Configuration needed for SOA ,BPM,OSB,BAM

HI,
Could any one suggest best configuration System to run all SOA products parallayly as shown below..
SOA ---? (eg.2GB RAM)
BPM--?
OSB---? (1GB)
BAM---?
Database ---? (ForMeta data repository)
do we have 64 bit software for above..I could see only 32 bit version in Oracle download page?
Thanks
Sivakumar
Edited by: siva p on Jun 23, 2012 12:11 PM

Hi Siva,
I have ran all the softwares on my system with 8GB but had issues running all of them at the same time. I would say, go with 16 GB (6-8 cores) system in DEV.
SOA ---? (eg.2GB RAM)2GB for DEV
BPM--?2GB for DEV
OSB---? (1GB)2GB for DEV
BAM---? 1GB for DEV
Database ---? (ForMeta data repository)1GB for DEV (use XE database); you would require 2-3 GB if you want to run Oracle 11g DB
do we have 64 bit software for above..I could see only 32 bit version in Oracle download page?All the softwares are available in 64 bit and you can download them here: http://www.oracle.com/technetwork/middleware/soasuite/downloads/index.html
Thanks
Sivakumar
Edited by: siva p on Jun 23, 2012 12:11 PMHope this helps!
Cheers,
NJ

Similar Messages

Hardware Configuration recommendation for SOA/BPM/OSB 11.1.1.5 Cluster

Hi,
Want to find out what is the recommended hardware configuration including Memory on the box. Trying to install a 2 Node Cluster of SOA 11.1.1.5 with SOA/BPM, BAM, OSB part of the same domain. All binaries to be installed on a NAS. OS is HP-UX. How much memory is ideal on each box if running SOA Service / BPM workflows and processes,BAM,OSB, Custom ADF Task Flow Apps with a large number of transactions. SO wondering what is an ideal configuration. IS there a matrix or a some kind of spreadsheet to come up with the numbers.
Thanks

Unfortunately there is no simple way to figure this out. The recommendation varies on the basis of multiple factors (from load to avg size of the payload). Please contact your local Oracle Sales Representative and they should help you out in identifying the best possible configuration/sizing for your system.
Regards,
Anuj

Configuration needed for SOA call to create PO in classic scenario

Dear Experts,
We are working in the SAP SRM 7.01 with backend system on ecc 6.0 Enhancement pack 5. The scenario configured is classic scenario.
I want to know what are the configurations needed to use SOA calls to create a purchase order in the backend system.
In the system landscape directory, when I use the system type "ERP_3.0" for backend system, the system uses the BAPI 'BAPI_PO_CREATE1' to create a purchase order in the backend system.
When we use the system type "ERP_4.0", it does not use the BAPI 'BAPI_PO_CREATE1' to create purchase order. It tries to use SOA calls to create PO in the backend system. However, it fails to create one.
Could you please let me know what are the settings we need to do to create a purchase order in the backend system?
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hi Vardhan,
Can you be a little clear? are you using PDP scenario as in your requirements are coming as PR from ECC into SRM as SC? Is this the scenario?
Regards,
Nikhil

How to configure SSL for SOA BPM/Webcenter 11.1.1.3

Hi,
I have installed BPM 11.1.1.3 and Webcenter 11.1.1.3 in the same HOME. First installed BPM and then extended the domain for webcenter. During the installation I selected the SSL check-box also. Now how do I disable the HTTP and enable only HTTPS. I need to configure SSL can someone please provide some steps or a link to some document around SSL configuration of BPM/Webcenter 11.1.1.3.
Thanks

Hi,
Anyone I too am looking for the same info.
Thanks

Is SOA Essential training needed for SOA Suite 10g: Services Orchestration?

Is SOA Essential training needed for SOA Suite 10g: Services Orchestration? or Should I proceed with Services Orchestration?

No, essiantials is just a two day high level overview. The 5 day training is in-depth training on the SOA suite. I advice to do 5 day training.
Marc
http://orasoa.blogspot.com

Configurations needed for Proxies.

What are the all configuration steps for using a Server proxy.?

Hi Soumyasanto Sen ,
Proxy generation converts non-language-specific interface descriptions in WSDL into executable interfaces known as Proxies. Depending on the target programming language, you choose one of the following:1. Java Proxies. or 2. ABAP Proxies.
We can interface to XI through proxies. From WAS 6.20, proxy generation feature enables application systems to communicate with XI using proxies. Proxy generation enables you to create proxies in application systems. Proxies encapsulate the creation or parsing of XML messages and the communication with the relevant runtime components required to send or receive the messages.
There are two types of Proxies.
1. Java Proxies.
2. ABAP Proxies.
Java proxies are used when java applications needs to send and receive data and ABAP proxies are used when ABAP applications needs to send and receive data.
The following websites contained detailed explanation (PDF & PPT docs) on Configurations needed for Proxies:
Proxy Generation
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
To activate ABAP proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Detailed step-by-step solution for ABAP proxies in XI
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
How to push data from BI to XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
How to push data into BW from XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
cheers!
gyanaraj
****Pls reward points if u find this helpful

Architecture/design templates for SOA-BPM?

Dear All,
Can anybody point me towards architecture and design templates for SOA-BPM?
It can be platform-agnostic, say from general BPM standpoint; and/or customized to cover product-specific considerations e.g. SOA Suite 11g or OBPM 11g. A logically structured one covering both would be too ideal.
regards,
sibendu

You may find some useful stuff among the documents in the IT Strategies from Oracle library. Much of the content is vendor-neutral, and there are a number of reference architectures. The focus is on enterprise architecture, but SOA and BPM play a significant role. It's all free to registered OTN members.
Check it out: http://www.oracle.com/technetwork/topics/entarch/itso-165161.html
Edited by: Bob Rhubart on Feb 22, 2011 2:44 PM

Configuring SSL for SOA Server

Hi All,
I wrkin on SOA suite 11g. I am tryin to implement transport level security. Firstly 1-way authentication and than 2-way mutual authentication. For that I need to enable the SSL for SOA server which is managed by the WLS admin server. As per my knowledge the WLS comes with demoidentity and demotrust keystores. If I need to configure the SSL for SOA server do i need to create new keystores and CA,s or I can use the demo keystores.
Now, in case i need to create new keystores than can i do the same using keytool utility. Additionally, is it possible to make CA using keytool utility? If yes, kindly provide me some links about how to do the same.
Thanks in advance.

Hi Shomit,
If I need to configure the SSL for SOA server do i need to create new keystores and CA,s or I can use the demo keystores.You can use the Demo keystores for dev purpose but it is NOT recommended to use demo keystores for production use.
in case i need to create new keystores than can i do the same using keytool utilityYes, you can do it using Keytool utility.
is it possible to make CA using keytool utility?Actually you can generate a self-signed cert and use that as a CA for signing CSR's.
kindly provide me some links about how to do the sameYou should get everything here -
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13707/ssl.htm#i1200848
Regards,
Anuj

Requirements for JDBC Driver needed for SOA 8 }connection pool

Hi,
I have an AS400 jdbc driver. This driver is JDBC API version 2.x. Also is a Driver Type 4.
What are the requirements of a JDBC Driver needed for connection pool in SOA 8?
Thanks.
Lorenzo Jimenez

You can use pretty much any jdbc driver, including type 2 and type 4.
You need to make sure your shared libraries needed by the driver are available to the appserver when you boot.
Other than that, it is no different than configuring any other driver.

Any special configuration needed for Print PDF?

To print as PDF is there any configuration needed to be set.

Hi,
the only thing to pay attention is when you have to print large PDF and you receive this error: AGEGTYVF.
Refer to this doc in the Oracle Support: Printing A Large OBIEE Answers Report Or Dashboard To PDF Fails With Error Code: AGEGTYVF
Regards,
Gianluca

Configurations needed for distributing central contract to backend system

Dear Gurus,
I have configured central contract and getting approved in the local SRM system. Now, I need to distribute the central contract to the backend system. I have already get the PI interfaces configured using the integration scenario Central contract management.
Now, I assign the backend POrg as well as the target values for the backend contract and try to release the central contract. The central contract is getting released. However, no contract is getting created in the backend system.
I donot see any XML messages generated in the SRM system (SXMB_MONI).
Do I need to maintain some settings in the SRM system to enable the distribution of contract to the backend system?
Thansk and regards,
Ranjan

Hi,
When one creates Local Contract; there is one option named 'Distribute' on contract screen.On drop down; one mention back end system. After clicking on it; contract has been created in ECC.
If contract is not getting generated in back end; refer SAP Note: 609222.
Check whether you find any error/information message in Txn BBP_CTR_MON.
SRM Settings:
1. Implement BBP_DETERMINE_LOGSYS: Determines whether contract is to be created in SRM or ECC.
2. Assign transaction type to attribute CT_PROC_TY in Org Structure.
3. Check whether have maintained message type BLAREL, COND_A, BLAORD.
4. Assign role SAP_BBP_STAL_START_PURCHASER to process contracts.
Helpful SAP Notes: 641919, 646903
Regards,
yaniVy
reward if helps

Configuration needed for setting revaluation of activity type rates

Hi,
I'm not sure about the obligatory settings I should make in order to configure revaluation of activity type rates.
I know that I have to set sth in Plan version and that I have to fill the Activity Type master data in a different way than if I used them without revaluation.
Can you tell me about the settings I should make?
Thanks and regards,
Karol

Hi Karol
Yes u r right u need to first set in plan version and after that its the client's discipline on transaction entry that drives this requirement.
1) If the transaction data is not posted correctly then activity hours will be vague and distorts the price.
2) You can do manual activity posting but that does solve the purpose.
3) Also u can correct activity hours posted for all orders in the system during month end, this also is a huge activity depending on the number of orders
4) Now if u wish to do price calculation thru system u need to decide on two aspects
One - plan ur costs for both activity dependent and activity independent
If your cost center has more than one activity being performed u need to do either cost splitting or enter equivalence numbers while doing activity planning
5) If u wish to hve prices calcualted by system, then during month end u need to run actual cost splitting and then do actual price calculation
6) Then u need to revaluate all your orders with actual activity prices
Hope the above clarifies - do assign points as a way to say thanks

Configurations needed for Transportation Lane

Hi Gurus,
Good Day! I would like to know what are the needed configuration in R/3 and APO so transportation lane are automatically created in R/3 once Scheduling Agreement or Inforecord is CIF in APO.
Appreciate any help.
Thanks and Best Regards,
Raymond

Hi Raymond,
No Specific Configuration is required. Following are the steps required to CIF Scheduling Agreement or Inforecord to APO as TLanes.
1. Activate integration model for recieving location and issuing location or vendor for which you want to CIF the Sched. Agreement or Inforecord.
2. Activate Product-Location Integration model with the material required for Inforecord or Sched. Agreement.
3. You need to activate the Integration model with valid IR and Sched. Agreement.
The same will be CIFed to APO as external Procurement relationship/TLane. You need to assign Means of Transport if not otherwise assigned.
Hope this answers your query.
Regards,
Manjit

Analog Lines to E1 DID/DOD configuration need for CCME

Dear,
I have one of our remote site have the following configuration:
* 2 X CCME running on C3845.
* 1 X CUE installed on one of the C3845
* Around 70 IPT (7910, 7941 & 7941) registres in the CCME.
* 8 * analog lines connected to FXO ports that provide land lind connectivity for the site.
* 4 * FXS ports to provide FAX.
and becasue of unstability issue with the out/ingoing call we requested 4 X voice E1 DID/DOD. and want to know what is the required configuration to consider in migrating my remote site.
regards

Hello, thanks for your responses helped me very much.
I have the commands and errors completes:
When I enter the command:
ds0-group 0 timeslots 1-15,17-25 type r2-digital r2-compelled ani into the controller e1, I receive this error:
% Not enough DSP resources available to configure ds0-group 0 on controller E1 0/0/0
% The remaining dsp resources are enough for 20 time slots.
% For current codec complexity, 1 extra dsp(s) are required to create this voiceport.
This the inventory in the router:
GW-VOSS(config-controller)#do sh inv
NAME: "2821 chassis", DESCR: "2821 chassis" PID: CISCO2821         , VID: V05 , SN: FTX1336AHFS
NAME: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1" PID: VWIC2-1MFT-T1/E1 , VID: V01 , SN: FOC133129NF
NAME: "2nd generation two port FXO voice interface daughtercard on Slot 0 SubSlot 1", DESCR: "2nd generation two port FXO voice interface daughtercard"PID: VIC2-2FXO         , VID: V02 , SN: FOC13332NDZ
NAME: "3rd generation two port FXS DID voice interface daughtercard on Slot 0 SubSlot 2", DESCR: "3rd generation two port FXS DID voice interface daughtercard" PID: VIC3-2FXS/DID     , VID: V01 , SN: FOC132526S0
NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP S IMM with four DSPs" PID: PVDM2-64          , VID: V01 , SN: FOC13341ZE1.
I have the transcoding:
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 15
associate application SCCP
I have CUCM 7.0, Contac Center 6.0, SIP trunk, 1 E1.
I need another PVDM card? The router can be have two PVDM card? Which PVDM card you recommend ?
Regards

Configuration needed for Installing Oracle 9i-R2 on Linux Itanium

I need a specific documentation for Installing Oracle 9i-R2 on Linux Itanium server.

Oracle does not support running the 32-bit database on Itanium.64-bit Oracle database software only supports 64-bit for Itanium.
Check Metalink Note:266043.1 for details
Virag

Configuration needed for SOA ,BPM,OSB,BAM

Similar Messages

Maybe you are looking for