Configuration Manager 2012 - Hardware Inventory/Software Inventory insert into DB

Hello,
I have SCCM 2012 R2 with CU1, with multi site hierarchy. One stand alone primary site with few secondary sites beneath it.
Recently have noticed an issue with a few (100+) clients that we have Inventory issues. Although I was trying to find out the solution on my one for some time now it seems that it is over my head. So decided to ask for a tip or advice.
The issue is that for some reason 100 + clients do not update their Software/Hardware inventory. All clients are reporting well. The clients are sending the mif's back and they are being processed. The issue seems to be that for those 100 + the miff's
cannot be imported into the SQL. I am receiving errorcode_4 issue. By the posts I have found it is supposed to be SQL error with data being truncated for pINSTALLED_SOFTWARE_DATA. Any Idea on how to approach this.
I have tried reconfiguring Software/Hardware policies, reinstalling clients. Nothing helps. I have also tried to locate the installed app/software on the machines but no luck.
All Ideas on this are welcome.
Regards, Luka

Hello Torsten,
I have traced down the error to this event in the dataldr.log. I believe this is my actual issue. After this event there are plenty delta mismatches, which make sense as full inventory for machines cannot be imported. 
Begin transaction: Machine=RADO7(GUID:8DC6F66B-4D54-4184-8AFE-8FBA9A47CF95) SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:50 PM 3484 (0x0D9C)
*** [22001][8152][Microsoft][SQL Server Native Client 11.0][SQL Server]String or binary data would be truncated. : pINSTALLED_SOFTWARE_DATA SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:50 PM 3484 (0x0D9C)
ERROR - SQL Error in SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:51 PM 3484 (0x0D9C)
ERROR - is NOT retyrable. SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:51 PM 3484 (0x0D9C)
Rollback transaction: Machine=RADO7(GUID:8DC6F66B-4D54-4184-8AFE-8FBA9A47CF95) SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:51 PM 3484 (0x0D9C)
Cannot process MIF XH1MDK5IG.MIF, moving it to D:\Microsoft Configuration Manager\inboxes\auth\dataldr.box\BADMIFS\ErrorCode_4\ej0ybj1m.MIF SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:52 PM 3484 (0x0D9C)
STATMSG: ID=2703 SEV=W LEV=M SOURCE="SMS Server" COMP="SMS_INVENTORY_DATA_LOADER" SYS=SEYC-CCM-SIP1.EYC.COM SITE=EY1 PID=5436 TID=3484 GMTDATE=Wed Jul 30 10:56:52.451 2014 ISTR0="XH1MDK5IG.MIF" ISTR1="D:\Microsoft Configuration Manager\inboxes\auth\dataldr.box\BADMIFS\ErrorCode_4\ej0ybj1m.MIF"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:52 PM 3484 (0x0D9C)
Done: Machine=RADO7(GUID:8DC6F66B-4D54-4184-8AFE-8FBA9A47CF95) code=4 (3312 stored procs in XH1MDK5IG.MIF) SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:52 PM 3484 (0x0D9C)
Regards, Luka

Similar Messages

  • Access to hardware and software inventory?

    It seems that as soon as I make someone an administrator in the ZCM console, they get access to all the detailed hardware and software inventory of all devices. Is this true and if so, is there a way to deny it?
    What I want to be able to do is allow someone to manage bundles but not have access to the detailed hardware and software inventory of all the devices. Is this doable? I tried various combinations of deny rights but can't seem to get it to work.
    thanks for any help
    Arend

    axteraa,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Streamlined Client Management and VDI with Configuration Manager 2012

    Hi, 
    There is an interesting blog about managing ConfigMgr 2012 Clients in a VDI environment. 
    http://blogs.technet.com/b/server-cloud/archive/2011/11/15/streamlined-client-management-and-vdi-with-configuration-manager-2012.aspx
    But I didn't find any way or description in the blog on how to prepare the client in the base image used for VDI. Do we still have to make the client unique before shutting down the base image? Or will this be done automatically? 
    Are these new attributes (IsVirtual, IsMachineChangesPersistent ...) enabled by default? 
    Thanks!
    Gr. Cédric.

    No this is handled by ConfigMgr post SP1 
    Are these new attributes (IsVirtual, IsMachineChangesPersistent ...) enabled by default? 
    For XenDesktop  -no you will need to enable them in the client settings (not sure for other virtual
    solutions)
    In the SCCM Console go to the Administration workspace; click Client Settings. Right click the Default Client Settings and choose Properties
    Choose Hardware Inventory and click Set Classes.
    Click the Add button and then click Connect. 
    Enter the computer name of a master image device that has the SCCM client installed.
    Enter root\ccmvdi as the WMI namespace and click Connect.
    Select CCM_DesktopMachine. Click Ok.
    Cheers
    Paul | sccmentor.wordpress.com

  • Configuration Manager 2012 SP1 for Windows XP\Win 7\Win 8\Win 8.1 to Windows 8.1 Update 1

    Hi Team,
    We have Configuration manager 2012 SP1 and we have requirement to migrate winXP\Win7\Win8\Win8 systems to Windows 8.1 update 1. We are looking for supporting replace, refresh and baremetal OS deployments. Can anyone give some pointers for things we need
    to take care while planning approach for migrations. OS image for windows 8.1 update 1 are created through MDT 2013 and we are planning to use Config manager 2012 SP1 for deploying these images with above scenarios.
    Regards,

    More info:
    Operating System Deployment in Configuration Manager
    http://technet.microsoft.com/en-us/library/gg682018.aspx
    OSD in System Center 2012 Configuration Manager
    http://www.microsoft.com/en-us/download/details.aspx?id=42959
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Deploying Office 365 Pro Plus using System Center Configuration Manager 2012 SP1

    Hello,
    I am trying to deploy Office 365 Pro Plus to my client machines (more than 100) via. System Center Configuration Manager 2012 SP1. It will use one administrator account for installation. But as per the licensing, we can install Office for up to 5 PCs/Macs
    and 5 more Windows tablets/iPads with one Office 365 Pro Plus licenses. If this is the case, then I cannot install Office 365 Pro Plus with one admin account to my 100+ machines, as it will violate the licenses of O365 Pro Plus.   
    So, what is the alternative approach?
    Thanks
    Raj

    If this is the case, then I cannot install Office 365 Pro Plus with one admin account to my 100+ machines, as it will violate the licenses of O365 Pro Plus.
    Hi,
    this is incorrect.
    There is no licensing restriction/control for the *installation* account at all, the licensing is related to who is *using* Office365ProPlus *after* installation is performed. This control, is implemented by the Microsoft Account, or OrgID, used to sign-in/activate
    to Office365 when *using* Office365ProPlus.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Version of SQL Server Express for a Secondary Site in Configuration Manager 2012 R2

    Hi,
    I want to install a secondary site in my Configuration Manager 2012 R2. I want to install the SQL Server Express in a diferente drive. To do so, I want to previous install the SQL Server Express.
    Can I use the SQL Server 2014 Express?
    Thanks in advance...
    Dmsousa

    Sorry, going to be blunt here, but this is why "best practices" are useless. If you don't know the "why" of the best practice and when to apply it, it will cause you to do things that simply aren't necessary (or even harmful) by
    blindly trying to apply them. It is simply is not necessary for secondary sites for perf or any other reason. Also, if this is a VM, then your virtual disks will most likely be on the same physical disks which means you do *not* in any way gain any perf benefits
    anyway (perf benefits come from have additional physical spindles -- logical separation is just that *logical*).
    You have far bigger challenges ahead of you, push the easy button on this one, let ConfigMgr deploy SQL Express for you and move on.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Migrating from Marimba 8.1 to Configuration Manager 2012 R2

    Good morning all,
    I have been tasked with architecting a migration from Marimba 8.1 to Configuration Manager 2012 R2 and I noticed that there is almost no material available in the web about this, can someone provide whatever insight information possible?
    Thanks in advanced for your help on this matter
    Ed
    edthefixer

    Jeff,
    I agree with you on some of your thoughts, I should've describe the situation better.... I am not trying to migrate anything from Marimba, I am architecting an entire ConfigMgr 2012 R2 infrastructure altogether, what I am trying to do is (because I have
    to rationalize and normalize their DSL) see if I can salvage any applications and some level of their customization to convert them into ConfigMgr applications.... they have about 3000 apps and not all of them are in .msi format, Marimba uses a very strange
    folder format for this.... trying to see if anyone out there has dealt with this before.
    Ed
    edthefixer

  • How Does Configuration Manager 2012 R2 Endpoint Protection Stack Up to the Competition (Bit9, Symantec, McAfee, etc.)?

    I have a client in the financial services sector that owns System Center 2012 R2 (just Operations Manager 2012 R2 deployed so far) that is being courted by Bit9 for its "superior" endpoint protection. Can anyone point me to some credible resources
    for comparing Microsoft's Endpoint Protection (component of Configuration Manager 2012 R2) to the competition (Bit9, Symantec, McAfee, etc.)?
    If Microsoft's Endpoint Protection is "good enough" (and has a credible long term product roadmap), it probably makes sense to deploy that since it has already been purchased/licensed.  Any feedback is much appreciated.
    Thanks in advance.
    Bill Thacker

    Check out this page :
    http://www.microsoft.com/security/portal/mmpc/research/awards-and-certifications.aspx
    Under "Highlight" 
    There are many awards and certification programs across the IT security industry. Detailed below are some of the most widely recognized programs and testing
    bodies.
    Benoit Lecours | Blog: System Center Dudes

  • VHD for System Center Configuration Manager 2012 R2

    I just downloaded of TechNet the VHD of System Center Configuration Manager 2012 R2.  However when you bring it online it is in the domain Conteso. I have searched all over TechNet and the web, but there is no record of the admin password nor is there
    any documented instructions with the download.
    http://www.microsoft.com/en-us/download/details.aspx?id=40840
    Best regards,
    Dave Clauson
    Partner Online Technical Community
    We hope you get value from our new forums platform! Tell us what you think:
    http://social.microsoft.com/Forums/en-US/partnerfdbk/threads
    This posting is provided "AS IS" with no warranties, and confers no rights

    Hi,
    I think you should find the password for Windows Server 2012 R2. Please try
    R2Preview!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Microsoft System Center Configuration Manager 2012 R2 Reports

    Hi ;
    I can't run any reports on microsoft system center configuration manager 2012 R2. I see " No items found " when i click reports on microsoft System Center Configuration manager 2012 Console.But i access all reports by internet Explorer. End of
    all , i don't have any problem with queries.I am waiting for your helps.
    Sincerely yours ,

    Hi,
    It sounds like this should be the solution for you, changing the account for the SRS service.
    http://blog.coretech.dk/rja/no-srs-reports-showing-up-in-sccm-console/
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Configuration manager 2012 Client Deployment settings.

    GPO to push config mgr client
    i have added The Configuration Manager templates in GPO
    Under Configure Configuration manager 2012 Client Deployment settings.
    I have enabled it and what is the command line here
    CCMSetup.exe SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
    or
    SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
    or
    CCMSetup.exe /MP:sccm.mydomain.com  /logon SMSSITECODE=COD  SMSSLP=sccm.mydomain.com FSP=sccm.mydomain.com
    or
    /MP:sccm.mydomain.com  /logon SMSSITECODE=COD  SMSSLP=sccm.mydomain.com FSP=sccm.mydomain.com

    You can use the following:
    CCMSetup.exe
    SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
    http://prajwaldesai.com/deploying-configuration-manager-2012-r2-clients-using-group-policy/
    http://methmal132.wordpress.com/2013/02/13/how-to-push-the-sccm-agent-via-gpo/
    Regards, Ibrahim Hamdy

  • [Intune / Configuration Manager 2012 R2] Android Enrollment

    Hello
    I have a problem with my hybrid configuration (Intune / CM12 R2).
    I can't enroll Android Devices.
    What i've done :
    - Subscribe an account to Windows Intune
    - Activate AD synchronization
    - Change UPN in my Active Directory
    - Make a synchronization between my on-premise AD and Azure
    - Install Configuration Manager 2012 R2
    - Add Intune connector
    - Authorize my user collection 'Intune-user' to enroll devices
    - Add Windows Intune system role 
    - Authorize Android management
    When i try to enroll my android device (i first add company portal), i can log on with my user but i have a message that say : "We can't add this device. If this message open up again, contact your support ...".
    The only clue i have is in the dmpdownloader.log :
    ERROR: Service health log: Failed to load Enrollment Policy for accountId *********************************, userId ***********************************
    And in the dmpuploader.log :
    Ping cloud ... SMS_DMP_UPLOADER
    10/12/2013 16:50:14 4736 (0x1280)
    Ping cloud returned nothing
    Gaëtan

    Hello Gaëtan :)
    Did you succeed with Android device enroll ?
    I'm also done all steps you have mentioned but could not enroll Android device :(
    What is correct CNAME for EnterpriseEnrollment.MyDomain enroll:
    is it EnterpriseEnrollment.manage.Microsoft.com or is it only manage.Microsoft.com ?
    Also here is excerpt from companyportal_1.log I've sent to my mail from android device:
    2014-04-03T04:02:33.0490300Z CRIT Event       None                     0 7adaa89f-298f-4bc4-b28b-8ae9ea918787 11-0-0 EnrollmentServiceRequestException
    thrown: Microsoft.Management.Services.AndroidSSP.Exceptions.EnrollmentServiceRequestException: Enrollment service failed the request ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
       at System.Net.HttpWebRequest.CheckFinalStatus (System.Net.WebAsyncResult result) [0x00000] in <filename unknown>:0
       at System.Net.HttpWebRequest.SetResponseData (System.Net.WebConnectionData data) [0x00000] in <filename unknown>:0
       --- End of inner exception stack trace ---
       at Microsoft.Management.Services.AndroidSSP.Enrollment.EnrollmentSOAPRequestBase.SendRequestAndGetResponse (System.String pkcs10Base64) [0x00000] in <filename unknown>:0
       at Microsoft.Management.Services.AndroidSSP.Enrollment.EnrollmentRequest.Send (Android.Content.Context context) [0x00000] in <filename unknown>:0
    2014-04-03T04:02:33.0581540Z ERR_ Event       None                     0 7adaa89f-298f-4bc4-b28b-8ae9ea918787 1-1-1 Enrolling
    failed
    All other logs, OMADMLog_0, 1, 2, 3, 4, 5 have almost same content...
    Best regards
    Nenad

  • Configuration Manager 2012 SP1 CU4 Console - Content Status very slow

    I have a SCCM 2012 SP1 CU4 environment running.
    When using the console and viewing the Monitoring / Distribution Status / Content Status it took about 10-15 minutes to get the information.
    How can this be speed up a bit ? By adding additional indexes in SQL ?
    Any tips, hints are very welcome.

    Hi,
    Have you seen this previuous thread on the topic?
    https://social.technet.microsoft.com/Forums/en-US/7935143e-21a8-4770-83bf-7e1938d9defd/configuration-manager-2012-content-status-slow?forum=configmanagergeneral
    I would run the script from Ola that reports back on the indexe defragementeation and what I normally see as well is that more than one TempDB file increases performance greatly. It is most likely covered in the session mentioned above by Tim.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Is there an IPD for Configuration Manager 2012?

    I am getting serious of SCCM 2012 and start collecting information about it.
    Looking into the recent IPD in Technet I could only find IPD for SCCM 2007 R3.
    I am just wondering is there an IPD for SCCM 2012 and where can I find it, or is it coming?
    Thanks

    Hi,
    AS the latest published IPD was for OPSMGR 2012 Beta, my own assumption is that there will be no IPD for COnfiguration Manager 2012 published.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Hardware and Software inventory data shows blank in SCCM 2012

    Hi All,
    I have this issue. When i try to view the inventory data for hardware and software it shows blank data. Below is the screenshot of that. Mine is a lab setup and i have only 2 clients configured.
    I am using the default client settings which comes with priority of 10000. I altered the inventory setting to pull .dll and .exe files with changing the interval. But still the same issue. I analysed the InventoryAgent.log and found the below error on both
    the clients.
    Inventory: 1 Collection Task(s) failed.
    InventoryVersionNumber for '{00000000-0000-0000-0000-000000000003}' not found.
    CInvState::CheckInventoryAgentConfig: Get() failed: 80041002
    Can any one please help.
    Gautam.75801

    Hi Garth,
    A reboot just fixed the issue on that system in which the options are not coming to run the setup manually.
    As i had hibernated the VM's and the server in which those options were not coming is the physical box hosting the VM's (SCCM server and one more client). The physical box is also acting as a client and the SQL server holding the SCCM Database.
    Now things which need to be troubleshooted are:
    1. Why is it Hardware inventory report appearing after running the setup manually and not appearing automatically.
    2. The software inventory report is not appearing at all even after it is being run manually.
    Below is the screen shot of the default client settings policy i am using.
    Software inventory:
    Hardware inventory:
    My LAB setup is as follows:
    SCCMSVR.labtest.com  - Is the SCCM server and Fail back status point, Asset intellegence sync
    point and etc.
    Server.labtest.com - Is the Domain controller, SQL server
    SCCMTEST.labtest.com - A testing machine to push the client and to deploy patches in it.
    Site code is LAB
    Grath - What do you suggest is the next Plan of action which you suggest ?
    Gautam.75801

Maybe you are looking for