Configuration of Batch classification in MIGO Tcode

Hello all,
In Migo TCode how can we Enable or Configure the batch Classification. Can you please let me know?
Moderator message: not directly related to ABAP development, please search for information.
Edited by: Thomas Zloch on Mar 18, 2011 3:29 PM

Hi Hagit!
BADIs are defined (and can be searched with) in transaction SE18.
Own extensions can be implemented with transaction SE19.
Both transactions have little blue 'i'-buttons: press them and you get pretty good help.
Otherwise look at help.sap.com
Regards,
Christian

Similar Messages

Batch Classification in MIGO

Hello,
I'm using enhancement MBCFC004 (user exit EXIT_SAPMM07M_004) in order to fill batch classification in MIGO transaction, when pressing 'Classifications' button in 'Batch' tab.
I've put a break point in the code I've created, but when pressing the classification button nothing happens.
The project and the user-exit are activated.
What can be the problem.
Thanks,
Hagit.

Hi Hagit!
BADIs are defined (and can be searched with) in transaction SE18.
Own extensions can be implemented with transaction SE19.
Both transactions have little blue 'i'-buttons: press them and you get pretty good help.
Otherwise look at help.sap.com
Regards,
Christian

Batch Classification im MIGO

Dear All,
I'm trying to do the customising for MIGO where i have to maintain the batch characteristics. I've created a class with characteristics and assigned it to material. Then in OMJJ, in the detail of 101, I've marked the batch classification as '3'.
Then i did GR but no batch classification showed up as mandatory. Is this normal or is there any remaining customising ?
Best regards,

Hi,
Make sure that you check the checkbox batch management in purchasing viw of material
Also assign the class you have created with asignment of characteriscs in classification view of the material and the do with PO and GR then you can see the tab batches.
Thanks.

BADi/UserExit for MIGO : To popup batch classification screen auto

Hi all,
I want to pop up batch classification screen automatically in MIGO when performing a goods movement . In MIGO there is a command button for that to open up the batch classification screen, but my requirement is when click CHECK or SAVE button, branch it to batch classification screen if those characteristics are not maintained.
Please reply .
Thanks and Best regards,
Sandun

HI ,
Chk BADI using these steps..
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler => get_class_name_by_interface'.
5. Then run your transaction.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.

Updating Batch classification data from MIGO for Purchase order

Hi,
I need to update batch classification data (in MSC3n) from MIGO for purchase order. The logic needed for this is as below,
1) Pass material and batch to MCH1 table to get CUOBJ_BM.
2) Pass CUOBJ_BM to INOB table to get INOB-OBJEK.
3) Pass INOB-OBJEK to CLAF_CLASSIFICATION_OF_OBJECTS to get class name & characteristic name.
4) Pass INOB-OBJEK, CLASS name and characteristic name to BAPI_OBJCL_CHANGE to update batch classification data.
I created implicit enhancement at the bottom of FM "CLVF_VB_INSERT_CLASSIFICATION". But the problem is, the return parameter of BAPI_OBJCL_CHANGE is giving the following error.
Class type 023, object type MCH1, object RAW-6 0000001151
Object is currently locked by user
The assignment was not changed
Please let me know how to do it. Is there any BADI or User Exit?

Hi,
As you said the break point is not triggering did you activate your exit and activated even the project to which your exit is assigned.
I hope you missed activating your project in CMOD transaction. Please verify it once and if it is not activated then immediately activate it and try debugging again.
Regards,
Rafi

Batch classification during GR against production order using txn MIGO

Hello All
       I am usng batch classification during for movement type 101, when am doing the GR against production order using txn MB31 the system automatically navigates to classification screen wherein i need to enter the characterstic value & it all goes well, I can also view the stock with batch no and the classifcation value when the GR is being done with txn MB1.
      But when am dong the same thing i.e. GR against production order using txn MIGO system doesnt navigates to classification screen for characterstic value entry and am able to do the posting. I want that system must navigate to classification screen automatically if i do the GR using MIGO also as it doen in the case of txn MB31.
       Please suggest what settings are to be done for the same, I am unable to figure out why the system is behaving in this manner. Kindly provide your inputs to sort out this issue. Waiting for your valuable inputs.
Regards,
J K Tharwani

Dear,
did u refer SAP Note 519303 ?
After keeping Batch Classification as 4 in OMCV, in MIGO, it will start showing the Batch Classification button under "Batch" Tab, it will not show the Batch Classification Pop-up automatically as it shows in case of MB31.
If you wan users to enter the characteristics values mandatorily in the Batch Classification then in CT04 for these characteristics activate Entry required indicator in "Basic Data" Tab
SAP Note 519303
Please refer this also,
[MIGO|Re: How can I get the MRP history?]
Regards,
R.Brahmankar

User Exit for batch classification for tcode mb1c

HI experts,
I have implement customer exit MBCFC004 EXIT_SAPMM07M_004 and CLFM0002 EXIT_SAPLCLFM_002 to set a value for
a customize characteristics.
Now I have a issue.
MBCFC004 EXIT_SAPMM07M_004 can work with migo but when I with mb1c to do same transaction it didn't
work.
CLFM0002 EXIT_SAPLCLFM_002 only work when I input a value in the customize characteristics it can change the input value.
I have set extension in OMCV for my move type. and assigned the bath to material.
I have reference
Re: User Exit for batch classification
but I haven't found any question for my solution.
please help me.
thanks a lot.

Class ZBATCH has status 1 (= 'Released') but the customizing of classtype 023 doesn't allow to classify with classes of this status. Settingsfor class status in class type 023 are different from what SAP delivers.Correct please these settings. You may lookup the correct definition of
the class status in class type 022.

Batch Classification Characteristic Values in MIGO...

Hi,
Can we update Batch Classification Characteristic Values in MIGO...
Batch is also created while doing MIGO. I have no issues in creating Batch.
Thanks in advance...

Hi.
You can use the CACL_VALUE_CHANGE badi.
Regards.

MIGO - how check batch classification.

Hi all,
When using the transaction Migo (create), the user can enter a certain characteristic through -> batch -> classification for each position. I have to check that the input code is not already used in another posizion.
I found the Badi CACL_VALUE_CHANGE, but at this point I have only the characteristic of a single position.
Does anybody know the internal table which stores the characteristics and at what point can I go to check them?
I also found these internal tables IZH, AMM and ZM, but at the time of final check, they are not available.
I thank you in advance

Hi,
You can get the characteristic values from the standad table AUSP , and table CHVW.
Thanks and Regards,
Narayani

Need Badi/user exit-migo-update batch classification

Hello all,
I need to update revision level and country of origin in batch classification tab in migo while posting GR.
I've already done using exit "EXIT_SAPLV01Z_014".
But this exit triggers only when classification tab is clicked in migo.
But i need to also update rev level and country of origin when GR is posted(Save button is pressed).
I tried MB_CF001,MB_CF001,MBCF0002,MBCF0005,MBCF0006,MBCF0007,MBCF0009,MBCF0010,MBCF0011
and badis
MB_DOCUMENT_BADI,CACL_VALUE_CHANGE.
Please someone help me
Thanks in advance

Hi Sriram,
If you want to add logic on particular action you need to search for exact BADI.
e.g.
As you are expecting that your code need to be trigger when user press SAVE button (Time of Posting) so at that time you need to check which BADI get trigger ( I am assuming that you have knowledge on how to search BADI)
List down the BADI name and check the methods. You will get exact method name in listed BADI's.
I am hoping that while checking badi you will find MB_MIGO_BADI just check and use method [POST_DOCUMENT] for your logic.
Also in User Exit you will see multiple function modules in component those function modules are behaving like PAI and PBO. so you need to find out whcih function module will trigger as per your requirement.
please find below link which will help you to understand how to search User Exit.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0041d4e6-1e43-2e10-0db4-9386abe98fe6?overridelayout=t…
Please let me know if its work for you.
Regards,
Nikhil

Batch Classification Prob

Hi Gurus,
Need a urgent help from u guys. While doing Finished Goods Posting (MIGO),I want to automatically pick up the Batch Number from the Mother Coil Number. The batch number should be the same as the one as entered (Batch Classification) during RM Posting.
Could u please help me on the configuring the same.
Regrds,
Binayak

Hi,
I have a problem,
Say there is a Mother Coil (RM Coil)
Coil No. Batch Number
XYZ (Entered During Batch Classification) 123
From this mother coil I want to create Finished Goods.
While doing the FG posting I want the system to automatically pickup
the RM Coil No. XYZ and put in the FG batch number say 456.
That means the FG batch classification should have the same coil number
as that of RM.
Could u please tell me how to configure the same.
Regrds,
Binayak

Copy batch classification in GR (101)

Dear gurus,
Could you please help me with the following issue.
I have a material managed in batches, and it has a classification type 023 in material master.
Now I want the class (with all characteristics) to be copied to the batch classification during the good reciept (MIGO / 101).
How it's possible?
When i go to the batch generated in migo (101) using T-code MSC2N, there is one icone in Classification-tab "Create classification". and i can do it manually. how can we do this automatically in GR (101).
Thanks in advance.

Hi,
Check for that movement type in OMJJ in Entry control tab where there is field called classification batch, check what is defined for that movement type.
Regards
Ravi Shankar.

Batch classification "Date of last goods receipt" is "00.00.0000"

Dear all,
I have configured all steps for batch determination for FIFO.
It worked fine for IM (stock transfer - mov.type 301) on last friday, however, get the issue today:
- After I do GR (mov.type 101), the batch is auto created, batch classification is created,
I use MSC2N to view batch classification:
the value of "Date of last goods receipt" is "00.00.0000"
What is wrong with my configuration?
Could you pls help me to fix this?
Thanl you very much for you help!
Edited by: Ngo Quoc Hung on Dec 13, 2010 10:59 AM

System Updates Batch Data in the Batch Master Record in the Following ways :
1) If the batch does not yet exist for the plant, it is automatically created.
2) If the batch already exists for the plant, the new quantity is simply posted as a receipt in the specified storage location.
When posting a goods receipt with reference to Purchase order, the system updates Posting date as the goods receipt date in general data of the batch.

DMS object link to MIGO tcode - attach to GRN

Hi,
Our scenario requires us to link documents with specific GRN number via MIGO tcode. This is a non-std object and the logic
1.Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN.......
is not helpful at all and incomplete.
Could anyone please let know what needs to be done from GRN object side to enable documents to be attacvhed.
Archivelink is not an option because several documents need to follow life ctycle and versioninG.

Hello,
It is a two step process:
1. Screen activation in SAP DMS
2. Screen activation in SAP Object
Please follow below steps:
1. Configuration of screens as per SAP suggestion & Maintenance of Standard Structure MCDOKOB
Material document number filed MBLNR need to be included in the standard structure.
2. For t code MIGO, following function module needs to be maintained - OBJECT_CHECK_MSEG
3. Maintenance Key Fields
MSEG MIGO MBLNR MBN
4. Maintain Object link
MSEG Material Document Screen Number (enter the screen number which you have configured)
Use the above created object link in your document type.
5. Implementation of BADI - MB_MIGO_BADI, this is to activate the sceen of documents in MIGO
I have not done this. So it is possible that i would have missed some step.
But I am sure, it will help you a lot.
Thanks & Regards,
Mihir Popat

Batch Classification Screen for Goods Movements

SAP Gurus,
Very recently (24. April), we experience the following issue: (PP-PI Process Order)
At the moment of process order confirmation, for any new batch assigned in the good movement overview, there's no pop-up of batch classification screen which allow our user to entry the classification data. And this functionality works fine in the past.
Do you have an idea that how it happens? We checked the configuration OMCV and master data as well, the settings are all fine to me.
Best regards,
Vincent

Dear Vincent,
I think you talk about the 101 movement, don't you? In this case this is not possible at all, check SAP note 85310
Because goods movements can be decoupled from confirmations and
processed in background, it was decided that this functionality would
not be implemented; therefore this is Standard R/3.
Solution
As a work around for this you have the following options:
1. Classify your batch manually through Batch Master Maintenance.
2. Turn off automatic goods receipt and classify your batch through the
    pop-up that is presented during MM goods receipt.
3. Do not create your batch during Order Processing. Instead have the
    system create it during confirmation and at this time you will be
    able to classify your new batch from the Goods Movement screen
    COMPONENT>BATCH MANAGEMENT>CREATE BATCH.
Note :
If you want that your batch is classified in the background you can set
in the transaction OMCV (classify batches within goods movement
overview) that the classification is to happen in the background. You
can then utilise the user exit EXIT_SAPMM07M_004 to valuate the
characteristics if it is valid for
your release.
Regards,
Sabine

Configuration of Batch classification in MIGO Tcode

Similar Messages

Maybe you are looking for