Configuration of 11.1.2.2 on linux

HI,
I am trying to configure 11.1.2.2 Essbase on linux (standalone Essbase).
When I run configurator (in console mode) I have following problem.
I complete all things I need to complete and on the last screen I press next and the configurator hangs (just as on screen).
It hangs like that for over an hour.
No directories are being created (for example user_projects) and I do not know how to check if this is working.
Can anone help me?
I am not experienced with linux so every little help will be cool.
Best regards,
Greg

Hi,
It's a cluster install and took sometime to do the full install so it will be a pain to re-install everything over. Currently have tested the processes and seems to be working fine.
Also I don't find
/var/tmp/wlstTemp
I do see wlstTemp appended with linux users who did Oracle SOA install.
Also in-future when creating a new environment besides the above chmod 777 on /var/tmp/wlstTemp is there any parameter we can supply when running config.sh. I read some where that in-order to get by these errors at the time of domain creation we can also pass some parameter.
Thanks

Similar Messages

Vhost configuration for Adobe Media Server running under linux.

Please help me with Vhost configuration for Adobe Media Server running under linux.
I was running a media sharing website for which I wanted to use Adobe Media Server.
To use, AMS, I disabled the already installed Apache server and installed AMS along with the built in Apache server. I could successfully install AMS and could login to AMS Admin Console through my IP number.
My existing website, www.mydomain.com is having its contents located at:
/home/mydomain/public_html
(Directory created under the old version of Apache not bundled with AMS)
Users will be uploading their videos, which will get transcoded and will be delivered to the website visitors in the existing scenario.
To use this website with AMS, this is what I did:
I created a folder for my domain, www.mydomain.com as below
/opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
Copied Application.xml and Vhost.xml from /opt/adobe/ams/conf/_defaultRoot_/ and pasted them in /opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
In the Application.xml file there are 2 entries:
<Alias name="mydomain.com"></Alias>
<AppsDir>${/home/mydomain/public_html}</AppsDir>
Please help me with further steps to be completed:
Do I need to create a separate VirtualHost entry in the Apache installed with AMS?
If yes, can I specify already existing document root for my website (/home/mydomain/public_html) or do I need to create a separate folder under webroot/Apache ?
If yes to point 2 above, then do I need to copy all the existing contents from /home/mydomain/public_html to the newly created folder ?
I hope, I can serve all my static contents like html pages and php and media like video/audio. In that case do I need create alias to my Media/Alias folder or AMS will automatically start streaming when a video/audio is requested ?
What other steps do i need to complete?
Any help in this regard would be highly appreciated.
Thanks and Regards

Dear sir or madam,
Here is Letswin Technology, which specializes in global servers, web hosting, VPS, VPNj. If anything I can do for you, pls contact us!
Have a nice day!

Configure dial-up connection in Oracle Enterprise Linux Release 4-3.7.11

Hallo!I have just finished installing Oracle Enterprise Linux Release 4-3.7.11 so that I can set up Oracle 10g on this Linux platform.
But first I need to set up a few configurations e.g enable my OEL connect to the internet via a dial-up modem.
I have used my modem successfully on openSUSE 11.2 and Ubuntu 9.04 but I am unable to use it on OEL.
My ubuntu configurations are as follows
Connection Name:ZAIN
Number:*99#
APN:ke.celtel.com
How do I set up dial-up in OEL using the settings above?
Also,simple commands to restart the OEL such as shutdown -r now are not being found when I type them in the terminal.How can this be so?
Thanks.

user11114098 wrote:
But first I need to set up a few configurations e.g enable my OEL connect to the internet via a dial-up modem.Use wvdialconf to configure access.
Use wvdial to dial out using the modem, authenticate, and have it launch the pppd daemon for creating an IP connection via the modem.
If you want to configure manually, you will need to edit the files pap-secrets and chap-sercrets in +/etc/ppp+. Then you also need a unique config file for your connection defined in the +/etc/ppp/peers+ directory.
These files are fairly simple to edit. The secret files contains your ISP authentication details. The peers file the phone number and account name (from the secret files) to use. wvdialconf should configure this accordingly though.
There's lot of details available on the web - suggest you google.

Configure BPMJ2EE 10.3.1 for Redhat Linux

install BPM J2EE 10.3.1 for Redhat Linux and weblogic server 10.3 for linux in Redhat Enterprise Linux 5.
The oracle DB is installed in Windows 2003 server sp1 of another machine.
When I configure the BPM, it is failed at about 70%.
Mush I install weblogic server and BPM and config the BPM as root?

Hi YE,
If you are deploying BPM on a Weblogic Server you'll find your workspace on the following url
http://localhost:7001/workspace
This is because the all the jar services are deployed to the WLS. You can monitor if it is installed by going into the Process administrator -> Engines -> J2EE jar deployment (or something)
There you'll find all the jars that are/can be deployed. If you make any changes using the BPM admin center configuration don't forget to recreate and redeploy the jar file.
Hope this helps.
Kind regards
Nils

Help Configuring Grub for Windows 7 + Arch + Another Linux Distro

I have been running Arch on my computer for a few months now and love it and use it as my main OS. However, I do like to try other linux distributions from time to time, just to see what they're about.
My PC has one hard drive and is partitioned like this:
sda1 = NTFS Windows 7 Loader
sda2 = NTFS Windows 7
sda3 = ext4 Slackware
sda4 = ext4 Arch
Note the entry for Slackware. So this morning I decided I wanted to try Slackware. sda3 originally had Ubuntu on it. So I used gParted to format sda3 and I labeled it Slackware. I then went through the Slackware installer and installed Slackware successfully except for one issue - it reported that it could not modify the boot loader. It otherwise reported that the install was successful.
So I rebooted and got the same Grub menu options as I had before the Slackware install attempt, meaning that Ubuntu was still listed as sda3. I tried selecting that and Slack would not load (sorry - I forget the exact error).
I'm pretty sure that Slackware is installed in sda3 and it is just a matter of configuring Grub to recognize it, though I could be wrong. Can anyone provide guidance as to how to solve this problem?

If you want Grub to recognize your Slackware install
-install os-prober
-use grub-mkconfig to generate a new grub.cfg

How Configure Kiosk Mode to join an other linux server (by Xnest)

Hello,
I have a sun-ray server (srss 5.2 on Centos 5.6). I want my sun-ray clients to join a linux server by my sun-ray server. I think I can do that by using 'Kiosk Mode' with Xnest.
Can you explain me how I can configure Kiosk Mode with a Xnest Session ?
Are there some sites which deals about Kiosk mode configuration with examples ?
Thans in advance,
Alex

Hi Leo Laohoo
I think it is getting IP address
Not in Bound state.
*Mar 1 00:04:08.123: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar 1 00:04:18.127: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Mar 1 00:04:18.235: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.0.0.13, mask 255.255.255.0, hostname AP6c41.6a29.7d2b
it saids it is getting the 10.0.0.13, but can not discover the WLC.... why it is not discovering it???
that's my problem.
The AP is directly connected into the switch. there is no more connections beside this one. the WLC (Catalyst 3850) hasta the DHCP configuration, so, I don´t need an external DHCP server.
How do I know that the WLC module is enable on the Catalyst??? I activate the 90 ap evaluation license.
Best Regards

Configure dbstart script Oracle 10g Oracle Enterprise Linux

Hallo!I am a newbie in Oracle 10g having installed Oracle 10g in Oracle Enterprise Linux version 4 update 7.
Please give me a step-by step guide of how to configure dbstart script such that I can start the listener,the database ,Enterprise Manager and isqlplus automatically at boot time.
Thanks.

dbstart does not work correctly in 10.2.0.4 and 10.2.0.5 (solaris 64bit) I did not try it in 10.2.0.1.
If you look at this thread you will see some discussion of the problem: "dbstart" command error in Oracle10g_Linux
I tried the fix from that thread and dbstart still does not work.
Both dbstart and dbshut are required to have the oracle_home path passed to them as the first argument per the 10gR2 Administrators reference for Unix systems.
http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#CFAHAHGA
See metalink bug: 386650.1 for a potential resolution to dbstart
Edited by: user925295 on Sep 10, 2010 5:45 PM
Edited by: user925295 on Sep 10, 2010 5:47 PM

Configuring oracle data source in a jboss/linux environment

Hello
I am facing problems to establish connection type 4 with a JBoss 5.1.0
my Data Source is the following :
<datasources>
<local-tx-datasource>
<jndi-name>jdbc/ilogDataSource</jndi-name>
<connection-url>jdbc:oracle:thin:@127.0.0.1:1521:XE</connection-url>
<driver-class>oracle.jdbc.driver.OracleDriver</driver-class>
<user-name>SYSTEM</user-name>
<password>senha</password>
<exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.OracleExceptionSorter</exception-sorter-class-name>
</local-tx-datasource>
</datasources>
I do have a ORacle XE (10.2.0) local and it is working fine (I can access its APEX in port 6060 and I am also able to access it throught eclipse)
running the command : bash-3.2# lsnrctl status XE
I get :
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-AUG-2011 15:55:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ericomtx)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-AUG-2011 15:10:37
Uptime 0 days 0 hr. 44 min. 53 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ericomtx)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ericomtx)(PORT=6060))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
The command completed successfully
bash-3.2#
my problem is the following : my applicaiton is not establishing the connection ... when it is the time to do so it gets stuck
my OS is a red hat and my computer name is ericomtx as follows :
bash-3.2# hostname
ericomtx
I have changed my computer name in the following files :
/etc/hosts
/etc/sysconfig/network
I also have oracle environment variables in /etc/profile:
bash-3.2# echo $ORACLE_HOME
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
my linux user is added in DA group created by oracle install
please can some one help me out ?
Thks&Regards
Érico

please can some one help me out ? No, you need your local friendly system administrator or DBA.

Problem configuring DNS, DHCP and GNS in Oracle Linux 6.2 OS for 11gR2 RAC

As you have succeeded you may know the steps perfectly so could you please help me to get through this my good buddy?
ERROR___________________________________________________________________
*[grid@macrac1 ~]$ srvctl config scan*
SCAN name: cluster1-scan.grid1.amil.com, Network: 1/192.168.2.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /cluster1-scan.grid1.amil.com/192.168.2.215
SCAN VIP name: scan2, IP: /cluster1-scan.grid1.amil.com/192.168.2.216
SCAN VIP name: scan3, IP: /cluster1-scan.grid1.amil.com/192.168.2.217
[grid@macrac1 ~]$
[grid@macrac1 ~]$
[grid@macrac1 ~]$
*[grid@macrac1 ~]$ dig cluster1-scan.grid1.amil.com*
; <<>> DiG 9.7.3-P3-RedHat-9.7.3-8.P3.el6 <<>> cluster1-scan.grid1.amil.com
;; global options: +cmd
;; connection timed out; no servers could be reached
[grid@macrac1 ~]$ nslookup cluster1-scan.grid1.amil.com
;; connection timed out; no servers could be reached
DNS server configuration_
*[root@macnam named]# vim /etc/hosts*
127.0.0.1 localhost.localdomain localhost
192.168.2.111 macmac.amil.com macnam
*[root@macnam named]# vim /etc/resolv.conf*
# Generated by NetworkManager
search amil.com grid1.amil.com
nameserver 192.168.2.111
Forward zone file__________________________________________________________
Located in /var/named/chroot/var/named
*[root@macnam named]# vim master.amil.com*
$TTL 1H ; Time to live
@ IN SOA macnam.amil.com root.localhost (
0 ; serial
1D ; refresh
2H ; retry
4W ; expire
1H
) ; minimum
@ IN NS macnam.amil.com.
localhost IN A 127.0.0.1
macnam IN A 192.168.2.111
macrac1.amil.com. IN A 192.168.2.112
macrac2.amil.com. IN A 192.168.2.113
macrac1-priv1.amil.com. IN A 192.168.3.112
macrac1-priv2.amil.com. IN A 192.168.4.112
macrac1-priv3.amil.com. IN A 192.168.5.112
macrac2-priv1.amil.com. IN A 192.168.3.113
macrac2-priv2.amil.com. IN A 192.168.4.113
macrac2-priv3.amil.com. IN A 192.168.5.113
$ORIGIN grid1.amil.com.
@ IN NS cluster1-gns.grid1.amil.com.
IN NS macnam.amil.com.
cluster1-gns IN A 192.168.2.200; glue record
Reverse zone file__________________________________________________________
*[root@macnam named]# vim 192.168.2.rev*
$TTL 1H
@ IN SOA macnam.amil.com. root.localhost (
0 ; serial
1D ; refresh
2H ; retry
4W ; expire
1H
) ; minimum
@ IN NS macnam.amil.com.
111 IN PTR macnam.amil.com.
112 IN PTR macrac1.amil.com.
113 IN PTR macrac2.amil.com.
RAC node configuration_
*[root@macrac2 ~]# cat /etc/hosts*
127.0.0.1 localhost.localdomain localhost
# Public
192.168.2.113 macrac2.amil.com macrac2
192.168.2.112 macrac1.amil.com macrac1
# Private
192.168.3.113 macrac2-priv1.amil.com macrac2-priv1
192.168.4.113 macrac2-priv2.amil.com macrac2-priv2
192.168.5.113 macrac2-priv3.amil.com macrac2-priv3
*[root@macrac2 ~]# cat /etc/resolv.conf*
# Generated by NetworkManager
search amil.com grid1.amil.com
nameserver 192.168.2.111
*[root@macrac2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0*
DEVICE="eth0"
NM_CONTROLLED="yes"
ONBOOT=yes
HWADDR=08:00:27:42:64:34
MTU=1500
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.2.113
PREFIX=24
GATEWAY=192.168.2.1
DNS1=192.168.2.111
DOMAIN="amil.com grid1.amil.com"
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
Edited by: Ora_Bunny on Aug 27, 2012 10:14 PM

hi
IMO, your /etc/hosts should contain scan entry because it cannot be resolved here.
BTW, /etc/hosts should be identical on all nodes.
See my production settings (my PLWRS-GS-SCAN is registeres in RR way in corporation DNS and resolves to 3 IP's):
# Public
10.154.18.123 plwrs-db1.emea.nsn-net.net     plwrs-db1 db1
10.154.18.125 plwrs-db2.emea.nsn-net.net     plwrs-db2 db2
# Private
192.168.2.101 plwrs-db1-priv.emea.nsn-net.net     plwrs-db1-priv
192.168.2.102 plwrs-db2-priv.emea.nsn-net.net     plwrs-db2-priv
# Virtual
10.154.18.121     plwrs-db1-vip.emea.nsn-net.net     plwrs-db1-vip
10.154.18.122     plwrs-db2-vip.emea.nsn-net.net     plwrs-db2-vip
# SCAN
#10.154.18.118 PLWRS-GS-SCAN.emea.nsn-net.net     PLWRS-GS-SCAN
#10.154.18.119 PLWRS-GS-SCAN.emea.nsn-net.net     PLWRS-GS-SCAN
#10.154.18.120 PLWRS-GS-SCAN.emea.nsn-net.net     PLWRS-GS-SCAN
If you don't use DNS server, or for testing purposes, set one SCAN entry only in hosts file , e.g.:
10.154.18.118 PLWRS-GS-SCAN.emea.nsn-net.net     PLWRS-GS-SCAN
Edited by: g777 on 2012-08-28 08:55

Stuck at Configuration Details when installing Enterprise Manager 12c linux

Hi all
I need a help with installations of Enterprise manager 12c. Usually it is a straight forward installtion. But this time, i encounter this error :
ERROR:SQLException null Resultset
Unable to connect to the database and validate whether it is a supported database due to one of the following reasons:
(1) Incorrect credentials
(2) Listener may be down
(3) Database may be down
Check the credentials ,the status of the listener and the database and retry.
I am sure I put in the correct username/password, port number and host name, I could connect by TOAD and sqlplus from my desktop with no problem. but the installer tells me that incorrect credentials were given. I really could not understand where the problem could be.
Any help or directions are greatly appreciated.
Yong

No. Do I have to? I just thought this is not that severe to bother oracle support. I thought some dbas on this forum could help. I even downloaded another copy from website and reinstall it and it returned the same error. Looks like the software can not parse the password correctly. Don't if any other dbas encounter such weired behavior.
Thanks.

Using plink when configuring server stats to connect to Unix/Linux enviro's

Hi,
There is a bug in the supplied plink.exe located in OATSInstalldir\datacollector\bin. Please download the latest version (available via many sites...just google it). The usual error is "Did not find correct command prompt".Just replace the old version executable with the newly downloaded one.
Regards
Wayne.

Thanks for the update Wayne!
This is really useful information, I have been having a problem with that for a wile.
Alex

Issue in 11.1.2 Essbase configuration on Linux 5.5 64Bit - Config hangs

Hi Experts,
I am trying to do a fresh install and configure of EPM 11.1.2 in a distributed environment:
1. Oracle database version 11.20as repository on Linux server 1(linux 5.5, 64 bit) installed and working fine.
2. I installed and configured HSS on a Windows 2008 server SP1 64 bit - configured following: common settings, database,OCM,deploy to Application Server - Success. and I am able to open the HSS front end and check users,groups etc.
Now, I installed Essbase server,EAS server,ES server,EIS server on Linux server 2(5.5,64 bit).
The Problem is: When I am configuring Linux server 2(All the above mentioned Essbase components) -
Configurator asks for "Previously configured SS database"- I provide the details
next -> it asks for ES,EAS database schema -> I provide the details
next -> asks for weblogic domain information -> 2 options there -> I choose- > Deploy to an existing domain -> All the required info was already there(Windows server above)
BUT, when I click "next" -> the screen just Hangs and does not go anywhere. I waited for 1 hr and nothing happened.
So, I cancelled it and started the config again, but again the same issue.
the message on the linux server console are:
"HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
ConfigurationManager not available"
and No logs are generated under /oracle/Middleware/user_projects/epmsystem1/diagnostics/logs/config
any help on this will be greatly appreciated!!
this is a bit urgent ..please reply.
thanks,
Ankit

Can we even have the following landscape?
1. HSS,OHS,Weblogic server,workspace - On a Windows 2008 server
2. Essbase server,EIS server,EAS server,EIS server - on a Linux server
3. Oracle database on another linux server.
my questions is, can we have the installation and configuration done considering the OS (wid and Linux), as described in points 1&2 above.
I guess I read somewhere, that all the web applications can be deployed to either all windows or to all Linux OS servers? - Is it correct?

DAC and Informatica 8.6.1 installation and configuration on Linux (64 bit)

Hi Hussien,
I saw some very good post by you regarding installing, setting up and configuration R12 , OBIEE, DAC 10.13.4 , Informatica 8.6.1 on Windows. I am looking installation and configuration of Informatica and DAC installation on Linux 64 bit platfrom. I have already running R12 and OBIEE instances on Linux 64 but now need to configure the Informatica and DAC.
I find some starting steps and documentation from the web but your expert advises and reference Notes are awesome so looking for that.
Regards
-Samar-

Samar,
I do not have specific document for DAC installation, but I would suggest the following links/docs:
Oracle Business Intelligence Data Warehouse Administration Console Introduction
http://download.oracle.com/docs/cd/E12513_01/doc/index.htm
System Requirements and Supported Platforms Guide for Oracle Business Intelligence Applications 7.9.6.1
http://download.oracle.com/docs/cd/E14847_01/bia.796/e14221.pdf
Note: 1082987.1 - ALERT: Required and Recommended Patch Levels For OBIEE 10.1.3.x Versions
Note: 981452.1 - INFORMATICA 8.6.1 CONFIGURATION ISSUE FOR ORACLE BI APPLICATION 7.9.6.1
Thanks,
Hussein

Essbase Configuration (Linux)

Hi All,
I have a bunch of questions that I have put together which does not allow me to move forward. Please take some time and respond with available knowledge.
Environment:
Essbase on Linux
Foundation services on Windows
Version 11.1.1.3
Questions:
1. Having installed foundation services on windows, when we run the config utiliy everything passes except the "Registering with Shared servies part". The error says "Unable to connect to Shared services: Start Shared services". We do not see any services running specific for shared services.
2. On the Essbase server, we run the config utility and face the following issues.
a. Unable to connect to shared services. Do we have to mention the host name where shared services are installed or just the DB info is good.
b. Should we mention the same port that shared services is configured on while configuring essbase or can we specify a different port in here. This is cos we have 4 instances of essbase installed.
Please try to help me out of this situation.
Thanks.

Can we even have the following landscape?
1. HSS,OHS,Weblogic server,workspace - On a Windows 2008 server
2. Essbase server,EIS server,EAS server,EIS server - on a Linux server
3. Oracle database on another linux server.
my questions is, can we have the installation and configuration done considering the OS (wid and Linux), as described in points 1&2 above.
I guess I read somewhere, that all the web applications can be deployed to either all windows or to all Linux OS servers? - Is it correct?

Configure Job Server    [NOT INSTALLED] in Linux

Hello All,
I installed IPS and DS 4.3 SP3 on it in Tomcat in linux environment .
In server manager i found "Configure Job Server    [NOT INSTALLED]"
So how do i install this component.
Regards,
Aisurya

Hi Puhan,
Please refer the below steps for configuration of Job Server:
(a) Log in Linux
(b) Go to BODS Directory
(c) Run below command
$ . ./al_env.sh
$ ./svrcfg
(d) Below details will appear
** Data Services Server Manager Utility **
       1 : Control Job Service
       2 : Configure Job Server
       3 : Configure Runtime Resources
       4 : Configure Access Server
       5 : Configure SNMP Agent
       6 : Configure SMTP
       7 : Configure SSL
       8 : Configure Native Component Supportability
       x : Exit
(e) Enter 2
(f) Then Enter the New Job Server name: JOb_Server
(g) Then Enter Port Number:3500 (Enter Port Number as per your environment)
(h) Then SNMP Enable: Y
(i ) Then Adapter management
Port Number: 4001 (Enter Port Number as per your environment)
(j) SSL Protocol: Y
(k) Enable SNMP: N
(l) Now Enter Database details
After that below page will update with JOb Server Information associated with Local repository
Hope this will help!!!!
Thanks,
Daya

Configuration of 11.1.2.2 on linux

Similar Messages

Maybe you are looking for