Configuration of Business partner

Dear SAP Guru's
i am new to SAP CRM. can anybody explain how to configure a Business partner.
is the procedure same for all sales , ecommerce, online sales and other.
Thank you in advance.
krishna

Hi,
From your statement it is still not very clear what exactly is the requirement. Are you look for initial configuration of the Business Partner with the backend ERP    system ? Or are you looking for something else?
Business Partner is a master data and the same is applicable for all the scenarios,
MARKETING
SALES
SERVICE.
For a detailed description on the business partner, have a look at the following link:
http://help.sap.com/saphelp_crm70/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm
Thanks and Regards,
Samantak.

Similar Messages

  • Problem with BDOCS Business Partner CRM - PSCD(R/3)

    I have a problem with BDOCS (Middleware, Data Exchange Synchronization).
    I configured only Synchronization for Business Partner Type “2” Organization and “3” Group”(In the Initial Load).  However, when PSCD add or modify “Identification Number” (table : BUT0ID) for other types of Business Partner, for example type “1” Person, the BDOCS generate a update in CRM (inbound queue) specifically produced a show processes in PSCD, because the table  TRFCOUT progressively grow, and also in the outbound queues table.
    Do you have any idea what happen ??
    or if i can use a kind of filter to the Bdocs online??
    Because i only can filter the BDOCS in the initial load but not in the bdocs online.
    thanks in advanced

    Hi,
    Configuring the business partner integration from R/3 is done in the PIDE-transaction on the R/3-side and in the customer_main object on CRM-side. Simply enter the filter settings in the object, sync it with R/3, check your filter settings in table CRMFILTAB on the R/3 side.
    Grtz,
    Michael.

  • E-Recruiting: Business partner - Telephone

    Hi All,
    When ever I create a user in E-Recruiting, by default a BP  will be generated. If we go to BP transaction, in Address independent data - telephone number is empty.
    So how to update the telephone number in BP?
    Please share your ideas.
    Thanks,
    Anil

    Hi,
    unfortunately the first given solution will not work for e-recruiting. E-Recruiting uses fields to tag the telephone numbers which are not available in the standard screen configuration of business partner. Furthermore E-Recruiting creates entries in infotype 5110 (table HRP5110) without these entries the data from business partner will not be read. Once this information is in place it is possible to change the number in business partner directly as the not visible fields stay the same.
    The standard way of maintaining this information is the e-recruiting application itself. The configuration of available communication channels defines which / how many telephone numbers are available. The e-recruting application shows the fields accordingly.
    For internal candidates the new ALE should also allow to transfer telephone numbers from IT 0105 to the business partner. When debugging this coding I saw lines for some subtypes similar as the ones for subtype 0010 email but I have not tried this in real live so far.
    Best Regards
    Roman

  • Fast Order Entry - Business Partner Search / Suggestion

    Hi Experts,
    is there a way to configure the Business Partner suggestion as shown on the screenshot? Is it somehow possible that I enter the name of the partner , lets say 'miller' and the system automatically suggest the corresponding business partner 1000US_A40 (= Miller Furniture )? Or is the only way to use F4? The goal is to manually create an order as fast as possible, therefore the search with F4 is too time consuming.
    Thanks a lot
    Best Regards,
    Tom

    I've noticed that in my use of the system, in similar scenarios for example; selecting a resource it will only suggest items based on the specific field you're entering.
    With our resources (vehicles, trailers) the Fleet ID number is used as the identifier field but the operational staff tend to refer to equipment by it's registration number. So if we try to type in the registration number (a different field), the suggested values do not recognise it.
    The screen capture above in the original post appears to display this as well - field holds the identifier number but the request is for part of the description field to be entered and used within the suggested values. The connection here is that the description field is similar to our registration field in that they aren't the primary identifier fields.
    In regards to Bharath's suggestions, (1) appears to already be enabled since the suggested values have popped up. The questions is whether or not a search term relating to a field (that isn't the Ordering Party ID) can be typed and the suggested values will recognise the connection.
    Granted, I understand this isn't an answer. I simply wanted to weigh in on this discussion as I face a similar issue that we're unsure of how to solve.
    Regards
    Justin

  • Business Partner Replication to SAP ERP- ping getting error

    Hi,
    i'm configuring the Business Partner Replication to SAP ERP ,while ping im getting(Checking connection failed).
    please refer the image below.
    Could you please give me the suggestion.
    Regards,
    Prasad

    http 403 basically indicates that your authentication towards HCI does not work proper. Please describe here how your authentication settings in the Communication Arrangement and on the corresponding IFlow is defined.

  • WS20000263 Workflow configuration in Treasury (Business partner approval)

    Hi Experts,
    Currently we are doing an SAP Upgrade from 46C to ECC 6.0 (Enh. 4) and in Treasury we cannot solve a problem. There is a workflow (id: WS20000263) which is used in case when the BP is created or changed. This workflow was used in 46C, but in ECC 6.0 this is changed (in the new system the BP is managed in a different way as it was in 46C - Central Business Partner).
    The problem is that the workflow is not working: I am not even able to do the proper configuration. There are some contradictory parts in SAP help which confuse me! (i.e.: in SPRO in "Active Release" config point, it says "activate the release object CBP SAP Business Partner". But the table - which contains this configuration point - is filltered for "ZBP" object, which means i can activate only the "ZBP" object and never the "CBP" object. The other point is that I cannot add "CBP" value in a "proper" way...)
    I hope any of you faced with this workflow configuration and help me out or at least give me some advices.
    Thanks in advance for your help!
    Best Regards,
    Attila

    Hello Atrtila ,
    Good Morning.
    can you please tell me how your problem is solved.i am facing exactly the same issue in our system.exactly same thing.workflow release is getting triggered on changing any business partner role but not triggering at the time of creating a new line in business partner role .
    please help.
    Vijay Agarwal.

  • Business partner configuration steps in treasury

    Reqiure Business partner configuration steps in treasury.
    While creating business partner i get the message :Personal address doesnot exist.
    How to rectify this?

    No reply.Closed.

  • Configurations to post 850 from Business partner to our SAP system

    Hey Guys
    i m doing a EDI 850 to IDOC scenario and need to send Functional acknowledgment back to the business partner.
    The business partner sends us the Purchase order via VAN ,we do the message mapping within XI and then post it to our SAP R/3 system as ORDERS05.
    so this scenario is a simple 850->XI->ORDERS05.
    so i configured a Seeburger FTP sender adapter,gave the mapping name under modules tab ,configured a received IDOC adapter and posted the message to SAP R/3 system.
    Now the issue is in sending the acknowledgement 997 back to the business partner.
    My questions are:
    1)How will the acknowledgement be triggered,is it automatically triggered or we need to do something with IDOC STATUS.SYSTAT01?
    2)How will i configure my adapters to send the acknowledgement back to the Business partner.i guess i need to use split997,will it be configured as sender or receiver?
    Thanx
    Saif
    Pl:I have gone through all the links on seeburger.

    Hi Saif,
    if you have to do a functional ack. This is a standard functionality available in Seeburger.
    If you see your sender communication channel ther will be modules ....like
    Classifer-> BIC>Spliter--->CallAdapter
    the BIC will do the Main mapping (for the fun. ack. 997)  and child mapping ( for your PO) and post two messages into XI server.
    You can map the main mapping payload and send it back to the business partner as a functional acknowledgement (997)
    if you are refering to Orders Ack. ie, the ack. of successfully posted Orders in the backend.
    You have to trigger an outbound ORDERSP  onces the inbound ORDERS05 idoc posted by maintaing the proper Out put types .
    Map this outbound ORDERS idoc to EDI 855 structures and send it to the VAN of business partner.
    Regards,
    Sunil.

  • Business Partner Duplicate Check - Threshold Configuration

    Hi,
    I had setup the duplicate check for Business Partner in CRM system.
    In SPRO -> SAP NetWeaver -> Application Server -> Basis Services- > Address Management -> Duplicate Check -> Activate Duplicate Check and Determine Limit for BAPIs, I understand the "Threshold BAPIs" is the percentage that determine which duplicate business partner similarity to be display in the Dialog Box.
    E.g: If I set 80 in this box, then only business partner with similarity greater than or equal to 80% will display in the dialog box.
    But, in SPRO -> SAP NetWeaver -> Application Server -> Basis Services- > Address Management -> Duplicate Check -> Set Limit for Duplicate List in SAP Dialog Boxes, I don't understand the value in "Threshold SAP Dialog Box" is configure for. The value that I had setup in here make no difference for me.
    Does anyone understand how this threshold works in duplicate check? If yes, kindly please provide me an example for better understanding.
    Thank you.
    Regards,
    Edison Wang

    Hi,
    Anyone that have experiences in BP Duplicate check, can help?
    Thanks
    Regards,
    Edison

  • Business partner matchcode configuration.

    Dear all,
    I would like to delete match codes for business partner and create new one.
    As far as I know transaction BUS10 is the configuration for the purpose.
    But,  I don't know what to do with this transaction.

    Hi,
    Where you deploy the report,will actually depend on the exact requirement.
    E.g : Suppose you want to control the matchcode for any BP that is created, then you need to make a modification in the code executed during BP creation. Specifically, you can look at BUPA_CREATE_FROM_DATA or BUPA_CENTRAL_CHANGE if you are using BAPIs or Web UI. You don't need a report for this, just a few lines of code inserted in the right place, or a Z function module in the right exit.
    If you want to change the matchcode for BP's that have already been created, you need to run the report anytime you wish, when the particular BP is not being used. Its a very simple report that just modifies 2 fields of the BP.( You can use the command TRANSLATE to convert the text to upper case)
    Regards,
    Rishu.

  • Business Partner - Screen configuration

    Hi All,
    When i am trying to change the screen sequence of Business partner roles or description of screen tabs,  using the screen configuration option provided in SPRO, the changes made are not reflected in the BP Transaction code. When I am tring to add new screen, systems showing a message VCT method not loaded. Can anybody please throw some light on this?
    Thanks,
    Bala.

    Hi Bala,
    please check if the SAP note 409700 is helpful for this issue.
    Regards, Franz

  • Creation of Business partner by using the vendor master

    Dear all ,
    I have a requirement as follows. I  Have already vendor master created  in MM .Now the requirement is  while creating Business partner I have to use this vendor as the business partner .
    Can experts suggest the possibility of this .
    Regards.
    Arjun.

    Hello Arjun,
    Yes, this feature also works in 4.7. What has happened is that in ECC 6.0 the BP functinality has been totally redefined with a lot of automations. As such, if properly configured then in ECC 6.0 there is no practical use of the FLBPD/FLBPC Tcodes. However, in 4.7, both these traqnsactions should be working fine. The SAP ntes that I have mentioned are however only for ECC 6.0.
    Kind regards,
    Suvarghya Dutta
    Edited by: Suvarghya Dutta on Nov 27, 2008 4:02 PM

  • Can you assign multiple customer masters to one Business Partner in R/3?

    We are trying to configure SAP Business Partners in ECC5.0 but it seems the relationship between a business partner and a customer master is one-to-one so a business partenr cannot have multiple customers (table BD001 only allows for a single entry).  Does anyone know if it's possible to assign multiple customer masters to one business partner?  If so, is there any documentation available?
    Many thanks.

    We are trying to configure SAP Business Partners in ECC5.0 but it seems the relationship between a business partner and a customer master is one-to-one so a business partenr cannot have multiple customers (table BD001 only allows for a single entry).  Does anyone know if it's possible to assign multiple customer masters to one business partner?  If so, is there any documentation available?
    Many thanks.

  • Adding New attributes to Business Partner Data

    Hi Experts,
    I am new to SAP CRM. The requirement with me is that i have to add two attributes 'County' and 'Demographics' (both Text Fields) to the Business Partener Master. Is there some way to achieve this by configuration like by set types etc. or will i have to use workbench to add these fields. Please Help?
    Thanks.
    Rahul

    Hello Rahul,
    I think the COUNTRY should already be present in the Business Partner master data. Please follow the steps below to find the BOL Structure of the BP Address data. In this structure all the address related data would be present. I hope the fields which you are looking should already be present in this structure.
    1) Run the txn GENIL_MODEL_BROWSER
    2) Give the component set as BP_APPL
    3) "BuilHeader" is the root object. Navigate to the relation "BuilStandardAddressRel" under the root object.
    4) The child object under this relation is "BuilStandardAddress". In the attribute structure, you will find the structure CRMST_ADDRESS_BUIL . This structure holds the data.
    To check the values using this BOL model, follow the steps below
    1) Run the txn GENIL_BOL_BROWSER
    2) Give the component set at BP_APPL
    3) Go to the search object "'BuilHeaderAdvancedSearch'". Give the advanced search criteria and search.
    4) The result would be displayed and try navigating to the "BuilStandardAddress" child object as mentuioend in the steps above.
    Hope this helps.
    Regards,
    Vinay

  • E-Recruiting 6.0: Business Partner Role For Branches

    Hi Experts,
    In the IMG, SAP E-Recruiting > Basic Settings > Enterprise Structure > Define Business Partner Role for Branches
    Can anyone help in the following:
    1) What is the purpose of Business Partner Role and how does it relate the Branches? Or how can i make use of it?
    2) If i am going to maintain the Company & Branches via the Administrator function instead of IMG, do I still need to configure this step: Define Business Partner Role for Branches
    Thanks.  Will reward points for any helpful tips.
    William

    Hello William,
    the Business Partner is an application / module which belongs to the base components of the SAP. It is used and partly extended by various other applications / modules. Next to E-Recruiting it is used for example by CRM and the financial service solution (FS-CS, FS-PM, FS-RI). All of these modules can put their data for a person or an organization into the same tables. Depending on the installation / system environment or even within one single module the requirements for available fields and business checks as on authorization differ between kinds of business partners (e.g. in FS-CS the commission solution for the financial service sector knows external agents and internal employees which have to be treated differently). The business partner is the element to assign the logical / business role in which a person is handled by the system.
    For E-Recruiting you have 2 kinds of business partners, too. On the one and there are people being candidates and on the other hand there are branches of your company which hire people. The configuration allows you to seperate them if you need to identify anywhen which business partner is a branch and which is a candidate. So far I never tried if this is really working as there is no real use for this I never set it up. The attributes and the business checks are the same anyways.
    Hope that helps a bit to understand the context
    Best Regards
    Roman Weise
    PS: please remember that you have to maintain the branches via administrator bsp application. Using the IMG entry won't work.

Maybe you are looking for