Configuration Manager Idle Detection

Anyone know what this in task scheduler is for? I do have the Configuration Manager Health Evaluation as well but I know that checks the client health and will repair WMI if needed. What is this other task for?

As the name suggests it detects periods of idleness for power management purposes.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

  • Upgrading to R2 stuck on "Configuration Manager has detected an active MP Replica on this site."

    Hello Everyone,
    We are installing upgrading our SCCM 2012 server to R2 and we are stuck on;
    "Configuration Manager has detected an active MP Replica on this site. Please deactivate this MP before continuing upgrade."
    I have tried disabling SQL service on the MPs but that didn't work. So could anyone give me any help on the procedure on how to deactivate the MP as requested?
    Thank you in advance for anyhelp.

    From the beginning we didn't have Replicas at all! 
    We checked each DP and Secondary Site and they are already all disabled.
    You should have mentioned that fact earlier ....
    What did you check and what's disabled? 
    Torsten Meringer | http://www.mssccmfaq.de

  • Stuck by Upg BW 7.01 to 7.3 Step Configuration-Check Instances Detected

    Hello,
    i have a problem during the Step Check Instances Detected Phase  (Configuration)
    the following error is shown:
    An error has occurred during the execution of the CHECK_INSTANCES_DETECTED phase.
    There is a mismatch between the dialog instances detected by the maintenance procedure and the dialog instances read from Configuration Manager. Possible reasons can be: Dialog instances were removed before starting the maintenance procedure and
    SAP Note 871523 was not applied afterwards. Some of the dialog instances were not up and running when the procedure was started. Dialog instances detected by the maintenance procedure: DVEBMGS00 on svrsid02 with profile:/usr/sap/SID/SYS/profile/SID_DVEBMGS00_svrctw02 Dialog instances read from Configuration Manager: none
    You can find more information in the log file /usr/sap/SID/upg/java/log/CHECK_INSTANCES_DETECTED_CID_06.LOG.
    do anybody have an answer for this problem ?
    Thanks a lot
    Steven

    Hi DatabaseSap,
    yes i did, but i do´t know where the problem is !
    Is there a problem with my profiles ?
    What is the Configuration Manager -> Log = Dialog instances read from Configuration Manager: none
    i cleaned up the upgade directory for the third time, restart the server, cleanipc, searching in config tool for an old Instanz ID or anything else ... nothing help to release the problem.
    Thanks
    Steven
    Oct 18, 2011 2:51:11 PM :                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:751) [Thread[main,5,main]]: Phase PREPARE/INIT/CHECK_INSTANCES_DETECTED has been started.
    Oct 18, 2011 2:51:11 PM :                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:752) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypeCheckDialogInstances.
    Oct 18, 2011 2:51:11 PM :                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:403) [Thread[main,5,main]]:   Parameter action=detect
    Oct 18, 2011 2:51:12 PM : com.sap.sdt.j2ee.tools.configutils.AbstractConfigUtils.getAllInstanceNumbers(AbstractConfigUtils.java:286) [Thread[main,5,main]]: Found instance ID3397250 in configuration manager.
    Oct 18, 2011 2:51:12 PM : com.sap.sdt.j2ee.services.servicesimpl.CheckInstancesService.logInfo(CheckInstancesService.java:186) [Thread[main,5,main]]: Instance ID33972 in configuration manager was detected as central instance.
    Oct 18, 2011 2:51:12 PM :                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:883) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Oct 18, 2011 2:51:12 PM : com.sap.sdt.j2ee.services.servicesimpl.CheckInstancesService.checkDialogInstancesDetected(CheckInstancesService.java:131) [Thread[main,5,main]]: There is a mismatch between the dialog instances detected by the maintenance procedure and
    the dialog instances read from Configuration Manager. Possible reasons can be:
    Dialog instances were removed before starting the maintenance procedure and SAP Note 871523 was not applied afterwards.
    Some of the dialog instances were not up and running when the procedure was started.
    Dialog instances detected by the maintenance procedure:
    DVEBMGS00 on svrsid02
    with profile:/usr/sap/sid/SYS/profile/sid_DVEBMGS00_svrsid02
    Dialog instances read from Configuration Manager: noneOct 18, 2011 2:51:12 PM :                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:925) [Thread[main,5,main]]: Phase PREPARE/INIT/CHECK_INSTANCES_DETECTED has been completed.
    Oct 18, 2011 2:51:12 PM :                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:926) [Thread[main,5,main]]: Start time: 2011/10/18 14:51:11.
    Oct 18, 2011 2:51:12 PM :                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:928) [Thread[main,5,main]]: End time: 2011/10/18 14:51:12.
    Oct 18, 2011 2:51:12 PM :                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:930) [Thread[main,5,main]]: Duration: 0:00:00.512.
    Oct 18, 2011 2:51:12 PM :                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:931) [Thread[main,5,main]]: Phase status is error.
    Edited by: Steven Bier on Oct 19, 2011 6:46 AM
    Edited by: Steven Bier on Oct 19, 2011 6:48 AM

  • [Forum FAQ] Configuration Manager Console shows nothing if you change SSRS to using SSL after Reporting Service Point is installed

    If the SSRS is changed to SSL mode and http binding is removed after Reporting Service Point is installed. The Configuration Manager Console shows nothing in Reporting Pane. After digging into this problem, the cause is that the SSRS information has not
    been updated in Configuration Manager Database. The following steps are taken for finding the root cause.
    1. After changing to SSL, the Reporting Service Point log shows the error as shown in Figure 1.
    The request failed with HTTP status 404: Not Found.
    (!) SRS not detected as running
    Failures reported during periodic health check by the SRS Server DB2.SCJIZHO.COM.
    Figure 1
    From the error, seems the cause was the Reporting Service Point detected a wrong port. We digged around in Registry and found the information is a Registry key named ReportServerUri at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP. After changing the Report
    Server address to https. The error is gone as shown in Figure 2. But the issue remains, the Console still shows nothing. It is not a right direction.
    Figure 2
    2. Open the Console log file, it also shows some valuable information.
    instance of __ExtendedStatus
                    Operation = "ExecQuery";
                    ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'PRI'";
                    ProviderName = "WinMgmt";
    \r\n
    [1, PID:3136][04/24/2014 01:46:00] :Property: 'LastModifiedTime'\r\nSystem.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.PropertyData.RefreshPropertyInfo()
       at System.Management.PropertyDataCollection.get_Item(String propertyName)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
    [52, PID:3136][05/11/2014 20:14:15] :[ReportProxy] - User-specified default Reporting Point [PRI.scjizho.com] could not be found, [DB2.scjizho.com] is now the default Reporting Point (Figure 3).
    Figure 3
    It seems the Console wants to access the old http site and it fails to get into the site for sure. Actually, the Site Configuration information is come from Site Control File and as we all know that ConfigMgr 2012 doesn’t store the Site Control file in the
    file system. However, it’s stored in the SQL database (as XML file). The XML file is stored in a view named vSMS_SC_SiteControlXML. This view is a read-only view. We cannot edit it directly. The related table stored the SSRS information for this view is SC_SysResUse_Property.
    Running the following query will list the SSRS address. We can see the address is still the old one. This is why the Console shows nothing.
    SELECT
    name,
    value2
    FROM dbo.SC_SysResUse_Property
    where name
    ='ReportServerUri'
    or name=
    'ReportManagerUri'
    Remarks:
    This article is just to let you know why the Console cannot show the Reports after changing to SSL mode. We do not intend to make you change the table in Database, if you want to change it, you will be at your own risk. The real solution to this situation
    is to reinstall your Reporting Service Point.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Ok, but how do you solve this problem? Does uninstalling the RP and adding it back solve this problem?
    http://www.enhansoft.com/

  • Unable to start ICM Configuration Manager in ICM 8.5

    Hi,
    We are in the midst of setting the unified contact center 8.5.2 on windows server 2008 R2.
    We are using CUCM 8.5. As for the icm 8.5.2, the servers are as follows:
    1. Router A & logger A & CMPG A & VRU PG A on 1 mcs 7845
    2. Router B & logger B & CMPG B & VRU PG B on 1 mcs 7845
    3. Administration/ Data server with HDS on 1 mcs 7845
    All servers are running ms SQL server 2005 with sp2. When the instance and all components
    were created, I could start all services on these 3 servers. But when I tried to open the
    Configuration Manager, it showed an error "(-9959) The AWDB needs to be reloaded before
    any operations may be attempted. Please run Initialize Local Database."
    Then I tried to start the process in the Initialize Local Database windows, it threw out
    another error saying "the pipe has ended" following by another message "the process is
    completed".
    Then I tried o start the configuration manager or the script editor again, the same
    problem still persists. I tried to recreate the Administration server & data server component again, but it
    doesn't help. I also tried to delete the AWDB but it said the database in current in use.
    Did I miss out any important steps here? Appreciate your help to rectify this issue ASAP.
    I also noticed version 8.x and 7.5 is so much different. How do I check the each icm
    process like the process window in version 7.5?
    Thanks & regards,
    Eric

    Geoff is correct...and I would agree with David as well.
    I will try to be more specific and answer both questions:
    On Windows Server 2003, SQL Server 2005 Service Pack 3 or higher is the requirement.
    On Windows Server 2008 R2, SQL Server 2005 Service Pack 4 or higher is the requirement.
    The validation should be enforced in ICM Installer 8.0(1a).
    Specifically, if SQL Server 2005 is detected on a machine and if the service pack is not minimally correct, when ICMCCInstaller version 8.0(1a) is run, the following severe error will be displayed to the user as well as being logged in the ICMInstall.log:
    "[Error] Microsoft SQL Server 2005 installation does not have a high enough service pack.  Cisco Unified ICM/Contact Center Enterprise & Hosted requires Microsoft SQL Server 2005 with Service Pack or greater."
    where is 3 when running on Windows Server 2003 and 4 when running on Windows Server 2008 R2.
    didn't you see this message when installing it?
    The 8.0(1a) full installer contains the same file set as the 8.0(1) FCS version. The difference is in the InstallShield installer, which allows customers to install the product on Windows 2003 or Windows Server 2008 R2 (whereas the FCS version did not allow W2k8). Release 8.0(1a) completely replaces 8.0(1). End user documentation still just refers to 8.0(1) (i.e. you will not see reference to 8.0(1a)).
    Note: 8.0(1a) does not have the complete working solution for Windows Server 2008 R2. You must apply the 8.5(2) or higher maintenance release in addition to 8.0(1a) to have a working solution. The MR contains bug fixes specific to Windows Server 2008 R2.
    Now, how to see processes...well...say goodbye to that one as it is used to be
    No UCCE Process Windows
    In Windows Server 2008 R2, session 0, where Windows services run, has no desktop. No user can login to session 0 as previously known as console. And since there is no desktop, no visible object of any type can be displayed. Among such objects are the UCCE process windows. Customers and TAC have long relied on the process windows to diagnose the system and provide a feel good indicator that the system is running. The title bars of some windows are critical for determining things like which side is active. The tracing provided in some windows sometimes made it easier to diagnose or monitor certain conditions, especially in reproduction during a maintenance window. The goal was to make this same information available in another way.
    Diagnostic Framework Portico: Process Status Info (title bar)
    The status of the UCCE processes is used to be shown in the title bar of the corresponding process window.  Since all UCCE process windows no longer show up in the taskbar, users are not able to use the process windows to check the status of the UCCE processes anymore.  As a result, process status information was added to the Diagnostic Framework Portico.
    The Diagnostic Framework Portico is a web-based GUI that list the current running UCCE processes.
    You can also access the Diagnostic Framework Portico by choosing All Programs > Cisco Unified CCE Tools > Diagnostic Framework Portico.
    Note that the process status information is now displayed.  Additionally status changes and low uptime is highlighted. Uptime will be red if uptime is less than 10 minutes and yellow less than 30 minutes. These will also be underlined. This will help to identify cycling services. Status changes will be highlighted and made bold when a process's status changes. This highlighting will last for 10 minutes or until the status returns to its original state. Also as compared to the original page, the vertical space has been used more efficiently to fit more processes on a single page without scrolling. There is also a refresh checkbox which when checked will refresh the page every 5 seconds. It is checked by default.
    EMSMon: Process EMS Messages
    In Release 8.5(2), for Windows 2008, process windows for ICM processes are no longer available. The title bar status information is available in the Diagnostic Portico; however, real time data does not appear there. To address this, Cisco recommends that partners and TAC use EMSMON as a replacement.
    EMSMON has been with UCCE/ICM since the earliest versions of ICM. EMSMON displays logged messages from a process as they are logged. It displays the same content as the former process windows. The two exceptions are the title bar and stdout and stderr output. Events are logged for all processes and appear in EMSMON. However, rare error condition messages (shelled processes, and so on) that go to stdout do not appear in an EMSMON window.
    You can start EMSMON while the process is up or down. If the process is down, EMSMON displays messages from the process when the process starts. EMSMON does not end when the process ends. To end EMSMON, press CTRL+C or close the window.
    Note: To prevent ICM processes from queueing too many EMSMON messages and exceeding the system memory, ICM processes may drop queued EMSMON messages. If this happens, EMSMON clients display a message indicating one of the clients fell behind and there is a gap. This message is also logged in the processes event log. This can happen if a particular EMSMON client is too slow or paused by quick edit or ctrl/s for example.
    How to run EMSMON
    EMSMON has the same parameters as procmon:
    *Instance/Customer Node process,[process] [System]
    The System parameter is optional. You can use it to run EMSMON from a machine remote from where the process is running.
    For example, if the Instance/Customer Node is ?ucce and you want to monitor the JTAPI gateway on PG1A, type the following:
    EMSMON ucce PG1A jgw1
    If you are remote and the machine name is UCCEPG1A, type:
    EMSMON ucce PG1A jgw1 UCCEPG1A
    Note: A trust relationship must exist between the two machines. (Use the “NET USE” command or something similar).
    The following list includes some EMSMON facts:
    EMSMON (like DUMPLOG) can monitor multiple processes. The use of EMSMON to monitor multiple processes is not discussed here.
    A single EMSMON can monitor multiple processes and merge their output (for example, (jgw1 and pim1).
    Multiple EMSMONs can watch a single process. For example, you can have a local (on box) EMSMON and a remote EMSMON. Cisco recommends that you use one EMSMON only for each process.
    To reserve system resources for ICM processes, it is recommended that you run the EMSMON client on a remote machine that does not host ICM processes. For example, running EMSMON client on side A of a PG and connecting it to a process on side B of a PG is not recommended.
    To run EMSMON on a remote machine, copy emsmon.exe, emsmon.pdb, and icrmessages.dll from c:\icm\bin and place them on a remote machine.
    You can cut and paste just as in the command windows but it is safer in EMSMON.
    You can start EMSMON at anytime, even when the process is not running. (You can have a batch file on a machine to start sessions.)
    For history (events prior to EMSMON starting), use DUMPLOG.
    To change the number of lines each EMSMON window retains, modify the command window parameters.
    With EMSMON, you can have one local connection and five remote connections per process. When the number of connections is exceeded, the oldest session is disconnected with the following message ?You are being disconnected because another user has connected to this named pipe.
    If your system is running a heavy call load, your EMSMON connections may disconnect and the following message appears: ? You are being disconnected because the system is running a heavy call load; this connection may impact the performance of the system. It is recommended that you do not reconnect your EMSMON sessions until your system returns to a normal call load
    Thanks,
    Goran
    Please rate with 5 stars if you find this post useful.

  • Vold Manager never detects the cd rom and any other removable media

    Hi,
    I have installed solaris 10(i86pc i386 i86pc) on my PC through Oracle Virtual box but I am stucked in a problem that the vold manager never detects the cd rom and any other removable media devices. I have tried many documented methods but could not get solution to this problem. I also stopped the volume manager (vold) and tried to mount the cd rom manually but still could not mount the cd rom.
    I don't know how to configure solaris in such a way that it could detect cd rom and any other removable media.
    Any help in this regard will be highly appreciated.
    Regards,
    Anees

    Is it an IDE or SCSI CD-ROM? Can you post back the output of the following command?
    ls -l /dev/dsk/c*

  • Configuration Manager Client Retry Scheduled Task not removed

    I have had several clients where the “Configuration Manager Client Retry” scheduled task is not removed after a successful install. The task will run daily and reinstall the client
    over and over until someone notices and we delete the task. So far I have only seen this happen on R2 clients (5.00.7958.1000). Has anyone ever run into this before? Thanks!

    Hi,
    Has this client installed successfully during the reinstall process?(ccmsetup.log and Client.msi.log) 
    Please check ccrretry.box in Program Files->Microsoft Configuration Manager->inboxes and Ccm.log on the site server to get more information. SCCM might cannot detect the SMS Agent Host is running.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • In Central Configuration manager only few contents are coming

    Hello,
    I have installed BO XI 3.1.
    I have installed freshly & i am facing some problems in Central configuration manager .
    In Central Configuration manager only few contents like :
    Apche Tomcat 5.5.2.0
    OracleOraHome92HTTPServer
    WinHTTP Web Proxy Auto-Detective Service
    World Wide Web Publishing Service
    are coming rest all are not coming , can anyone help me to resolve this issue.
    Thanks
    Priyanka

    Hello Priyanka,
    I think you are looking for the server list.
    With BOE R3 and the introduction of the SIA the servers are managed be the SIA.
    If you need to see the serverlist go to the CMC or clicl in enable/disable server.
    I recommend to post further queries to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Central Configuration manager only few contents are coming

    Hello,
    I have installed BO XI 3.1.
    I have installed freshly & i am facing some problems in Central configuration manager .
    In Central Configuration manager only few contents like :
    Apche Tomcat 5.5.2.0
    OracleOraHome92HTTPServer
    WinHTTP Web Proxy Auto-Detective Service
    World Wide Web Publishing Service
    are coming rest all are not coming , can anyone help me to resolve this issue.
    Thanks
    Priyanka

    Hello Priyanka,
    I think you are looking for the server list.
    With BOE R3 and the introduction of the SIA the servers are managed be the SIA.
    If you need to see the serverlist go to the CMC or clicl in enable/disable server.
    I recommend to post further queries to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • LiveCycle/JBoss just dies after several minutes.  Have to rerun Configuration Manager

    I installed LiveCycle ES Turnkey with JBoss on a fresh install of WinXP Pro and it seemed to work flawlessly. I followed the turnkey install guide and it went without any problems. After the install I opened the LC Administrator Console and logged in with no problems. I changed the passwords and poked around a bit. It sat idle for a few moments and the next time I tried to do anything I get the standard Failed to Connect message as if I were trying to browse the web while not online.
    I've tried several things to bring it back to life -- restarting the service (it's 'JBoss for Adobe LiveCycle ES' right? it always fails to stop this service when I try to restart it.), restarting the whole machine, starting the server from run.bat in jboss\bin... nothing works. I have to run the Adobe LiveCycle Configuration Manager again to be able to connect to http://localhost:8080/. I've done this three times now and every time it's the same thing. It works for several minutes and then dies for seemingly no reason.
    I really appreciate any help I can get!

    Hello brianus
    If you have checked for Possible hardware or software conflicts, you may have a hardware problem.
    You sound like an experienced user that has done considerable troubleshooting, but you can consider How to test your iSight to ensure it is functional in case something there might help you.
    If none of those suggestions or Apple's How to Troubleshoot iSight helps you, your iSight will likely need repair by an Apple Service Technician. There are no user serviceable parts in iSight.
    Even if the iSight you bought was advertised as an NOS (new, old-stock) iSight, it may not be covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be interested in Apple's iSight Service: Frequently Asked Questions.
    EZ Jim
    PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

  • SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"

    Hi Team; I’m having 2 issues with SCCM 2012 R2:
    Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
    it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
    distmgr.log file.
    ~Package BDC00002 does not have a preferred sender. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
    ~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
    ~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
    ~SourceVersion (1) of package BDC00002. SourceVersion in database is 1. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
    ~Package BDC00003 does not have a preferred sender. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
    ~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
    STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
    ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002" 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
    StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00) 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
    CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
    P5=''  $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
    ~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
    ~SourceVersion (1) of package BDC00003. SourceVersion in database is 1. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
    STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
    ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
    AVAL0="BDC00003"  $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
    StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
     $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
    CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
    P5=''  $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
    CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX  
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
    Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
    ~Exiting package processing thread. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
    CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX  
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
    Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
    ~Exiting package processing thread. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
    Sleep 30 minutes... 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
    ~Used 0 out of 3 allowed processing threads. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
    ~Sleep 3600 seconds... 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
    Sleep 30 minutes... 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
    ~Used 0 out of 3 allowed processing threads. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
    ~Sleep 3600 seconds... 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
    ~Used 0 out of 3 allowed processing threads. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
    ~Sleep 3600 seconds... 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
    Sleeping for 60 minutes before content cleanup task starts.~ 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
    Sleep 30 minutes... 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
    Sleep 30 minutes... 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
    ~Used 0 out of 3 allowed processing threads. 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
    ~Sleep 3600 seconds... 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
    Sleeping for 60 minutes before content cleanup task starts.~ 
    $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
    Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
    on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
     the status is packages deployment compliance stuck at 0%
    Infrastructure:
    3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
    Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
    server is configured for each group respectively.
    A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
    Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
    is that I can't deploy the packages to production PCs in the Office subnet!
    Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
    I tried configuring IP Subnet Boundaries, still no luck!!
    Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
    <![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
    file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
    thread="4884" file="lsad.cpp:770">
    And here are the last 4 lines in the ClientLocation.log
    <![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
    Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
    <![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
    thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
    Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
    <![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
    date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
    It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
    While on the PC that the application was installed on I see the folowing in the LocationService.log:
    <![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
    Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
    date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
    date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
    Is there something wrong with the Distribution point on the Secondary Site server?
    Please help…
    Thanks..

    Update:
    I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
    However; the second issue is still unsolved...
    Please help..

  • When converting over to HTTPS and PKI for clients, not all actions are available in configuration manager cpl

    I'm not exactly sure which forum heading this should go under so if this isn't correct please let me know or move it on my behalf.  
    So I am trying to setup Internet Based Client Management in SCCM 2012 R2 and have come across a few articles on how to do so.   I think I have mostly gotten it to work but I seem to be having a client issue when deploying new machines.  My already
    deployed servers seem to have picked up the PKI setting no problem.  In the past when I would deploy a new windows client everything would be fine.  When i converted over to PKI in my test environment I am now having issues when I go to deploy a
    new windows client. I don't get all of the Actions listed in the Configuration Manager control panel.  All I have are Discovery Data Collection, Machine Policy Retrieval and Eval, User Policy Retrieval and Eval, and Windows Installer Source list Update
    Cycles, before all of them would populate no problem.  I have let this machine sit here for several hours and nothing has changed yet.  It does say PKI for client certificate.  Sometimes when I would deploy new machines it would say NONE for
    Client certificate.  In my production environment it says self-signed.  I have found if i uninstall the client and re-install the client it does populate all of the cycles but I don't understand why it is not working on deployment.
    Ok so maybe not all the time that when i reinstall the client it fixes it.  I just did an uninstall and reinstall on a test client and all it has under actions are machine and user policy cycles.
    Does anyone have any ideas?

    Hi,
    I think SCCM client installed before the GPO applied, so you don't a certificate available when it is required.
    You can export and import the certificate by using MDT integration, try this blog for PKI part:
    How To: Build and Capture in Configuration Manager 2012 using HTTPS
    And in addition, you can upload the log to your onedrive so you can share with us.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Unable to copy hidden package "Configuration Manager Client Package" to local DP

    Content status lists it as successfully distributed to all DPs (including the local site server)
    However, component status for SMS_DISTRIBUTION_MANAGER continually logs these events:
    Distribution Manager failed to process package "Configuration Manager Client Package" (package ID = CDW00001).
    Possible cause: Distribution manager does not have access to either the package source directory or the distribution point.
    Solution: Verify that distribution manager can access the package source directory/distribution point.
    Possible cause: The package source directory contains files with long file names and the total length of the path exceeds the maximum length supported by the operating system.
    Solution: Reduce the number of folders defined for the package, shorten the filename, or consider bundling the files using a compression utility.
    Possible cause: There is not enough disk space available on the site server computer or the distribution point.
    Solution: Verify that there is enough free disk space available on the site server computer and on the distribution point.
    Possible cause: The package source directory contains files that might be in use by an active process.
    Solution: Close any processes that maybe using files in the source directory. If this failure persists, create an alternate copy of the source directory and update the package source to point to it.
    NOTE: It appears to not be any of these causes.
    If I look at the smsdpmon.log on the server in question, the following is logged every half hour:
    Intializing DP Monitoring Manager...    SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    Getting monitoring thread priority SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    Getting content library root path SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    Getting site code SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    Getting algorithm ID SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    Failed to find algorighm ID from registry. Use default algorithm. SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    Getting DP Cert Type SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    Failed to find DP cert type from registry. Use default type. SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    Getting this DP NALPath SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    Failed to create certificate store from encoded certificate..
    An error occurred during encode or decode operation. (Error: 80092002; Source: Windows) SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    Failed to initialize DP monitoring object. Error code: 0x80092002 SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
    distmgr.log shows the following:
    STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BRICK-CONFIGMGR.corp.COMPANY.com SITE=CDW PID=2212 TID=2124 GMTDATE=Wed Jan 02 19:29:45.109 2013 ISTR0="CDW00001" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CDW00001"    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    Retrying package CDW00001    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    No action specified for the package CDW00001.    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    Start validating package CDW00001 on server ["Display=\\BRICK-CONFIGMGR.corp.COMPANY.com\"]MSWNET:["SMS_SITE=CDW"]\\BRICK-CONFIGMGR.corp.COMPANYNAME.com\...    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    Failed to start DP health monitoring task for package 'CDW00001'. Error code: -1    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    Updating package info for package CDW00001    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    Only retrying local DP update for package CDW00001, no need to replicate package definition to child sites or DP info to parent site.    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    StoredPkgVersion (2) of package CDW00001. StoredPkgVersion in database is 2.    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    SourceVersion (2) of package CDW00001. SourceVersion in database is 2.    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BRICK-CONFIGMGR.corp.COMPANYNAME.com SITE=CDW PID=2212 TID=2124 GMTDATE=Wed Jan 02 19:29:45.213 2013 ISTR0="Configuration Manager Client Package" ISTR1="CDW00001" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CDW00001"    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    Failed to process package CDW00001 after 41 retries, will retry 59 more times    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    Exiting package processing thread.    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:45 PM    2124 (0x084C)
    Used 0 out of 3 allowed processing threads.    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:50 PM    3784 (0x0EC8)
    Sleep 1825 seconds...    SMS_DISTRIBUTION_MANAGER    1/2/2013 1:29:50 PM    3784 (0x0EC8)

    Both errors are certificate related. Is there anything special about your configuration such as special ACLs on the certificate store or FIPS compliance mode (see
    http://support.microsoft.com/kb/811833) being enabled?
    Nothing special with certificates; I've used the basic stuff for intranet management of clients.
    The only related thing I can think of that may have affected this, is that I discovered earlier today that my MP installation got hosed (error 500) due to a broken client install on the site server itself. I uninstalled the client manually and the server
    (as indicated by the component status views) appears to have repaired the MP install. Perhaps it didn't repair it completely? Would a site reset do me any good?

  • Is there a way to configure managed properties on a superclass?

    Hi,
    I'm looking for a way to set a managed property on a superclass of a managed bean rather than setting it on every single managed bean extending that superclass.
    Here's a simple scenario. I've got an application scoped managed bean called "configuration" which holds (what a surprise) some configuration. It is configured like this:
         <managed-bean>
              <managed-bean-name>configuration</managed-bean-name>
              <managed-bean-class>myapp.model.ConfigurationModel</managed-bean-class>
              <managed-bean-scope>application</managed-bean-scope>
         </managed-bean>
    Now I want to use this bean from within some other request scoped managed beans (Let's say bean1 .. beanN). Of course I could inject the configuration bean into every single bean like this:
         <managed-bean>
              <managed-bean-name>bean1</managed-bean-name>
              <managed-bean-class>myapp.model.Bean1</managed-bean-class>
              <managed-bean-scope>request</managed-bean-scope>
              <managed-property>
                   <property-name>configuration</property-name>
                   <property-class>myapp.model.Configuration</property-class>
                   <value>#{configuration}</value>
              </managed-property>
         </managed-bean>
         <managed-bean>
              <managed-bean-name>beanN</managed-bean-name>
              <managed-bean-class>myapp.model.BeanN</managed-bean-class>
              <managed-bean-scope>request</managed-bean-scope>
              <managed-property>
                   <property-name>configuration</property-name>
                   <property-class>myapp.model.Configuration</property-class>
                   <value>#{configuration}</value>
              </managed-property>
         </managed-bean>
    The Java code of each bean would look like this:
         public class Bean1 {
              protected Configuration configuration;
              public void setConfiguration(Configuration aConfiguration) {
                   configuration = aConfiguration;
         public class BeanN {
              protected Configuration configuration;
              public void setConfiguration(Configuration aConfiguration) {
                   configuration = aConfiguration;
    One enhancement of this approach obviously is to define a super class for the beans which holds the configuration variable and its setter to prevent duplicate code. This would look like this:
         public class SuperBean {
              protected Configuration configuration;
              public void setConfiguration(Configuration aConfiguration) {
                   configuration = aConfiguration;
         public class Bean1 extends SuperBean {}
         public class BeanN extends SuperBean {}
    And now for the real problem. I'd like to use the advantage of using a superclass in the Java code on the faces configuration aswell. That means, I'd like to define the dependency injection only once for all beans extending SuperBean and not for every single bean. Probably like this:
         <managed-bean>
              <managed-bean-class>myapp.model.SuperBean</managed-bean-class>
              <managed-property>
                   <property-name>configuration</property-name>
                   <property-class>myapp.model.Configuration</property-class>
                   <value>#{configuration}</value>
              </managed-property>
         </managed-bean>
         <managed-bean>
              <managed-bean-name>bean1</managed-bean-name>
              <managed-bean-class>myapp.model.Bean1</managed-bean-class>
              <managed-bean-scope>request</managed-bean-scope>
         </managed-bean>
         <managed-bean>
              <managed-bean-name>beanN</managed-bean-name>
              <managed-bean-class>myapp.model.BeanN</managed-bean-class>
              <managed-bean-scope>request</managed-bean-scope>
         </managed-bean>
    Of course this doesn't work because JSF does not lookup superclasses automatically. But I would be grateful if anyone has a solution or an idea for achieving this, because it would notably simplify the faces configuration.
    These are the directions my own investigations took me so far:
    - Using an "extends" attribute: <managed-bean extends="superbean">
    This would be nice, but it would mean to use my own JSF implementation. I often use "extends" attributes on XML configurations, because it brings the pattern of inheritance with all its advantages to XML.
    - Right now I'm checking if a custom PropertyResolver could do the trick.
    Looking forward to your suggestions.
    Regards
    Frank

    There is no way in the default JSF implementation.
    You may consider to replace the getter by the outcome of FacesContext.getCurrentInstance().getExternalContext().getApplicationMap().get("configuration"); This will return the application scoped managed bean instance with the managed bean name "configuration".

  • HOW TO CONFIGURE MANAGER or APPROVER USER IN ACCESS REQUEST MANAGEMENT TO APPROVE OR REJECT REQUEST

    hi sap gurus,
    i configured grc 10 system successfully. I created one user: GR_AR_APP001 and assign following roles:
    SAP_GRAC_ACCESS_APPROVER
    SAP_GRAC_ACCESS_REQUEST_ADMIN
    SAP_GRC_FN_BASE
    SAP_GRC_FN_NUSINESS_USER
    and I maintained GR_AR_APP001 in access control owners as "POINT OF CONTACT", "SECURITY LEAD" and "WORKFLOW ADMINISTRATOR"
    but when i am creating access request for new user and defining MANAGER under user details tab as GR_AR_APP001.
    the user GR_AR_APP001 is not receiving any request for APPROVE or REJECT in his WORK INBOX.
    can u please guide me how to configure APPROVER or MANAGER to approve or reject request.
    I will be very much thankful if you guide me successfully.

    Hi Colleen,
    thanks a lot for your time.
    PIC1: I created one user: GR_AR_APP001
    and assigned all the GRC ROLES.
    PIC2: I assigned owner type to GR_AR_APP001 user : POINT OF CONTACT, SECURITY LEAD and WORKFLOW ADMINISTRATOR in NWBC ACCESS CONTROL OWNERS
    PIC3: I created one EUP 980 (copied from default EUP)
    PIC4: I maintained default manager as GR_AR_APP001 user in 980 EUP
    PIC5: I selected SAP_GRAC_ACCESS_REQUEST process id
    PIC6: I created one agent id as ZGRAC_MANAGER11 in which I added approver user id: GR_AR_APP001
    PIC7: I saved agent id
    PIC8: I added agent id as ZGRAC_MANAGER11 in stage5 in manager stage.
    PIC9: I saved
    PIC10: I maintained EUP 980 (in which I configured manager as GR_AR_APP001 user) in stage 5 task settings
    PIC11: Maintain Route Mapping, I clicked on next
    PIC12 and PIC13: I saved and activated.
    After this process I created one request for new account and selected the manager as GR_AR_APP001 and one request is created with request no 9000000030.
    now I logged into system by user GR_AR_APP001 and checked, there is no request under his work inbox.
    please guide me at least one procedure, how to receive request in approver work inbox so that I can learn other procedures to configure approver as per our organization requirement.
    thanks for your support Colleen.

Maybe you are looking for

  • Not getting all resolutions from webcam with getFormats() - why?

    Hey fellow Java geeks! I own a Philips SPC1300NC/00 which is a kick-ass webcam that can take up to 1.3 megapixel video/snapshots. Using Owen's code from http://forum.java.sun.com/thread.jspa?forumID=28&threadID=570463 it gives you a list of all avail

  • PDF output characters right hand side getting truncated using --PASTA

    H All, DB:11.1.0.7 Oracle Apps:12.1.1 O/S:Linux Red Hat 86x64 We are getting right hand side characters truncated for PDF output when Conc Prog is run through EBS.This is the problem. But while saving the file on dektop and printing both left and rig

  • Stored Procedure not excecuted successfully

    hy all i got the exception while calling the my stored procedure.from java code....can any one help me to what the issue is occurs ...for this exception... my procedure is executes successfully in sql server 2005 database.....but while calling from t

  • Total interface design in Captivate, not just "PPT slide"?

    I'm reviewing the possibility of using Captivate for a major project (>$200K). i've looked at the tutorial videos but.... 1. All the info is slanted at creaintg PPT-type slides for content. 2. For the purposes of this post, an e-Learning site is comp

  • How to change activities of a service notification using ABAP Program ?

    Hello friends, As part of a requirement, I need to modify a service notification activity "Activity Code" ( MTR Section ) data and for that I have used the standard bapi "BAPI_ALM_NOTIF_DATA_MODIFY" but the problem is that it is neither saving the ac