Configuration of LDAP through the Console

I am trying to create a customized object class to meet our specific needs on <b>LDAP - iplanet.</b> Everytime I try to add the customized object class to the users in an OU I get a message of Object class violation. I am not a programmer therefore I work out of the console.
I need help as I need to configure LDAP to receive HR data that is then going to be sychronized with our CUA master client for user creation.
Thanks in anticipation.
Pawan

Were you able to get the specific HR data sychronized with LDAP? We are working on this now and would like to know how you managed this task. THANKS

Similar Messages

Managing a custom property through the console

I'd like to create a boolean property that I mange through the console. It is
basically a timing mechanism that I need to be able to turn on and off without
recompiling or restarting the WLS server. I've done some looking at the documentation,
but I can't see where I could create my own custom property...
We are using 5.1 right now and plan to migrate to 6.0 within the next month.

The user names are stored in table USR01. IN that table see if you can add a field to have region. Extract this table and store it in User info object in BW.
You will need a ABAP person to do this, if you are new to SAP.
Ravi Thothadri

Can i add a servlet through the console in weblogic v6.0

can i add a servlet details through the console. or is editing the
          weblogic.xml and web.xml files is the only option.
          any help will be deeply appreciated.
          thanks
          sathish


You can add a webapp using console but not a servlet individually.
          Kumar.
          sathish subramanian wrote:
          > can i add a servlet details through the console. or is editing the
          > weblogic.xml and web.xml files is the only option.
          >
          > any help will be deeply appreciated.
          >
          > thanks
          > sathish

I can not access the switch through the console (solved)

Hello,
I'm having a problem.
I can not access the switch through the console. The web interface is working properly.
Model: SRW224g4
Below some pictures.
The HyperTerminal settings
error:
If anyone can help me?
Thank you and excuse the bad English.

Hello Rumenigue,
It looks to me like you are using a console cable. The reason you usually see them the other way around is because with a console cable the RJ-45 end goes into the device (an ethernet jack labeled console) whereas on this switch the console port is serial itself.
Usually the serial end of the cable you have plugs into a USB to serial adapter (because most computers today don't have serial ports anymore) and that USB connection goes into your PC, creating the virtual COM port you need in HyperTerminal.
So if you get a USB to Serial adapter you could plug that from USB to the console port, or if you computer has a serial port of its own just connect a serial cable directly from the PC to the switch, then use HyperTerminal with the settings recommended above by Tom.
Hope I have helped,
Christopher Ebert
Network Support Engineer - Cisco Small Business Support Center

[SOLVED] Set keyboard property through the console

Hi,
in the GNOME Keyboard properties, there is the option "Key presses repeat when key is held down" option. How can I set this option without GNOME, Any Xorg pros here that can help me? Maybe with setxkbmap? But I don't see what option I must use there. Or do I need a xorg.conf setting? I've read all the man pages.
Why do I need this? I have a game running on a seperate XServer in wine that only works properly when that setting is disabled.
Thanks
/Edit: Solved! xset r on/off does the trick.
Last edited by scrawl (2010-02-06 20:21:40)

Hello Rumenigue,
It looks to me like you are using a console cable. The reason you usually see them the other way around is because with a console cable the RJ-45 end goes into the device (an ethernet jack labeled console) whereas on this switch the console port is serial itself.
Usually the serial end of the cable you have plugs into a USB to serial adapter (because most computers today don't have serial ports anymore) and that USB connection goes into your PC, creating the virtual COM port you need in HyperTerminal.
So if you get a USB to Serial adapter you could plug that from USB to the console port, or if you computer has a serial port of its own just connect a serial cable directly from the PC to the switch, then use HyperTerminal with the settings recommended above by Tom.
Hope I have helped,
Christopher Ebert
Network Support Engineer - Cisco Small Business Support Center

Configured local login on the console, but forgot to create a user...

I saved the config, restarted and now I can't log in. Is there any way to undo this change? Should I just follow the normal password reset procedure (press the mode button, backup config, etc) and then create a login this way?
I assume so, but I'm 50/50 on if I should just clear the whole thing out and start over since I'm not THAT far in.
Thanks!

I saved the config, restarted and now I can't log in. Is there any
way to undo this change? Should I just follow the normal password
reset procedure (press the mode button, backup config, etc) and then
create a login this way?I assume so, but I'm 50/50 on if I should just clear the whole thing out and start over since I'm not THAT far in.Thanks
Hi,
First check out that you are able access the router via telnet or console,I mean if your are getting the username prompt.If you are getting the username prompt then try the local username which you have configured.If that isn't working then try for password recovery to make this router as if like new one.
Check out the belowlinks on password recovery for different routers series
http://www.cisco.com/en/US/products/hw/routers/ps259/products_password_recovery09186a0080094675.shtml
http://www.cisco.com/en/US/products/hw/routers/ps274/products_password_recovery09186a0080094774.shtml
http://www.cisco.com/en/US/products/hw/routers/ps221/products_password_recovery09186a0080094773.shtml
and also check out the below link on how to configure local user database in routers
http://www.petri.co.il/csc_how_to_configure_local_username_database_cisco_ios.htm
Hope to help.
If helpful do rate the vlauable post.
Regards
Ganesh.H

How to display the current domain entry in LDAP through Console ?

I've created serveral domain and user account through iDA v4.5 web page. But, why I could not see any new entry added into LDAP through Netscape console ? I'm using iMS 5.1

Hi Philip,
You did not provide much details for people reading you to assist you.
Anyway, what I have understood from your question is:
when I create new entries under my new domains (other that the first domain created) through the iDA, I cannot retrieve them through the console (using users & groups).
If this was your question then the answer is because:
- the default first domain generated by the iMS is very often stored under your Users Directory Suffix like o=my first domain, o=organization.com. So, when you perform a search of users of that domain you will find them through the users & groups of the Console.
- new domains created are very often stored under o=internet. So, when you search through the users & groups of the Console, you cannot find them as they are not under your o=organization.com but under o=internet.
(the iMS and iDA guides explain how to configure that)
Remark: ldapbrowser softwares could be a good option to perform searchs to various domains without having to change the Administration's User Directory suffix to find your users.
Hope this would help.
Cheers / Damien.

Configure Apple TV through MacBook Pro?

Is there a way to configure Apple TV through the MacBook Pro? I'm trying not to buy another remote.

Welcome to the Apple community.
Unfortunately, there is no way at all of configuring the Apple TV from your computer. Unless your Apple TV is already connected to your network (in which case you can use the remote app on your iOS device) then you will need to purchase a new remote control.

Re:The console changes

Hi,
We are facing an issue where we are trying to make the changes through the console, but the console is not taking the changes even though we are making changes as administrator.
<Nov 12, 2010 1:07:54 PM EST> <Error> <Console> <BEA-240003> <Console encountered the following error java.rmi.RemoteException
: [Deployer:149150]An IOException occurred while reading input. : with response code '401' : with response message 'Unauthoriz
ed'
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToServerURL(HTTPMessageSender.java:297
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToTargetServer(HTTPMessageSender.java:
123)
at weblogic.deploy.service.internal.transport.CommonMessageSender$1.run(CommonMessageSender.java:283)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Nov 12, 2010 1:25:26 PM EST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url i
s /console/console.portal?_nfpb=true&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethandle=com.bea.c
onsole.handles.AppDeploymentHandle%28%22com.bea%3AName%3Dccrs%2CType%3DAppDeployment%22%29.>
<Nov 12, 2010 1:29:08 PM EST> <Error> <NodeManager> <BEA-300034> <Could not execute command "kill" for server "ccportalServer1
" using the node manager. Reason: Connection refused. Couldn't connect to NodeManager. Check that it is running at localhost:5
556.>

Hi,
We are facing an issue where we are trying to make the changes through the console, but the console is not taking the changes even though we are making changes as administrator.
<Nov 12, 2010 1:07:54 PM EST> <Error> <Console> <BEA-240003> <Console encountered the following error java.rmi.RemoteException
: [Deployer:149150]An IOException occurred while reading input. : with response code '401' : with response message 'Unauthoriz
ed'
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToServerURL(HTTPMessageSender.java:297
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToTargetServer(HTTPMessageSender.java:
123)
at weblogic.deploy.service.internal.transport.CommonMessageSender$1.run(CommonMessageSender.java:283)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Nov 12, 2010 1:25:26 PM EST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url i
s /console/console.portal?_nfpb=true&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethandle=com.bea.c
onsole.handles.AppDeploymentHandle%28%22com.bea%3AName%3Dccrs%2CType%3DAppDeployment%22%29.>
<Nov 12, 2010 1:29:08 PM EST> <Error> <NodeManager> <BEA-300034> <Could not execute command "kill" for server "ccportalServer1
" using the node manager. Reason: Connection refused. Couldn't connect to NodeManager. Check that it is running at localhost:5
556.>

Can't access msg server instance through admin console

I am running
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS cosmos.scranton.edu 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-V245
along with [20/Feb/2008:14:39:46 -0500] - Sun Java(TM) System Directory Server/5.2_Patch_4 B2005.230.0041 (64-bit) as the config DS
The console webserver is
[20/Feb/2008:14:42:00] info (26032): SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
and
# ./mpsadmconfig -version
Administration Server Command Line (admconfig) version 5.2
Copyright (c) 2001 Sun Microsystems, Inc.
I can manage the DS through the Console just fine. If I try to access the msg server nothing happens.
I see the following error in the ds admin-serv/logs/error log
[21/Feb/2008:08:41:35] warning (26033): for host ::ffff:134.198.6.4 trying to GET /msg-config/tasks/operation/cgi_root, send-cgi reports: cannot find CGI program /opt/luminis/products/ds/bin/msg/admin/bin/cgi_root (No such file or directory)
This cgi_root file is a pointer to /opt/luminis/products/mail/lib/cgimsg which does not exist
It applied patch 115610-25 which (I'm under the impression) has the Admin console in it. It didn't fix it though
So, does anyone know of a patch that just has the Admin Server / Console or does anyone running 32 bit Sparc Solaris 10 have a cgimsg file they can lend me? (I'll give it right back!)

chris_krall1 wrote:
I can't argue with that Shane. Well you can argue but there isn't anything I can do about it unfortunately. The decision to stop using the admin console was a 'big-picture' sort of deal.
Well sort of - this didn't work when I first installed msg 6.2-4.04. The core patch 6.3-5.02 (120228-25) was applied through smpatch more or less inadvertently. Anyway I guess I will have to learn the command line interface. I really only wish to apply certs to the various services and turn on ssl
I was able to request and apply the cert through msgcert, so I will try the next steps and see how it goesmsgcert was added to 6.3 for entirely this reason -- a replacement was required for the functionality lost due to the dropping of the admin console.
Regards,
Shane.

MBeans and the console

I have 2 questions about JMX in jeneral and the consloe specific.
1. how do I 'register' the MBean with the WebLogic MBean management system? in
Sun JMX implementation you do
server = MBeanServerFactory.createMBeanServer();
server.createMBean(mbeanClassName,mbeanObjectName);
How will this be done in WL, Will just deploying the bean will recognize the MBean
functionality and will do it automatically?
2. Through what can I manage the MBeans? I was able to manage the WL server
MBeans through the command tool (and of course the admin console), will I be able
to manage MY MBeans through the Console (somehow add them to the console components?)
or using the command line admin tool?, or it will only work with a client software?

With the current version of WLS 60 sp1, registering custom mbeans on the server and then
checking the values/ accessing them through the console is not supported. This would be
added in some future releases.
Mihir
Mike Altarace wrote:
I have 2 questions about JMX in jeneral and the consloe specific.
1. how do I 'register' the MBean with the WebLogic MBean management system? in
Sun JMX implementation you do
server = MBeanServerFactory.createMBeanServer();
server.createMBean(mbeanClassName,mbeanObjectName);
How will this be done in WL, Will just deploying the bean will recognize the MBean
functionality and will do it automatically?
2. Through what can I manage the MBeans? I was able to manage the WL server
MBeans through the command tool (and of course the admin console), will I be able
to manage MY MBeans through the Console (somehow add them to the console components?)
or using the command line admin tool?, or it will only work with a client software?

Access current user's manager name in the console application ( through Client object model)

Hi Guys,
Is there any way to retrieve current logged-in user's Manager name in the console application.
As I don't have access to the server where SharePoint 2010 is installed so I wanted to access through client object model.
arun singh

Unfortunately, you can't use CSOM to do this in SharePoint 2010 (you can in SharePoint 2013!), but you CAN use the User Profile Service .asmx web service to accomplish this. You need to call the
GetUserProfileByName method exposed
in the http://<yourServerName>/_vti_bin/UserProfileService.asmx web service. Pass in the user name for the current user and Manager will be one of the properties that is returned.
Here is a link to a blog post with example code.
Please mark my reply as helpful (the up arrow) if it was useful to you and please mark it an answer (the check box) if it answered your question! Thank you!
Danny Jessee | MCPD - SharePoint Developer 2010 | MCTS - SharePoint 2010, Configuring
Blog: http://dannyjessee.com/blog | Twitter: @dannyjessee

Can't configure Identity Synchronization for Windows through Server Console

Hi everybody!
I am trying to get Sun Java System Directory Server EE talking with Windows Active Directory buy my progress has come to a halt getting Identity Synchronization for Windows 6 configured and working. I would appreciate any hints!
Here are the steps I have taken:
1. I installed Directory Server Enterprise Edition 6.3.1 using native packages, no problems there (in terms of adding resources to directory, browsing them, etc).
2. I installed the Message Queue (3.6 05Q1) that is bundled with the zip archive of DSEE
3. I installed Identitty Synchronization for Windows (6), that is bundled with the zip archive of DSEE
4. Logged into Sun Java System Server Console as per instructions after install.
Here is where I am stuck!
I logged in, but something is really weird! Here is what my structure looks like in the default view:
domain name
+Server
++Server Group [desc: Directory Server 6.0 /opt/SUNWdsee/ds6]
++Server Group (1) [var/mps/serverroot]
+++Administration Server
+++Identity Synchronization for Windows [details are totally blank... even icon is an empty blue square!]
This is the second time I went through the process of installing all this stuff, I made sure to pay attention to the installation instructions as best as I could, but I am very new to Solaris and unfortunately am on an extremely tight deadline.
I am suspecting the problem has something to do with ports or directories, but my knowledge of Solaris is not even at a level where I can troubleshoot this by myself. Even if you have some advice that seems stupid to you, please let me hear it! I am pretty stupid, I might benefit from it!!
Please, if anyone has any hints or suggestions, I would love to hear them. Like I said, I configured all this while following the installation guides, but I am worried I missed something or misunderstood something.
Thanks in advance,
Al
Edited by: newtmonkey on May 25, 2009 2:05 AM

Hello wlier, thanks for all your help with this! I really appreciate it.
Reinstalled this whole thing, and at least I got everything under one server group... still can't access ISW though... it is listed in the leftside pane, but when I click on it the rightside pane goes completely blank.
~status of idsnyc is:
-no connectors were found
-System Manager Status: Started
next step is "1. create an initial configuration using the product's console..."
~installed/configured everything as root
~no errors generated when I login to the console, but when I expand the hostname in the leftside pane I get the following error:
Exception in thread "Thread-2" java.lang.UnsatisfiedLinkError: /usr/lib/mps/libjss4.so: ld.so.1: java: fatal: libnss3.so: open failed: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1676)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:993)
at org.mozilla.jss.CryptoManager.loadNativeLibraries(CryptoManager.java:1443)
at org.mozilla.jss.CryptoManager.initialize(CryptoManager.java:912)
at com.netscape.management.client.util.UtilConsoleGlobals.initJSS(Unknown Source)
at com.netscape.management.client.util.UtilConsoleGlobals.getLDAPSSLSocketFactory(Unknown Source)
at com.sun.directory.wps.ui.gui.view.PSWServer.<init>(PSWServer.java:71)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at com.netscape.management.client.topology.ServerNode.createServerInstance(Unknown Source)
at com.netscape.management.client.topology.ServerNode$ServerLoadThread.run(Unknown Source)
~If "run the Administration Server from the Server Group" means what I think it means, I can do that with no problem. I can double click on the Administration Server and configure various options, start/stop the server, etc.
~I just have one interface/hostname configured, and the Server Console shows the correct name
It's like it's not making the connection to the ISW server (btw, it is listed as "isw-solaris1"... is this okay? "solaris1" is the hostname for this server). From what I understand after logging in to Server Console as Directory Manager, it should be asking me for a password to access ISW, but I don't any kind of login/password prompt.
I should be logging in to Server Console on the port I configured during ISW installation, right? In my case, port 1390.
We don't have a service plan and I doubt my company would want to spring the cash for it, so I'm pretty much stuck!!

How to configure Wake On LAN to work through the Internet?

I'm using an iOS app to wake my desktop computer. It works perfectly fine when I'm within my WiFi range. However, when I'm out of my Linksys E3000 access point, it no longer works over the Internet. So, if anyone can point me to documentation that have step by step instruction on how to configure this through the Linksys E3000 access point, I'll be grateful.

Hi ohgosh,
I believe your computer is already configured and has all the requirements for Wake on Lan since it works locally. To do it remotely you need to open the regular port numbers used for WOL like UDP ports 9 and 32767. Your desktop IP address must be set to static because that's what you need to enter on the port forwarding page of your router. You may use this link below for instructions on how to do port forwarding on your router.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9b27a0c1bb9496d8c22d0d55f875ddf_17241.xml&pid=80&...
Another option is to set up DynDNS on your router. With this, you need to subscribe to DynDNS.com. I found some online links that could help you enable WOL remotely:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=3ff9013e9f4f4a0b9d9805b0697407b7_4578.xml&pid=80&r...
http://lifehacker.com/5786791/rule-your-computer-from-afar-by-setting-up-wake+on+lan
http://www.dslreports.com/faq/9389
http://www.teamviewer.com/en/res/pdf/TeamViewer-Manual-Wake-on-LAN-en.pdf
Hope this helps!

Configuring using AAEI have been going through the following document. http

I have been going through the following document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?quicklink=index&overridelayout=true
1. I have a JMS to Proxy scenario async. How do I make this scenario configured using Integrated configuration in 7.11 using AAE to improve the performance of this scenario?
I know it is not supported by Proxies?
Plz let me know the steps required for the same?
2. I have a file to Proxy scenario - Async. Can I configure the same using integrated configuration scenario?
Thanks
~N

Hi
Please check the following links for AAE with proxy
ABAP Proxy sender possible in integrated configuration AAE with PI 7.11
/people/makoto.sugishita/blog/2009/10/23/a-new-feature-in-netweaver-pimessage-protocol-xi-30-in-soap-adapter
Regards
Abhijit

Configuration of LDAP through the Console

Similar Messages

Maybe you are looking for