Configuration of processes on R/3 side

Presently using version 4.7 of R/3 which was linked to CRM system through ALE. CRM server is down since long time. But business processes like sale order / Customer creation which were scheduled with R/3 transactions are getting triggered as soon as a transaction takes place on R/3 side.
These transactions are not getting cleared and outbound queques is getting accumulated day by day which is affecting the performance of Live system also.
Not able to identify where these automated processes are defined/configured on R/3 side. Can anybody pls help in identifying the root cause so that I can stop these automated processes.
Thanks in advance.
anu

Hi You can stop data flow to CRM to continue u r business on r3 side
this you can achieve in 2 types one physical method by disconnecting the Adapter
Plug in connected to CRM server and deactivation of Bridge, when yiou want to
Message flow > Display generic Synchronization Bridge configuration
you can choose either of the methods and continue with u r R3 side business Process.
Venkat

Similar Messages

How to configure quality process with batch management.

Dear Friends,
we have a scenario,our client receive goods with 101movement type into quality inspection stock.
once stock is passed quality check stock,then we will take into unrestricted stock with 321 movement type.
failed in quality test will be rejected.please give me suggestion how to map the scenario.while i am testing
the process in my sandbox,its asking batch number.its not allowing me to post unrestricted stock with 321
movement type.how to make batch as optional in this scenario?if batch is mainted for the material,how to
configure the process.we are not using QM module.
please suggest me.
Regards,
Varun

In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun

Oracle db 11g r2 Configuration of processes and session

I recently installed Oracle DB 11g R2 and 50,000 users connect to this database suggest me what would be basic configurations .
Processes and sessions parameters for database are 5000 and 5505 but it is little lagging now so if its possible i want to make it maximum of processes and sessions or automatic .

50,000 users getting connected concurrently? How many users/sessions remain active at any given point of time?
For such high userbase/sessions better to go with share server configuration, since I cannot assume that even 10% of the users will be active at any given point of time so better to use shared servers and dispatchers.

Configure server process

Dear All,
We are in the process of upgrading oracle applciation r11.5.10.2 to r 12.1.3 , 12.1 upgrade is about to complete,
a) can I upgrade to R12.1.3 with all latest RPC and patch fixes, and then configure "Configure and start server processes using rapidwiz"?. or I have to do this after upgrading to R12.1.1
b) in the above scenario, if I configure server process after upgrade to r12.1.3, then can I upgrade OAS to 10.1.3.5 later ?
c) Do I have to run rapid wiz (configure server process) as root user or app tier user?
Please advise

a) can I upgrade to R12.1.3 with all latest RPC and patch fixes, and then configure "Configure and start server processes using rapidwiz"?. or I have to do this after upgrading to R12.1.1
You have to apply those patches after you configure and start the server processes.
b) in the above scenario, if I configure server process after upgrade to r12.1.3, then can I upgrade OAS to 10.1.3.5 later ?
Yes.
c) Do I have to run rapid wiz (configure server process) as root user or app tier user?
As root user if you are using (applmgr and oracle) users to maintain the application and database tier node files. If only one user maintains all application/database tier nodes files then run Rapid Install as that user -- Just run Rapid Install as you did when you had to lay down R12 software.
Thanks,
Hussein

How to configure server process in sld add server in configtool

hi friends
i have added the server process in configtool after restaring the server sld server is stoped it not staring and it gives a messge that configur server process in sld adiminstration
can any one help how to configure the server in sld ?
and what are ther prerequesties that i need to take when i am adding sever proces in configtool and how many server proces i can add in the java engin
after incersing server proces how to configur in sld ?
regards
raja

hi janu
thanks for responding
i know how to configur was abap and was java in sld. i have issue when i add 2 server process in configtool , sld server is stoped there it is giveing maintal profile in the sld administration. i would like to know what need to me manintatinge in sld this is my issue .
regards
raja

External Driver Configuration for Process Integration 7.10

Hello colleagues,
I need connection the External Driver Configuration for Process Integration 7.10. Where is the how to?? The PI is 7.10 and bbdd is Oracle.
Regards.

Hello Victor
You will easily find the answer to this by searching the forum. Use the search terms "jdbc driver 7.10".
Please search the forum first before opening a thread. If you don't find the answer then open a new thread.
Regards
Mark

Can I configure capture process of streams on physical standby

we have high oltp system that has dataguard setup with physical and logical. We are planning to build a datawarehouse and have streams setup for data feeding into the datawarehouse. Instead of taxing the primary, i was wondering if i could set up the physical standby as the source for my streams (basically configure the capture process on physical standby).
Appreciate your help in advance!
Thanks

Thanks for the reply Tekicora
This means then On the primary, I will have another destination that I send the archives to (In addition to Physical) that will be my source database for streams where I can configure capture process. if this understanding is right, then i have the following questions
1) Can i use cascaded standby to relieve my primary from having another log destination and use that database for the source
2) Do you know if PSB can be used as source in 11g? because we are planning to move to 11g soon.
Thanks
Smitha

How to configure returns process if ware house management is configured

hi,,
sap gurus,
how to configure returns process if ware house management
is configured.
bcz total ware house management is configured but
not with returns process
plz help me on this.
regards,
balajit
09990019711

In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun

MRP configuration and process

Dear MM Guru,
i have to configure and process MRP.
can anyone tell me the steps.
regards,
santosh jaiswal

Check the below Links
http://www.sap-img.com/pp010.htm
http://www.help.sap.com/printdocu/core/Print46c/en/data/pdf/MMCBPCBP/MMCBPCBP.pdf

How will i configure consignment process

how will i configure consignment process...

Hi,
Consignment Process
Scenario -
1. Client creates a consignment order for their distributor.
2. The consignment stock sits at the distributor location. The distributor sells some of this stock to end customer.
3. Client creates an issue order for this quantity, this order has end customer as the ship to as well as bill to parties.
4. When the goods are delivered against this order, the consignment stock is reduced.
5. Client then creates an invoice for the end customer.
SAP Solution -
1. Create Cosignment fill up order of type KB with distributor as sold-to, ship-to and bill-to and payer.
2. Create delivery for this order and do PGI, which shifts this stock to u2018customer consignment stocku201D (special stock w).
3. Assumption - the master data for the end customer exists in the system and has all mandatory partner functions defined.
4. Create a consignment issue order of type KE, which has sold-to as the distributor and ship-to, bill-to as the end customer.
5. Create delivery and do the PGI, which reduces the consignment stock.
6. Create invoice, which has the end customer as bill-to and the distributor as u2018payeru2019.
Assign Points if helpful.
Thanks and regards,
Naveen Dasari.

No Context configured to process this request

I am getting the following error when i start the apache Server. I have deployed inside the webapps folder. But when i check it from the browser it is saying the following error.Please tell me .
message No Context configured to process this request
description The server encountered an internal error (No Context configured to process this request) that prevented it from fulfilling this request.

post the name of the root folder of your web application (ie the topmost directory of your web application inside webApps) and what's the path you have specified in the browser to access your web application?
ram.

Configuration for Process order for Forms

Hi,
I want to develop a layout for Process Order.
Where we will do configure Print Program & Layout for Process Order like
what we do in NACE for SD&MM related layouts!
Will this Process Order supports both SAP Script & SMART Forms!
Can anybody clarify!
Thanks,
Deep.

Hi ,
In Process order transaction ,in output options declare the form name and output type. In TNAPR table in SE11 create on row with the above o/p type and form name. I think both forms will be possible.
Actually where ever script form possible means there you can create smartform also.
Thanks.
Suma.

Process Orchestration - Configuration Wizard "Process Integration and Orchestration Package" shows running

Hi SAP Gurus,
I have installed an SAP PO system and am running the Config Wizard from NWA. The functional unit I have selected from NWA is - "Process Integration and Orchestration Package". This functional unit has in turn selected few more functional units like AEX, SLD. The issue that I am facing is that the wizard does not appear for my inputs and it shows that the selected wizards are running. Please see attachment "config_wizard_running.jpeg"
I read some forums and found a thread where in it was mentioned how to stop the config wizard and restart it. http://scn.sap.com/thread/1422958
Even after restarting my server, the functional units are still showing as running in NWA --> Configuration --> Scenarios --> Configuration Wizard --> Functional Unit Configuration UI. Please see attachment "Config_wizard_stuck.jpeg"
I restarted the application as suggested in the post so that I could run Config Wizard again. But its now allowing me to start it as the status is Running.
Please suggest.
Regards,
Amit

Hi Dimitri,
Thanks a lot. I have resetted the functional units. This time the wizard comes up ok.
Regards,
Amit

1099 MISC configuration and processing

Hello,
Can someone please explain ( step by step) the configuration needed in order to:
1) first set up vendors as a "1099 vendor:
2) Configuration needed in order to create the electronic file to the IRS
3) Any transactions, programs, and tables involved
I don't need to know about the smart form or printing, as we have a company which does all that for us, but we have to provide the electrionic files.
We are currently moving our system to a 6.0 platform, and the 1099 process is very customized in the old system, so i would like to understand all of the standard functionality 6.0 offers to generate this file...
Thanks and will award points.
Edited by: farmerj3 on Feb 8, 2011 2:50 PM

Just checking one more time to see if anyone has any ideas. . . otherwise we may need to write a custom program to handle this.

Configure approval process in Appraisals - Performance Management

Hi Guys
I am trying to configure the approval process. After the final appraisal by the manager, the appraisal forms hould go to the manager of the manager (next level manager) for approval.
My queries:
1. Is the next level manager defined as further participant or part appraiser?
2. Where do we assign the next level manager? In PHAP_PREPARE? I don't see anyplace where I can do that.
I have done the following configuration:
1. At category level, selected Role 'Higher Manager'
2. At category level, in Status flow--> Person Authorized, selected Higher-Level Manager.
3. In the template, selected Higher Manager in Roles.
What am I missing here?
Regards
FS

Hi FS,
I am also facing the Performance Management Higher Level Manager Approval issue in my client. Will you be able to help me about this BADI: HRHAP00_DOC_DEF_DO. How did you impleted this BADI related to higher level manager and how did you configure in Status flow.
Please Provide technical details about the BADI and configuration about the status flow also.
Thanks in Advance.
-Abhi

Configuration of processes on R/3 side

Similar Messages

Maybe you are looking for