Configuration mm meterial number

Dear Gurus,
When do real time do it configuraion number range at the client level, at the time of
cutover activities, means what , and what will be handled in cutover activities?
MM - configuration , what have u do means , guide me pls.....
in enterprise what levels assignemt what are assigned  in the part of mm?
when get situation new document type creation, and assignment of no range?

Hi,
You can maintainthe No ranges at Realisation Stage.
All master data as described in Data Conversion Control Chart must be completed before the cutover activity starts.
-     Upload of all masters cut-off as on  will be completed '
The master data will be uploaded first on the Pre-Production client and on successful loading and confirmation; the same will be loaded in the Production Client.
Delta upload  if anything is there will be created between Periods.
The data upload will be performed centrally. Data will be received from all Project sites in identical upload formats created and circulated in advance for data collection.
Those that can and need to be entered in the system prior to the system release date i.e.
a.     Open Purchase Orders
b.     Stock Balance Upload
c.     Vendor Balance Upload
d.     Customer Balance Upload
e.     GL Balance Upload
·Unreleased POs will not be considered for upload
·POs will be uploaded with the open quantity only (i.e. quantity not yet supplied). POs with quantity fully received but invoice verification (bill passing) is pending will not be considered for upload
Stocks as on (Date) will be uploaded through data migration tool. The migration to·
Data for stocks for quality-cleared items will be uploaded using Movement Type 561.ols will be prepared and kept ready.
Broadly the cut over process for Financials will be categorized as follows:
·     Inventory Values
·     Open Items in Vendor Accounts
·     Open Items in Vendor Accounts
·     Open Items in Customer Accounts
·     Fixed Assets Masters and Values
·     General Ledger Accounts
·     Balance Sheet Accounts
·     Profit and Loss Accounts
Reward if Helpful
Regarsd
sanjay L

Similar Messages

  • I changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password

    i changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password..
    can anyone help me to solve this issue

    i just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
    So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating.  I have been asking and no one knows what to do.

  • Config settings to configure PO doucment number as storage bin coordinates.

    Hello,
    For example, for a goods receipt, you can set up the system to use the purchase order number as the storage bin coordinates in the interim storage area for goods receipts.
    Please provide config settings to configure PO doucment number as storage bin coordinates.
    Regards,
    Aravind

    Hi .
    Go to config -  SPRO -> Logistics execution ->warehouse management ->activities ->transfers ->define movement types
    choose warehouse number and movement type (as 101)
    here you can enter source cordinates and destination cordinates
    Hope it helps
    Jinoy

  • Error:configuration of serial number  1pm0hm incompatible with document num

    Hi Guys,
    When i enter a serial number in the delivery document, i get an error message saying
    "configuration of serial number  1pm0hm incompatible with document number "
    The material has serial number profile maintained in it and it is a configurable material...
    But i m not sure why this error message is showing up
    Please suggest....
    Thanks
    Anand Viswanathan

    Hi Anand,
    Please go to IQ02 --> Select the 2nd last Tab page "Configuration data" --> There you can see the material in the feild "Configurable material" --> Please check the boxes (Refrenced or Individual) --> mark it as per our requirement.
    Then click on Display and See whether system shows the charaterstics or not?
    Please try and revert back with your findings.
    Also tell what exactlythe status of your serial number,It should be ESTO SLOR.
    Hope this helps,
    Regards,
    MT

  • How to get Configuration (internal object number) during MM01

    Hello Masters,
    Does anyone know how to get the value of Configuration (internal object number) during MM01 so I can use the function VC_I_GET_CONFIGURATION to get the configurable variant values. I tried to check the MM01 exit EXIT_SAPLCUKO_001 include ZXCUCU02 and it' there but I need to know how to get it so I can use it because in other exits it's not included in the local variable.
    Thanks,
    Alfred

    pl. share the answer with us. U can copy and paste that answer.......so that, some one get the solution, who r hving the same issue.
    thanq

  • UCM Routing Client doesn't appear when configuring a Dialed Number in Configuration manager

    Dear all,
    I am implementing a UCCE system version 9.0
    When I am trying to configure a Dialed Number in Configuration Manager, the Routing Client field is empty, it doesn't show the UCM option.
    Kindly can someone help me on this issue, what should I check? is there something missing in the configuration?...
    Any help would be greatly appreciated.
    Thank you in advance.
    Lara

    ICM Config Manager > Tools > Explorer Tools > PG Explorer
    Do you see a PG and PG Peripheral for UCM? If so, select the Peripheral and go to the Routing Client tab. I've attached a picture of what a healthy functioning PG and PG Peripheral would look like from the Routing Client perspective. 

  • Configuring my phone number error

    i downloaded this app called magicjack.it shows: my number: configuring my phone number error status: network connection failure {error 20} version:3.6 what should i do?

    Contact Magicjack. That is not an Apple app, so the developer will need to give you support.

  • How do I configure my Phone Number in Messages? 10.8.2 iOS 6

    I've my gmail, my hotmail configured in Messages but I cannot add my phone number so whenever someone messages me, I can respond in my Macbook Pro OS X (10.8.2 and I have an iOS6 iPhone).
    Thanks in advance!

    HI,
    Do you have the iPhone that has the number that is currently Listed in Messages on the Mac ?
    If so then go to Settings > Messages > Send and Receive and remove the Apple ID.
    Restart Messages on the Mac.
    IS the Number still there ?
    If so then in the Finder > Go Menu > Go to Folder type ~/Library/Preferences in the dialogue box that appears.
    In the Preferences find com.apple.imservice.iMessages.plist and com.apple.imessages.bag.plist and drag both to the Trash
    Restart Messages.
    These two .plists hold the Server Login info and the "Aliases" IDs (Emails and iPhone Numbers)
    Restart Messages (Again).
    Now on the new iPhone Add the Apple ID you are using in Messages on the Mac ? (In the Send and Receive spot)
    Allow a few minutes and Restart Messages if it does not show an Alert type message from the iMessage Server saying the iPhone is using the Apple ID and phone Number.
    9:56 PM      Wednesday; February 20, 2013
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How to find hardware configuration via serial number

    I need to know the model number for the hard drive in my powerbook. The powerbook won't power on at the moment. Is there any way I can look up the serial number and find out what hardware was installed in it? It is a 100 GB drive and the computer was custom ordered.
    Thanks!

    HD: My guess is that unless you are truly expert and have a comprehensive set of specialized miniature tools at your disposal, there is almost no chance that you will succeed in what you propose to do. I suggest that before you tackle the mechanical parts inside your failed drive, you consider swapping the controller board on the outside of it. A failure of that board can render a drive just as inert as a mechanical failure inside it, without disturbing the data stored on the platters at all. A failure of the internal mechanicals, if that's what has occurred, is more likely to have irretrievably destroyed some or all of your data, so that you couldn't recover it even if you were successful in the extremely delicate task of removing the platters and placing them in a new case. If there has been no mechanical failure, replacing a failed controller board with a good one may restore all your data to accessibility without jeopardizing its integrity at all in the process. Changing the board would be a much less intrusive and far safer first step toward recovering your data than tearing down the drive's mechanicals, and it might prove to be all you need to do.

  • Apple configuration miss reporting number of paid apps available

    AC reports I have 3 codes left to redeem out of 40 and indeed I have three machines needing to load App on.  But when I double click on the 3 remaining I am shown a list of codes and their status.  It shows correctly which  iPads have which code but it claims that the 3 remaining codes have already been redeemed.
    This happened once before with 1 code out of twenty and I simply bought one new code on VPP and it installed.  I now realise this has happened again and I should have pursued this then.  My fear is this is going to be a regular event.
    What to do?

    https://discussions.apple.com/message/23789388#23789388

  • Configure prompt resticting number of months of data to be displayed

    Hi,
    I have the following reporting requirement:
    Dashboard Prompt:
    Month_Start_Date:
    Week_Start_Date:
    Depending on whether user selects month or week create another filter such that for month it should have values 1,2,3,4
    and for week 1,2...13
    This implies that the report can show a maximum of 4 months data or 13 weeks of data.
    for eg. if user selects
    jun-09
    3
    Then the report should show:
    Dim1 jun-09 Jul-09 Apr-09
    Measure1 Measure1 Measure1
    Could you please help in create this prompt and report.
    Thanks and Regards,
    Parn

    Can we have ur screens hots of the app before upgrade and after upgrade.
    As per my knowledge of WDJ, SPA by default always had Overview screen and, users had option to click edit and fields will show up for edit.
    For making read only we have to make explicit changes, from personalization or from self service admin role etc. May be ur team did some explicit changes through personalization and self service admin role.
    To make the fields readonly etc, you can try in these ways:
    1. Personalization
    2. From V_T588MFPROPC settings
    3. V_T7XSSPERSUBTY for the infotype you have to check "Data must be displayed in read-only"

  • Configuration of external handling unit number range

    Hello everyone,
    I am working on a project that includes receiving of handling units from outside of our SAP system in EAN128 format, and am running into some challenges in setting up an appropriate external handling unit number range.  The process will involve creation of an inbound delivery from an advance ship notice, with the delivery to then be packed based upon handling unit information in the ASN.  I have set up an external number range interval in the number range object that is being used for generation of internal handling unit numbers, with the external interval being outside the range of the existing internal intervals.  When the ASN is posted, the inbound delivery is created but cannot be packed (status 52), and I get a message stating "The check digit of SSCC 10000001000001648 is incorrect. 5 is correct" (just using this number as an example).  In this case, the HU number actually had a leading zero, and changing the sample HU to start with a 5 results in the same message but stating that 0 is correct, which is kind of maddening.  The bottom line is that I have not configured an external number range before for handling units and am clearly missing something here.  Has somebody set this up successfully and can share your experience, or can point me to some good documentation?  I am searching OSS, the Business Process Expert Community, and the overall web in general and am not finding any relevant information.

    Per your info,
    in std, You cant maintain HU number ranges with respect to year.
    Still if you want to maintain, You have to use Userexit for Number ranges.
    Generally, all sales documents number ranges are not year specific . ONly FI documents are year specific.
    Why you want to have Year specific number ranges for HU's? - It is nothing to do with Year.
    Convince your client, This year dependant HU number ranges doesnt carry any value addition. Still client insists, only way to achieve this is "USEREXIT_NUMBER_RANGE"
    hope it helps

  • Configuring "Scan To E-mail" on HP Officejet Pro 8600 Plus N911g

    This is the same issue reported by several other users in this forum to which no solution has been provided.
    I have been unsuccessful in setting up the scan to e-mail option for a HP Officejet Pro 8600 Plus N911g purchased on August 12th 2012 and using the firmware CLP1CN1150CR.
    I am trying to do this through the Embedded Web Server interface to the printer from an iMac running Mac OS X 10.6.8 and HP Utility 5.8.0.  More specifically the page under "Scan -> Scan to E-mail -> Outgoing E-mail Profiles".
    I have tried 2 different SMTP outgoing servers, each of which works well to send e-mail from the computer: Apple iCloud e-mail service (formerly known as Mobile Me, formerly known as .Mac) and AT&T Net e-mail service.  I verified that the server name, port number and authentication login/password values were all correct.
    When scan to e-mail is used from the printer, I get an error message:  Cannot connect to server.  Check server name and address.
    When tested from the computer during the setup of an outgoing e-mail profile, I get an error message:  The device could not send the test e-mail message. (EmailAccounts-timeout).
    When I try to configure the page under "Settings -> E-mail Alerts -> E-mail Server" and use exactly the same values as the ones in the outgoing e-mail profile above, the Save and Test option fails with an error message:  The device could not send the test e-mail message.
    Interestingly enough, I am able to use the computer's e-mail client with the option Scan To Computer -> E-mail as PDF or E-mail as JPEG.  With this option, the file is scanned and added as an attachment to a mail message from the Mail client under Mac OS X.  When I press the Send button, the e-mail is sent successfully through the same SMTP server.
    All the error messages seem to indicate that the printer's e-mail client software is unable to establish a connection to the SMTP server.  However, it is not clear what configuration parameter is the one that could be causing the problem.
    This question was solved.
    View Solution.

    After further research, I noticed that there are other possible default Simple Mail Transfer Protocol (SMTP) port values:
    Port 25 is the standard SMTP port number.
    Port 465 is the port number for SMTP over SSL, Secure SMTP (SSMTP).
    Port 587 is the dedicated port number for a Mail Submission Agent (MSA) that uses a variant of the SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the mail submission service.
    I had been using port  number 25 as this is the standard one.  However, all tests were failing.  Hence, I decided to try the tests with ports numbers 465 and 587.
    Port number 465 failed with the same errors listed above.  However, the tests passed with port number 587.  After saving the successful configuration with port number 587, I tried the scan to e-mail option from the printer and it worked.
    A mail submission agent (MSA) is a computer program or software agent that receives electronic mail messages from a mail user agent (MUA) and cooperates with a mail transfer agent (MTA) for delivery of the mail.
    Historically in Internet mail, both MTA and MSA functions use port number 25.  However, many Internet Service Providers (ISPs)  and enterprise or institutional networks restrict the ability to connect to remote MTAs on port 25.
    With a dedicated port 587, it is always possible for users to connect to their domain to submit new mail.  Availability of a MSA on port 587 enables nomadic users to continue to send mail via their preferred submission servers even from within others' networks.  Using a specific submission server is a requirement when sender policies or signing practices are enforced.
    I know that many users may find the technical details boring or confusing, but I just wanted to include some background to those who actually care about this level of detail.  I also wanted to provide a possible solution to other users who are experiencing the same problem.
    So, in a nutshell, if the Scan To E-mail option is not working for you using port number 25, then try one of the other SMTP port numbers listed above.  If none of them work, check your mail provider for other possible outgoing server port numbers.

  • Apple Configurator 1.0.1

    The Apple Configurator 1.0.1 update is available from the Mac App Store.
    This update improves overall stability and performance and addresses a number of issues, including the following:
    Enterprise apps packaged as .ipa files are imported and installed correctly.
    Redemption codes for apps that contain a comma in their title can now be imported.
    A redemption code may be reused to install an app on another device if the original device is unsupervised and erased by Apple Configurator, or if the app's installation did not complete on the original device.
    The redemption code used to purchase an app in iTunes may also be used to install the app on one device with Apple Configurator.
    The number of redemption codes remaining for an app is now displayed correctly.
    Notes and bookmarks entered into iBooks and iTunes U are deleted when a backup is restored to a supervised device.
    The WPA2 password is saved when editing a Wi-Fi profile payload.
    The name of a stored backup is saved when edited.
    The storage capacity of an 8 GB iPod touch is now displayed correctly.
    The "Erase all contents and settings" checkbox on the Prepare pane has been relabeled "Erase before installing".
    Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.

    Oh well,
    Today, I phoned Apple Education / Enterprise / Apple configurator people who claim that by article
    http://support.apple.com/kb/ht5437
    You can only configure two things.
    "Apple TV supports Wi-Fi and Certificate payloads for configuring network access, including proxy and 802.1X settings.'
    It reminded me that living at the cutting edge meant eating thin slices :-)
    I'm sure it will get better and beefier with time.
    Francois.

  • Accounting document number in Po

    Hi
    when ever  completing goods receipt accounting document created, Is this possible to configure accounting document number
    show in purchase order history me53n t.code, showing like that goods receipt and invoice number,plz suggest
    Regards
    Sam

    Hi
    when ever completing goods receipt accounting document created, Is this possible to configure accounting document number
    show in purchase order history me53n t.code,
    1)accounting docuement will not come in Po history its FI docuement and second its generate at heade level
    2)ME53N is display purchase requestion ,if you want PR history whethere po is create or no,t grn happen or not and invocie happen or not
    you can see this on status tab in PR ans select layout button on this change requierment as per your requierment
    note: in PR you will get Po number only and GRN and Invoice status and its posting date you will get ,not docuement number beacse ir po base not PR base
    Regards
    Kailas ugale

Maybe you are looking for

  • Local vs. Remote Response Why such a delay?

    I'm trying to find out why there is such a difference in query finish times and how to improve the time. ftp is fast between the machines. The network folks say everthing is ok there though the sniffer sees many Parses. Changing the arraysize in SQL*

  • How do i map from file name to the device it resides on

    hi i need to find a way to map from a file name to the disk device it resides on( so i can do ioctl to that device ). i know that stat(2) returns a dev_t value, but i don't know how to translate from that dev_t to the device name( e.g. /dev/dsk/c0d0.

  • Extra Phantom display reported

    I've tried a search but I'm not sure how to phrase this problem. I have a 2006 mac pro with 2 x NVIDIA GeForce 7300 GT installed from new. I have always run 3 monitors, a 20" Viewsonic LCD in the middle and 2 x 19" CRT's either side (Samsung on the l

  • Text Dataload from Flatfile

    I have an info Object,I am getting 01 key and Name Description in that Text table, I have another key 1 description Name2 I want load the text using flatfile,is it possible  to load the text data to that info Object,my IO is char(2), Ex: 01 Name 1  N

  • How to run os command from oracle 10.1.0.1.0 plsql.....

    hi, is any one able to resolve my problem. thanks in advance my problem is that i want to run os command (dir/b to get list of all files and directory names) using oracle 10.1.0.1.0 plsql. what will be the code snippet in oracle plsql. if any one hav