Configuration not saving

My DVDSP4 is acting very strange. On startup, it always asks me to choose Application defaults, even though I have Show at startup unchecked. I choose my desired configuration, click OK, and then the Choose Defaults window goes away and comes up again. I do the same thing again and then the application starts. This on its own would only be a minor annoyance. The real problem is it will not save my custom config. If I open up the same project I created and saved the custom config in, my config is used. However, any new project I begin not only doesn't use my config, but it doesn't even show up as a saved config in manage configurations. It's just gone! AAARGH! Then I have to move all my windows around again. If anyone can tell my why this is happening I would greatly appreciate it. Hopefully it's just something simple I'm not doing and not a problem with 10.3.9

i have the same problem but i reboot and save config the device after months when i got the 0 access points supported on WLC after reboot all the new configuration weren't saved only the old configuration from 2 to 3 months old
and on AP i got the max no. of ap has reached
and those AP that dis-joint were joint to wlc a day before
the wlc supported 50 ap only 7 are joint and 11 were disjoint after 2 months

Similar Messages

FACT SHEET Configuration not saving in transport to move to QA system

hi Experts
I am setting up the Account Fact Sheet BP_ACCOUNT_FS for my users and the only configuration that is saving is the configuration of the layout of the fact sheet to a transport. The actual settings or configuration within the fact sheet is not saving. For example, I used a BI report and added my query and parameter and while this saves in our development box, this will not save in the transport to move up through the systems.
Any thoughts? I already have a message open with SAP but checking to see if anyone has an immediate solution.
Thanks,
Chris

Hi,
P-table is an time independent attribute table ie it contains all the attribute info. in that table. so when u added a characteristic to that infoobject, u can find that entry in the P-table.
Also M is a view on P & Q tables. It is not a table.
T- ie Text table will contain only short,medium and long texts related to that info object.
so when u add a characteristic to infoobject it will be refelcted in P-table or Q- only. Not in Text tables.
Narendra Reddy

Configurator not saving changes (Web Content)

Hi.
I am new to configurator.
I have applied a base profile (many different settings) together with a separate profile for restricted websites.
The base filter's 'Web Content Filter' is not set.
The 'TwinsWebFilter' only has one payload ...the Web Content Filter.
I have two issues.
1. I can limit to Specific Websites. I add http://www.bbc.co.uk to the list and apply. This seems to filter all sites except the BBC (good) AND Apple.com. It does not seem to block Apple.com even though it is not in the whitelist. How do I block it? How do I know what other sites have not been blocked?
2. When I double click on the policy within the 'supervise' panel, it opens for editing. I click on the 'Web Content Fillter' and it shows that it is back to 'Limit Adult Content' ... even though I had saved it as specific websites only. When I choose the 'specific' option, I see the site (BBC) that I has already added. I am obviously concerned that when the iPad is refreshed next time, it will be refreshed to the 'adult' section without my knowing. Are there any other profile setting that may conflict with my choice of 'Specific sites only'?
Thanks.

HI Lee,
I am facing the same issue.
Were U able to resolve this Or any work around ?
_vishal

Inital configuration not saving in WLC 5508

Hi Team,
We having some issue with the wlc 5508 after configuring the initial setup it saved and ask for reboot but after it reboots again it is asking for the initial configuration again.
It is repeating the same
Please help on this issue.
Regards,
Arun

i have the same problem but i reboot and save config the device after months when i got the 0 access points supported on WLC after reboot all the new configuration weren't saved only the old configuration from 2 to 3 months old
and on AP i got the max no. of ap has reached
and those AP that dis-joint were joint to wlc a day before
the wlc supported 50 ap only 7 are joint and 11 were disjoint after 2 months

Error while configuring GCM: The push settings were not saved. Error 400

Hi,
While configuring push settings for google cloud messaging in azure mobile services, i entered the server key received from google developer console.
When i try to save the entry, i get the message The push settings were not saved <mobile-serversices-site>: Error 400
I have regenerated the key multiple times but of no use.
Am I missing something? I am a paid subscriber of Azure
Thanks, Laks.

Sorry for the late reply. Sometimes there are transient errors in the portal that affect whether or not the settings can be saved. Also, you should make sure that you have an associated notification hub (which will show up in your push settings). If there
is no associated hub, you will always get errors when trying to configure.

Configurations are not saved on Aironet 3602E

I tried configuring snmp string on aironet 3602E. It gets configured but movement i restart the AP, configurations are not saved. I tried using write memory command but no use.
Kindly assist

You can't. Things are handled by the WLC.
Q. Can a LAP AP handle SNMP messages like an IOS AP?
A. The LAP APs cannot handle SNMP messages on their own. In order to handle SNMP messages, you should configure an SNMP community on the WLC to which the LAP is registered. All the AP information is managed by the WLC.
Scott

Configuration setting not saved

hi,
When i receive configuration setting for web beowsing on my mobile from my service provider.I get a message " trusted server setting received but not saved.message could not be authenticated and deleted."So i am unable to browse the web.Please help me .

You seem to have deleted the settings message from your service provider. Contact them and ask them to send it again. This time after you receive it you need to save it and it should auto install. Also sometimes there is a password to save it. If there is, the service provider usually sends you a separate message with with it.

What is the command to verify the configuration that are not saved or sent to local controllers?

Q: What is the command to verify the configuration that are not saved or sent to local controllers?
A: We can execute the command that is shown in below image to check the status of the configuration that has been made.
Note: For example I made changes to the default VAP profile and executed the command "show master-configpending" which shows the pending configuration to be saved/sent to local controllers.

But that jar file loads without images and icons when it is in other directory.Images should be accessed via a URL rather than using a filename because they will exist as entries in the jar archive not as files. Typically this URL would be obtained by using the Class method [getResource()|http://java.sun.com/javase/6/docs/api/java/lang/Class.html#getResource(java.lang.String)]. There are details in this [Java World article|http://www.javaworld.com/javaworld/javaqa/2002-11/02-qa-1122-resources.html].

HT1386 I am trying to restore the last configuration I saved for my iPhone but iTune is asking for a password although I did not set any. What shall I do?

I am trying to restore the last configuration I saved for my iPhone but iTune is asking for a password although I did not set any. What shall I do?

No there's not. Otherwise that wouldn't be very secure, would it?

Mail 3, smtp, IMAP: sent messages are not saved on server

Hello,
I had problems using Mail 3 after I upgraded to Leopard, so I used Thunderbird for the time being. With the update 10.5.1 I tried again: most problems solved BUT: sent messages are not saved on the server in mailbox "Sent".
Some background: I deleted the folder "<User>/Library/Mail" and "<User>/Library/Preferences/com.apple.mail.plist" and configured Mail from scratch.
To be sure: I still have Thunderbird installed, and when I send with Thunderbird: a copy is placed in "Sent".
Another thing I noticed: it takes more than a minute to send from Mail 3 and a few seconds when I send from Thunderbird. I have another Macbook Pro with 10.5.0 installed: same problem with sending.
Any help is appreciated.
rene

Well, be stumped I did all that, but to be sure, I did it again:
I have a lot folders with subfolders and they are shown under my account name.
I created a new folder "test" in my IMAP account and designated it to be the new "Sent" folder. It replaces my previous Sent folder in the group Inbox, Drafts, Trash. My previous Sent folder now appears under my account name as a "normal" folder.
I send a message and the Activity monitor says: +"Delivering message: copying message"+. After a minute Mail is done. I check my (new) "Sent" folder and it's empty. I double check in webmail: it's empty.
So I go to the Finder and look in my IMAP folder: <user>/Library/Mail/<IMAP-account>/test.imapmbox and there is no folder "Messages", only Info.plist.
Then I try to move a message to the "Sent' folder: for a minute the Activity moinor says: Copying messages: copying message" and then Mail prompts: +"The message "testing" could not be+
+The connection to the server mail.hicetnunc.nl on port 143 timed out"+.
So it looks like Mail has a problem with the default "Sent" folder: it cannot copy messages to that folder at all! Aha!
But then I try to move a message to a "normal" IMAP folder: same thing! Mail cannot copy to any folder!
In both instances Mail says: +"The message "..." could not be be moved to the mailbox "..."+
+The connection to the server mail.hicetnunc.nl on port 143 timed out"+
Last thing: I try to move a message to a folder in the same account again. But in the process I quit Mail. I open Mail again and Mail is performing pending operations: copying message. After a while Mail prompts: +"Operation could not be completed. (MFMessageErrorDomain error 1028.)"+ and crashes... I open Mail again and it tries to peform pending operations. Again: an error message and Mail crashes. This keeps going on so I delete the whole account and set it up again. Nothing's changed...
I can receive and send, but sent messages are not copied to the "Sent" folder and I cannot move messages around within a IMAP account. But TADA!!!: I can move messages from account to account.

OC4J Report Server is not saving the PDF out put

Hi everybody,
I have a master report running under OC4J.Under this master report 1000's of other reports are runninng by using the srw.run_report.Report name and other required parameters are taking from the database.My aim is to send all generated PDF reports by using the javamail.My problem is report server is not saving any reports until the completion of the master report.Once the master report is completted we can see all the reports under the specified folder, before that we can not see the out put in the folder .So the above reason my mailing part is getting faild because of system cannot find the specified file in that particular path
Hi anybody know how to save each pdf report in a folder insted of waiting the completion of entire report
Is any particular report configuration is required for that?
srw.runreport is running in the batch mode
thanks in advanceee
regards
mathew
Message was edited by:
Mathew Thomas

Please helppp meee

Outlook view settings not saved

I have one user who looses all View settings when restarting Outlook. Occasionally they will save, but it is very rare. Setting the Reading Pane to Off is one good example of a setting that does not save.
The creation of new Views is also not saved. After restarting Outlook, the new View does not appear in Manage All Views.
I have tried creating a new Outlook profile and I'm told that Office 2013 C2R has been re-installed since this problem started.
Outlook 2013 Click-To-Run via an Office 365 E3 subscription. Exchange Online mailbox. Windows 7 Pro 32-bit.
Any help would be appreciated.

Hi,
Basically, Outlook view settings are stored in the default data file. If the data file is corrupt or recreated every time Outlook restarts, the view settings may be not saved.
Does the user use Outlook with Cached Exchange mode enabled? If so, please go to
C:\Users\%username%\Documents\Outlook Files and check if you have multiple .ost files in the folder.
In addition, you may try to switch to turn off Cached Exchange mode and then test this issue again.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

User mapping is not saved

Hi All,
i am doing user mapping in personalization window,
if i am enter my user id and password after that if i am click on save button, the logon data is not saved, so pls solve my problem.
Regards,
Jagadish Babu Kanikanti.

Hi ,
I am configuring a production Server with SP14.
When i am in user mapping section, i find the error msg as below:
<b>There is a configuration issue which leads to problems when accessing user mapping data for the selected backend system 'ESS'. Usually, the reason is user mapping being configured for strong encryption, but the necessary additional files being missing. Check the security log file for further information and hints on how to solve the problem.</b>
I am not able to enter any user id / pwd ; The fields are greyed out.
I did solve the same in the development server using :
<b>Goto System administration-system Configuration-UM Configuration-Direct Editing.
In that make the ume.usermapping.unsecure as TRUE.</b>
But on seeing your reply stating this is not suitable for Production server, i am bit confused.
Can you pls help with me an alternate solution..
Thanks in advance,
venkat.

Ntp drift not saved

Hello everybody!
I'm trying to configure ntp server on ASR1002f (
asr1000rp1-advipservicesk9.03.09.01.S.153-2.S1.bin)
, but i get a lot of annoying log messages like this:
Jul 30 20:14:56.180 MSK: %NTP : Drift Value NTPv4_Drift=0.E68F not saved in persistent data, will be stored before reload
Jul 30 21:14:56.179 MSK: %NTP : Drift Value NTPv4_Drift=0.EB94 not saved in persistent data, will be stored before reload
Jul 30 22:14:56.179 MSK: %NTP : Drift Value NTPv4_Drift=0.EBA9 not saved in persistent data, will be stored before reload
Jul 30 23:14:56.179 MSK: %NTP : Drift Value NTPv4_Drift=0.F3EF not saved in persistent data, will be stored before reload
Jul 31 00:14:56.179 MSK: %NTP : Drift Value NTPv4_Drift=0.F53E not saved in persistent data, will be stored before reload
Jul 31 01:14:56.179 MSK: %NTP : Drift Value NTPv4_Drift=0.F5C4 not saved in persistent data, will be stored before reload
Jul 31 02:14:56.180 MSK: %NTP : Drift Value NTPv4_Drift=0.FAC5 not saved in persistent data, will be stored before reload
Jul 31 03:14:56.180 MSK: %NTP : Drift Value NTPv4_Drift=0.FAD9 not saved in persistent data, will be stored before reload
Jul 31 04:14:56.180 MSK: %NTP : Drift Value NTPv4_Drift=0.FAE5 not saved in persistent data, will be stored before reload
Jul 31 05:14:56.179 MSK: %NTP : Drift Value NTPv4_Drift=0.FAF1 not saved in persistent data, will be stored before reload
Could someone clarify what does this mean and how to stop this?
If I turn on ntp logging I get periodic ntp messages like so:
.Jul 26 15:52:40.790 MSK: NTP Core (INFO): 0.0.0.0 C618 08 no_sys_peer
.Jul 26 15:52:40.790 MSK: NTP Core (INFO): 0.0.0.0 C61C 0C clock_step
.Jul 26 15:52:41.789 MSK: NTP Core (INFO): 192.168.10.225 962A 8A sys_peer
.Jul 26 15:52:41.789 MSK: NTP Core (NOTICE): Clock is synchronized.
Jul 26 15:52:42.201 MSK: NTP Core (INFO): 0.0.0.0 C62C 0C clock_step
Jul 26 15:52:42.201 MSK: NTP Core (NOTICE): Clock synchronization lost.
.Jul 26 15:53:37.792 MSK: NTP Core (INFO): IP1 962A 8A sys_peer
.Jul 26 15:53:37.792 MSK: NTP Core (NOTICE): Clock is synchronized.
Jul 26 16:04:51.791 MSK: NTP Core (NOTICE): Clock synchronization lost.
.Jul 26 16:04:51.791 MSK: NTP Core (INFO): IP2 962A 8A sys_peer
.Jul 26 16:04:51.791 MSK: NTP Core (NOTICE): Clock is synchronized.
Jul 26 16:07:05.791 MSK: NTP Core (NOTICE): Clock synchronization lost.
.Jul 26 16:07:05.791 MSK: NTP Core (INFO): IP3 962A 8A sys_peer
.Jul 26 16:07:05.791 MSK: NTP Core (NOTICE): Clock is synchronized.
Jul 27 12:29:47.789 MSK: NTP Core (NOTICE): Clock synchronization lost.
.Jul 27 12:29:47.789 MSK: NTP Core (INFO): IP2 961A 8A sys_peer
.Jul 27 12:29:47.789 MSK: NTP Core (NOTICE): Clock is synchronized.
Jul 27 14:38:23.792 MSK: NTP Core (NOTICE): Clock synchronization lost.
.Jul 27 14:38:23.792 MSK: NTP Core (INFO): IP1 961A 8A sys_peer
.Jul 27 14:38:23.792 MSK: NTP Core (NOTICE): Clock is synchronized.
Jul 27 15:41:33.790 MSK: NTP Core (NOTICE): Clock synchronization lost.
.Jul 27 15:41:33.790 MSK: NTP Core (INFO): IP3 961A 8A sys_peer
.Jul 27 15:41:33.790 MSK: NTP Core (NOTICE): Clock is synchronized.

Hi,
Have you made sure that the clock on the NTP server is not too far away in time from the client, if this is the case it could take a long time for the client to sync.
Regards
Alain
Don't forget to rate helpful posts.

Volume setting not saved

Hello,
My volume settings are not saved when I power-cycle or reset my iMac. I have tried resetting the PRAM, with no effect. In another thread, someone asked me whether my PRAM battery might be getting old; the answer is, probably not, this computer was new as of this January.
One thing that's a little different from my other/previous Macs is that I have a Solid-State Disk (SSD) as startup disk and a standard Hard Drive (HD) for data storage. As recommended by various threads on the subject, to optimize performance while minimizing wear on the SSD, the /Users/xxx directory is on the SSD, but various sub-directories (Desktop, Documents, Downloads, ...) are on the HD. I've noticed that this leads to various odd perturbations (e.g. icons in the Finder sidebar only update when I click on them, can't launch a Parallels virtual machine by double-clicking its icon, ...), but I really don't see how it would be related to my volume settings.
Here's the machine configuration:
iMac (iMac11,3) 27" / 2.93 GHz Intel Core i7 / 16 GB RAM / 251 GB SSD / 2 TB HD
Mac OS X 10.6.8 (10K540)
Boot ROM version: IM112.0057.B00
Any help would be much appreciated!

Thanks for the suggestion. The Library folder is on the SSD, and I don't think the Public folder really has anything to do with this. But I did try moving the Desktop folder back to the SSD; the only thing that changed is that the Desktop icon in the Finder window sidebar is drawn correctly. The volume setting behavior is not changed.
I noticed something else, though: when I increase the volume and restart, the reboot chime is louder. This implies that my volume setting is correctly saved to PRAM, but then something else - during the start-up - cranks it back down. Does anyone have any suggestions on how to track this sort of thing?

Configuration not saving

Similar Messages

Maybe you are looking for