Configuration Manager 2012: Report -software 06B-Parameter Value

Customer is deploying IE 9 and would like to run the report to show the status.
However, when they run the report-software 06B, the Parameter Value only list IE7, no IE 8 and IE 9.
Please help to solve this question, thanks.

Yes I know this is an old post, I’m just trying to clean up old posts.
That report is based on AI (ARP) data and therefore if you didn’t install IE 8 or 9 on a PC it will not be listed.
http://www.enhansoft.com/

Similar Messages

Microsoft System Center Configuration Manager 2012 R2 Reports

Hi ;
I can't run any reports on microsoft system center configuration manager 2012 R2. I see " No items found " when i click reports on microsoft System Center Configuration manager 2012 Console.But i access all reports by internet Explorer. End of
all , i don't have any problem with queries.I am waiting for your helps.
Sincerely yours ,

Hi,
It sounds like this should be the solution for you, changing the account for the SRS service.
http://blog.coretech.dk/rja/no-srs-reports-showing-up-in-sccm-console/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

VHD for System Center Configuration Manager 2012 R2

I just downloaded of TechNet the VHD of System Center Configuration Manager 2012 R2. However when you bring it online it is in the domain Conteso. I have searched all over TechNet and the web, but there is no record of the admin password nor is there
any documented instructions with the download.
http://www.microsoft.com/en-us/download/details.aspx?id=40840
Best regards,
Dave Clauson
Partner Online Technical Community
We hope you get value from our new forums platform! Tell us what you think:
http://social.microsoft.com/Forums/en-US/partnerfdbk/threads
This posting is provided "AS IS" with no warranties, and confers no rights

Hi,
I think you should find the password for Windows Server 2012 R2. Please try
R2Preview!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Configuration Manager 2012 SP1 CU4 Console - Content Status very slow

I have a SCCM 2012 SP1 CU4 environment running.
When using the console and viewing the Monitoring / Distribution Status / Content Status it took about 10-15 minutes to get the information.
How can this be speed up a bit ? By adding additional indexes in SQL ?
Any tips, hints are very welcome.

Hi,
Have you seen this previuous thread on the topic?
https://social.technet.microsoft.com/Forums/en-US/7935143e-21a8-4770-83bf-7e1938d9defd/configuration-manager-2012-content-status-slow?forum=configmanagergeneral
I would run the script from Ola that reports back on the indexe defragementeation and what I normally see as well is that more than one TempDB file increases performance greatly. It is most likely covered in the session mentioned above by Tim.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Configuration Manager 2012 SP1 for Windows XP\Win 7\Win 8\Win 8.1 to Windows 8.1 Update 1

Hi Team,
We have Configuration manager 2012 SP1 and we have requirement to migrate winXP\Win7\Win8\Win8 systems to Windows 8.1 update 1. We are looking for supporting replace, refresh and baremetal OS deployments. Can anyone give some pointers for things we need
to take care while planning approach for migrations. OS image for windows 8.1 update 1 are created through MDT 2013 and we are planning to use Config manager 2012 SP1 for deploying these images with above scenarios.
Regards,

More info:
Operating System Deployment in Configuration Manager
http://technet.microsoft.com/en-us/library/gg682018.aspx
OSD in System Center 2012 Configuration Manager
http://www.microsoft.com/en-us/download/details.aspx?id=42959
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Deploying Office 365 Pro Plus using System Center Configuration Manager 2012 SP1

Hello,
I am trying to deploy Office 365 Pro Plus to my client machines (more than 100) via. System Center Configuration Manager 2012 SP1. It will use one administrator account for installation. But as per the licensing, we can install Office for up to 5 PCs/Macs
and 5 more Windows tablets/iPads with one Office 365 Pro Plus licenses. If this is the case, then I cannot install Office 365 Pro Plus with one admin account to my 100+ machines, as it will violate the licenses of O365 Pro Plus.
So, what is the alternative approach?
Thanks
Raj

If this is the case, then I cannot install Office 365 Pro Plus with one admin account to my 100+ machines, as it will violate the licenses of O365 Pro Plus.
Hi,
this is incorrect.
There is no licensing restriction/control for the *installation* account at all, the licensing is related to who is *using* Office365ProPlus *after* installation is performed. This control, is implemented by the Microsoft Account, or OrgID, used to sign-in/activate
to Office365 when *using* Office365ProPlus.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Version of SQL Server Express for a Secondary Site in Configuration Manager 2012 R2

Hi,
I want to install a secondary site in my Configuration Manager 2012 R2. I want to install the SQL Server Express in a diferente drive. To do so, I want to previous install the SQL Server Express.
Can I use the SQL Server 2014 Express?
Thanks in advance...
Dmsousa

Sorry, going to be blunt here, but this is why "best practices" are useless. If you don't know the "why" of the best practice and when to apply it, it will cause you to do things that simply aren't necessary (or even harmful) by
blindly trying to apply them. It is simply is not necessary for secondary sites for perf or any other reason. Also, if this is a VM, then your virtual disks will most likely be on the same physical disks which means you do *not* in any way gain any perf benefits
anyway (perf benefits come from have additional physical spindles -- logical separation is just that *logical*).
You have far bigger challenges ahead of you, push the easy button on this one, let ConfigMgr deploy SQL Express for you and move on.
Jason | http://blog.configmgrftw.com | @jasonsandys

Streamlined Client Management and VDI with Configuration Manager 2012

Hi,
There is an interesting blog about managing ConfigMgr 2012 Clients in a VDI environment.
http://blogs.technet.com/b/server-cloud/archive/2011/11/15/streamlined-client-management-and-vdi-with-configuration-manager-2012.aspx
But I didn't find any way or description in the blog on how to prepare the client in the base image used for VDI. Do we still have to make the client unique before shutting down the base image? Or will this be done automatically?
Are these new attributes (IsVirtual, IsMachineChangesPersistent ...) enabled by default?
Thanks!
Gr. Cédric.

No this is handled by ConfigMgr post SP1
Are these new attributes (IsVirtual, IsMachineChangesPersistent ...) enabled by default?
For XenDesktop -no you will need to enable them in the client settings (not sure for other virtual
solutions)
In the SCCM Console go to the Administration workspace; click Client Settings. Right click the Default Client Settings and choose Properties
Choose Hardware Inventory and click Set Classes.
Click the Add button and then click Connect.
Enter the computer name of a master image device that has the SCCM client installed.
Enter root\ccmvdi as the WMI namespace and click Connect.
Select CCM_DesktopMachine. Click Ok.
Cheers
Paul | sccmentor.wordpress.com

Migrating from Marimba 8.1 to Configuration Manager 2012 R2

Good morning all,
I have been tasked with architecting a migration from Marimba 8.1 to Configuration Manager 2012 R2 and I noticed that there is almost no material available in the web about this, can someone provide whatever insight information possible?
Thanks in advanced for your help on this matter
Ed
edthefixer

Jeff,
I agree with you on some of your thoughts, I should've describe the situation better.... I am not trying to migrate anything from Marimba, I am architecting an entire ConfigMgr 2012 R2 infrastructure altogether, what I am trying to do is (because I have
to rationalize and normalize their DSL) see if I can salvage any applications and some level of their customization to convert them into ConfigMgr applications.... they have about 3000 apps and not all of them are in .msi format, Marimba uses a very strange
folder format for this.... trying to see if anyone out there has dealt with this before.
Ed
edthefixer

How Does Configuration Manager 2012 R2 Endpoint Protection Stack Up to the Competition (Bit9, Symantec, McAfee, etc.)?

I have a client in the financial services sector that owns System Center 2012 R2 (just Operations Manager 2012 R2 deployed so far) that is being courted by Bit9 for its "superior" endpoint protection. Can anyone point me to some credible resources
for comparing Microsoft's Endpoint Protection (component of Configuration Manager 2012 R2) to the competition (Bit9, Symantec, McAfee, etc.)?
If Microsoft's Endpoint Protection is "good enough" (and has a credible long term product roadmap), it probably makes sense to deploy that since it has already been purchased/licensed. Any feedback is much appreciated.
Thanks in advance.
Bill Thacker

Check out this page :
http://www.microsoft.com/security/portal/mmpc/research/awards-and-certifications.aspx
Under "Highlight"
There are many awards and certification programs across the IT security industry. Detailed below are some of the most widely recognized programs and testing
bodies.
Benoit Lecours | Blog: System Center Dudes

Configuration manager 2012 Client Deployment settings.

GPO to push config mgr client
i have added The Configuration Manager templates in GPO
Under Configure Configuration manager 2012 Client Deployment settings.
I have enabled it and what is the command line here
CCMSetup.exe SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
or
SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
or
CCMSetup.exe /MP:sccm.mydomain.com /logon SMSSITECODE=COD SMSSLP=sccm.mydomain.com FSP=sccm.mydomain.com
or
/MP:sccm.mydomain.com /logon SMSSITECODE=COD SMSSLP=sccm.mydomain.com FSP=sccm.mydomain.com

You can use the following:
CCMSetup.exe
SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
http://prajwaldesai.com/deploying-configuration-manager-2012-r2-clients-using-group-policy/
http://methmal132.wordpress.com/2013/02/13/how-to-push-the-sccm-agent-via-gpo/
Regards, Ibrahim Hamdy

[Intune / Configuration Manager 2012 R2] Android Enrollment

Hello
I have a problem with my hybrid configuration (Intune / CM12 R2).
I can't enroll Android Devices.
What i've done :
- Subscribe an account to Windows Intune
- Activate AD synchronization
- Change UPN in my Active Directory
- Make a synchronization between my on-premise AD and Azure
- Install Configuration Manager 2012 R2
- Add Intune connector
- Authorize my user collection 'Intune-user' to enroll devices
- Add Windows Intune system role
- Authorize Android management
When i try to enroll my android device (i first add company portal), i can log on with my user but i have a message that say : "We can't add this device. If this message open up again, contact your support ...".
The only clue i have is in the dmpdownloader.log :
ERROR: Service health log: Failed to load Enrollment Policy for accountId *********************************, userId ***********************************
And in the dmpuploader.log :
Ping cloud ... SMS_DMP_UPLOADER
10/12/2013 16:50:14 4736 (0x1280)
Ping cloud returned nothing
Gaëtan

Hello Gaëtan :)
Did you succeed with Android device enroll ?
I'm also done all steps you have mentioned but could not enroll Android device :(
What is correct CNAME for EnterpriseEnrollment.MyDomain enroll:
is it EnterpriseEnrollment.manage.Microsoft.com or is it only manage.Microsoft.com ?
Also here is excerpt from companyportal_1.log I've sent to my mail from android device:
2014-04-03T04:02:33.0490300Z CRIT Event      None                     0 7adaa89f-298f-4bc4-b28b-8ae9ea918787 11-0-0 EnrollmentServiceRequestException
thrown: Microsoft.Management.Services.AndroidSSP.Exceptions.EnrollmentServiceRequestException: Enrollment service failed the request ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
   at System.Net.HttpWebRequest.CheckFinalStatus (System.Net.WebAsyncResult result) [0x00000] in <filename unknown>:0
   at System.Net.HttpWebRequest.SetResponseData (System.Net.WebConnectionData data) [0x00000] in <filename unknown>:0
   --- End of inner exception stack trace ---
   at Microsoft.Management.Services.AndroidSSP.Enrollment.EnrollmentSOAPRequestBase.SendRequestAndGetResponse (System.String pkcs10Base64) [0x00000] in <filename unknown>:0
   at Microsoft.Management.Services.AndroidSSP.Enrollment.EnrollmentRequest.Send (Android.Content.Context context) [0x00000] in <filename unknown>:0
2014-04-03T04:02:33.0581540Z ERR_ Event      None                     0 7adaa89f-298f-4bc4-b28b-8ae9ea918787 1-1-1 Enrolling
failed
All other logs, OMADMLog_0, 1, 2, 3, 4, 5 have almost same content...
Best regards
Nenad

Is there an IPD for Configuration Manager 2012?

I am getting serious of SCCM 2012 and start collecting information about it.
Looking into the recent IPD in Technet I could only find IPD for SCCM 2007 R3.
I am just wondering is there an IPD for SCCM 2012 and where can I find it, or is it coming?
Thanks

Hi,
AS the latest published IPD was for OPSMGR 2012 Beta, my own assumption is that there will be no IPD for COnfiguration Manager 2012 published.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Configuration Manager 2012 - Hardware Inventory/Software Inventory insert into DB

Hello,
I have SCCM 2012 R2 with CU1, with multi site hierarchy. One stand alone primary site with few secondary sites beneath it.
Recently have noticed an issue with a few (100+) clients that we have Inventory issues. Although I was trying to find out the solution on my one for some time now it seems that it is over my head. So decided to ask for a tip or advice.
The issue is that for some reason 100 + clients do not update their Software/Hardware inventory. All clients are reporting well. The clients are sending the mif's back and they are being processed. The issue seems to be that for those 100 + the miff's
cannot be imported into the SQL. I am receiving errorcode_4 issue. By the posts I have found it is supposed to be SQL error with data being truncated for pINSTALLED_SOFTWARE_DATA. Any Idea on how to approach this.
I have tried reconfiguring Software/Hardware policies, reinstalling clients. Nothing helps. I have also tried to locate the installed app/software on the machines but no luck.
All Ideas on this are welcome.
Regards, Luka

Hello Torsten,
I have traced down the error to this event in the dataldr.log. I believe this is my actual issue. After this event there are plenty delta mismatches, which make sense as full inventory for machines cannot be imported.
Begin transaction: Machine=RADO7(GUID:8DC6F66B-4D54-4184-8AFE-8FBA9A47CF95) SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:50 PM 3484 (0x0D9C)
*** [22001][8152][Microsoft][SQL Server Native Client 11.0][SQL Server]String or binary data would be truncated. : pINSTALLED_SOFTWARE_DATA SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:50 PM 3484 (0x0D9C)
ERROR - SQL Error in SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:51 PM 3484 (0x0D9C)
ERROR - is NOT retyrable. SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:51 PM 3484 (0x0D9C)
Rollback transaction: Machine=RADO7(GUID:8DC6F66B-4D54-4184-8AFE-8FBA9A47CF95) SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:51 PM 3484 (0x0D9C)
Cannot process MIF XH1MDK5IG.MIF, moving it to D:\Microsoft Configuration Manager\inboxes\auth\dataldr.box\BADMIFS\ErrorCode_4\ej0ybj1m.MIF SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:52 PM 3484 (0x0D9C)
STATMSG: ID=2703 SEV=W LEV=M SOURCE="SMS Server" COMP="SMS_INVENTORY_DATA_LOADER" SYS=SEYC-CCM-SIP1.EYC.COM SITE=EY1 PID=5436 TID=3484 GMTDATE=Wed Jul 30 10:56:52.451 2014 ISTR0="XH1MDK5IG.MIF" ISTR1="D:\Microsoft Configuration Manager\inboxes\auth\dataldr.box\BADMIFS\ErrorCode_4\ej0ybj1m.MIF"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:52 PM 3484 (0x0D9C)
Done: Machine=RADO7(GUID:8DC6F66B-4D54-4184-8AFE-8FBA9A47CF95) code=4 (3312 stored procs in XH1MDK5IG.MIF) SMS_INVENTORY_DATA_LOADER 7/30/2014 12:56:52 PM 3484 (0x0D9C)
Regards, Luka

Configuration Manager 2012 R2 - SRS Reporting Services not configuring Report Server

Hi all,
I am running stand-alone primary site and remote (shared) SQL 2012 SP1 on Windows 2012 R2 Standard. Remote SQL server is currently hosting multiple instances and Configuratoin Manager is running on a custom instance. SCOM databases also co-exist on the same
SQL environment (different instance with SSRS installed & running perfectly).
After setting up the Reporting Services role on Configuration Manager environment, srsrpsetup.log & srsrpMSI.log states installation is successful. However, when monitoring srsrp.log file, we encounter the below message -
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 5232 (0x1470).
SMS_SRS_REPORTING_POINT 02/12/2014
07:44:00 7828 (0x1E94)
This is a SRS Reporting Point Role as SRSRP registry key exists.
SMS_SRS_REPORTING_POINT 02/12/2014 07:44:15
5232 (0x1470)
Waiting for changes for 0 minutes SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Timed Out... SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Check state SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Check server health. SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Registry change SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Timed Out... SMS_SRS_REPORTING_POINT
02/12/2014 07:45:15 5232 (0x1470)
Steps taken so far -
1. Switched reporting services to run from local system account to domain account.
2. Created new Report Server database on our instance and reconfigured Reporting Services to this DB.
3. Un-installed and re-installed Reporting Services role in Configuration Manager
4. Un-installed and re-installed SSRS on Configuration Manager (dedicated) SQL instance after removing Reporting Services role in CM12.
I have referred couple of links on forum and none seem to help resolve this issue.
Let me know if there is anything specific I missed out from my end. Appreciate any assistance.
Regards,
mittu

It seems that Reporting Services for SCOM and SCCM cannot co-exist on the same server (it sounds like a bad idea anyway)
http://www.systemcentercentral.com/system-center-2012using-a-common-sql-backend-database-sysctr-scom-scsm/
https://social.technet.microsoft.com/Forums/en-US/7e6b5ae9-04c8-4c5d-a77f-9f5208d4e65f/is-it-possible-to-deploy-2-scom-2012-r2-reporting-in-a-sql-server-which-already-has-scom-reporting?forum=operationsmanagerreporting
https://social.technet.microsoft.com/Forums/systemcenter/en-US/0332b156-bc36-4699-8775-a561915f35ab/scom-2012-reporting-components-with-a-shared-sql-cluster?forum=operationsmanagerdeployment
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Configuration Manager 2012: Report -software 06B-Parameter Value

Similar Messages

Maybe you are looking for