Configuration of GUI for SAP BW

hello all,
can any one tell me how to configure the SAPGUI 6.40, for SAP BW.I had installed SAP BW on WAS.It is asking for parameters like application server,system id,system no etc.
regards,
ravi

Hi Ravi,
        Go through these documents.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24396589-0a01-0010-3c8c-ab2e3acf6fe2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3fbe3546-0a01-0010-6aac-aa108441ad01
        Assign Points if these helps
Cheers,
Aravindhan

Similar Messages

  • Configuring universal worklist for SAP workflows

    Hi All,
             How to Configure Universal Worklist for SAP Workflows....could you please tell me the configuration steps in Portal and please tell me required Transaction codes to configure in SAP R/3 side for configuration of UWL....
    This is urgent.....
    Really i appreciate.
    Thanks and Regards,
    Abhi.

    Hi Abhiram,
    u cn refer to these links.......its of very use to u.......
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
    http://help.sap.com/saphelp_nw2004s/helpdata/en/57/c223be82104792a15c2df11377b9ed/frameset.htm
    How configure UWL in Portal 7.0
    configuring the Universal Worklist
    Problem configuring UWL
    Regards
    Bhargava
    points are welcome

  • SAP GUI for SAP BW 3.5 on linux RHEL 4 oracle 10.2.0.2 & kernel 6.40

    Hi all,
    Pls let me know wat version of SAP GUI can i use for "SAP BW 3.5 on linux RHEL 4 oracle 10.2.0.2 & kernel 6.40" and where can i find it in service market place.
    Thanks in advance.
    Praveen

    use my links:
    software is located at ftp://ftp.sap.com/pub/sapgui/win/640/compilation5
    patch is at ftp://ftp.sap.com/pub/sapgui/win/640/patches
    in summary you need to download and install these components in this order:
    1. ftp://ftp.sap.com/pub/sapgui/win/640/compilation5/50078731_4.zip
    2. ftp://ftp.sap.com/pub/sapgui/win/640/patches/gui640_26-10001615.exe
    3. ftp://ftp.sap.com/pub/sapgui/win/640/patches/bw350_12-10001615.exe
    so, you install SAPGUI, patch SAPGUI, patch BW add-on from SAPGUI.
    about your 23/24 patch question, you only need to install the latest, so, that would be patch 24 in your case... but you should install the latest one which in patch 26. use my links!

  • How to configure session timeout for SAP Netweaver Portal

    Hi,
    I would like to know the way to configure the session timeout for SAP Netweaver Portal.

    Hi Kim,
    the solution for your question  is in this thread.
    500 Connection timed out
    if it is helpful award me points.
    Regards,
    R.Suganya.

  • New to sap - need help in configure backup strategy for SAP XI server.

    hi gurus
    being a netweaver guy, recently i have been given  the responsibility of few basis activities.like database backup.
    can any one tell me clear procedure to take both daily online and weekend full offline backup of oracle in to disk first and then to tape.   i have seen in the internet  material few discussing about brbackup and few about sap DB13. i am totally confused which one to use, and which is good. please help
    akhil

    Hi,
    welcome on board as SAP Netweaver guy,
    don't be confused both DB13 and BRtools are the same both of them will call brbackup.
    to configure the brtools you have to change in your brtools profiles located at  %ORACLE_HOME%/dbs
    please before changing any thing take backup from that folder.
    - to take the backup to disk then to tape you will need extra backup software, because using the SAP slandered tools you have to select either Disk or Tape.
    Thanks
    Sherif

  • PPM 4.5 configuration on EHP4 FOR SAP ERP 6.O

    Hi,
    Could anyone guide me to configure the PPM in the back-end and as well as in the portal.
    I need to navigate PPM in the portal now.
    So, Please let me now the configuration guide or suggestions.
    Thanks in advance.
    Best Regards,
    Prabhu Reddy.

    Hi Prabhu,
    Check this link might be helpful
    http://help.sap.com/saphelp_ppm450sp04/helpdata/en/43/054880bbe822f5e10000000a1553f7/frameset.htm
    Regards,
    Santosh.

  • How to configure Engine/SDM for SAP J2EE  Server

    Hi Experts,
    I deployed the EAR file on J2EE Server.
    This EAR file is linked to WebModuleProject (xyz)whic has a WAR file.
    This WAR file contains one JSP. (test_jsp.jsp)
    Then on following the URL
    <a href="http://server:port/xyz/test_jsp.jsp">http://server:port/xyz/test_jsp.jsp</a>
    i m getting the following error message:
    Nov 29, 2007 11:01:40 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [001]Deployment aborted
    Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
    How do i configure engine/SDM?
    What is SDM engine?

    I configured the SDM/Engine successfully
    but still following the url
    <a href="http://server:port/xyz/test_jsp.jsp">http://server:port/xyz/test_jsp.jsp</a>
    i m getting the following error
    404   Not Found
      The requested resource /WebModuleProject/test_jsp.jsp is not available
      Details:   File [WebModuleProject/test_jsp.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
    Please experts help me to dig out this problem
    Can anybody suggest me why i m getting the error?

  • How to configure boe.properties file in ACTool for SAP BO Distributed environment

    Hi ,
    I am trying to configure the ACTool for SAP BO distributed environment (dedicated BOE Server, Tomcat and Explorer) servers. I have installed SMD Agent, Host Agent and ACTool without any issues in the BOE server(CMS), but I am unable to run the ACTool in Tomcat Server(Web Tier)  and Explorer servers.
    1. How can we configure the boe.properties file for Tomcat Server and Explorer ser to run ACTool?
    2. Is it required to install SMD_Agent and Host_Agent  in Tomcat Server and Explorer server (in my case i have already installed).
    3. What all parameters need to be set in boe.properties file so that ACTool will run correctly in Tomcat server and Explorer server correctly.
    Regards
    Pramod

    Hi ,
    I am trying to configure the ACTool for SAP BO distributed environment (dedicated BOE Server, Tomcat and Explorer) servers. I have installed SMD Agent, Host Agent and ACTool without any issues in the BOE server(CMS), but I am unable to run the ACTool in Tomcat Server(Web Tier)  and Explorer servers.
    1. How can we configure the boe.properties file for Tomcat Server and Explorer ser to run ACTool?
    2. Is it required to install SMD_Agent and Host_Agent  in Tomcat Server and Explorer server (in my case i have already installed).
    3. What all parameters need to be set in boe.properties file so that ACTool will run correctly in Tomcat server and Explorer server correctly.
    Regards
    Pramod

  • Need SAP GUI for Mac and process of how to install and configure

    Hi Experts,
         I need SAP GUI for Mac. Also please explain the process of how to install, how to configure etc? Please help me.

    You can download the SAP Presentation DVD that will have the SAPGUI Java version for OS X. After you install, just run the app from the Application Folder.
    For config there are a few options:
    1. To connect to a DI directly. After starting the app, click new and under the "Advanced" tab use the following string:
       conn=/H/(hostname)/S/(port / 3200 for instance ID 00)
    2. To connect to a login group. After starting the app, open the "Preferences" / Configuration / Messageservers, you need to set a path to a file that has the message servers in the following string
    (SID) :     /M/(hostname)/S/(message server port)
    Then click "New" and on the first tab you can choose a system and login group.
    Hope this helps.
    Thank
    matt

  • Connect to SAP R/3  using SAP GUI for HTML through saprouter

    Hello,
    I have my system running on my intranet, but I need to connect some support enginners through an Internet connection. Nowadays some users can connect to QAS and PRO systems using SAP GUI for windows and java with the saprouter string,  but the support enginners are using SAP GUI for HTML, do I need a special string or configuration so html users can connect to my system from the Internet?
    Thanks in advance.

    thanks, I can get the data from SAP R/3 to crystal report.
    but still dont know how to do the second question mentioned in previous message:
    once the table I want to get the data from is a cluster, and have found the mapping data dictionary of this data cluster, which displayed in crystal report connection as well, however, the data is not what I wanted.

  • Problem while printing from SAP GUI for HTML

    Hello,
    We are trying to print a delivery confirmation from the portal using SAP GUI for HTML. We have followed note 771683 to do this. However we are facing the following problems:
    1) The print action(PDF creation) is not triggered until the user performs some action
    2) the PDF that is created is corrupted(does not open)
    In order to correct this we tried to implement note 957292. However, the changes to the object FRONTEND_PRINTPOLL_FRONT_REQUEST.HTM mentioned in this note created problems. So we decided to do the changes to this object manually. But we see that the SAP note doesn't contain any information on changes that should be implemented for this object.
    Question:
    Is the note 957292 only way to solve the printing(PDF) problem? If not, how can we trigger the automatic creation of the PDF and remove the error from the PDF file?
    If yes, any idea what is causing the problem during the note implementation?
    We are on NW2004s - EP7.0 SP10
    ITS 7.0
    Thanks in advance.
    Regards,
    Reena

    Hi,
    configure printer in SPAD  , no setting for JAVA GUI
    check note
    605467:SAPscript/Smart Forms: Print preview in SAP GUI for Java
    634158      SAPscript/Smart Forms: Print preview in SAP GUI for Java (2)
    1024624 SAPscript/Smart Forms: Print preview in SAP GUI for Java (3)       
    regards,
    kaushal
    regards,
    kaushal

  • Sap gui for mac

    Hi everyone,
    I have been using sap gui on windows before and now I wanted to shift to mac. can anyone please let me know how I can use Sap gui on mac os. I have installed the gui for java on my mac os but I am unable to configure it. i would greatly appreciate if anyone could help me in this issue. thank you
    regards
    rahul

    Hi
    As you have alreay installed the SAPGui for Java on MAC OS
    Please do this, to do the connection with SAP:
    Click on New System to add. Go to tab "Advanced"
    Enter the following String:
    conn=/H/<<Router String detail>>/H/<<System IP to which to connect>>/S/32<<SYstem Number>>
    Else you can create the file to connect also.
    Please check this
    SAPGUI Java Configuration

  • SAP GUI for Windows

    I am trying to have SAP UWL Tasks open in the SAP GUI for Windows instead of the SAP GUI for HTML.  I have created new folders "Customization"->"Universal Worklist" and created delta linked copies of all the iViews found in "Portal Users"->"Standard Portal Users"->"Universal Worklist".
    Then I went to the System Administration->System Configuration->Universal Worklist & Workflow-> Universal Worklist-Administration->Optional Universal Worklist Service Configuration and changed the "Path to the UWL iViews to the pcd location of the new folder (portal_content/com.myl.custom/com.myl.uwl).
    Then I opened the UWL - Launch SAP Transaction iView (my delta linked copy) and changed the SAP GUI Type to "SAP GUI for Windows".
    I thought this was all I needed to do but when I open an SAP task from the UWL it opens the same as it did before - I see no difference at all.  Any help is appriciated and rewarded.
    Edited by: TA on Oct 1, 2008 6:03 PM
    I just noticed that the XML content for the configuration has the SAPIACLauncher as the handler instead of the SAPTransactionLauncher...
    So Now I have created a new configuration with each transaction is set similar to this:
    <ItemType name="uwl.task.webflow.TS20000194.RS4" connector="WebFlowConnector" defaultView="webflowView" defaultAction="launchSAPAction" executionMode="pessimistic">
          <ItemTypeCriteria systemId="RS4" externalType="TS20000194" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchSAPAction" userDecision="no" handler="SAPTransactionLauncher">
              <Properties>
              <Property name="GuiType" value="WinGUI"/>
              </Properties>
              <Descriptions default=""/>
            </Action>
          </Actions>
        </ItemType>
    However - when I open an SAP task from the UWL it opens the same as it did before - I see no difference at all.  Any help is appriciated and rewarded.

    TA,
    try to clear cache under
    System Administration->System Configuration->Universal Worklist & Workflow-> Universal Worklist-Administration->Cache Administration Page
    Thanks
    Bala Duvvuri

  • Accessing local clipboard with SAP GUI for HTML - alternatives?!?

    I need some creative suggestions (PLEASE!!!) to a problem that weu2019re having replicating functionality that works in SAPGUI but which we canu2019t get working in SAP GUI for HTML.
    In SAPGUI we are able to open an external browser and pass a URL for the page we want to open.  Once the page is open the user enters some data and receives a response which we then copy to the local workstation clipboard.  From within ABAP we then read the clipboard contents and then copy them in to a field in the SAP screen.  It works BRILLIANTLY! 
    However, Iu2019m not able to get the same functionality to work in SAP GUI for HTML with method CLIPBOARD_IMPORT of CL_GUI_FRONTEND_SERVICES.  Apparently this class and the methods can not be used in SAP GUI for HTML u2013 however OSS note 314568 seems to suggest otherwise with this statement:
    Clipboard access
    In SAP GUI for HTML it is not possible to:
    - read or write the clipboard using ABAP Objects class CL_GUI_FRONTEND_SERVICES.
      This limitation no longer exists with ITS 6.20 Patch 23, SAP Netweaver 2004 SP 19 and SAP Netweaver 2004s SP 10.
    Has anyone been able to use the class CL_GUI_FRONTEND_SERVICES to read from the Clipboard since this statement was made in this OSS note?
    And my bigger question u2013 does anyone have a creative idea for a solution that will work?

    Thank you experts,
    Your answers have been really helpfull, we have to try another method, by Studio Program or ABAP code, unfortunely we have to implement this in so many computers, so is impossible to configure one by one.
    Thanks to both, and have a nice 2009!
    Ricardo Pineda
    Edited by: Ricardo Pineda on Jan 13, 2009 2:09 AM

  • BBS BEX Query to R3 Transaction - Connect to SAP GUI for HTML not to R3 Backend-TA

    Hi Experts,
    I try to customize a report-report-interface from a bex query to R3 transaktion fs10n.
    I configurated everything in TA RSBBS within BI.
    When I start the BBS from the BEX Query a browser session opends, I have to enter the login data for the R3 system an SAP GUI for HTML is started.
    Several years ago I tried the same and was connected directly to the Backend-Transaction within R3.
    Was there a change within the last year?
    Is it possible to configure somewhere in R3 or BW that I want to be tranferred to the Backend-TA and not to open a SAP GUI for HTML?
    Can someone help?
    Best regards
    Mirjam
    (SAP Netweaver 7.31 -> SAP ECC 6.0)

    Hi Stephen,
    You should try running one of these transaction iViews using Firefox and have Firebug installed (or use HTTP watch in IE). This might show you why the styles are not being loaded, it could be that since the upgrade something has changed in the SICF configuration settings that is blocking the download of the CSS... that is just a guess, but if you use a tool that will show you the HTTP traffic (like Firebug) then you might get a better idea of what is going on.
    Hope this helps,
    Simon

Maybe you are looking for