Configuration of Pre-selected tab of the Room Directory

Hi,
It appears from SAP Help that it is possible to preselect the tab of the collaboration Room Directory iview to display, as well as to define what room types to display under each type using the iview property 'Pre-selected tab of the room directory' as described in http://help.sap.com/saphelp_nw04/helpdata/en/08/01b341800e3231e10000000a155106/frameset.htm
I have tried entering the value 'ALLROOMS{restricted,public} into the above value, but I do not see public rooms being listed in the resultant room directory iview. Does anyone have experience with this?
Thanks,
Ju

Hi Ju,
> the restricted and public rooms appear
> in the respective tabs
Then it's not a TREX indexing problem.
> Do you have any links with regards to this? thanks
See http://help.sap.com/saphelp_nw04/helpdata/en/ff/1a9442062bcd6ae10000000a155106/frameset.htm for details.
From the rest of your description, it sounds like an implementation bug; anyhow, this does not seem to appear on KMC SPS14. If your are on an older version, consider to upgrade your installation.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

Similar Messages

Scenario selection in Template Selection tab of the Scope of a project

Hi All
I've just installed SolMan 7.0 EhP 1 and am creating a new project (with transaction SOLAR_PROJECT_ADMIN). In the Scope tab, under the Template Selection I can only find 1 Scenario to choose.
Under "Select one or more Scenarios", there is only the selection SISE_BC - Simplified Solution Manager Basic Configuration, that has 1 check box for the selection Basic SAP Solution Manager Configuration.
I was informed by a PM that there should be many more to select from. That I must have missed something in the set up.
My question is, How do I bring in all of the Scenario selections to choose from?
Ken

Hi
I think you need to map the scenario from BPR which comprises of all SAP standard scenarios or best practices
which can be done as shown below
https://websmp110.sap-ag.de/~sapdownload/011000358700002006042008E/HowTo_Impl_Bus_Proc.pdf
Hope prb solvd
regards
prakhar

UCCX Pre-Select Agent prompt the Agent's ID

Hi All,
I'am Testing UCCX 7.0, and create the script like ICD script. If use 'Connect' or 'Select Resource' UCCX will find the Agent
direct. We wanna kwon how to insert a prompt, prompt the Agent's ID to customer before agent pickup the phone.

The Select Resource step will only produce a User object.
I made an assumption that you would be able to convert the User object to a string.
You would use the ?.getId() method on the User Object to get the username of the User.
Of course, your AD team could have user id's setup as numbers instead of names. But regardless, this will still work.
Additionally, I don't know why I didn't mention this originally, but there is a builtin process for assigning prompts to Agents, and it's managed with the spoken name upload script. If you were to use that feature, then you would get the Agent's recording (their spoken name, or whatever they choose to record) via the Get User Info step. And because the Get User Info step requires a User Object, and your Select Resource Step produces a User Object, you should be good to go.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Room Directory iview problem

Hello,
I am in to NW04s EP SP10.
In my Room directory iview, I am not able to see all the rooms that i have created under each tab(my room, Restricted, public).For example, I have created 15 rooms under restricted category. But I am able to see only 10 rooms under the Restricted rooms tab in the room directory iview.There is no option to navigate to see the remaining 5 rooms.
Is there any way to show all the rooms under each tab or to provide next page navigation if it exceeds 10.
Thanks in advance,
Siva
Helpful answer will be rewarded.

Hi Siva,
I got the below information from SAP Note - 877937.
Following are the steps for getting pager link:
Missing pager in Room Directory when there are more rooms than the number listed on each page:
To keep the current settings (TREX is used/not used for room search), follow this description:
Go to System Configuration -> Knowledge Management -> Content Management -> User Interface -> Settings -> Collection Renderer Settings -> Collection List Renderer.
If TREX search is used: Set the value 'this,RoomPager(alignCenter)' for the property components in every CollectionListRenderer of the LayoutSet Roomdirectory in the Collection Renderers listed below.
If TREX search is NOT used: Remove the value 'this,RoomPager(alignCenter)' for the property components in every CollectionListRenderer of the LayoutSet Roomdirectory in the Collection Renderers listed below.
Collection Renderers:
AllRoomsTabCollectionListRenderer,
AllRoomsTabNarrowCollectionListRenderer,
CommunitiesTabCollectionListRenderer,
CommunitiesTabNarrowCollectionListRenderer,
MyRoomsTabCollectionListRenderer,
MyRoomsTabNarrowCollectionListRenderer
Do the above settings and will get the pager link.
For more details, see note 877937
Note: Please award the points for helpful answers
Regards
Vasu

How To Add InfoObject in the Data Selection Tab of InfoPackages in 2004s

Hi Y'all!
I would like to ask how to add an infoobject in the Data Selection Tab of the InfoPackage in 2004s. It says its optional, this definintion of selection criteria for the infopackage.
My apologies, I don't understand how this is done. Surely, I would like, however, to understand how to add an infoobject in this data selection Tab of the InfoPackage in 2004s.
Can any kind soul out there (gurus) please lend me your thoughts?
Regards,
Philips

Hello Rajani!
Thank you very mcuh for that! I super appreciate it! Can you prescribe how I can do this step by step please? Where exactly in the DS can I locate this "field for selection" option in the DataSource?
Regards!
Philips

Want to change the Background Color of Selected Tab

Hi All,
I want to change the Background Color of Selected Tab of the tabstrip visible in Content Admin Role (Browse, Overview etc.).
I have changed the Background Color of Selected Tab - Tabstrips-Complex Elements through Theme Editor, but that did not take effect.
Only the other webdynpro components tabstrips took effect.
Regards,
Vishal

Hi Andre,
I don't know if you have already figured out how to change the background color of the tabstrip, but I will explain how we have done it.
You might have tried to change the background color in "Tabstrip" (under the menu "Complex Elements") in Theme Editor. When you change the property "Background color of selected/unselected tabs", this will not change the color of the images on the tabstrip (ex. the triangle on the side of the tab). These images are on the server. We copied these images and then made changes to them, before we uploaded them again through the Theme Editor.
The path to find the images is /usr/sap/~/JC01/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/portalapps/com.sap.design.urdesigndata/themes/portal/the name of your theme/common/tablist
If this didn't work for you, you might have to change the properties in "Pattern Containers" (under Complex Elements") in Theme Editor. The tablist properties are under the header "Tab Container".
I think it should work for you then. We also found that there was some problems when we tried to view the changes in Firefox, but haven't figured out how to solve this.
/Ellen

Recovering the selected tab of a TabStrip UI Control

Hi forum:
Hi have a trabStrip control with some diferents id´s in their tabs and also onSelect action of this tabstrip i want to recover the id of the selected tab, but the selected tab can be only recover from the wdDoModifyView , how can i do this, if the wdDoModifyView is static and my onSelect method is non-static?
Thnks
Joshua

Hi Josue,
you can simply map tabstrip "selectedTab" property to context atribiute and use it enywhere you want:) (b.e. in onSelect event handler)
Regards Bogdan

Unable to change date selections in data selection tab

Hi experts,
I'm new here, i scheduled the init load with date selections in the data selection tab, i successfully loaded the data and now i want to go for the delta but i'm unable to delete the date selection in the data selection tab. what problem is this.
can we load the data with the same selections in delta update ? how can we delete the date selections
orelse nothing happens even if there is a selection in the data selection tab? the date is a past one.
help me out plz
regards

delta loads copy the selections from the init load.
Often while scheduling delta loads u will see a message 'selections copied from the last init load'.
cheers,
Vishvesh
Message was edited by: Vishvesh

Adding a field in data selection tab of Info Package

Hello,
how can I add a field for selection in the data selection tab of the info-package in BW 3.5.
Thanks,
SD

Hi,
You need check Selection in RSO2 in ECC then that field is available for Selectgion in InfoPackage.
Here I'm giving 0CUST_SALES_ATTR DataSource Example for Selection Change, so see the logic and accordingly you can change your DataSource Selections.
See the properties of that field in RSA2 in ECC and you can also make it for selection, use the following program and see it.
In ROOSFIELD table give the datasource 0CUST_SALES_ATTR and see , select only Active version Fields.
For the following fields you can find FIELD = X, it indecates that it is abailable for selections, so in this way you try to do it by using following program and check.
KUNNR
SPART
VKORG
VTWEG
REPORT ZBI_ROOSFIELD NO STANDARD PAGE HEADING .
tables ROOSFIELD.
Update ROOSFIELD set SELECTION = 'X' where
OLTPSOURCE = '0CUST_SALES_ATTR' and
FIELD = 'FAKSD '.
Also see SAP Note : 1033847
Re: Field Selection in Datasource 0CUST_SALES_ATTR
Thanks
Reddy

Selection condition in the infopackage for initializing delta

How does the selection condition in the infopackage help in initializing delta?

Hi,
You can enter multiple single valus for any field in the infopackage. Just select the row for material type and then click on the insert duplicate button ( + sign ) which is at the bottom letf hand side in the 'Data Selection' tab within the infopackage. You will usually find this 'insert duplicate' icon next to the 'Check' push button.
You can insert as many rows as you want for material type by select the material type rown and clicking on this icon. You can then enter the three values in the three rows for material type.
Regards,
Shilpa

Pre-selected button

I need to know how to make my a button pre-selected. When the
user comes to the screen, I'd like it to show up just like it does
in the rollover state. Is there a way to do this? I already tried
using the my_btn.selected property, but that does't do it (didn't
think it would).
Similar issue: I have three buttons in a movieclip, and I'd
like them to be the only items the user can choose from and
navigate to, I haven't figured that one out yet either. If anyone
knows how to do that, please tell me, I'd like to be able to tell
which items have the "focus" similar to the getFocus() method used
for text fields, is there anything like that for movieclips

If you want to hide a radio button from a group, you have to use individual IWDRadioButton elements instead of IWDRadioButtonGroupBy{Index, Key}.
Armin

Need button so be pre-selected

I need to know how to make my a button pre-selected. When the
user comes to the screen, I'd like it to show up just like it does
in the rollover state. Is there a way to do this? I already tried
using the my_btn.selected property, but that does't do it (didn't
think it would).
Similar issue: I have three buttons in a movieclip, and I'd
like them to be the only items the user can choose from and
navigate to, I haven't figured that one out yet either. If anyone
knows how to do that, please tell me, I'd like to be able to tell
which items have the "focus" similar to the getFocus() method used
for text fields, is there anything like that for movieclips

Solved.
My final code:
data: lv_tree_size TYPE i,
            ls_layout_item TYPE lvc_s_laci,
            lt_layout_item TYPE lvc_t_laci,
            lv_ind TYPE LVC_INDEX.
      CLEAR ls_layout_item.
      ls_layout_item-fieldname = 'SEL'.
      ls_layout_item-class = cl_gui_column_tree=>item_class_checkbox.
      ls_layout_item-editable = 'X'.
      ls_layout_item-u_class = 'X'.
      ls_layout_item-u_editable = 'X'.
      ls_layout_item-u_chosen = 'X'.
      ls_layout_item-chosen = 'X'.
      append ls_layout_item to lt_layout_item.
call method g_tree9001->set_table_for_first_display
      EXPORTING
        i_save              = 'A'
        is_variant          = ls_variant
      CHANGING
        it_sort             = gt_sort9001
        it_outtab           = gt_tree9001
        it_fieldcatalog     = gt_treefcat9001.
DESCRIBE TABLE gt_tree9001 LINES lv_tree_size.
DO lv_tree_size TIMES.
        CALL METHOD G_TREE9001->CHANGE_LAYOUT
          EXPORTING
            I_OUTTAB_INDEX = sy-index
            IT_ITEM_LAYOUT = lt_layout_item                .
ENDDO.
The main trick is in u_class, u_editable, u_chosen. These params say that layout should be changed. Only this way it will work.
And some helpful links:
ALV tree get selected checkbox
Checkbox ALV Tree CL_GUI_ALV_TREE
ALV TREE-Checkbox
CL_GUI_ALV_TREE and Checkboxes
Report BCALV_TREE_ITEMLAYOUT is also very helpful.

Can't find 0FYTLFP OLAP Variable in InfoPackage Data Selection tab on 3.5

On BW 3.5, when generating an InfoPackage with the datasource as Purchasing Data(80PUR_C01), under Data Selection tab, for the InfoObject 0FISCPER, I selected 7 (OLAP variables)for the Type column, then click the button next to it and under the column of Details for Type to bring up a window, but when expending the OLAP Variable field list, can't find the following value in the list which shows up on BW 3.1:
0FYTLFP     0FISCPER Cumulated to Last Fiscal Year/Period (SAP Exit)
How to make the above value show up in the OLAP Variable list?   I thought maybe the variable 0FYTLFP needs to be installed in Business Contents, but there is no variable object type in Business Content. It sounds like a SAP Exit, but how to make the SAP Exit value show up on BW 3.5?
Thanks for everyone's input!

hey Rohit,
Besides the three variable values in the list on BW 3.5, now I find a new one in the list, called "0E_ROLE     0SR_ROLE     Role (SAP Exit)", I have no idea why this one shows up now. Now all the four variables in the list are:
1. 0CML12LM     0CALMONTH     Last 12 Months Excluding the Current Month
2. 0CMONTH     0CALMONTH     Current Calendar Month
3. 0E_ROLE     0SR_ROLE     Role (SAP Exit)
4. 0S_RQMRC     0REQUID     Most Current Data
0FYTLFP is still not in the list!   We can't try to create BEx query since our BW 3.5 system is just installed and we have not got to the step to ceate a query. I try the 2nd way you suggested by pressing F6 on this variable with the typed in value 0FYTLFP, get the following msg "BEx variable 0FYTLFP could not be evaluated - No error message", that means it would not work on BEx query as well, right?
What could be the reason that we can't see 0FYTLFP variable in our new installed BW 3.5? Do you think our BASIS missed installing sth?
Thanks
Message was edited by: Kevin Smith

Selection TAB in ODS and Cube

Hi Friends,
I see Selection TAB in the manage TAB of ODS and Cube, what is the difference of this TAB in cube and ODS??
Is this selection criteria we give in the Data Selection TAB of Infopackage for that particular data target??
Thanks in advance,

This is to be used when you have to selectively delete data from the ODS. For example lets say you've realized that the data is being loaded incorrectly into the ODS from some time (past 3 months). But not all the data is incorrect but only for a few customer numbers (as an example). In this case, you use this selective deletion and give the customer numbers which have incorrect data and delete these records. After deletion and fixing the root cause, you can reload to the ODS using the same selections in the infopackage (mark the request as full repair if you have deltas going into the ODS at the same time). Hope this helps.

How to Pre-select Value in auto drop down list

Hi,
I have an automatically populated drop down list, and I'm trying to have it display with a pre-selected value (in the example 5). I didn't know where to start, so I modified the Dreamweaver code for "Set value equal to" from the Dynamic list function.The list displays, but the value defaults to 0. What am I missing?
<?php
echo '<select name="firstnumber" id="number">';
for ($j=0; $j<11; $j+=1)
echo "<option value=\"$j\" <?php if (!(strcmp(\"$j\",5))) {echo \"selected=\"selected\"\";} ?>$j</option>\n";
echo '</select>';
?>
Thanks,
Tim

The problem is that you have nested PHP tags inside a PHP block. You can't do that. In fact, it's surprising that the code works at all. Normally, nesting PHP tags inside a PHP code block will trigger a syntax error.
Also, your code is very difficult to read because of the way you use double quotes all the time. It's best to use single quotes for strings, except when you need to display the value of a variable inside a string. You can also nest double quotes inside a single-quoted string and vice versa, making for code that's much easier to read without all the backslashes.
This is how I have rewritten your code:
<select name="firstnumber" id="number">
<?php
for ($j=0; $j<11; $j+=1) {
echo "<option value='$j'";
if (!(strcmp($j,5))) {
echo 'selected="selected"';
echo ">$j</option>\n";
?>
</select>

Configuration of Pre-selected tab of the Room Directory

Similar Messages

Maybe you are looking for