Configuration notes

hellow every one there,
can any one send me spro configuration notes in production planning
thanks on adv
regards
irfan

Hi Irfan
Configuration settings for one entire PP process:
Important T codes areas,
OPPQ - plant parameters
OPPR - MRP Group parameters
OMDU - To make MRP active for a plant
OMI4 - for Lot-size setting
OPJH for creating order type,
OPL8 Order type dependent parameter
OPKP prodn sched profile
OPU5 Scheduling paramters for planned orders
OPU3 - Scheduling parameter for prodn orders
OPK4 Confirmaton paramter.
OPJJ - Scope of check (Availablity check) OPJK - Checking Control om0e - scope of planning
Please refer these useful links,
http://www.sap-img.com/production/list-of-pp-transport-request-and-their-img-path.htm
http://help.sap.com/bestpractices/BBLibrary/bblibrary_start.htm
PP Configuration Tcodes.

Similar Messages

Dynamic configuration not fil in reused OM in NW BPM

Hi,
I'm having problem in operation mapping that i re-used in nw bpm.
In my scenerio in the operation mapping, a UDF writes on "TServerLocation" and in the next step of BPM, i have receiver determination rule which read from "TServerLocation" variable.
Below step calls OM which in PI.
(UDF writes on TserverLocation)
This next step, reads TserverLocation in receiver tab of Integration Conguration.
Receiver rule
So the problem is dynamic configuration doesn't write on TserverLocation or integration confiuration object removes in soap header somehow.
This was a ccBPM integration and all esr objects, mapping,udfs working fine. No problem with that.
I checked below blog but not get this work.
Dynamic Configuration not working with Integrated Configuration
Has anyone faced similar problem ?
Thank you
-Tahir

HI,
In general Correlation , concept, whatever we configured in Correlation editor , i mean in runtime which xml element should filled with which element of which interface ..as you said you have configured the local correlation to block, in block it is the first receive step, while receiving the first message which is relevent to first recieve step , i mean if it receives the one message which is related to first receive step inteface .. the respective element data will be filled in correlation id and it will assign on giud for processing , so while assign the runtime data to correlation element ( imean filling stage) check you said two elements in correlation does the first message contains these two elements ??
if so ok , no then check , and try to use the IM before calling the IP to fill the payload.
Regards
Chilla
Oh closed!!
Message was edited by:
Chandra Sekhar Chilla
Message was edited by:
Chandra Sekhar Chilla

JDBC Adapter configuration not initialized:null

i
we have a synchronous scenario with the following adapters , RFC <> XI <> JDBC.
1.JDBC Driver installation is done
2.RFC Destination type t is done in sap(sender) system.
3.checking the jdbc in VA is done
while running it is giving the following error.
com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
where we have to initialize JDBC Adapter configuration
Thanks in advance
Prasad Nemalikanti

hi prasad
There are 2 jar files that may be missing from your SQL JDBC driver --> msbase.jar and msutil.jar, I think once you add these to the driver it might work.
also check the driver string for the SQL driver 2 parameters
i.e 'com.microsoft.jdbc.sqlserver.SQLServerDriver' now becomes
'com.microsoft.sqlserver.jdbc.SQLServerDriver'
This will solve your problem
follow this link
Re: MS SQL Server jdbc Driver installation on XI .
XI JDBC Adapter using stored procedures
thanks
sandeep
Reward points if helpful

"Configuration not possible for material PC-2011 : Reason 3"

Hi any MM guys,
Please help me to solve the following thread.
"Configuration not possible for material PC-2011 : Reason 3 --> Help
Message no. V1360"
Thanks and regards
D.Srinivasa rao

I believe you are trying use Sales order for services....and you have created material in services if I am not wrong.
Again sticking to basic rules, you can configure only materials with type KMAT. Further for services, I believe there is a concept called milestone billing...which I am not sure about.
Chk SAP notes, 625092, 26187
BR,
Krishna

JDBC Adapter configuration not initialized Error

Hi,
I am doing a RFC to JDBC scenario in PI 7.1. I am getting the following error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: JDBC Adapter configuration not initialized: null
In communication channel monitoring, it shows the following,
Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL '<URL>': SAPClassNotFoundException: com.ibm.as400.access.AS400JDBCDriver
The JDBC parameters for driver & connection are correct only.
Is the problem related to deployment of JDBC driver or something else? How can i ensure that the JDBC driver deployment is succesful in PI 7.1?
Edited by: senthil nathan on Mar 25, 2009 10:57 AM

Hi Senthil,
Your drivers are not installed properly. Please re-deploy them through SDM.
Regards
joel

JDBC Adapter configuration not initialized

Hi,
I have tested one scenario for WebService to JDBC. Integration engine shows success message.But i got some error in Adapter engine. It shows "JDBC Adapter configuration not initialized".
So, plz anyone give the solution for this problem.
Regards
Vijay

Hi,
1.Check whether the JDBCAdapter is Activated.
2.Check if any firewalls are there frm client side and open
3.Check the password used to connect the Database is correct one.
If all these are fine..do the complete cache refresh once.
Please award marks if found useful.
Thanks
Hamja

Configuration note of SQL SERVER 2005

Hello,
Is there a SAP configuration note for SQL 2005 like note 327494 for SQL 2000 ?
Or does someone know if there should be special configuration for SQL SERVER 2005 ?
Pelase advice,
Dimitry

Hello
Please review 879941 Configuration Parameters for SQL Server 2005
thanks
N.P.C

RFC to JDBC JDBC Adapter configuration not initialized: null

Hi Experts,
My scenario is Proxy to JDBC scenario. I got this problem when executing the interface I got this problem all of a sudden where previously it was working fine.
there is no problem with the User id or password.
com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
let me know how to solve this.
Thanks,
Prem.

I got this problem when executing the interface I got this problem all of a sudden where previously it was working fine.
there is no problem with the User id or password.
com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
Can you ensure that Drivers are properly installed and no problem with them?
Also proper connection parameters are maintained in the JDBC receiver Channel.
Regards,
Abhishek.

Alert configuration Not working in RWB

Hi,
In RWB alertconfiguration is not working, showing the error
<b>404 Not Found</b>". I gone through this thread
Alert configuration or Alert Inbox-----404 Not Found
And my host name is full host name.
In exchange profiles my port is 50100 (J2EE PORT) (Not Changed)
1. In SMICM when I changed to port to 50100 (J2EE) then alert configuration
working, But My scenarios not working throwing error : System Error.
<b>Error Category XI_J2EE_MESSAGING_SYSTEM
Error Code HTTP_TRANSMISSION_ERROR</b>
2. In SMICM when I changed to port to 8001 (ABAP Port) then Alert configuration not working (Error : 404 Not Found), but my scenarios were working fine.
what would be the reason?
thx in advance,
Ansar.

HI,
If Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs.
Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination
Also see the below links
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
Regards
Chilla

QM module configuration notes

Any one please help me to get some QM module configuration notes.
Do help me.if you have some notes "step by step notes of QM configuration"
Also,if you know any sites please advise.
thanks in advance.

Hello Sandip,
due to the fact that the necessities vary for the implementation of QM I would say that it is near to impossible to offer you the desired information. The implementation guide gives you an idea of what you can set up how and what you set up is an individual decision.
If you need assistance in this case I would recommend contacting a correspondent
QM-Consultant who can help you in this process.
Regards,
Isabelle

Tp configuration not completely distributed

Hey guys,
In the post installation part of the solution manager 7.0 EHP 1. i am getting the following message in the TMS configuration...
"tp configuration not completely distributed
Message no. XT452"
OS = windows NT
DB = MSSQL
on running the tp tool check i got the following
RFC DESTINATION -
> RFC PIN ="timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup "
i tried checking RFC for TCP/IP connections CALLTP_WINDOWSNT
following is the log
logon               cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host arjuna.unisoft.com / sapgw09
Error Details     DETAIL: no connect of TP E:\usr\sap\USM\DVEBMGS09\exe\tp.EXE from host arjuna
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 157
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 6282
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Thu Aug 12 18:09:20 2010
Error Details     VERSION: 2
this is the systems gateway trace...
ERROR => GwISearchPartner: timeout, partner LU: >arjuna<, TP: >E:\usr\sap\USM\DVEBMGS09\exe\tp.EXE< [gwr3cpic.c   6239]
ERROR => GwISearchPartner: HOST: arjuna, conv ID: 18550859 [gwr3cpic.c   6252]
so what do i do now ??

Dear All,
we encounter the same error related to an installation of a BusinessObject XI R2. A connection between the BO server and a BI (NW2004s) has been established successfully. The error occurs during the import of a query in Crystal Reports.
Thanks a lot for any helpful comment.
BR
RB

Configuration not dispplayed on the screen

Hi,
I have created two different configurations for a view.
one as default and the other specifying an object type.
have done the following coding in the DO_CONFIG_DETERMINATION method of the view implementation class.
data: lv_object_type    TYPE bsp_dlc_object_type VALUE 'ZFOC_SR',
        lv_subtype        TYPE bsp_dlc_object_sub_type VALUE '<DEFAULT>',
        l_user TYPE uname.
       lv_config_key TYPE .
IF l_user eq 'ZCPSR'.
lv_object_type = 'ZFOC_SR'.
    me->set_config_keys( iv_object_type        = lv_object_type
                       iv_object_sub_type      = lv_subtype
                       iv_propagate_2_children = abap_true ).
    ENDIF.
    CALL METHOD SUPER->DO_CONFIG_DETERMINATION
EXPORTING
    iv_first_time = ABAP_true
but still the default configuration is being loaded.
pls correct me, if i have missed some specification in the above code.

Thanks Sumit but, still the same result.
if anything more to be done, pls specify.
Have specified the object type and config key in spro.
Have tried deleting the default configuration and retaining only the one i have created.
on debugging, i got to know that the system is searching for standard config after the method
DO_CONFIG_DETERMINATION.
since i have deleted the default config. i got the following error:
CX_BSP_DLC_CONFIG_NOT_FOUND - Configuration not found
CL_BSP_DLC_XML_STORAGE2=>GET_CONFIG_DATA
Q1. why the system is checking for standard config, after getting the confing details from
DO_CONFIG_DETERMINATION
method.
Do we need to specify any other parameter, to restrict this.

Host Configuration not found error in database control

I have freshly installed Oracle DB 11g and a starter database.
Then i went to emctl (database control), at the home tab, I noticed the status is up (Green up arrow icon) but the "Instance Name", "Version", "Up Until" entries have the value "unknown"
And then when i Click on the "view all properties link", I noticed that the ORACLE_HOME entry has a warning icon after the entry. Then when you click on the ORACLE_HOME entry link, I get a page saying
Host Configuration not found. Check to see if the target exists.Whats happening? Did I miss something in my installation?
regards,
Anton

What is the OS?. Have you seen the Metalink note: 353681.1
Subject: Problem: Click on ORACLE_HOME gets "Host Configuration not found. Check to see if the target exists"
Doc ID: 353681.1 Type: PROBLEM
Modified Date : 30-JUL-2007 Status: PUBLISHED

Navinokr: Mail configuration not found

navinokr: Mail configuration not found

Check with your e-mail provider about the settings you need to setup e-mail on iPhone.
Set up an account. Go to Settings > Mail, Contacts, Calendars > Add Account. If you’re setting up an iCloud account, you can also do that in Settings > iCloud.

FICO Configuration notes

I have just completed FICO course. Can anyone please give me some FICO Configuration notes, books and other documents for reference.
Please send it to - [email protected]

Link: http://help.sap.com/bp_blv1500/BL_India/index.htm
Path: Technical Info --> Building Block --> Country: India
Here you will find Implementation Guides for baseline configuration & scenario's.
Other Link:
www.sap-img.com
www.sapgenie.com
Regards,
Rajesh Banka
Edited by: Rajesh Banka on Jan 8, 2008 10:57 AM

Configuration notes

Similar Messages

Maybe you are looking for