Configuration of FRS 11.1.2
Hi ALL
i am installing hyperion 11.1.2 . I have install foundation ,essbase and FRS. i have configure essbase and everything is working fine . i am able to login to studio, EAS , shared services . Now i have configure FRS . i am not able to connect to workspace . even for studio it is giving me error you don't have previllage .
Do i have to configure foundation part again or is there anything i am missing . Can anybody help me with this
thanks
at studio it is asking for server URL
http(s)://server:port
i tried putting localhost and server name with port number as 8200. still it is giving me error
what do i have to put there ?
can you help me with this
thank you
Similar Messages
-
MSFT Windows clustering for SAN visibility by BO FRS?
Hi all,
This is specially for gurus who have worked on configuring clustered BO environment where FRS directories reside in a common SAN space. Do you have to have the Windows servers clustered (MSFT Windows clustering) so that the BO nodes residing on these Windows server have no problems accessing/writing/reading to a common SAN space? Does configuring clustered FRS on a SAN need the Windows servers upon which they reside be network clustered as well? A SAP tech support suggested this but I have not come across any such reference hence the question. Any insights greatly appreciated.
Thanks in Advance.hi, but one thing to note about SAN storage is without MSFT, at only one time, i believe only 1 server is allowed to access to the SAN storage. Unless the 1st server is rebooted / disconnected from the network, then only can the 2nd server access to the same LUN. Do correct me if my understanding is wrong.
-
Dear All
I use windows server 2008 in branch have active directory join to Primary domain in data-center domain.co.cc
i need to edit group on the this server but show error
Please help to advise
Run command dcdiag /fix
[QUOTE]Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>dcdiag /fix
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = aaa-CM-DC
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: CHIANGMAI\aaa-CM-DC
Starting test: Connectivity
......................... aaa-CM-DC passed test Connectivity
Doing primary tests
Testing server: CHIANGMAI\aaa-CM-DC
Starting test: Advertising
......................... aaa-CM-DC passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... aaa-CM-DC failed test FrsEvent
Starting test: DFSREvent
......................... aaa-CM-DC passed test DFSREvent
Starting test: SysVolCheck
......................... aaa-CM-DC passed test SysVolCheck
Starting test: KccEvent
......................... aaa-CM-DC passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... aaa-CM-DC passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... aaa-CM-DC passed test MachineAccount
Starting test: NCSecDesc
......................... aaa-CM-DC passed test NCSecDesc
Starting test: NetLogons
......................... aaa-CM-DC passed test NetLogons
Starting test: ObjectsReplicated
......................... aaa-CM-DC passed test ObjectsReplicated
Starting test: Replications
......................... aaa-CM-DC passed test Replications
Starting test: RidManager
......................... aaa-CM-DC passed test RidManager
Starting test: Services
......................... aaa-CM-DC passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:05:09
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:10:10
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
A warning event occurred. EventID: 0x00000427
Time Generated: 11/19/2014 11:14:30
Event String:
There are no IP addresses available for lease in the scope or supers
cope "DHCP-CM".
A warning event occurred. EventID: 0x000003FC
Time Generated: 11/19/2014 11:14:48
Event String:
Scope, 192.168.10.0, is 100 percent full with only 0 IP addresses re
maining.
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:15:10
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:20:11
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:25:11
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:30:12
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0xC00A0038
Time Generated: 11/19/2014 11:32:53
Event String:
The Terminal Server security layer detected an error in the protocol
stream and has disconnected the client. Client IP: 192.168.0.212.
A warning event occurred. EventID: 0x000003FC
Time Generated: 11/19/2014 11:34:49
Event String:
Scope, 192.168.10.0, is 100 percent full with only 0 IP addresses re
maining.
A warning event occurred. EventID: 0x000003FC
Time Generated: 11/19/2014 11:34:49
Event String:
Scope, 192.168.10.0, is 100 percent full with only 0 IP addresses re
maining.
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:35:13
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:40:13
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:45:14
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:45:19
Event String:
Driver RICOH Aficio MP C4502 PCL 5c required for printer RICOH Afici
o MP C4502 PCL 5c is unknown. Contact the administrator to install the driver be
fore you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:45:22
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Se
nd To OneNote 2010 is unknown. Contact the administrator to install the driver b
efore you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:45:23
Event String:
Driver Microsoft XPS Document Writer v4 required for printer Microso
ft XPS Document Writer is unknown. Contact the administrator to install the driv
er before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:45:23
Event String:
Driver SnagIt 8 Printer required for printer SnagIt 8 is unknown. Co
ntact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:45:24
Event String:
Driver WebEx Document Loader required for printer WebEx Document Loa
der is unknown. Contact the administrator to install the driver before you log i
n again.
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:50:17
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:55:17
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:58:36
Event String:
Driver RICOH Aficio MP C4502 PCL 5c required for printer RICOH Afici
o MP C4502 PCL 5c is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:58:39
Event String:
Driver Microsoft XPS Document Writer v4 required for printer Microso
ft XPS Document Writer is unknown. Contact the administrator to install the driv
er before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:58:40
Event String:
Driver WebEx Document Loader required for printer WebEx Document Loa
der is unknown. Contact the administrator to install the driver before you log i
n again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:58:41
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Se
nd To OneNote 2010 is unknown. Contact the administrator to install the driver b
efore you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:58:42
Event String:
Driver SnagIt 8 Printer required for printer SnagIt 8 is unknown. Co
ntact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 12:00:18
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
......................... aaa-CM-DC failed test SystemLog
Starting test: VerifyReferences
......................... aaa-CM-DC passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : aaa
Starting test: CheckSDRefDom
......................... aaa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... aaa passed test CrossRefValidation
Running enterprise tests on : domain.co.cc
Starting test: LocatorCheck
......................... domain.co.cc passed test LocatorCheck
Starting test: Intersite
......................... domain.co.cc passed test IntersiteI do follow with step below as link http://support.microsoft.com/kb/290762, It's work fine
Note You can configure the FRS logs to record detailed debugging entries. For more information about how to configure FRS logging, click the following article number to view the article in the Microsoft Knowledge Base:
221111 Description of FRS entries in the registry
To perform a nonauthoritative restore, stop the FRS service, configure the
BurFlags
registry key, and then restart the FRS service. To do so:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
Locate the following subkey in the registry:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Backup/Restore\Process at Startup
In the right pane, double-click BurFlags.
In the Edit DWORD Value dialog box, type D2 and then click
OK.
Quit Registry Editor, and then switch to the Command box.
In the Command box, type net start ntfrs.
Quit the Command box.
When the FRS service restarts, the following actions occur:
The value for BurFlags registry key returns to 0.
Files in the reinitialized FRS folders are moved to a <var>Pre-existing</var> folder.
An event 13565 is logged to signal that a nonauthoritative restore is started.
The FRS database is rebuilt.
The member performs an initial join of the replica set from an upstream partner or from the computer that is specified in the Replica Set Parent registry key if a parent has been specified for SYSVOL replica sets.
The reinitialized computer runs a full replication of the affected replica sets when the relevant replication schedule begins.
When the process is complete, an event 13516 is logged to signal that FRS is operational. If the event is not logged, there is a problem with the FRS configuration. -
Webex event center+encuestas o votacion
Estoy en busca de una solucion de conferencia o eventos que incluya votacion o encuestas.
al mismo tiempo necesitamos que tenga licencias perpetuas ya que sera una solucion para una camara de senadores.
la unica informacion que pude sacar es que este requerimiento cumple el WEBEX EVENT CENTER pero no encuentro su licenciamiento para realizar el proyecto.
Carlos Pinto
HIGH TECH CENTERI do follow with step below as link http://support.microsoft.com/kb/290762, It's work fine
Note You can configure the FRS logs to record detailed debugging entries. For more information about how to configure FRS logging, click the following article number to view the article in the Microsoft Knowledge Base:
221111 Description of FRS entries in the registry
To perform a nonauthoritative restore, stop the FRS service, configure the
BurFlags
registry key, and then restart the FRS service. To do so:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
Locate the following subkey in the registry:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Backup/Restore\Process at Startup
In the right pane, double-click BurFlags.
In the Edit DWORD Value dialog box, type D2 and then click
OK.
Quit Registry Editor, and then switch to the Command box.
In the Command box, type net start ntfrs.
Quit the Command box.
When the FRS service restarts, the following actions occur:
The value for BurFlags registry key returns to 0.
Files in the reinitialized FRS folders are moved to a <var>Pre-existing</var> folder.
An event 13565 is logged to signal that a nonauthoritative restore is started.
The FRS database is rebuilt.
The member performs an initial join of the replica set from an upstream partner or from the computer that is specified in the Replica Set Parent registry key if a parent has been specified for SYSVOL replica sets.
The reinitialized computer runs a full replication of the affected replica sets when the relevant replication schedule begins.
When the process is complete, an event 13516 is logged to signal that FRS is operational. If the event is not logged, there is a problem with the FRS configuration. -
Error in Configuring the File Repository Server (FRS)
Hi All.
We are using sap bo 3.1 sp7
Huge space is occupied by File store folder .
So we are planning to move to share drive entire folder
as per few documents in Scn.sap .I followed the steps and made changes in cmc---core services--input and output file repository for successfully..
Note : I Restart each of the modified servers and Enable the servers and i restarted SIA
but still iam facing
Consider it as a high priory issue
Thanks,
RaghunathHi Raghu Go through below link it maybe helpful. http://wiki.scn.sap.com/wiki/display/BOBJ/File+Repository+Server http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=322437724 http://blogs.hexaware.com/business-objects-boogle/business-objects-file-repository-servers/
-
Can Crystal Enterprise be configured so that it does not create files in the FileStore - Output
Post Author: christof
CA Forum: Administration
We are using the API to create pdf files using Crystal Enterprise but the problem is that now files are create in duplicate.We have one file which is stored in the filestore/output and another file which is stored as requested true the API. Is their a setting, configuration which could make it possible that no files are added in the filestore/output when the API is used. (when a onther filenam/path is given true the API) For now we should use a bat that removes those files every month.Post Author: TAZ
CA Forum: Administration
Hi Christof,
If instances are being generated in the output FRS that would indicate reports with saved data as opposed to the input FRS which contains the report without saved data. I think this is needed for the conversion to PDF but you can post this question in the DEV forum and posibly find out for sure.
Regards,
Tim -
Can't Start FRS services.
Hi,
I can't seem to start my input, or output FRS. If I try to start the services, they stop immediatly. The following error is logged in event viewer:
The root server reported an error Configuration Problem. (Reason: Cannot find the root directory '' to start the File Repository Server.).
Any support would be greatly appreciated.
Sang.Alright here you go...give this a shot!
AGAIN...I have never used CE8 so I am not sure if CE8 had a CCM interface like BO XI does, but if it does, then this might work....
1. Open the CCM.
2. Stop the appropriate FRS and click the Properties button.
3. Type u201Cu2013RootDir <RootDirFolder>u201D at the end of the Command text box:
u201C\C$\Program Files\Business Objects\BusinessObjects Enterprise 11.5\win32_x86\outputfileserver.exeu201D -service -name <FileServerInstance> -ns <CMSClusterName> -restart -RootDir u201CD:\BO FRS\Outputu201D
4. Restart the FRS.
Edited by: Sarang Deshpande on Oct 13, 2008 2:27 PM -
Generating and updating URS, FRS and test
Hi folks,
I am trying to find some material in this regard i wanna know what is generating and updating URS, FRS and test script documents
Pls anyhow help me its very urgent
Thanks in advance and waiting for u r answer
prasadHi,
More information about the issue....
We are creating the test scripts both manual and automated.
Manual
Using the Tx. STWB_TC, we are creating the manual test cases. While doing so we will provide the test case desctiption
Automated ECATT
using the Tx. SECATT, we are creating the Test Configuration. We are providing description through the documentation option.
The SAP format for both documents is
&DESCRIPTION&
&PREPARATION&
&ENTRANCE&
&REALIZE&
&CHECK&
&FURTHER_HINTS&
But we want the format to be
<DESIGNSTEPS>
<INPUTDATA>
<EXPECTEDRESULT>
<TARGETSYSTEM>
So we want to update the format / template to reflect the changes.
Please guide us to do so.
Thanks and Regards
Saman -
Clustering and FRS folder shared
Post Author: gcr
CA Forum: Administration
Hi,
I need to create a complete cluster with BOXI Release 2 Service pack 2 on Solaris 10 .
The install on 2 machines work and the cluster (with clustername, database connection) is available.
I need also BOXI share folder for frs (file repository server ?) but how configure this ?
I need share all the data subfolder of Businessobjects or only the input/output frs service ?
thank you for your help.
gillesPost Author: gcr
CA Forum: Administration
Hi,
I need to create a complete cluster with BOXI Release 2 Service pack 2 on Solaris 10 .
The install on 2 machines work and the cluster (with clustername, database connection) is available.
I need also BOXI share folder for frs (file repository server ?) but how configure this ?
I need share all the data subfolder of Businessobjects or only the input/output frs service ?
thank you for your help.
gilles -
SOLVED: Question about configuration guide
I found configuration guide in:
http://www.oracle.com/technology/products/forms/pdf/B10170_01.pdf
Is there a more recent/up to date version?
Thanks,
USA
Message was edited by:
USAIs there a more recent/up to date version?Sure, http://download.oracle.com/docs/cd/B19375_07/doc/frs/forms/B14032_03/toc.htm
-
FRS errors 13552 & 13555. SYSVOL not replicating.
Hi All, looking for a little help here...
Here is the scenario. My (new) client has ONLY 1 domain controller (Windows Server 2003 which I will call SERVER1). I recently installed a new 2008 R2 server and made it a replica domain controller. Everything went well until I realised that
there was no SYSVOL share on the new server. I checked FRS event logs on SERVER1 and noticed that event ID errors 13552 & 13555 have been occuring since December 2010.
I've been reading about changing burflags to do a nonauthorative restore from a replica DC however in this case there is only 1 DC. Can someone advise how I go about fixing this?
Event Type: Error
Event Source: NtFrs
Event Category: None
Event ID: 13552
Date: 21/06/2011
Time: 2:15:57 PM
User: N/A
Computer: SERVER1
Description:
The File Replication Service is unable to add this computer to the following replica set:
"DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is "server1.mydomain.local"
Replica set member name is "SERVER1"
Replica set root path is "c:\windows\sysvol\domain"
Replica staging directory path is "c:\windows\sysvol\staging\domain"
Replica working directory path is "c:\windows\ntfrs\jet"
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Event Type: Error
Event Source: NtFrs
Event Category: None
Event ID: 13555
Date: 21/06/2011
Time: 2:15:57 PM
User: N/A
Computer: SERVER1
Description:
The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:Hi CURNS, thanks for the replies. Yes, it works in below scenario (Replication from 2003 to 2008).
There was only 1 copy of sysvol, and it was on the old DC. The new DC has not yet shared or replicated sysvol thus making the burflag D2 option a no go. I first had to fix whatever the issue was with the old DC before the new one would replicate.
I fixed replication issue with 4 easy steps:
1. stopped the FRS service on both DCs (old and new)
2. set burflag on old DC to D4 (to tell it its the boss)
To configure the SYSVOL replica set to be authoritative, follow these steps:
Click Start, click Run, type regedit, and then click OK.
Locate and then click the BurFlags entry under the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NtFrs\Parameters\Cumulative
Replica Sets\GUID
GUID is the GUID of the domain system volume replica set that is shown in the following
registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NtFrs\Parameters\Replica
Sets\GUID
Right-click BurFlags, and then click Modify.
Type D4 in the Value Data field (HexaDecimal), and then click OK.
3. restarted FRS service on old DC.
4. restarted FRS service on new DC.
After this I could see event logs saying FRS was now working and I confirmed sysvol and netlogon shares now existed on the new DC using net share command.
Thanks. -
Migration FRS - DFSR (Sysvol) 2 questions.
Good day to all.
I apologize in advance for my bad english.
I have learned this SYSVOL Replication Migration Guide: FRS to DFS Replication and blog SYSVOL
Migration Series. Then I successfully completed the migration FRS->DFSR, but I still have 2 questions:
1. There is a step "force AD replication" (repadmin /syncall /A /e /d), for example in article about migration to the "prepared" global state. But why this step is at the "Monitoring" stage? I mean there is point to force replication
immediately after setting the global state to accelerate the reception of migration directive by domain controllers. But why force replication when the migration to the specified state is done? The same question about dfsrdiag /pollAD.
2. There is information, that SYSVOL_DFSR will contain only "domain" and "sysvol" folders and it is true. Should I manually create "staging" and "staging areas" with junction point inside or not? I do not really know
what these folders are needed for.
Thanks.Hi there, I recently upgraded our domain and forest functional levels and also performed an FRS to DFSR upgrade.
Like you, I used the SYSVOL Migration Series blog posts for guidance.
1. The force steps are optional. I'm not sure when you might want to do this, perhaps your network is configured with longer replication intervals and you want to force it to start rather than wait until it replicates on its own.
2. You shouldn't need to create any extra folders from my understanding.
These are the steps I took when performing this on our environment
1. Use Active Directory Domains and Trusts to raise domain level
2. Use Active Directory Domains and Trusts to raise forest level
3. Run the following commands on your "primary" DC (the one with FSMO roles and PDC emulator)
dfsrmig /SetGlobalState 1
dfsrmig /GetGlobalState
dfsrmig /GetMigrationState
dfsrmig /SetGlobalState 2
dfsrmig /GetGlobalState
dfsrmig /GetMigrationState
dfsrmig /SetGlobalState 3
dfsrmig /GetGlobalState
dfsrmig /GetMigrationState
As you already know, SetGlobalState will instruct AD to move to the next state, GetGlobalState is there so you can confirm it's at the correct state. Finally, run GetMigrationState a few times as it'll show you the progress as the DCs in your domain migrate
through different states. We have various DCs around Australia and it took no more than 10 minutes for them to migrate from one step to the next without the need to force replication.
Our environment isn't very heavily modified with regards to replication. -
Hello There,
We have a following FRS registry entry on Win 2003 DCs
HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\Internet
Ports: REG_MULTI_SZ: 5101-5200
PortsInternetAvailable: REG_SZ: Y
UseInternetPorts: REG_SZ: Y
We are migrating from Win 2003 to Win 2012 R2 and have configured the above registry and the following, on win 2012 R2 DCs.
DFSRDIAG STATICRPC /port:5100
Will the FRS and DFS-R conflict for port?.Hi,
From the description they will not conflict for ports.
However if there is no Windows 2003 systems in your environment now, FRS is not needed anymore. By default from Windows 2008 R2, AD will also be replicated via DFSR instead of FRS.
In Windows Server 2012 R2, Windows Server 2012, and Windows Server 2008 R2, FRS can be used only to replicate the SYSVOL folder on domain controllers in domains that use the Windows Server 2003 or Windows 2000 domain functional levels.
See: FRS Overview
http://msdn.microsoft.com/en-us/library/cc754297.aspx
If you have any feedback on our support, please send to [email protected] -
Airport can no longer read or write the configuration of Time Capsule
I have a MacBook Pro running OSX 10.8.3 and maintained with all available patches. I have also a Time Capsule with version 7.6.3 of the firmware. I use AirPort 6.2. So everything seems to be updated with the latest versions.
This has really been a good setup for nearly a year now, but earlier this month Time Machine suddenly stopped to work and could no longer do backups to the Time Capsule. I have tried to factory reset the Time Capsule several times, but I still get problems when writing the configuration to the Time Capsule. I get an error message saying "An error occurred while updating the configuration".
Airport is furthermore not able to detect the Time Capsule correctly anymore, so I have to configure it by entering the IP address. But after setting up WLAN, disks, etc. and enhanching the security, I just receive the error message when I try to write the config. The Internet connection works perfectly anyway, both via cable and wireless.
Anyone got any tips?Do the setup by ethernet in full isolation from the network.
Start from a full factory reset.
I would recommend you take the firmware back to 7.6.1 or even earlier if the TC is older than 12months. 7.5.2 was very reliable. All these bugs started with 7.6 and the change to Lion.
I would also recommend installing 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
Error while Provisioning a user to Exchange:Configuration OIM 9.1 & JBOSS
Hi,
I am facing the below error while provisioning a user to Exchange. The Resource gets provisioned. But inside the resource, two tasks (Create User & Set Mailbox) are rejected. When i retry these tasks, the Resource status is set to Revoked in the Resource Profile of OIM. The AD Provisioning is working fine. There are 2 AD IT Resources here. Database is Oracle 10g.
Error:
2012-03-02 15:06:10,347 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[xlWebApp]] action: LogonAction: User 'RWFLORENCIO' logged on in session 8B825B2D391A654D975CDC91FECB5E8E
2012-03-02 15:06:34,712 INFO [STDOUT] Running GETFULLNAME
2012-03-02 15:06:34,712 INFO [STDOUT] Target Class = gitidm.LogProfileUser
2012-03-02 15:06:34,721 INFO [STDOUT] Running GETMANAGER
2012-03-02 15:06:34,721 INFO [STDOUT] Target Class = gitidm.LogProfileUser
2012-03-02 15:07:00,233 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavri15-1iti
2012-03-02 15:07:00,233 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:07:00,233 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:07:55,208 INFO [STDOUT] Running IDMVALIDATION
2012-03-02 15:07:55,208 INFO [STDOUT] Target Class = gitidm.CustomApproval
2012-03-02 15:07:55,267 INFO [STDOUT] select USR_MANAGER_KEY from USR where USR_UDF_EMP_NO='540087'
2012-03-02 15:07:55,267 INFO [STDOUT] result : OK
2012-03-02 15:07:55,559 INFO [STDOUT] Running GETKEY
2012-03-02 15:07:55,559 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:07:55,559 INFO [STDOUT] Running GETIH1
2012-03-02 15:07:55,559 INFO [STDOUT] Target Class = gitidm.CustomApproval
2012-03-02 15:07:55,614 INFO [STDOUT] select USR_MANAGER_KEY from USR where USR_UDF_EMP_NO='540087'
2012-03-02 15:08:00,207 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavssb3-1itk
2012-03-02 15:08:00,207 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:08:00,207 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:08:16,901 INFO [STDOUT] Masuk exception
2012-03-02 15:08:16,988 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,000 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,016 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,030 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,046 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,304 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[xlWebApp]] action: LogonAction: User 'XELSYSADM' logged on in session 8B825B2D391A654D975CDC91FECB5E8E
2012-03-02 15:09:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavu2lc-1itr
2012-03-02 15:09:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:09:00,193 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:09:16,525 INFO [STDOUT] Running TOLOWERCASE
2012-03-02 15:09:16,526 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:09:16,642 INFO [STDOUT] Running TOLOWERCASE
2012-03-02 15:09:16,643 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:09:17,139 INFO [STDOUT] Running CHECKCHILDOBJECT
2012-03-02 15:09:17,139 INFO [STDOUT] Target Class = gitidm.CheckEmptyChild
2012-03-02 15:09:17,217 INFO [STDOUT] Connected to IAM
2012-03-02 15:09:17,218 INFO [STDOUT] Query : select * from UD_EMAILOF join obi on obi.obi_key=UD_EMAILOF.obi_key join UD_MAILFOC on UD_MAILFOC.UD_EMAILOF_KEY=UD_EMAILOF.UD_EMAILOF_KEY where obi.req_key='44002'
2012-03-02 15:09:17,228 INFO [STDOUT] Total record : 1
2012-03-02 15:09:17,228 INFO [STDOUT] Is Admin not filled the child form ? FILLED
2012-03-02 15:09:17,231 INFO [STDOUT] Disconnected from IAM
2012-03-02 15:09:17,606 INFO [STDOUT] Running SETPROXYADDRESS
2012-03-02 15:09:17,607 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:17,622 INFO [STDOUT] SetProxyAddressForSubsidiary
2012-03-02 15:09:17,622 INFO [STDOUT] Running INSERTTOLOG
2012-03-02 15:09:17,623 INFO [STDOUT] Target Class = gitidm.LogProvisioning
2012-03-02 15:09:17,701 INFO [STDOUT] Query Log= insert into IDM_PROV_LOG values (sysdate,'Request for Email Account','RWFLORENCIO','rwflorencio','Set Proxy Address','FAILED','NO')
2012-03-02 15:09:18,870 INFO [STDOUT] Running CHANGEDOMAINUSER
2012-03-02 15:09:18,870 INFO [STDOUT] Target Class = adir.Provisioning
2012-03-02 15:09:18,945 INFO [STDOUT] Running GETDNUSERPLDT
2012-03-02 15:09:18,945 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:18,961 INFO [STDOUT] GetDN
2012-03-02 15:09:18,991 INFO [STDOUT] GETDN():CN=FLORENCIO\, Raul W.,OU=PLDT Non-Executives,OU=Test Area,DC=ISSecLAB,DC=NET
2012-03-02 15:09:18,991 INFO [STDOUT] Running ENABLEMAILBOXPLDT
2012-03-02 15:09:18,991 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:19,019 INFO [STDOUT] EnableMailbox
2012-03-02 15:09:19,020 INFO [STDOUT] user ssh ->Administrator
2012-03-02 15:09:50,426 INFO [STDOUT] error ->Could not connect for 30000 milliseconds
2012-03-02 15:09:51,428 INFO [STDOUT] Disconnected: 192.168.1.72. Press Enter to exit
2012-03-02 15:09:51,428 INFO [STDOUT] Running INSERTTOLOG
2012-03-02 15:09:51,428 INFO [STDOUT] Target Class = gitidm.LogProvisioning
2012-03-02 15:09:51,502 INFO [STDOUT] Query Log= insert into IDM_PROV_LOG values (sysdate,'Request for Email Account','RWFLORENCIO','rwflorencio','Enable Mailbox','FAILED','Could not connect for 30000 milliseconds')
2012-03-02 15:09:53,940 INFO [STDOUT] Running SETMAILBOX
2012-03-02 15:09:53,940 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:53,959 INFO [STDOUT] userssh ->Administrator
2012-03-02 15:09:53,959 INFO [STDOUT] userid ->ISSECLAB\Administrator
2012-03-02 15:10:00,461 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavvd3h-1itu
2012-03-02 15:10:00,462 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:10:00,462 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:10:00,577 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavvd6p-1itv
2012-03-02 15:10:00,577 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:10:00,578 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:10:00,865 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:10:00,865 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:10:07,034 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:10:25,353 INFO [STDOUT] Could not connect for 30000 milliseconds
2012-03-02 15:10:26,357 INFO [STDOUT] Disconnected: 192.168.1.72. Press Enter to exit
2012-03-02 15:11:00,222 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavwn7i-1itx
2012-03-02 15:11:00,223 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:11:00,223 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:11:51,773 DEBUG [org.jboss.resource.connectionmanager.IdleRemover] run: IdleRemover notifying pools, interval: 450000
2012-03-02 15:12:00,219 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavxxi3-1itz
2012-03-02 15:12:00,220 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:12:00,220 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:13:00,229 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavz7t1-1iu2
2012-03-02 15:13:00,229 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:13:00,229 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:14:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw0i2o-1iu5
2012-03-02 15:14:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:14:00,193 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:14:02,974 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,974 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,473 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,473 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:00,249 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw1sex-1iu7
2012-03-02 15:15:00,249 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:15:00,249 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:15:00,591 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:15:00,592 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:15:00,727 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw1ss0-1iu9
2012-03-02 15:15:00,727 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:15:00,728 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:15:06,711 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:15:18,066 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,075 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,075 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,076 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,076 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,220 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw32os-1iub
2012-03-02 15:16:00,221 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:16:00,221 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:16:00,536 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,537 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,537 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,538 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,539 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:17:00,200 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw4cyw-1iud
2012-03-02 15:17:00,200 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:17:00,201 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:18:00,209 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw5n9t-1iuf
2012-03-02 15:18:00,210 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:18:00,210 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:19:00,211 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw6xkj-1iuh
2012-03-02 15:19:00,212 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:19:00,212 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:19:21,833 DEBUG [org.jboss.resource.connectionmanager.IdleRemover] run: IdleRemover notifying pools, interval: 450000
2012-03-02 15:20:00,500 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw8838-1iuk
2012-03-02 15:20:00,501 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:20:00,501 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:20:00,673 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw8881-1iul
2012-03-02 15:20:00,674 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:20:00,674 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:20:00,930 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:20:00,931 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:20:07,489 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:21:00,306 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw9i8g-1iun
2012-03-02 15:21:00,306 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:21:00,306 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:22:00,281 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzawasih-1iup
2012-03-02 15:22:00,282 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:22:00,282 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:23:00,303 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzawc2tl-1iur
2012-03-02 15:23:00,304 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:23:00,304 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:23:27,310 INFO [STDOUT] Running CHANGEDOMAINUSER
2012-03-02 15:23:27,312 INFO [STDOUT] Target Class = adir.Provisioning
2012-03-02 15:23:27,413 INFO [STDOUT] Running GETDNUSERPLDT
2012-03-02 15:23:27,414 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:23:27,432 INFO [STDOUT] GetDN
2012-03-02 15:23:27,473 INFO [STDOUT] GETDN():CN=FLORENCIO\, Raul W.,OU=PLDT Non-Executives,OU=Test Area,DC=ISSecLAB,DC=NET
2012-03-02 15:23:27,473 INFO [STDOUT] Running ENABLEMAILBOXPLDT
2012-03-02 15:23:27,474 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:23:27,495 INFO [STDOUT] EnableMailbox
2012-03-02 15:23:27,496 INFO [STDOUT] user ssh ->Administrator
2012-03-02 15:23:55,851 WARN [org.jboss.tm.TransactionImpl] Transaction TransactionImpl:XidImpl[FormatId=257, GlobalId=oim1.isseclab.net/5544083, BranchQual=, localId=5544083] timed out. status=STATUS_ACTIVE
2012-03-02 15:23:55,874 WARN [XELLERATE.DATABASE] Trying to get the connection count : 0
2012-03-02 15:23:55,875 WARN [XELLERATE.DATABASE] Trying to get the connection count : 1
2012-03-02 15:23:55,876 WARN [XELLERATE.DATABASE] Trying to get the connection count : 2
2012-03-02 15:23:55,877 WARN [XELLERATE.DATABASE] Trying to get the connection count : 3
2012-03-02 15:23:55,878 WARN [XELLERATE.DATABASE] Trying to get the connection count : 4
2012-03-02 15:23:55,878 ERROR [XELLERATE.DATABASE] Class/Method: DirectDB/getConnection encounter some problems: Error while retrieving database connection.Please check for the follwoing
Database srever is running.
Datasource configuration settings are correct.
2012-03-02 15:23:55,878 ERROR [XELLERATE.DATABASE] Class/Method: tcDataBase/readPartialStatement encounter some problems: Got a null connection
java.sql.SQLException: Got a null connection
at com.thortech.xl.dataaccess.tcDataBase.readPartialStatement(Unknown Source)
at com.thortech.xl.dataobj.tcDataBase.readPartialStatement(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.cache.CacheUtil.getSetCachedQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.insertImplementation(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.attestTask(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beansimpl.AttestationOperationsBean.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beans.AttestationOperationsSession.updateResponses(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1129.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy744.updateResponses(Unknown Source)
at Thor.API.Operations.AttestationOperationsClient.updateResponses(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1128.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy785.updateResponses(Unknown Source)
at com.thortech.xl.schedule.tasks.tcTskSubmitAttestationRequets.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2012-03-02 15:23:55,885 ERROR [XELLERATE.SERVER] Class/Method: tcDataObj/eventPreInsert encounter some problems: Data Access Error
com.thortech.xl.dataaccess.tcDataSetException: Data Access Error
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.cache.CacheUtil.getSetCachedQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.insertImplementation(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.attestTask(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beansimpl.AttestationOperationsBean.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beans.AttestationOperationsSession.updateResponses(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1129.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
Please help as its really urgent!Hey guys! 2 days and no replies yet. please help me with this.
Maybe you are looking for
-
Recently I have been working on docs without the distraction of having to see my desktop around my page file by using the full screen view in pages. I do find the contrast to an all black screen too harsh though and it makes my eyes more tired than s
-
How to factory reset IPAD-1?
i couldnt find the option to reset my ipad to factory settings. any help?
-
Happy Birthday Oran_gina
Strong hints that today is the day, so happy probably birthday Hope you have a fabulosa day
-
No entry in table T582A for 171
Hi Friendz, When I executed Idoc, system is throwing message No entry in table T582A for 171. I checked in T582A and T777D (attribute/characteristics ) tables infotype is available. Please advice to rectify this issue asap. Thanks in advance, $Lakshm
-
Archiving Transaction SARA throws dumps.
S0003731475 Hi Gurus I am trying to run archiving transaction SARA but it throws dumps and I canu2019t seem to find the reasonu2026u2026 Here is the dumpu2026u2026..Anyone who faced similar problemu2026u2026.Please help. Runtime errors SYNTAX