Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

: Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
The FP-1000/1001 seri
al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
Regards,
Aaron

Similar Messages

I have bought photoshop elemnts 12 and have a CD, but there where no serialnumber in the box or on the folder. What shall I do to activate. Have tried to search a support number in Sweden but i can´t find any.

I have bought photoshop elemnts 12 and have a CD, but there where no serialnumber in the box or on the folder. What shall I do to activate. Have tried to search a support number in Sweden but i can´t find any.

Find your serial number quickly
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

When I attempt to open firefox an error message appears telling me that firefox is already running, but I can't find it running. How do I do so or in any case close the already running Firefox process?

When I attempt to open Firefox instead of Firefox opening, an error message appears saying "Firefox is already running but isn't responding. To open another window please close the existing Firefox process or restart the system.", but I can't find that process of Firefox in order to kill it, and after restarting the system there is still the problem. I have found an emergency fix to at least get online, and that is to use"Firefox_Profile_Manager" in the start menu's "run" start menu, but the
Firefox that then opens is that one doesn't carry over what I had in my bookmarks but starts bookmarks anew.

Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
**Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: ***See: http://kb.mozillazine.org/Safe_Mode
***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
****Test to see if the problem you are experiencing is corrected.
*** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
***#by enabling '''one at a time''' until the problem reappears.
***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
***#'''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit).
***#You can use "Disable all add-ons" on the Safe Mode start window.
**See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
 
 
'''You need to update the following:'''
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*Shockwave Flash 10.2 r153
*Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How can I send gifts without credit card? My Apple ID credit is 20 euro, but I can't choose my credit just visa, master card or Amex? This is terrible, because the credit was for gifts.

I hope anyone has an answer.

This helped had to reset the phone after this change and now works! Thanks! :-)

I installed the program from Creative Cloud but I can't find it in my computer...what should I do?

I installed the program from Creative Cloud but I can't find it in my computer...what should I do?

I have the same problem
OS windows 7 32bit

When I use the search box I would like results to show up in a "NEW" tab but I can't find this setting anywhere... Any solution???

When I use the search box I would like results to show up in a "NEW" tab but I can't find this setting anywhere... Any solution???

'''browser.search.openintab''' userset boolean True
Also in Google search, upper-right-corner settings
You can always force opening a link into a tab with Ctrl+click or Ctrl+Shift+click
If you want the same from a bookmark make sure to set
: '''browser.tabs.loadBookmarksInBackground''' to same value as you have for
: '''browser.tabs.loadInBackground'''
The last setting is controlled by Tools > Options > Tabs >
:: When I click on a link, switch to it immediately,
which control the difference between Ctrl+click and Ctrl+Shift+click
Items in boldface''' can be set in about:config
* '''More information on configuration variables''' available in [http://kb.mozillazine.org/About:config_entries about:config entries] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config] (How to change).
Reading:
* http://dmcritchie.mvps.org/firefox/keyboard.htm
* http://dmcritchie.mvps.org/firefox/tabs_config.htm

Please help me to find my iPad and iPhone 5C. I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends".

Dear Apple,
Please help me to find my iPad Air 2 64 GB and iPhone 5C 8GB. They're in IOS 8.0 maybe...I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends". They're very important to me. Many important files for my job in here and it has sentimental value to me. My boyfriend gave it for me so i don't want to lose them. And because i just lost my iPad Air last 3 month, and now i just bought iPad Air 2 two months ago. I'm so sad and lost. I want to catch the thief to the police so bad because they keep my bag and many other important things. I can not do anything without them. Please help me and contact me via my email or my phone. Thank you very much. Hope to receive your answer soon.

Hey there thaovy309,
Welcome to Apple Support Communities.
The linked article below provides a lot of great information and suggestions that should address your concerns about your data and finding your lost or stolen iPhone 5c and iPad Air 2.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
Take care,
-Jason

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

How do I set the default page when I select "+" for a new tab? Right now it defaults to Yahoo search and I want to set it to my Speed Dial page. I did have the default page set to Speed Dial but I can't find anywhere how I did it in the past.

You can set the homepage for opening tabs, but I can't find the setting for designating what page opens when I hit the + button on tabs.
This is the page that loads:
http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20100937,6693,0,16,0
How did Yahoo embed this in the Tab settings?

Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

HT4628 How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

ARD only works with Windows computers if the Windows computer is running VNC server software. Even then it can only control and observe. Do you have this installed?

I am trying to set up using my printer wirelessly through airport. I have a macbook and my husband can print wirelessly from his Macbook Pro but I can't. What do I have to do to set mine up? The printer is an Epson R2400

I am trying to set up using my printer wirelessly through airport. I have a macbook and my husband can print wirelessly from his Macbook Pro but I can't. What do I have to do to set mine up? The printer is an Epson R2400

Is there a cd that came with the printer?
If so, put in the cd and that will help you set it up.
If not, I think macs come with a program that helps you set up printers.
Also make sure that the printer is connected to the same network.
Make sure the printer is on.

I just recently updated my iPhone 4 to iOS 5 but I can't seem to configure it so that the Quick Access for the camera on the lock screen. anyone?

I just recently updated my iPhone 4 to iOS 5 but I can't seem to configure it so that the Quick Access for the camera on the lock screen. anyone? also, I don't see the facetime icon.

Thanks buddy. never thought it was that easy. my facetime still indicates validating account even the wifi signal is ok, as I was able to download apps. I checked my email and nothing came in yet for verification or validation. I will try it later again.
thanks again.

I see the message below but I can not find the other aplication : The Lightroom catalog named "lightroom Catolog" cannot be opened becouse another aplication has it opened.

I see the message below but I can not find the other aplication : The Lightroom catalog named "lightroom Catolog" cannot be opened becouse another aplication has it opened.

Have a look at this thread.
Trouble opening Lightroom 5

I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network

I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.

You will need to start over on the setup of the Time Capsule as follows:
Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule. The Ethernet cable must remain connected at all times.
Click the WiFi icon at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule
The example below shows an AirPort Express. You will see Time Capsule on your screen.
That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
Network Name..........Type in the exact name that the Netgear wireless is using
Base Station.............Type in a name that you want to call the Time Capsule. Use something short and simple. Mine is TC, for example
Password..................Type in the exact password that the Netgear wireless requires
Verify.........................Verify the Password again
Click Next
The setup wizard will configure everything for you automatically. When you see the message of Setup Complete, click Done.
That's it. Now you have one big "extended" network. Technically, this is called a "roaming" network.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

Similar Messages

Maybe you are looking for