Configuration of Maintenance Optimizer and IMG-configuration

Hi!
I am installing SAP Solution Manager 4.0 and two ERP-systems and would like to ask, whether a suitable detailed documentation about
Configuring Maintenance optimizer
IMG-Configuration
does exist?
P.S. Besides the document "Step by step Confugaration of Maintenance Optimizer" or .sim-File.
Thank you very much indead!
regards

Dear Axel,
Kindly review the URL :
http://service.sap.com/solman-mopz
On the first page at the bottom end you would find an PDF for configuration of Maintenance Optimizer and also an SAP Tutor file for the same.
Follow the steps and you are ready with the optimizer for downloading packages.
Hope the above information helps.
Regards
Amit Devale

Similar Messages

Configure maintenance optimizer

Hi,
I am configuring "Configure Maintenance Optimizer" and I get the following error when I use T-code SM_MOPZ.
SAP MOPZ auto-configuration warnings
Message no. IMG_FASTCONF030
What's happen with my SOLMAN system?
Please advise!!
Thanks
Duypm

Hi Duypm,
Its a long process to go.
First, Raise a message with SAP for SAPROUTER certificate if you are planning to use SNC. You need to provide a public IP of your SAPRouter machine in the message.
Second, Send the filled form to SAP
Configure SNC on SAPRouter
Configure OSS1 and SAPOSS rfc destination.
Then configure Maintenance Optimizer.
Cheers.....,
Raghu

Maintenance Optimizer - Systems and Logical Components are not displayed

Hi Experts,
When I use the Maintenance Optimizer and select a product version, I do not get any Systems and the relevant Logical Component so that I can select one of those that are displayed. Did I miss any configuration settings or is there anything else that I need to do. Please give me the checklist that I need to look into before selecting a product version in the maintenance optimizer. Please help me out of this.
Thanks in advance,
Sagar.K

Hi,
Check this link... it has complete step by step configuration of Maintenance Optimizer...
https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
https://websmp208.sap-ag.de/solman-mopz --> SAP Tutor on Maintenance Optimizer
Award points if found useful

Maintenance Optimizer in SAP Solution Manager

what is Maintenance Optimizer in SAP Solution Manager and what are its benefits

Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
     Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
     Select Header Data
     Click Installed Product Versions
     In the product box add whatever you require for this system
     Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
     User:      <Username>
     Pass:   <Pass>
     Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
     Select NEW
     Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
     Select Solution Landscape Maintenance
     Select System Groups and Logical Components Tab
          Open Solution Landscapes
               Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
     GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply

Local logical system is not defined-Maintenance Optimizer Config

Hi,
When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
But I have created a Logical client using SCC4.
And the other thing is for this created client, does not have any users on this client, If I run,
SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
Answer is "no rows selected"
So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
Thank you!

First of all, 'Logical System' and 'Logical Client' are two different things.
For Client Problem:
You did create a client in SCC4.
1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
For MOpz issue:
Could you please search in sap marketplace for any particular note specific to MOpz ?

Maintenance Optimizer - ConfigTool.sh - SAP NetWeaver 7.0

Hi Everybody,
First I wanted to set up my MOPZ to do this I have to create a RFC "SAPSLDAPI"
Until there no problem but the next step become a little more problematic.
I have to run the admin tool /usr/sap/SOL/..../j2ee/admin/go.
Unfortunatly I lost the password's J2EE_ADMIN, no problem google is your best friend and then I tried to run the config tool. Oh big surprise
The java class not found: com.sap.offline.OfflineToolStart
What can i do to fix this problem?
Note 1024932 - Maintenance Optimizer: Collective Note
http://help.sap.com/saphelp_nw70/helpdata/en/b7/341241d71cd349e10000000a1550b0/content.htm
Edited by: Hafid CHEBRAOUI on Jan 14, 2009 4:22 PM

It sounds like you have two different issues here.
MOPZ
And Java Stack not starting.
Maintenance optimizer requires that your connection to SAP is in tact first through the saprouter. Do you have all of that in place and is your rfc connections for SAP_OSS and SAPNET_RFC working.
SAPSLDAPI is a connection for the SLD not for the maintenance optimizer.
The link you put below doesn't have anything to do with configuring maintenance optimizer. The ossnote you posted is a collective note for maintenance optimizer and points you to spro to follow the instructions.
Review https://websmp108.sap-ag.de/solman-mopz
Review ossnotes 990534 and 1024932
try running SE38 SM_PREP_MAINTENANCE_OPTIMIZER That may give you some assistance.
Anyone that is going to download using the maintenance optimizer needs to exist in transaction AISUSER
As for the Java stack.
It sounds like your path is not right. Did you update your path environment variables with the installation directory of java? Check that java -version is working from the <sid>adm login.
Lee

No available selection for stack target at maintenance optimizer

Hi all,
I have an issue. You can see from the screen shoot. I can not select target stack. What should i do at this moment? I want to configure for an ERP test system.
Thanks and best regards.

Hello,
This type of issue is a consequence of an error that went on before. The errors are usually caused by LMDB definition.
In order to determine what has gone wrong, please check the log tab. Also, the product version that you chose in Maintenance Optimizer and the LMDB definition are interesting information .
If system information privacy is a concern, you can open a support message for component SV-SMG-MAI.
Best regards,
Miguel Ariño

How to delete the redundant sessions in Maintenance Optimizer?

Hi experts,
As it said in title, how to delete the expired sessions as the screenshot below in Maintenance Optimizer and keep SAP Solution Manager clean?
Thank you in advance.
Best Regards,
Pany

Hello,
Check here Deleting existing maintenance optimizer transactions
Please refer to the note 845433 , with the report CRM_ORDER_DELETE and transaction type SLMO,you can delete those maintenance optimizer, hope this help to you
BR,
K.

No System Found in Maintenance Optimizer

Hi,
I have installed solution manager (ST 400 SP09) and did apply the relevant notes to setup the Maintenance Optimizer.
I could able to see the Maintenance Optimizer button in Support Package and Stack Inbox.
(Transaction SOLUTION_MANAGER> select the Solution->operation ->Change Management ->Support package Stack)
But I found following message No Systems Found along with the following message
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
How do I proceed further? I wanted to see the Systems defined under SMSY transaction to be displayed here.
Can any body help me by providing the exact steps define the systems in Maintenance Optimizer and how to sync the components defined under SMSY with MOZ?
Regards
Arati

Hi Amit
This doesn't resolved my issue.I am getting following message
No entries exist, double-click for long text
Message no. SV065
Diagnosis
No entries were found when importing data from the database.
Procedure
To create new entries, choose the function Edit -> New Entries.
To recover deleted data, you must first display it with the function
Select -> Display Deleted, and then discard changes with Ctrl. + F2 or
the "Discard Change" button.
Thanks
Arati

Stack File for JSPM when using Maintenance Optimizer

Hello,
As you know JSPM looks for a stack file when applying a support pack stack. When using maintanance optimizer I see no way to get a stack file. I end up having to do the work twice: once to get the files in maintenance optimizer, and again I have to go to marketplace swdc to choose the files and create the list of downloads again only to save a stack file.
Am I missing something? Is this double work really necessary?

Hello John,
It seems that you are doing double work.
If you use the download type as "SLM" then you have a chance to transfer the XML to SLM. Else if you choose the download type as "Download Manager" then the XML should be created in the EPS/in folder of the Solution Manager system.
You also need to check whether you have applied all the applicable notes for the Solution Manager stack from the note 1122966 and that the BC sets for MOPZ are activated correctly.
Finally check the permissions on the EPS/in folder of Solution Manager to check whether there is a issue with authorizations.
A SLG1 log ( filtered by the username who creates the MOPZ transaction and time at which the transaction was created ) will reveal the errors in the process.
Regards
Amit

How to approve in maintenance optimizer for download.

Dear All,
I need to download support pack and other software like SAP JVM Switch tool 1.0 from service market place.
It is asking for approval, Could you please specify which tcode is needed for maintenance optimizer and step by step
solution to approve the software.
Regards,
Dilip

Hi Dilip,
refer link :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304f52c1-3aae-2910-6081-8d1deace58f3?QuickLink=events&overridelayout=true
look for section Maintenance optimizer - Screens , where step by step screen shots are provided to approve packages.
You need to go to Tcode DSWP --> go to correct/active solution --> Change management --> Maintenance optimizer
Make sure that the SAP user id you are trying to access have S user id linked , check Tcode AISUSER
Regards,

Solman_setup and maintenance optimizer configuration

Hi
We've newly installed Solution Manager 7.0 EHP1 and we want to configure maintenance optimizer for approving SP. Is it mandatory to use solman_setup tcode or can we configure maintenance optimizer via tcode solution_manager and smsy.
Best Regards...

Hi
IT better if u use Solman_setup because it will run a wizard and do the needful and in a proper manner but still if u are expert and have already done the setting in previous version then u can it urslf.
Go through the links to know more about this solman_setup wizard settings.
New Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700001927282008E
Demo on Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700000316542009E/Procedure_Configuration.exe
Hope it will help ur more
Regards
Prakhar

Configuring Maintenance Optimizer issue

Hi All,
This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
I followed the IMG guide step by step.
But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
Instead I get a message:
<b>Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).</b>
Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
Please do let me know what would be the issue.
I have followed the note 990534 and doen with the BC sets.
But I am not sure where am I making a mistake.
One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
I have completed the solution landscape, logical component, etc.
Please help...
Regards,
Sapfan

Hi JP,
My current SP levels are:
SAP_BASIS - 0011
SAP_ABAP - 0011
PI_BASIS 2005_11 - 0011
ST-PI 2005_11 - 0003
SAP_BW - 0011
SAP_AP - 0007
BBPCRM 5 - 0007
CPRXRPM - 0007
ST400 - 0010
ST-ICO - 0008
ST-SER - 0007
The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid SAPRouter once all the SM config is done.
I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
I changed back the UME source to client 001, but still same.
Moreover the maintenance optimizer is not showing the satellite system.
I am really stuck.
Please let me know if you require more information.
I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
I started this only after applying SP10.
Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
WIll the system not reflect is the java ebngine is down???
Regards,
P.K

Maintenance optimizer configuration Steps

Dear All,
I am stuck with Maintenance optimizer configuration.
Can somone provide a usefull link for the same i am using SOLMAN 4.0 with SP 15.
Best of regards,
Gaurav Sood

Hi ,
Here are the steps :-
MAITENANCE OPTIMIZER STEPS
1) Create the system in solution manager (Tr.code-SMSY)
2) For this System to create the rfc destinations.
3) Create the logical component for system.
4) Maintain technical settings of OSS in the transaction code: OSS1
5) In TR code AISUSER maintain the user and OSS id
6) In DSWP transaction codeu2014in settings-global settings have to maintain OSS id and Password.
7)go to tr code DSWPu2014changemanagementu2014support packagesu2014click on maintenance optimizeru2014select the systemu2014continue-confirm files in download basketu2014complete transaction.
Thanks
Abullais

Maintenance Optimizer Configuration Guide

Hi All
I have a fully installed version of Solution Manager 4.0 SP12 and I am looking to configure the Maintenance Optimizer for monitoring our ECC and BW systems.
However, I feel that rather than using the wizards I need to set it up step by step.
My question, is there any documentation on how to set this up from Start to finish?
Manay thanks
Phil

Hello Guys..
The Step by Step Configuration of Maintenance Optimizer link is :
https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
Revert points is appreciated
Thank you..

Configuration of Maintenance Optimizer and IMG-configuration

Similar Messages

Maybe you are looking for