)
Cause: An attempt was made to convert CLOB to CHAR or BLOB to RAW, where the LOB size was bigger than the buffer limit for CHAR and RAW types. Note that widths are reported in characters if character length semantics are in effect for the column, otherwise widths are reported in bytes.
Action: Do one of the following:
1. Make the LOB smaller before performing the conversion, for example, by using SUBSTR on CLOB
2. Use DBMS_LOB.SUBSTR to convert CLOB to CHAR or BLOB to RAW.
~ Madrid. -
Hello Everyone,
I am new to this forum and Weblogic. I am in the process of migrating a big application from Weblogic 8.1 to Weblogic 11g. I am facing a issue with JDBC Commit. I am getting following exception while trying to commit
####<Feb 18, 2010 1:11:51 PM EST> <Debug> <JTAPropagate> <PPXP2CE951B506> <AdminServer> <ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'> <<WLS Kernel>> <> <3de6adeed2d219bd:-1c9bd9a6:126e245ecb6:-7fff-0000000000000010> <1266516711438> <BEA-000000> <java.lang.Exception: DEBUG: receiveRequest, tx=Xid=BEA1-0000957A69A07E5F133C(16499456),Status=Active,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds left=300,XAServerResourceInfo[demoPool_cashlinkdomain]=(ServerResourceInfo[demoPool_cashlinkdomain]=(state=ended,assigned=none),xar=demoPool,re-Registered = false),SCInfo[cashlinkdomain+AdminServer]=(state=active),properties=({}),local properties=({weblogic.jdbc.jta.demoPool=[autoCommit=false,enabled=true,isXA=true,isJTS=false,vendorID=0,connUsed=true,doInit=false,'null',destroyed=false,poolname=demoPool,appname=null,moduleName=null,connectTime=187,dirtyIsolationLevel=false,initialIsolationLevel=2,infected=false,lastSuccessfulConnectionUse=1266516711423,secondsToTrustAnIdlePoolConnection=10,currentUser=java.lang.Exception
at weblogic.jdbc.common.internal.ConnectionEnv.setup(ConnectionEnv.java:310)
at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:344)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:433)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:316)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:93)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:61)
at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:1584)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1357)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:438)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:395)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
at com.mycompany.res.services.util.DatabaseHelper.getConnection(DatabaseHelper.java:109)
at com.mycompany.res.services.util.DatabaseHelper.getConnection(DatabaseHelper.java:46)
at com.mycompany.res.services.security.ejb.LoginManagerEJB.login(LoginManagerEJB.java:64)
at com.mycompany.res.services.security.ejb.LoginManagerEJB_z7om1c_EOImpl.login(LoginManagerEJB_z7om1c_EOImpl.java:573)
at com.mycompany.res.services.security.ejb.LoginManagerEJB_z7om1c_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
,currentThread=Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads],lastUser=null,currentError=null,currentErrorTimestamp=null,JDBC4Runtime=true,supportStatementPoolable=true,needRestoreClientInfo=false,defaultClientInfo={},supportIsValid=true]}),CoordinatorURL=AdminServer+10.240.15.248:7001+cashlinkdomain+t3+)
at weblogic.transaction.internal.TxDebug.debugStack(TxDebug.java:60)
at weblogic.transaction.internal.TransactionManagerImpl.receiveRequest(TransactionManagerImpl.java:1366)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:287)
at weblogic.rmi.cluster.ClusterableServerRef.dispatch(ClusterableServerRef.java:242)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:1138)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:1020)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:240)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:882)
at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:453)
at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:322)
at weblogic.socket.BaseAbstractMuxableSocket.dispatch(BaseAbstractMuxableSocket.java:298)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
>
What is going wrong with this?You'll probably get a better response on the WebLogic server forum WebLogic Server - Upgrade / Install / Environment / Migration
-
Match Merge error after migrated to OWB 10.1.0.4
My old mappings which were running fine are giving match merge errors after uograded from 10.1.0.2 to 10.1.0.4.
getting following error while deploying into new repository (10.1.0.4).
any suggestions please....
ORA-06550: line 856, column 17:
PLS-00103: Encountered the symbol "=" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null was inserted before "=" to continue.
Thanks
ArvindaI did some more analysis. The error does not occur with new repositories, that are created with the Repos-Wizard after Software was upgraded to 10.2.0.2.
However, it does occur with all repositories that were migrated from 10.2.0.1 to 10.2.0.2, using the upgrade script as described in the patch set's installation notes.
The problem persists, even when the profiling user (i.e. schema) is removed, and a new one is initialised by the Design Client. -
Error after migrating new copy control routine
Hi,
I have created a new copy control routine in dev environment. It works fine there. When we migrated the transport to all QA environments getting dumps that the form is missing. I checked the routine and form in VOFM and it does exists. Am I missing a step here or need to do something after migration?
-Minhaj.go to se38 enter program name RV80HGEN - execute.
You need to generate newly created routines
You have to do this in each client where you transport this.
Edited by: Sampath Kumar on Nov 5, 2009 10:36 AM -
Assertion failure error after migration to 11g (11.1.1.5)
Hi All,
I am facing an issue here after we migrated from 10g to 11g (11.1.1.5). Few reports shows following error.
Error Codes: OAMP2OPY:ACIOA5LN
Assertion failure: isXsiTypeSqlExpression(rExpr) at line 67 of /scratch/aime1/adestore/views/aime1_dadvfa0112/bifndn/analytics_web/main/project/webreport/exprformulautils.cpp
Any workaround/fix for this error?
Regards,
RajeshHi Rajesh,
We had the exact same issue occur in 11.1.1.5 as well. Our problem was due to the fact that our report was referencing a saved filter, and in that saved filter, we had a line that was a SQL based filter just like Haris mentions in this thread. We could not get a saved filter with an SQL filter line to work (even creating it from scratch), so I believe this is an 11.1.1.5 bug.
We got around the problem by applying the contents of the saved filter, instead of the filter reference itself. Once we did that, the SQL filter line worked just fine.
Please let me know if this works for you.
Thanks,
Jeremy
Here's the first thread I posted this to:
Re: Drill not working after miagrating (from 10g to 11.1.1.5 ) -
Hi ,
I have recently migeated from 10g to 11.2.0.2 enterprise edition
and i m getting ora error in my alert log file as below :
Mon Jan 28 22:01:02 2013
DBMS_STATS: GATHER_STATS_JOB encountered errors. Check the trace file.
ORA-20011: Approximate NDV failed: ORA-06564: object EXT_TAB_DIR does not exist
Can anyone help me ???SQL> select * from dba_objects where object_name = 'EXT_TAB_DIR';
no rows selected
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Maybe you are looking for
-
Lexicographic image processing
I want to process the array of an image lexicographically (meaning reading as you write, so from left to right). Normal arithmatic functions (division, multiplication etcetera) multiply the entire array, but I want to push the top-left pixel through
-
I am unable to see ads and access any ad campaign in firefox but can in IE
Since updating to the latest version, i no longer see ads in Fb. I am also unable to access the individual ad page. However when I go into IE I am able to see all of this.
-
In quotation Req delivery date
In quotation Req delivery date coming today is default. Earlier it was mandatory vov8 I put tick mark. Then system taking today default. My client does not that like that. He is asking no default date and it should option entire. If they need they wi
-
No depreciation areas have been defined for asset
Dear consultant, By mistake from our user had deactivated Depreciation Area in T-code AS92 for Auc asset 1200005 please suggest How can we activate Deprecation area ? Because We already settled 350 line item in same asset and still 150 item we have
-
Saving xlsx files in Yosemite Numbers
New to MAC. Running a MacBook Pro with Yosemite 10.10.2 and numbers 3.5.2 When I create a spreadsheet in numbers or bring one over from my PC I export it to an Exel document. (all is good so far) I have an xlsx copy of my spreadsheet. When I edit it