Configuration of controlling steps

Hi sap gurus,
I need help in configuring the controlling steps. I'll tell my requirements:
we have 2 types of products being manufactured:
1. standard products(made to stock) and 2. non standard products(made to order)
My mangement wants to be able to get the information about the amount of labour spent for each activity like assembly, fabrication, anodising etc. (as far as standard products are concerned), apart from the overhead costs
and as far as non standard products (we call them projects), the information that the management wants to capture is the costs incurred and revenues earned.
SO, I think i need to go ahead and configure internal orders.
So, as far as standard products are concerned, I think I need to go ahead and configure activity based costing and overhead costing.
If I'm wrong plz advise me(IF THERES SOMETHING ELSE I NEED TO CONFIGURE) on that and based on my requirements, if somebody has any material or documents, plz do forward that to me.
MAIL ID: [email protected]
regards
sandhya kiran.

can anyone help me on this please
regards
sandhya

Similar Messages

Alerts in Control Step for BPM

Hi.
Is it possible for me to use the Control Step in a BPM to trigger a indication of a error in sxmb_moni?
Fo example. My BPM handels a message that fails in a mapping. In the exception bransch I have a control step thattrigegrs an alert. Will this alert show up in sxmb_moni?
If so is there anybody out there who has a blog or guide on how to setup that configuration?
BR
Kalle

Is it possible for me to use the Control Step in a BPM to trigger a indication of a error in sxmb_moni?
yes
In transaction ALTCATDEF create an alert category and do not forget to check the Dynamic Text checkbox......then go to RWB ---> Alert Configuration and creat an alert rule for Integration Engine ....this willl give you all the alerts that happen in Integration Engine or in your SXMB_MONI
Regards,
Abhishek.

Triggering alert in control step?

how to trigger alert in control step of BPM? please guide me the differenent situations we use this alert and how we trigger?

hi,
please go through these links,
Alerts
Configuring scenario specific E-mail alerts in XI-CCMS: Part - 1
The specified item was not found.
transaction handling in XI
The specified item was not found.
regards,
navneet

Assigning digital port to control stepping motor

Hi
I want to control optical encoder, DC motor, Digital camera, Stepping motor, Electric lamp using LabVIEW and Data aquisition card. I am
facing problem in interfacing stepping motor to DAQ device and configuring the digital output port using measurement and automation explorer.
I am attaching the document showing configuration of measurment and automation explorer. I want to assign four line digital port for controling
stepping motor. I want to assign DIO0,DIO1,DIO2,DIO3 for stepping motor. But the signal is going to other ports as well. Please somebody help me
out of this problem.
Jayaprakash.
Attachments:
Measurment and automation explorer.doc ‏99 KB

Answered on your other post.

Controlling steps

hi
please can send controlling steps
thank you
saireddy.b

Dear ,
Below steps should be perform for configuration for Controlling.
Maintain Controlling Area
Maintain Number Range
Define Validation
Define Substitution
Automatic Creation of Primary & secondary cost element
Define Standard Hierarchy
Define Origin Group
Define Costing Sheet
Cost Component Structure
Define Costing Variant
Hope above will helpful.
GOPAN.

Installing and configuring Grid Control 10gR3

I want to install and configure Grid Control 10gR3, This is my first time experiance for this project, need help, what steps i should take? Like first create 10g DB as repository, then install grid control and how to install/configure agents, want to clear my concepts

Do not quite understand your question. The documentation link you provided is the Installation and Basic Configuration Guide for Grid Control 10.2.0.3. The document contains installation and configuration information.

Dump on screen when configuring Process controlled workflow

Hi Experts,
I am facing 1 problem in SAP SRM 7 ehp1. I am configuring Process controlled workflow. Previous workflow settings was Application controlled workflow as its been upgraded from SRM 5. If i run a RFX (BUS2200) cycle in application controlled workflow environment, it works flawlessly.
But when i change my workflow framework to process controlled workflow for all Business Objects. I face a dump when I am creating an RFX. The dump on the portal is:
http://dl3803.ltisap.com:8040/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif
DATREF_NOT_ASSIGNED
No access possible via the 'NULL' data reference
Method: PARTICIPATING_IN_ACTIVE_WF of program /SAPSRM/CL_PDO_DYN_MDA_WF_ADJ=CP
Method: EDIT_DURING_WORKFLOW of program /SAPSRM/CL_PDO_DYN_MDA_WF_ADJ=CP
Method: /SAPSRM/IF_PDO_META_CONF_BO~GET_BO_HDR_ACTION_METADATA of program /SAPSRM/CL_PDO_META_CONF_PROV=CP
Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_BO_RFQ====CP
Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_BO_RFQ_ADVCP
Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_HANDLER===CP
Method: UPDATE_ACTIONS of program /SAPSRM/CL_CH_WD_MAP_IDENT====CP
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH of program /SAPSRM/CL_CH_WD_MAP_IDENT====CP
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH of program /SAPSRM/CL_CH_WD_IDEN_MAP_RFQ=CP
Method: OVERRIDE_LEAVE_INIT_SCREEN of program /SAPSRM/CL_FPM_OVRIDE_OIF=====CP
& when i check in st22. I get the dump as:
Category               ABAP Programming Error
Runtime Errors         DATREF_NOT_ASSIGNED
ABAP Program           /SAPSRM/CL_PDO_DYN_MDA_WF_ADJ=CP
Application Component SRM-EBP-PD
Date and Time          17.12.2011 15:46:56
and get dump at:
1 method PARTICIPATING_IN_ACTIVE_WF.
2   " this method returns ABAP_TRUE if the logon user has an active work item,
3   " i.e. he participates in an active approval workflow process.
4
5   DATA lv_curr_workitem_id    TYPE /sapsrm/wf_workitem_id.
6   DATA lr_process_info        TYPE ref to /SAPSRM/S_PDO_WF_PROCESS_INFO.
7
8   " the default:
9   rv_participates_in_active_wf = abap_false.
10
11   " The scenario is not valid for application-controlled workflow:
12   " Any agents who may edit the document (approver and requester)
13   " enter "Edit" mode right-away. No special handling possible.
14   lr_process_info = io_apf_md_context->get_process_info_ref( ).
>>>   IF lr_process_info->wf_version NE /sapsrm/if_wf_process_c=>GC_APF_VERSION_0200.
16     return.
17   endif.
18
19   " check if a valid workitem exists
20   lv_curr_workitem_id = io_apf_md_context->get_workitem_id( ).
21   IF lv_curr_workitem_id IS INITIAL.
22     RETURN.
23   ENDIF.
the only configuration I change in the system is I changed the workflow framework to process controlled workflow.
Kindly help.
Thanks
Anand

Hello Anand,
As per standard SAP recommendations the application-controlled workflow framework is only intended to be used if you are upgrading from SAP SRM 5.0 or earlier and you need to continue using your existing work-flows.
The default workflow framework setting is the process-controlled workflow from SRM 6.0 on-wards and the user will be provided a option to switch to the application-controlled workflow framework. The option to switch to process-controlled workflows is available only after you have once switched to application-controlled work flows but there will be a big caution that " If you switch from the application-controlled workflow framework to the process-controlled workflow framework; once a process-controlled workflow has been run, it is not supported that you switch back to application-controlled work-flows".
As per the details given i got a feel that we have tried executing the scenario by switching between application and process controlled workflow and hence the system have become inconsistent and its dumping.
I suggest you to raise a OSS ticket to SAP to resolve the issue.
Best Regards,
Rahul

Dynamic alert messages in BPM control step not getting created

Hi All,
in transaction ALRTCATDEF, i have specified dynamic text for my alert category...........
in my BPM there are 3 control steps.....and i am using this alert category in all of my BPM 3 control steps..... but the alert messages in my 3 control steps are different.........But these alert messages(which i am giving in BPM) is not coming in the alert mail in alert inbox but it gives the common message in long text(which i gave in long text while defining the alert category)......
So can anybody suggest me why my BPM alert message is not coming in the alert generated by BPM control step in the alert inbox of runtime workbench.
Thanks,
Rajeev Gupta

Hi Rajeev,
Please check if you have done the following steps:-
check the dynamic text box available in alrtcatdef transaction, while creating the alert.
In the bpm, create a variable of simple type in a container
Included the container operation and the control step.
For the container operation - give the right simple type variable container
For the control step, specify the correct alert category (this should be the one for which the dynamic text is enabled)
The alert message that you specify here should have text which will be seen when the alert raised
*To capture the dynamic alert in the alert message, which is caught by the container step in the bpm....you will have to give the name of the simple type variable
between two ampersands(&).
"But these alert messages(which i am giving in BPM) is not coming in the alert mail in alert inbox but it gives the common message in long text(which i gave in long text while defining the alert category)......"
On checking the dynamic text option in the alert category defined, you will not have the option of giving a message in the long text. So, there is no way that the long text can be seen - 'cuz you are not defining it in the first place! Hence, either you have given the wrong alert category in the bpm or have not cheked the dynamic text option.
Regards,
Sushumna

Problem with the control step in a BPM

Hi All
My BPM is :
There is a block , the first step is a Receive, the second is a Send(synchronus) step after there is a switch step. Depending on the result of Send step the switch step goes to an other send step or it goes to a control step and throws Exception .
Checking the BPM a warning message occurs , it says "Exception APError will not be caugnt" as APError is the exception defined in the Block .
Running the BPM , the control step does not work
Does anyone has an idea what is the problem ?
Thanks
Antonis

Just defining the exception in the block step is not enough.
You also have to "catch" it in an exception branch.
That message usually occurs when the Block does not have any Exception Branch associated to that exception.
Make sure you have at least one exception branch in your block step and that it is associated to the APError exception.
Regards,
Henrique.

Control step for exception in BPM

Hi
i am tring to learn exception in BPM.
i inserted this Send step (Synchronous) in exception branch in block. and then inserted control step in exception branch.
i created Errorsend as abbreviation on exception in block.
and assigned this to system error under exceptions in send step. and then defined on Exception handler,
and now i could not define anything on exception in control step for action as Throw Exception, i am not looking at Throw alert.
i made receiver jdbc error and also mapping error in intentionally. when i see sxmb_moni, i can see jdbc error as normal process like not using exception branch.
i would like to complete exception branch and control step for finishing touches.
thanks
venjamin

hi,
send step is for synch and jdbc,,,
abaproxy to jdbc (sync)
i made receiver jdbc error intentionaly. can i send back exception log to sender system program or send email to someone?
when have you been using this function in bpm? if i am not right way.
thanks
venjamin

Trigger an exception in BPM ( Control Step )

Hi everyone,
I have a BPM which has a switch with three branch, one of them has a transformation to generate a mail structure and a sender to send the email, now I need throw an exception after send the email, I have think use a control step to do it, but I don't know how use the control step to throw an exception.
Could someone please help me?
Thanks, in advance.

Jose,
Please refer to the following url
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Also refer to the example scenarios in the Design: Integration Builder. For example
Software component SAP BASIS
Software component version SAP BASIS 6.40
Namespace http://sap.com/xi/XI/System/Patterns
Integration Scenarios and Integration Processes
Integration Processes BpmPatternReqRespTimeOut
Regards,
Mike

Add 2 container variables in control step BPM

Hi All,
I have a scenario where I need to add 2 container variables in control step under AlertMessage and I am using under exception branch
Control Step
StepName: XXXX
Action : XXXX
AlertCategory: XXXX
AlertMessage: ?
I am successful putting one container variable in alert message with &AAAA& but I want to add another variable values &BBBB& as well.
When I tried to keep variables as &AAAA& and &BBBB&..I can return code 99 in sxi_cache.
How can I achieve this with BPM..I am using sap pi 7.0

may be i need to explain more clearly..
I have 2 container variables with simple type which holds 2 different payload values.
Under exception branch I have a control step to throw alert. In this I need to pass alert messages with these 2 varaibles.
As I said earlier I am able to pass successfully one container variable value but when I insert the second variable it is not picking up and when I check sxi_cache the IP return was 99 which means some error occured while assiging these values.( I tried in different ways)
But when I inserted has &AAAA& and &BBBB& then reuton code was 0 but whn I run scenario it is not populating both values
Can anyone please help me how I can populate 2 variable values in alert message under control step.

Use a control step in BPM

hi all
Is it necessary to use a control step in BPM while using exception handling.
If yes then is it to be used in the exception branch?

>>is it necessary to use a control step in BPM while using exception handling.
No..
You can use control step only if you want to
·        Terminate the current process
·        Trigger an exception
·        Trigger an alert for Alert Management
http://help.sap.com/saphelp_nw04/helpdata/en/bb/e1283f2bbad036e10000000a114084/content.htm

Regarding Control Step

HI friends,
Can we send some user friendly messages using control step (throw alert ) mechanism.
E.g I have to process 1000 records then in the sending step of BPM if i have to insert some text message to Moni then can i use control step so that after every message is sent i get some message at the moni .
Is there any other better way to do it.
Regards

If you have mapping in your scenario, it'd be simpler if you just inputed some trace into AbstractTrace object (using .addInfo(String message) method).
Regards,
Henrique.

BPM Exception Handling control step

Hi,
Does anybody have any idea, whats the variable we need to pass in the control step of exception handling in BPM? and how to map the error message back to the RFC Response.
I had Transformation step, in that mapping is also there.
Is there any ideas??.
Thanks,
Raj.

Hi,
The requirement was to send the exception that occured to a target (say file).
insert a block for the exception
You cannot place an exception step without a block right... thats what i mean by the above statement.
Now, just after the exception has taken place, if i put a transformation step, and a send step, you will be taking care of sending the exception message to the target.
how to build the exception message ? It should map from what?
You could build a data type for the exception.
In the mapping, you could map it to constants. For ex:
if you build your DT as
<excep>
<code/>
<desc/>
</excep>
You could map the description to a constant string "timeout".
After this, the send step will send the message to the file, through the abstract interface that you create.
Regards,
Smitha.

Configuration of controlling steps

Similar Messages

Maybe you are looking for