Configuration of oim 10g and oam 10g.. and integrating oam10g with oid

Hi..
i am trying to configure OAM10g and OIM10g and integrate OAM10g with OID..
please send me the documents if any had...
Thanks & Regards,
avinash

For integrating OIM 10g with OAM 10g, refer doc below:
http://docs.oracle.com/cd/E14899_01/doc.9102/e14761/oamsso.htm#sthref78
For OAM and OID integration refer:
http://docs.oracle.com/cd/E15217_01/index.htm
regards,
GP

Similar Messages

  • OIM 9.1 and OAM 10g integration document

    Hi,
    Could you please provide me any link or document for OIM 9.1.0.2 integration with OAM 10g ?
    Thanks
    Sandy

    Best Practices Document:
    http://download.oracle.com/docs/cd/E14899_01/doc.9102/e14761/oamsso.htm#sthref78
    Within OIM, once you have configured OAM to pass a header variable, it's just 2 parameters that change in the OIM xlconfig.xml file.
    -Kevin

  • Integrating EBS12 with OID and Oracle Single Sign-On

    Hi All,
    I recently installed EBS12 and followed all the instructions on metalink note 376811.1 to integrate it with OID and OSSO server.
    At the end of integration to verify SSO integration with EBS12, when I access EBS login page via http://[host]:[port]/OA_HTML/AppsLogin, the following error message is displayed:
    << Start of Error Message>>
    500 Internal Server Error
    java.lang.NoClassDefFoundError
    at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120)
    at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:161)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    << End of Error Message>>
    Please let me know what can be the cause of this error?
    Thanks,
    Shyam

    PLease use NOTE.249669.1 How To Collect Apache and Jserv Debugging Details
    You will collect more informations.

  • SQLDEVELOPER 2.5 and above on WinXP/Win7 does not work with OID auth ?

    Hi,
    I have SQLDEVELOPER 1.5 on my WinXP which works fine with database local users as well as global users(OID) authentication. But with SQLDEVELOPER 2.5 and above it throws below error with OID authentication.. local user authentication is however fine.
    Status:Failure-test failed:unsupported verified type
    Any idea why Sqldeveloer 2.5 and above does not work with OID auth?
    Thanks for help
    Sivaji

    It might be to do with the oracle client version or the JDBC version. (for example v3 needs the 11i jdbc drivers and associated dlls for oci connections.

  • URGENT: OAM 10g server and webgate certificates query

    Hi experts,
    There is an OAM 10g environment. OAM Access Server and Identity Server is installed and up and running. OAM servers are in CERT mode. So to install webgates residing in different machines from OAM servers, can we use the same OAM Access Server certificates for WebGate certificate while installing WebGate?
    Thanks
    IDM Team.
    Edited by: 898990 on Mar 13, 2013 1:38 PM

    Figured it out. The OAM proxy (AccessServerConfigProxy @port 5575) for 10g webgates was configured to listen in cert mode. I had to switch it to open mode. Not sure how it got switched, but got the webgate install going for now. Thanks.

  • How do I configure my system so that Oracle 10g properly shuts down and sta

    How do I configure my system so that Oracle 10g properly shuts down and starts up when I reboot my Solaris system?

    http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref255

  • OAM 10g - obmygroups and nested dynamic groups

    I've run into an issue with the obmygroups header action in OAM 10g, and I'm not sure whether this is by design or not.
    The obmygroups will return static and dynamic group names for which the user is a member, and it will return static groups that contain nested static groups where the user is a member of the nested group. However, it doesn't seem to static groups with nested dynamic groups where the user is a member of the nested dynamic group.
    Is that by design? Is there any way to nest dynamic groups so that obmygroups will return the parent group name? I'd like to have a group that contains both nested static and nested dynamic groups, and have the obmygroups action return the name of the parent group.
    Thanks,
    Matt

    Return Attribute Action in authentication or authorization rules
    obmygroups:<ldap_url> special attribute returns those groups to which the user belongs that also satisfy the criteria <ldap_url> filter specifies.
    EX: "obmygroups:ldap:///cn=Groups,dc=myorg,dc=com??sub(group_type=role) returns all the groups in cn=Groups,dc=myorg,dc=com tree for which the logged-in user is a member and the group_type is role.
    For more information check OAM Access Administration Guide

  • Compiling error ORA-00600 with Forms 6 and Database 10g

    Hi,
    I am using "Oracle Database 10g Enterprise Edition Release 10.1.0.4.0" and "Forms [32 Bit] Version 6.0.8.26.0 " with patch 17, when i compile a form that works with some tables in another database under dblink the error ORA-00600:internal error code, arguments:[16203],[],[],[],[],[],[],[] is displayed.
    If i word with reports or sqlplus no error is displayed.
    Before we installed 10g everything worked ok
    What is wrong with forms or do i need to configure something else?
    Regards
    Yuri V. López Manrique

    I searched for this error on Google and found the following blog:
    Is there a tool to troubleshoot ORA-00600 and ORA-07445 errors?
    February 27th, 2006 By Fahd Mirza
    ORA-00600 and ORA-07445 errors are the most esoteric errors in Oracle.
    There is a tool called “ORA-600/ORA-7445 Troubleshooter” available at Metalink. It asks for the first argument of ORA-600 error with an optional database version number.
    For example, to see the description of the error:
    ORA-00600: internal error code, arguments: [723], [25908], [25908], [memory leak]
    You enter 723 in the “ORA-600 First Argument” field. The first argument is a pointer to where in the code the error was caught and thus is the key information in identifying the problem.
    You can also embed (copy/paste) the “Call Stack Trace” there, and, when you click on the “Search Call Stack” button an advanced MetaLink search is performed to find documents containing relevant sections from the call stack.
    Call Stack extracts from the following files are supported:
    * Generic foreground and background server trace files located in background_dump_dest and user_dump_dest
    * OpenVMS NETV2 and BEQ log files located in ORA_ROOT:[NETWORK.LOG]
    * WINDOWS CORE.LOG files
    * GDB (debugger) backtrace call stacks (best endeavors)
    Of course you will need a login to Oracle's Metalink site.
    Hope that helps,
    c

  • Reports Graphics and OAS 10g

    I made a report with a pie char in developer 10g, it runs OK and i see the char in my desktop. When I execute the report (.rep) in OAS 10g (Forms a Reports Services) via the rwservlet, the resulting PDF file contains everything but the chart doesn't appears (white page). Is there any kind of configuration I need to adjust?

    Hi,
    This is strange. There is no additional configuration needed for charts. If your reports are running fine, it means you should be able to get charts in the output. Does the same problem reproduce if you change the output format from PDF to HTML or HTMLCSS?
    Navneet.

  • How do I map Hitachi SAN LUNs to Solaris 10 and Oracle 10g ASM?

    Hi all,
    I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
    for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
    My question is this:
    How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
    I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
    I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
    I cannot find this critical piece of information ANYWHERE!!!!
    Thanks for your help!

    Yes that is correct however due to use of Solaris 10 MPxIO multipathing software that we are using with the Hitachi SAN it does present an extra layer of complexity and issues with ASM configuration. Which means that ASM may get confused when it attempts to find the new LUNs from the Hitachi SAN at the Solaris OS level. Oracle Metalink note 396015.1 states this issue.
    So my question is this: how to configure the ASM instance initialization parameter asm_diskstring to recognize the new Hitachi LUNs presented to the Solaris 10 host?
    Lets say that I have the following new LUNs:
    /dev/rdsk/c7t1d1s6
    /dev/rdsk/c7t1d2s6
    /dev/rdsk/c7t1d3s6
    /dev/rdsk/c7t1d4s6
    Would I set the ASM initialization parameter for asm_diskstring to /dev/rdsk/c7t1d*s6
    as correct setting so that the ASM instance recognizes my new Hitachi LUNs? Solaris needs to map these LUNs using pseudo devices in the Solaris OS for ASM to recognize the new disks.
    How would I set this up in Solaris 10 with Sun multipathing (MPxIO) and Oracle 10g RAC ASM?
    I want to get this right to avoid the dreaded ORA-15072 errors when creating a diskgroup with external redundancy for the Oracle 10g RAC ASM installation process.

  • Install Oracle 11i Suite and Oracle 10g on same Server

    Hi
    We are an Educational firm planning to launching Oracle 11i and 10g.
    Can I install both the Oracle 11i E-Business Suite and Oracle 10g on the same Server? If it can What is best configuration for the Server that can I bought?
    provide Configuration too.
    thanks

    "However, I do not suggest any windows platform for 11i as that is not so good os for 11i. You may either go far unix or linux" - 140042
    That's absolutely right. It is better to have at least two linux/unix machines:
    # 1 machine for application server - admin, web, form, concurrent services
    # 2 machine for DB server
    If you want, you may integrate Oracle apps 11.5.10 (on #1 and # machines) with OracleAS 10g (# machine).

  • Configring and instaling 10g RAC on two Nods win 2003 Local Area

    All Experts
    I want to configure and instal 10g RAC using three database server on difirent network groups (Head office , processing, stitching). i am unable to configure ip etc. ip address is as:
    work group ip address computer name
    HO 192.168.0.29 maindb
    processing 192.168.1.92 procdb
    stitching 192.168.1.92 stichdb
    Please guide how i can configure and user hosts file in windows\system32\drivers\etc\hosts
    Thanks in advance

    Thanks
    i have three server with same subnet mask. save os and db versiong windows server 2003 and 10g on all servers.
    server-1
    ip address : 192.168.0.29
    ubnet mask : 255.255.254.0
    computer name : maindb
    server-2
    ip address : 192.168.0.92
    ubnet mask : 255.255.254.0
    computer name : procdb
    server-3
    ip address : 192.168.0.93
    ubnet mask : 255.255.254.0
    computer name : stitchdb
    Please guide me how i can configure system32\dirvers\etc\hosts file.
    Thanks in advance.

  • Forms 6i and developer 10g on the same machine

    Can i have forms 6i and developer 10g on the same machine

    Jacob,
    Were you installing any patches to the Forms 6i?? I think your problem was a mix up in the environmental variables.
    multiple versions of the same Oracle product CAN* be installed successfully on the same machine, it has been done by many.
    Do not generalize one experience, since you are working on VMware, try them on one, it's easy to revert to a snapshot ;)
    Install Forms 6i first patch it configure it and restart your machine and install DS 10g, On this machine I have Forms 6i and DS 10g installed at this same moment, and it's been working fine for that last 2 years.
    Tony

  • How to upgrade froms and reports 10g to froms,Repor 11g on weblogic server

    I need to setup a test environment to upgrade Oracle Developer Suite (Forms and Reports 10g) and Oracle BI (Discover) to weblogic. We are using Oracle 10g.
    What software I need to install and and in which order? Help will be highly appreciated. Thanks

    Hi,
    You can find many articles on oracle site for this subject.
    However in brief following are the steps
    1) Create a directory source,executables,images,reports and logfiles.
    2) Copy all your forms, menus and pll's in source directory
    3) All your images in your image directory
    4) All your reports in reports directory
    5) All yuor fmx,mmx and plx in executables directory
    6) Any log files in logfiles directory
    7) Add path of images and executables directory in FORMS_PATH in default.env
    8) Configure your formsweb.cfg as your need.
    9) Configure report.conf and rwservlet.properties according to your applications.
    10) Make jar of icons say myicons.jar.
    11) copy myicons.jar in forms/java directory
    12) Check yuor form services if they are running or not.
    13) Invoke the URL in internet explorer
    http://<ip_address>:<port_no>/forms/frmservlet?form=testform.fmx
    I think that's enough from my side.. For more info you can go through the documentation.
    Regards
    Anuj

  • How to install oracle Forms and Report 10g in windows XP OS

    How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
    It is working good.
    please help me this issue.
    please give the steps..............
    Thanks
    Rajeev

    Hello Frank,
    for development, you need to install Oracle Developer
    Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
    What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
    Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
    Best regards,

Maybe you are looking for