Configuration Help - Sun Java Directory 5.2 and Active Directory Sync

Don't know what I am skipping... but I get stuck with no Domain Controllers showing up in the pick list, when configuring an Active Directory Resource.
I am using DS 5.2.P4 on Windows 2003 Sp1 server, along with Indentity synchronization for windows (ISW) 1 2004Q3 SP1.
I have the installtion manaul and can not get past step 6 of creating an Active Directory Source, becuase no Domain Conroller show up in the pick list, nor can I specify one. I have verified that one of the Domain Controllers is configured as Single Master Operations Role in the AD.
Any help on this matter would be greatly appreciated.
Thanks,

nebiyou1 wrote:
1. Is Messaging Server 5.2 compatible with Sun Java Directory Server 6.3?This is obviously not a tested (or supported) combination. That being said I'm not aware of any particular issues with MS5.2 and DS6.3.
If Yes, any documents on how to migrate Messaging Server from pointing to Directory Server 5.2 to 6.3?No.
2. Can Messaging Server 5.2 p 2 run on Solaris 10?Yes. However you need to upgrade to 5.2hf2.18 (last hotfix released) to address known Solaris 10 issues e.g.
5108758 Dispatcher incorrectly determines Solaris 10 version
You can get a copy of iMS5.2hf2.18 from Sun support.
Regards,
Shane.

Similar Messages

Sun 7210 Storage System - SFTP and Active Directory

Good Afternoon
I have recently acquired a Sun 7210 Storage System which I have joined to my Microsoft Windows Active Directory domain. I have also specified the required LDAP Directory Service details under the Configuration tab. I am fairly sure these are correct as I can add a Directory user to the Users part of the device.
What I am having problems with is having my Windows A/D users connect to their shares via either HTTPS or SFTP. They are able to use the shares fine with CIFS and/or NFS.
The only user that can connect with SFTP and HTTPS it the local "root" user on the appliance.
Do people know if Directory users are able to use SFTP and HTTPS to access shares?
My current O/S on the 7210 is 2009.04.10.1.1,1-1.9.
Thanks in advance for any advice/help.
regards
Stephen Meatheringham
College of Asia & the Pacific
Australian National University
E: [email protected]

Stephen,
I ran into this same issue yesterday with SFTP. Unfortunately the answer is that the storage system does not authenticate to AD for local logins (for which FTP, SFTP, HTTP qualify). I placed a support call yesterday to Sun on this matter and was given this information as well as the fact that there are no current plans to do so.
You have taken the functionality one step further by "tricking" the system into using AD as LDAP. I'm not sure it's truly compatible, but that was my next step as well. I was also going to experiment with creative id maps to see if I could make it work. Unfortunately, I've found that if you take the system too far from it's designed use, strange things can happen. I'm not sure that is a chance I want to take with home directories or other "secure" information.
Let me know how you fare and I'll do likewise.
Eric

Sun java directory server and Active Directory

We are using two different directory servers Sun java directory server and active directory.
My question is how we can have password synchronization between these two directory servers.
I have checked Sun Java[TM] System Identity Synchronization for Windows 1 2004Q3
http://www.sun.com/download/products.xml?id=41537425
It seems that it's supported platforms is only for solaris and windows , but I have installed my Sun java directory server on linux and obviously it doesn't work for me.
I would be grateful if anyone can suggest a solution to work around this situation.
I have checked identity manager , I would like to know that if I can do this using this product.
http://www.sun.com/software/products/identity_mgr/specs.jsp
--regards.
Sara

Yes RHEL 4 is a supported OS with DSEE 6.0.
Identity Synchronization for Windows is a part of DSEE that allows synchronization of users, passwords and groups between Sun Directory Server and Active Directory bi-directionally without altering the users environments, ie it does not require that users change their current habits.
Identity Manager is a complete identity management solution that is targetting enterprise work flow when it comes to user provisioning and de-provisioning, but also allows to build authentication and password change forms that will provision the passwords to many different systems including Sun Directory Server and Active Directory but also IBM mainframes, legacy applications, databases...
If you are implementing a complete identity management solution, then go with Identity Manager. If you need a lightweight and fast solution for just synchronizing users and passwords between Sun DS and MS AD, Identity Synchronization for Windows should be your choice.
Regards,
Ludovic.

Oracle Help for Java 4.2.0 and 4.1.17

Attention to all: Oracle Help for Java 4.2.0 and 4.1.17 are now available for download at
http://otn.oracle.com/software/tech/java/help/content.html
OHJ 4.2.0 features a new Ice Browser and enhancements related to the known modal dialog problem. It requires JDK 1.3 and is a recommended upgrade for all clients using JDK 1.3 or higher.

4.1.17 appears to work correctly with RoboHelp.
4.2 gives an error when attempting to generate fts.idx via RoboHelp.

Looking for successful auth debug between cisco 1113 acs 4.2 and Active Directory

Hello,
Does anyone have a successful authentication debug using cisco 1113 acs 4.2 and Active Directory? I'm not having success in setting this up and would like to see what a successful authentication debug looks. Below is my current situation:
Oct 6 13:52:23: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:23: TPLUS: processing authentication start request id 444
Oct 6 13:52:23: TPLUS: Authentication start packet created for 444()
Oct 6 13:52:23: TPLUS: Using server 110.34.5.143
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT: socket event 2
Oct 6 13:52:23: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
Oct 6 13:52:23: T+: session_id 763084134 (0x2D7BBD66), dlen 26 (0x1A)
Oct 6 13:52:23: T+: type:AUTHEN/START, priv_lvl:15 action:LOGIN ascii
Oct 6 13:52:23: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:12 (0xC) data_len:0
Oct 6 13:52:23: T+: user:
Oct 6 13:52:23: T+: port: tty515
Oct 6 13:52:23: T+: rem_addr: 10.10.10.10
Oct 6 13:52:23: T+: data:
Oct 6 13:52:23: T+: End Packet
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT: wrote entire 38 bytes request
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: Would block while reading
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 16bytes data)
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: read entire 28 bytes response
Oct 6 13:52:23: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
Oct 6 13:52:23: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:23: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:10, data_len:0
Oct 6 13:52:23: T+: msg: Username:
Oct 6 13:52:23: T+: data:
Oct 6 13:52:23: T+: End Packet
Oct 6 13:52:23: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:23: TPLUS: Received authen response status GET_USER (7)
Oct 6 13:52:30: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:30: TPLUS: processing authentication continue request id 444
Oct 6 13:52:30: TPLUS: Authentication continue packet generated for 444
Oct 6 13:52:30: TPLUS(000001BC)/0/WRITE/46130160: Started 5 sec timeout
Oct 6 13:52:30: T+: Version 192 (0xC0), type 1, seq 3, encryption 1
Oct 6 13:52:30: T+: session_id 763084134 (0x2D7BBD66), dlen 15 (0xF)
Oct 6 13:52:30: T+: AUTHEN/CONT msg_len:10 (0xA), data_len:0 (0x0) flags:0x0
Oct 6 13:52:30: T+: User msg: <elided>
Oct 6 13:52:30: T+: User data:
Oct 6 13:52:30: T+: End Packet
Oct 6 13:52:30: TPLUS(000001BC)/0/WRITE: wrote entire 27 bytes request
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 16bytes data)
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: read entire 28 bytes response
Oct 6 13:52:30: T+: Version 192 (0xC0), type 1, seq 4, encryption 1
Oct 6 13:52:30: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:30: T+: AUTHEN/REPLY status:5 flags:0x1 msg_len:10, data_len:0
Oct 6 13:52:30: T+: msg: Password:
Oct 6 13:52:30: T+: data:
Oct 6 13:52:30: T+: End Packet
Oct 6 13:52:30: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:30: TPLUS: Received authen response status GET_PASSWORD (8)
Oct 6 13:52:37: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:37: TPLUS: processing authentication continue request id 444
Oct 6 13:52:37: TPLUS: Authentication continue packet generated for 444
Oct 6 13:52:37: TPLUS(000001BC)/0/WRITE/46130160: Started 5 sec timeout
Oct 6 13:52:37: T+: Version 192 (0xC0), type 1, seq 5, encryption 1
Oct 6 13:52:37: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:37: T+: AUTHEN/CONT msg_len:11 (0xB), data_len:0 (0x0) flags:0x0
Oct 6 13:52:37: T+: User msg: <elided>
Oct 6 13:52:37: T+: User data:
Oct 6 13:52:37: T+: End Packet
Oct 6 13:52:37: TPLUS(000001BC)/0/WRITE: wrote entire 28 bytes request
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 33bytes data)
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: read entire 45 bytes response
Oct 6 13:52:37: T+: Version 192 (0xC0), type 1, seq 6, encryption 1
Oct 6 13:52:37: T+: session_id 763084134 (0x2D7BBD66), dlen 33 (0x21)
Oct 6 13:52:37: T+: AUTHEN/REPLY status:7 flags:0x0 msg_len:27, data_len:0
Oct 6 13:52:37: T+: msg: Error during authentication
Oct 6 13:52:37: T+: data:
Oct 6 13:52:37: T+: End Packet
Oct 6 13:52:37: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:37: TPLUS: Received Authen status error
Oct 6 13:52:37: TPLUS(000001BC)/0/REQ_WAIT/46130160: timed out
Oct 6 13:52:37: TPLUS(000001BC)/0/REQ_WAIT/46130160: No sock_ctx found while handling request timeout
Oct 6 13:52:37: TPLUS: Choosing next server 101.34.5.143
Oct 6 13:52:37: TPLUS(000001BC)/1/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:37: TPLUS(000001BC)/46130160: releasing old socket 0
Oct 6 13:52:37: TPLUS(000001BC)/1/46130160: Processing the reply packet
Oct 6 13:52:49: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:49: TPLUS: processing authentication start request id 444
Oct 6 13:52:49: TPLUS: Authentication start packet created for 444()
Oct 6 13:52:49: TPLUS: Using server 172.24.5.143
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT: socket event 2
Oct 6 13:52:49: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
Oct 6 13:52:49: T+: session_id 1523308383 (0x5ACBD75F), dlen 26 (0x1A)
Oct 6 13:52:49: T+: type:AUTHEN/START, priv_lvl:15 action:LOGIN ascii
Oct 6 13:52:49: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:12 (0xC) data_len:0
Oct 6 13:52:49: T+: user:
Oct 6 13:52:49: T+: port: tty515
Oct 6 13:52:49: T+: rem_addr: 10.10.10.10
Oct 6 13:52:49: T+: data:
Oct 6 13:52:49: T+: End Packet
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT: wrote entire 38 bytes request
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: Would block while reading
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 43bytes data)
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: read entire 55 bytes response
Oct 6 13:52:49: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
Oct 6 13:52:49: T+: session_id 1523308383 (0x5ACBD75F), dlen 43 (0x2B)
Oct 6 13:52:49: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:37, data_len:0
Oct 6 13:52:49: T+: msg: 0x0A User Access Verification 0x0A 0x0A Username:
Oct 6 13:52:49: T+: data:
Oct 6 13:52:49: T+: End Packet
Oct 6 13:52:49: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:49: TPLUS: Received authen response status GET_USER (7)
The 1113 acs failed reports shows:
External DB is not operational
thanks,
james

Hi James,
We get External DB is not operational. Could you confirm if under External Databases > Unknown User Policy, and verify you have the AD/ Windows database at the top?
this error means the external server might not correctly configured on ACS external database section.
Another point is to make sure we have remote agent installed on supported windows server.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289013
Also provide the Auth logs from the server running remote agent, e.g.:-
AUTH 10/25/2007 15:21:31 I 0376 1276 External DB [NTAuthenDLL.dll]:
Attempting Windows authentication for user v-michal
AUTH 10/25/2007 15:21:31 E 0376 1276 External DB [NTAuthenDLL.dll]: Windows
authentication FAILED (error 1783L)
thanks,
Vinay

Mobile Account and Active Directory home folder

We install a XServe server (Mac OS X 10.6.3). We join it to Active Directory for authentification and Open Directory for policy. I read the magic triangle on the web.
I mount a MacBook Pro with Mac OS X 10.6. I join it to AD and after to OD. When I configure an account to be mobile, the home folder configure in AD stop to mount automatically. If the account is not mobile the home folder mount correctly.
Somebody has an idea of waht happen?

Hello, sifeduc, and welcome to the AppleBoards,
This really seems like a Directory Services question and is probably best suited to this board: http://discussions.apple.com/forum.jspa?forumID=1353
That being said are you talking about Portable Home Directories? If so PHDs should be created on the server first and on the client second. If you have a client account you want to sync to the OD you need to delete the client account - *but leave it in place* - create a server account and then use the local account which will then sync to the server. The steps for this are a little more complicated than that but not much.
Good Luck,
=Tod

ECM 10GR3 and Active Directory

Hi all,
Somebody can give me some explanation how Active Directory works on ECM?
My ECM is installed over an Linux machine.
On ECMs Admin Server>Internet Configuration i enabled the option Use Microsoft Security > Active Directory Security
On login page the button Microsoft Login appear.
How can i configurate ECM to work with my AD struture now?
Any material for reading can help.
Best regards
Daniel

aha... Well i needed a few days figuring out how to configure my ecm for an AD.
The thing is.... Your ECM is installed on a linux server so you can't configure the AD as an AD. You will have to add an LDAP provider instead. You also need an extra component witch adds a special class for the provider so you can add the AD as an LDAP. Just look at the topics, you will find one from me about ldap.
edit: here is the topic:Using ldap for user auth.
Message was edited by:
Passero

OID and Active Directory

1 Does Oracle OID integrate with Active Directory to synch data with Active Directory periodically?
2 Marshall data from Active Directory on demand (live link)?
3 Does Oracle Single Sign-on solution work with multiple directories (i.e. OID and AD both being used by Oracle Single Sign-on)
4 Can Oracle Single-Sing-on work with a Desktop login into a Domain (also called NT Authentication or Desktop authentication).

This is what I have to share with you....For further details refer link http://otn.oracle.com/products/oid/index.html and Oracle Internet Directory Administrator's Guide.
1 Does Oracle OID integrate with Active Directory to synch data with Active Directory periodically?
For synchronizing from Microsoft Active Directory to Oracle Internet Directory, you need to track changes in Microsoft Active Directory and configure your Active directory connector giving its URL, user account and password to be used by the Active Directory connector, its DIT info on domain which contain the users/groups. And in the Active Directory synchronization profile you'll have to set the mapping rule.
2 Marshall data from Active Directory on demand (live link)?
Yes, its possible to migrate data between directories. Configure your Active Directory connector and External auth Plug-in. And use the Directory Integration and Provisioning Assistant.
3 Does Oracle Single Sign-on solution work with multiple directories (i.e. OID and AD both being used by Oracle Single Sign-on)
Yes, its possible. When a user tries to log in, the OracleAS Single Sign-On server tries to verify the credentials the user enters against those stored in Oracle Internet Directory. If the user credentials are not there, then the Oracle directory server invokes the Active Directory external authentication plug-in. This plug-in verifies the user credentials in Microsoft Windows. If the verification is successful, then the Oracle directory server notifies the OracleAS Single Sign-On accordingly.
4 Can Oracle Single-Sing-on work with a Desktop login into a Domain (also called NT Authentication or Desktop authentication).
Oracle Application Server Single Sign-On enables native authentication, also called autologin, in a Microsoft Windows environment. Once logged into the Windows desktop, the user automatically has access to Oracle components. OracleAS Single Sign-On automatically logs the user into the Oracle environment using user's Kerberos credentials.

Difference between Windows NT domain registry and Active Directory registry

What are the difference(s) ?

Frank, thanks for your response :)
I want WebSphere Application Server to take advantage of a directory service. There are multiple options available for a directory service.
In my configuration the requirement is to make WebSphere Application server to use Microsoft's Active Directory.
While I was going through (WebSphere) documentation, I see following note.
" With Windows NT domain registry support for Windows 2000 and 2003 domain
controllers, WebSphere Application Server only supports Global groups that are the Security type. It is recommended that you use the Active Directory registry support rather than a Windows NT domain registry if you use Windows 2000 and 2003 domain controllers
because the Active Directory supports all group scopes and types. The Active Directory also supports a nested group that is not support by Windows NT domain registry. The Active Directory is a centralized control registry."
You can find the above note in this link (somewhere after 7th line)
http://www-01.ibm.com/support/knowledgecenter/SSAW57_7.0.0/com.ibm.websphere.nd.multiplatform.doc/info/ae/ae/csec_localos.html?cp=SSAW57_7.0.0%2F3-11-5-1-0-0
Does it mean that they are recommending to use Active Directory over Windows NT (which is an older approach) with windows server 2000 or windows server 2003 because Active directory is
advanced ?
I was under the impression that, Active Directory was started with Microsoft Windows Server 2003 and Windows NT registry was used till Windows 2000 server.
After going through above links,
Windows NT registry in an old method. However, it is compatible with Windows Server 2000 and Windows server 2003 but it is recommended to use Active directory with Windows Serve 2003 as it is more advanced. And the same is recommended in WebSphere documentation
(I am aware that support for Windows Server 2000 is over and only extended support is available for Windows Server 2003 however this is to clear doubt). Is my understanding correct ? And does windows server 2000 also support both i.e we can use either Windows
NT registry or Active directory and similarly, Either of them (Windows NT or Active Directory) could be used with Windows Server 2003 ?
And if I got it correct, Is Windows NT and Active Directory, both directory service offering from Microsoft? While NT being an old method and Active Directory being a new/advanced approach ?

Step by step process to create domain name and active directory in windows 7 64 bit

Step by step process to create domain and active directory in windows 7 64 bit
I work in an organization
I want to create a domain name SBBYDP and make it server for other computers
I want that, all users’ have a personal account while they use any computer from this organization, even they use any computer from this network they use their own account to login to network.
And this may be in Active directory option.
I installed windows 7 professional edition 64 bit
Can any person help me? Step by step process, I always thanks full all of you

Hi,
You must use the Windows Server platform system for the AD service, you can refer the following KB first:
Active Directory
http://technet.microsoft.com/en-us/library/bb742424.aspx
AD DS Deployment Guide
http://technet.microsoft.com/zh-cn/library/cc753963(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

### How to make integration between UCCX and Active Directory##

Hello,
I want to know what is the right procedure to perform a right integration between the UCCX and the Active Directory?
Waiting Yours Reply,,,,
Thanks a lot......

What version?
Assuming a current version (5.0 and higher): there is NO direct integration between CCX and Active Directory. The CCX server must not be joined to a domain.
CCX uses UC Manager End Users for synchronized usernames and passwords. If UC Manager is synchronized with an LDAP source, such as Active Directory, then this will carry forward to CCX. CCX would pass authentication requests to CCX through AXL. UCM would perform the LDAP authentication and inform CCX of the success/failure.

Cucm 9.1.2 and Active Directory(Windows Server 2003 Standart Edition SP2)

Hello!
Can CUCM 9.1.2 support an integration with Active Directory(Windows Server 2003 Standart Edition SP2)? How do I have to write down LDAP Manager Distinguished Name? I can find supporting only Active Directory 2003 in documentations without reference to Operation System.

Yes, it is possible.
Check this how-to if you have any doubts about the process.
http://blog.ipexpert.com/2010/04/28/cucm-and-active-directory-integration/
http://www.markholloway.com/blog/?p=1189

Two factor authentication ACS 5.x against external Radius and Active Directory

On ACS 5.x I'd like to authenticate against two external Directories
Active Directory
Black Shield Token Server (via RADIUS)
I found a description the meets mostly my requirements at
http://blog.pbmit.com/digipass2
Has somebody an Idea how this has to be implemented on Cisco ACS 5.3?
In the identity store swwquence there's no way to implement a compound condition (if user authenticated against Directory 1 AND Directory 2 then success)
Active Directory and Cisco ACS
This solution attempts to solve the limitation described in Solution 1. Instead of letting the Identikey server communicate directly to the AD, we use the Identikey server only to strip the PIN and OTP from the password and loop the authentication request back to the Cisco ACS to utilize its Identity Store Sequence, which can now be set to both Internal Identity Store and AD.

just following up to see if there was a solution to this. I am also interested in setting this type of scenerio out.

Sun Java Web Server 7 and JNDI Jell

Hi all,
I am building a normal Java EE web app (WAR file), and I was originally developing on GlassFish v2.1 and everything was beautiful. Now, I found out our shared server is Sun Java Web Server 7, but the sys admin said everything should run fine as long as I wasn't using JSB's.
I downloaded and installed SJWS7 on my local machine so I could test my application against it, and JPA and SJWS7 are not getting along.
I am trying to bind my persistence.xml to the data source I created on SJWS7.
SJWS7 JDBC Resource: jdbc/pact
persistence.xml:
    <persistence-unit name="pact" transaction-type="RESOURCE_LOCAL">
        <description>PA/Circuit Tracking Development</description>
        <provider>org.hibernate.ejb.HibernatePersistence</provider>
        <non-jta-data-source>java:comp/env/jdbc/pact</non-jta-data-source>
        <properties>
        ....There is nothing in sun-web.xml or web.xml that references this resource (although I tried that too, and no go).
The traceback I get is:
<code>Caused by: javax.naming.NameNotFoundException: PWC4216: Name pact is not bound in this Context
     at org.apache.naming.NamingContext.lookup(NamingContext.java:778)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:148)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:789)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:148)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:789)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:148)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:789)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:161)
     at org.apache.naming.SelectorContext.lookup(SelectorContext.java:147)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at org.hibernate.connection.DatasourceConnectionProvider.configure(DatasourceConnectionProvider.java:52)
     ... 151 moreI've been trying for almost an entire day now, and googling isn't revealing anything helpful. I don't know what I'm doing wrong. Can anyone point me in the right direction?

u should be using
- default installation ( you can also use silent installation for this)
admin-server/bin/startserv
wadm delete-instance --user admin
wadm delete-config --user admin

Sun Java Application Server - Domain and Node agent stop automatically

Hi,
We have installed Sun Java Application server 8.1 in a local zone on Solaris 10. The installation was successful.
A default domain (domain1) was created. We have deployed a sample application too.
The problem is that the domain and node-agent stop automatically. And need to be restarted from asadmin start-domain command.
Not sure why this problem is occurring. One solution given in Sun Java System AS 8.1 EE Troubleshooting Guide was to add these 2 lines in the /etc/inittab file to restart the domain and node-agent whenever the system re-boots.
das:3:respawn:/opt/SUNWappserver/bin/asadmin start-domain user admin passwordfile /opt/SUNWappserver/password.txt domain1
das:3:respawn:/opt/SUNWappserver/bin/asadmin start-node-agent user admin passwordfile /opt/SUNWappserver/password.txt node-agent-name
Pls help me if I can change this inittab file from the local zone and if changing this file has any implications on the other zones on Solaris 10.
Else is there any other way to resolve this problem?
Any help would be highly appreciated.
Thankyou.

One thing not clear from the post was,
* when it is going down automatically.
* Are you facing the same problem even after starting through the asadmin
* If so, Post the server.log from "domains/logs" during the starup.
If you want to bring it up with system reboot, You need to have a startup script for that in init.d and have the links to rc2/3.d.

Configuration Help - Sun Java Directory 5.2 and Active Directory Sync

Similar Messages

Maybe you are looking for