Configuration of BW 7.0 in coordination with ECC 6.0
The SAP version is "4.6c", and BW is 7.0 (BI).
Now , user wanna upgrade SAP version to ECC 6.0
What should to be configured within BW ?
Just migration DataSource from 3.x to 7.0 ?
Tks !
Dear ,
There will be some Premigration activitities and some post migration activities.
Premigration :
1.You need to load all the deltas to BW and there should not be any entry in the delta Queue.
2.No LIS* jobs should be running in R/3 during migration.
3.You don't need to migrate to BI 7.0 datasources unless you want to ,in anycase your datasources are emulated as you are using BI 7.0.So it is not necessary to migrate datasources.
4.Stop all your Process Chains after clearing the delta queue after multiple run of the infopackages or these chains.
Post-Migration:
1.Normally the Source System Connectivity is affecte by Migration so you need to repair your connection from RSA1.
Go to RSA1 to your respective ECC source Sytem and right click-->Repair
2.Replicate all the datasources again and activate all your transfer rules.You can use FMs to do that in background..
3.Test the deltas are working fine..
4.Test the extraction jobs /infopackge runs..
Thats all
Regards,
RK
Similar Messages
-
SAP SRM 7.0 with ECC EHP 4 components to execute scenario
Hi All,
I am new to SAP SRM 7.0.Could you please let me know that what are all the components needs to be in place to execute the technical scenarios and business scenarios.I had an hands on experience on SAP SRM 5.0 with ECC 6.0 backend.
Some where i read that there are lot of configuration changes when we integrate SRM 7 with ECC EHP 4.Do we need to have PI 7 for executing Centralized contract and plan driven procurement scenario?Please guide me to have some exposure towards higher version.Thank you in advance.
Best Regards,
praveenHello,
You can refer the INSTALLATION AND UPGRADE INFORMATION , Master guides etc maintained at the below mentioned location which will answer all your query's here.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 .
Best Regards,
Rahul -
How to configure a shell and tube heat exchanger with Lab VIew to get data
HiI
In our undergraduate chemical engineering labboratory we want to configure our shell and tube heat exchanger with a DAq and Lab VIEW to get information about the temperaure (of the cold fluid stream being heated), the pressure (of the steam on the shell side of the heat exchanger) and the flowrate (of the water being heated).
Can anyone suggest thermocouples, pressure transducers and flowmeters to fit between the heat exchanger and the DAq?
P.S. the heat exchanger is already fitted with thermometers, a pressure gauge and a rotameter but we don't know how to connect these hardware to the DAq
Solved!
Go to Solution.It sounds like you have enough information to pick out appropriate sensors, you just need to do the research. I would start looking through the Omega catalog, or give them a call - they're usually helpful. I can't take the time to spec out parts for you - that would be a lot of time spent on someone else's project. Most pressure sensors put out either a 4-20mA or 0-5V signal, either of which you can read through an analog input on a DAQ; measuring a 4-20mA signal requires a resistor to convert to voltage. Most of the NI DAQ boards can read a thermocouple on an analog input, but make sure that your hardware does support reading thermocouples. For accurate readings, use a device that has built-in cold junction compensation - for example, the SCB-68 connector block - and for the most accurate readings, get a board specifically designed for temperature measurement.
For the flow measurement, a standard, simple solution is an orifice plate. You put a differential pressure transducer across it, look up the appropriate equations, and use them to calculate the flow rate given the density of the fluid (which you'll be able to calculate from the pressure and temperature, since steam tables are widely available). There are other differential pressure devices available as well - at a previous job we used a V-Cone from McCrometer. If you call them they'll spec one for you - but get an approximate cost first to make sure it's within your budget. -
Hi,
I am installing the SharePoint-2013 on development virtual machine. and i have the following environment.
Windows server : 2012
SQL server 2012(enterprise edition)
Active directory(domain) is configured on same server.
for SharePoint configuration purpose i had created SP_farm account with SQL server DB_creator,security admin etc rights.
even though m facing this issue related with socket exception.
Error in log file :
04/08/2014 12:26:33 1 INF Trying to see if port 35513 is free on machine SHAREPOINT2013. Min port we will try is
1024, Max port we will try is 49151
04/08/2014 12:26:35 1 INF A SocketException was thrown with SocketError ConnectionRefused
04/08/2014 12:26:35 1 INF Connect has been refused for port 35513, so we will consider this a free port
04/08/2014 12:26:35 1 INF Have not found a free port yet. Number of tries is 1. Min port we will try is 1024, Max
port we will try is 49151
04/08/2014 12:26:35 1 INF Adding port 35513 to the exclusion list so it is not chosen again during this run
So m bit confuse about is this error related to network issue or something else that i have to configure on server.
any suggestion or reply will be appreciated..!:-)
ShivIs the firewall turned on?
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos -
Hello!
I want to write 1 digital port from PXI-6536 with streaming to TDMS file.
I'm writing by 'DAQmx Configure Logging.vi' and become TDMS file with 8 boolean channels.
How can I write to 1integer channel?
Attachments:
1.JPG 27 KBHey Atrina,
The actual data stored on disk is just the raw data (that is, a byte per sample in your case). It's really just a matter of how that data is being represented in LabVIEW whenever you read back the TDMS file.
I'm not sure if there is a better way to do this, but here is a way to accomplish what you're wanting:
Read back the TDMS file as a digital waveform. Then there's a conversion function in LabVIEW called DWDT Digital to Binary. This function will convert that set of digital channels into the "port format" that you're wanting. I've attached an example of what I mean.
Note: When looking at this VI, there are a few things that the downgrade process did to the VI that I would not recommend for these TDMS files. It added a 1.0 constant on the TDMS Open function, and it set "disable buffering" on the TDMS Open function to false; you can get rid of both of those constants.
Message Edited by AndrewMc on 01-27-2010 11:21 AM
Thanks,
Andy McRorie
NI R&D
Attachments:
digitalconvert.vi 13 KB -
Configure BPEL 10.1.2.0.2 with JDeveloper 10.1.2.1
I use JDeveloper version 10.1.2.1. Is there a way to configure BPEL 10.1.2.0.2 with it, as a plug-in? Because otherwise, I must use an JDeveloper version that comes with BPEL and another one for my other applications (configure CVS, take care about patches, etc.). If not, why is not BPEL distributed as plug-in?
kind regards,
VladimirIf memory serves me right, I think a BPEL addon pack is being created for the latest version of JDeveloper. I guess we just have to be a bit more patient!
-
ESS Configuration with ECC 5.0
Hi
I am trying to configure ESS with ECC 5.0 as the HR server
My J2EE system is WAS 7.0 with EP 7.0 and patch level 12.
I am getting the following error when I am trying to get the ESS pages in EP
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcXssMenu.AreaConfig.AreaConfig_Output.Serviceinfo): structure field Helperservice not found
I was successfull in configuring ESS with ECC 6.0. I did the same configuration for ECC 5.0 also.
Can anybody help me
ThanksHi Jeevan,
Please check your land scape is as per the notes:
1007341 SAP ERP 2004/2005 - supported ESS/MSS system landscapes
824757 Dependencies between SAP ERP component lists
1034385 BP ESS/MSS ERP2004 and ERP2005 on EPNW04s
1004528 SAP Self Services: Business packages and components
BR, Abdul -
Configure CRS2008 to using AD and Kerberos with Java application servers.
Hi All,
I have configure CRS2008 to using AD and Kerberos with Java application servers. Domain Controller is installed on W2K3 Server. In addition, CRS2008 is installed on another W2k3 Server.
I have create service account in domain controller: CMSACC
I have create two user account: CRuser1 and CRuser2
I have create domain group: CRSGroup
After I had run the setspn in domain controller,I got the message at below:
Registered ServicePrincipalNames for CN=CMSACC, OU=TEST, DC=BD, DC=com:
BOBJCentralMS/BDMGTSRV.BD.com
CMC Setting:
AD Administration Name: BD\administrator
Default AD Domain: BD.com
Add AD Group(Domain\Group): secWinAD:CN=CRSGroup,OU=TEST,D=BD,DC=com
Service principal name:BOBJCentralMS/CMSACCatBD.com
I have create a WINNT folder in root directory.Moreover and save bcsLognin.conf and Krb5.ini at here.
bscLogin.conf:
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
krb5.ini:
[libdefaults]
default_realm = BD.com
dns_lookup_kdc = true
dns_lookup_realm = true
[realms]
forwardable = true
BD.com = {
default_domain = BD.com
kdc = BDMGTSRV.BD.com
I have tested the Kerberos,using kinit CMSACCatBD.com password, and got error message at below:
Exception: krb_error 41 Message stream modified (41) Message stream modified
KrbException: Message stream modified (41)
at sun.security.krb5.KrbKdcRep.check(KrbKdcRep.java:53)
at sun.security.krb5.KrbAsRep.<init>(KrbAsRep.java:96)
at sun.security.krb5.KrbAsRep.getReply(KrbAsRep.java:486)
at sun.security.krb5.KrbAsRep.getReply(KrbAsRep.java:444)
at sun.security.krb5.internal.tools.Kinit.sendASRequest(Kinit.java:310)
at sun.security.krb5.internal.tools.Kinit.<init>(Kinit.java:259)
at sun.security.krb5.internal.tools.Kinit.main(Kinit.java:106)
My problem is failed to logon CMC and infoview and got error message at below:
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserNameatDNS_DomainName, and then try again.
Actually, I am sucessful to logon Business View manager with CRuser1. However, I fail to logon CMC and infoview and got the above error. Have you any suggestion to solve this problem?
Ken.if you can logon with client tools then that should be an indication that the service account running the CMS IS working! Good news.
So the problem is likely with the java portion (krb5/bsclogin or java options)
If the files are in c:\winnt\ (if not copy them there) and perform c:\program files\business objects\javasdk\bin\kinit username
then enter and password/enter again
Probably get the same message. To note in your krb5.ini all domain info must be in CAPS (the .com appears to be in lower case)
kinit works with just the krb5.ini, java SDK and AD (removing BO config and the service account from the picture). Once that works if your java options are specified properly you should be able to login to CMC/infoview.
also 1 last point. Add udp_preference_limit = 1 to the krb5 lib defaults section
libdefaults
default_realm = BD.com
dns_lookup_kdc = true
dns_lookup_realm = true
udp_preference_limit = 1
Regards,
Tim -
How I can configure 2 EP 7.0 server for SSO with ECC 6.0?
Hi,
How I can configure 2 EP 7.0 server for SSO by using SAP Logon ticket with same ECC 6.0 back end?
Developement EP 7.0 SP14 is already configure with ECC 6.0 back end now I want to configure my local EP 7.0 SP9 (Sneak Preview) server with same ECC 6.0 Development.
How I can acheive this?
I really appreciate if some one guide me.
Thanks.
Ashish.Hi,
You have to follow the SSO steps.
1.Create RFC Destination in SM59
2.Create RFC Destination in Visual admin
3.Export verify.der certificate from portal
4.Import verify.der certificate to R/3
5.Create system alias
6.Export R/3 certificate from R/3
7.Import R/3 certificate to portal
8.Maintain the SSO parameters in RZ10
Please check the below link also.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/4d/dd9b9ce80311d5995500508b6b8b11/frameset.htm
Regards,
Bala. -
Need Steps for Configuring BI 7.0 with ECC 6
Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran TelkarHi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy -
How to Configure and Use Oracle's JMS Connector with Tibco EMS
Jeff,
I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
While deployment not able to get the 'TibcoJMSReference',
As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
<resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
could you help to resolve the issue?
Error
Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'foundHi,
I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents. -
How to Configure a Servlet Chain Using MIME Types with weblogic5.1?
Hi ,
I want to configure a servlet(cocoon) in weblogic 5.1 such that the
servlet so configured is invoked each
time a response with the mime-type "text/xml" is generated.
1.) will weblogic support to configure a servlet with a particular
mime-type so that it post-process any
servlet's response with the corresponding mime-type?
2.) if not what is the alternative?
Thanks
sumanth
[sumo.vcf]
We suggest that use the request dispatcher interface instead. Servlet
chaining is not a standard's based possibility.
Michael Girdley
WLS Product Manager
Sumanth Chinthagunta <[email protected]> wrote in message
news:[email protected]..
> Hi ,
> I want to configure a servlet(cocoon) in weblogic 5.1 such that the
> servlet so configured is invoked each
> time a response with the mime-type "text/xml" is generated.
> 1.) will weblogic support to configure a servlet with a particular
> mime-type so that it post-process any
> servlet's response with the corresponding mime-type?
> 2.) if not what is the alternative?
>
> Thanks
> sumanth
>
-
How to configure my oracle jdeveloper 11g preview 4 with oracle 8i database
hi every one
my requrirement is to configure my oracle jdeveloper 11g preview 4 with oracle 8i database with (thin driver)
thanks in advancePrapan,
JDev 11g TP4 comes with 11g JDBC drivers, which do not support connecting to any database v 9.0.1 or earlier.
So, back to you... depends upon what you want to do. If you want to write your own code to connect to a database using 11g, get ahold of some JDBC drivers that support 8i and have away. If you're talking about getting the database development stuff (e.g. the embedded SQLDeveloper) to work, you're probably out of luck.
So, please define "configure my oracle jdeveloper 11g preview 4 with oracle 8i database"
John -
CF 11: Configuration a datasources to MS SQL Backend with encryption enforced by SQL Server
Hello List;
I have the following problem: Configuration a datasources to MS SQL Backend with option encryption enforced (by SQL Server).
I goggled in the internet for the configuration of the datasource and find multiple articles/advices:
Configuration a datasource type other with jtds.jdbc.Driver and manual configuration of the connection string:
1. Downloading the driver and copy to the cfusion/lib directory: Done, the driver was recognized by coldfusion after a restart of the service.
2. Copying the ntlmauth.dll to the bin directory of jre/bin: Done
3. Configuration of the jdbc URL: jdbc:jtds:sqlserver://xxxx.xxx.xxx.net:1433/db: Works, I don’t get a connection timeout
4. User and PW: Works: I don’T get a login failure.
5. Advanced settings: Connection String: Maybe here is something wrong: EncryptionMethod=SSL; TrustStore=Path\sqlstore.jks; TrustStorePassword=xxx; ValidateServerCertificate=true; HostNameInCertificate=xxx.xxx.xxx.net;
Error Message (Coldfusion logs/stack trace): I/O Error: DB server closed connection. SQLException while attempting to connect: java.sql.SQLException: I/O Error: DB server closed connection..
Has anybody experiences with this topic/can give me advices/send me screenshots.
frankHi Stephen;
we tried: add EncryptionMethod=SSL; ValidateServerCertificate=false; to the connection string;
And it doesn't work.. Are you sure, that you have enabled encryption enforced in your SQL-Server Settings.
Oherwise the connection works, but the Connection is not encrypted:
Coldfusion lies!
You can controll this by veryfining the open connections on the sqlserver with the query:
SELECT net_transport, protocol_type, encrypt_option ,auth_scheme, program_name FROM sys.dm_exec_connections AS c JOIN sys.dm_exec_sessions AS s ON c.session_id = s.session_id cross apply sys.dm_exec_sql_text(most_recent_sql_handle) AS d
There you can see the jtds Connectionand the (programname) and the encryt_option (must be true).
frank -
How do I configure my icalendar so that it works with mail?
How do I configure my icalendar so that it works with mail?
Hi gsk1122,
Welcome to the Support Communities!
I believe you are asking about iCloud, which is the best way to synchronize your email, calendar, contacts and notes between your computer and your iPhone, iPad or iPod Touch.
The link below will explain what iCloud is and how to set it up on your devices.
Apple - iCloud - Learn how to set up iCloud on all your devices.
http://www.apple.com/icloud/setup/ios.html
If this is not what you are asking about, please reply with more specifics.
Cheers,
Judy
Maybe you are looking for
-
I am unable to activate my iPhone 3gs after installing ios 5. please help.
hi all i have updated my iphone 3gs to ios 5 but after the upgradation i am unable to activate my phone using itunes. my itunes is unable to detect my phone and it says that the phone is nt registered. also i am unable to find my back in itunes. plea
-
BEA Liquid Thinker Site not working for me
Hi, I am using Firefox 2.0. on Linux and with Flash Player 9 installed but the Liquid Thinker site still doesn't let me in. What can I do? Many thanks EE
-
PS cs3 crashing: 20days left
hey guys, ive got the trial version of CS 3 10 but when i open it and go to activate later it crashes, ive tried reinstalling/repairing also gone to delete registery etc thus far nothing has worked. its opens ok until i hit quiet/activate later why w
-
Can't create a new account with Godaddy
My incoming is Mail.mydomain.org My outgoing is smptout.secureserver.net I set my Name and Password but mail just sits and hangs. does nothing. Anyone have this problem and could you help? Thanks Phil
-
10.2.0.3 Patch Help....
Hi Techies, We have installed Oracle 10.2.0.1 and upgraded it to 10.2.0.3. Now for an application installation I have to install 6038241 patch for Oracle 10.2.0.3. When i check the readme notes of it that says that I have to upgrade the timezone to v