Configuration of R/3 role error

Hi all
I want to connect an external R/3 system(4.7*110) to XI3.0. According to the configuration documentation, I have already created the Technical System and Business System as well as their clients on the base of Integration Server.
The configuration on the R3 client , The SXMB_ADM->Configuration Data(Integration Engine) is
Role of Business System ：Application System
Corresponding Integ. Server :dest://NELSON_INTEGRATION_XI"
But a mistake is made when checking ,the error message is :
Current Configuration (local):
 Role of Business System: Application System
 Corresponding Integration Server:
 dest://NELSON_INTEGRATION_XI
System Landscape:
 No access to system landscape at present
Comparison of Current Configuration with System Landscape
ps:
 I have just config the rfc destination (NELSON_INTEGRATION_XI type H), and return code 500 at the sometime .
I've search topics, notes and sdn contents and found nothing on duplicate conversation ids . if anybody has any idea what could be causing this please let me know!
nelson.

Hi,
Go to R/3 Tcode : SLDAPICUST
and add the below details
aliesname : enter any name
Prim : check
hostname : servername (don't give ip address some time will problem better enter the server name only)
Port : J2EE Stackport
user : ente the super user name which has all authorization
and enter the password..
save ..now go to sxmb_adm there you check and find out the status..
Regards,
Venu.

Similar Messages

I am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found

i am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found.

"command not found" means ... there is no such thing.
Has the .rpm been installed?
http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#XEINL122

Integrated configuration (PI 7.1) throws error when do 'Test Configuration'

I am doing Proxy to Web Service (SOAP) sync scenario. We are using Integrated Configuration. After created integrated configuration and test this from (Tools --> Test Configuration) it throws the following error at the receiver agreement step.
Sender Agreement - Green
Receiver Determination - Green
Interface Determination - Green
Operation Mapping - Green
Receiver Agreement - Red.
Problem occurred in receiver agreement for sender -DR4400_D to receiver -ESRI,urn:AssetManagement.AddressManagementSearchCapabilitiesFromECC_Out: No standard agreement found for , DR4400_D, , ESRI, urn::AssetManagement, AddressManagementSearchCapabilitiesFromECC_Out

Test Configuration cannot be used to test Integrated Configuration Scenario.....refer my reply here:
Re: Integrated Configuration in PI7.1
Regards,
Abhishek.

Dependency is not configured in the schema resource Error (OSB)

Hi all,
I am using OSB(10gR3). I am using workshop IDE. I have copied few Xsds into a project. One schema which has an import throws an error
"dependency is not configured in the schema resource Error .Possible reason one or more import/include not set correctly."
Kindly help me in solving this error.
I am new to OSB,kindly share any good online resources I would be of great help for me.

"Edit References" button will appear on sbconsole. Upload it on sbconsole and you will be able to see the button.
If you open the XSD in the workshop (in design view), under "Directives" you will be able to see the imports. Click on any of them and in the "properties" tab below you would be able to see "Schema Location" (in General tab of properties). Click on browse button and it will ask whether you want to download it from a HTTP URL or want to refer from a existing workbench projects.
Regards,
Anuj

No Configuration on Server or Server Error

Hi All,
I have created a track for custom development in the NWDI system. I have added standard SCA files in the track.I am able to see this track in DTR perspective. But when I go to DC perspective and try to import configuration from the server. I am getting "No Configuration on Server or Server Error" .
Please help me out... It is urgent.
Regards,
Amit
Message was edited by:
Amit

Hi,
Thanks for the reply...
query #1
u could try stopping the firewall --> what does it mean..please clarify
query #2
restart the NWDS( developer studio), that we have done so many time but having the problem.
Do you mean NWDI server restart --> please clarify
Our lanscape:-
NWDI is runing on http://xyz.abc.com:54100 where SLD is runing on http://xyz.abc.com:52100 which is the central SLD and integrated into NWDI.
Does SLD is being used in DTR and DC, please clarify becuase SLD port 52100 is not accessible at this point of time.
Regards,
amit

Configuration could not be verified error when connect to Cox

Hi,
I'm trying to connect to Cox but keep getting the "configuration could not be verified" error. I can access my Cox account through web mail and I've retyped and retried my email address and password enough times to be confident that it's correct. I've also verified my account settings (incoming/outgoing server and ports) with Cox support, and I've checked the my firewall and antivirus settings (norton 360). No luck with anything.
I'd really appreciate any thoughts anyone has!
Thanks,
David

I should have added that my Cox connection has been set up several years now with no problems but suddenly quit working. I checked everything I know to check, including firewall settings, and finally deleted email account and tried to set it up again. Still getting the same error.

Mail Box Role error!

I'm currently trying to complete my installation of Microsoft Exchange server 2010 however when i try to add the client access and mailbox roles in maintenance mode i get the following mailbox role error
Summary: 3 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:02
Preparing Setup
Completed
Elapsed Time: 00:00:00
Mailbox Role
Failed
Error:
The following error was generated when "$error.Clear(); $name = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxUniqueName; $dispname = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxDisplayName;
$mbxs = @( get-mailbox -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1 ); if ( $mbxs.length -eq 0) { $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController); if($dbs.Length -ne 0) { $mbxUser = @(get-user -Filter
{name -eq $name} -IgnoreDefaultScope -ResultSize 1); if ($mbxUser.Length -ne 0) { enable-mailbox -Discovery -identity $mbxUser[0] -DisplayName $dispname -database $dbs[0].Identity; } } }" was run: "The property 'ExchangeVersion' is on a read-only
object and can't be modified.".
The property 'ExchangeVersion' is on a read-only object and can't be modified.
Elapsed Time: 00:00:01
Finalizing Setup
Cancelled
Someone PLEASE HELP ME :(

Hi,
I can't understand your concern, could you please explain the following sentence in more detail?
"however when i try to add the client access and mailbox roles in maintenance mode i get the following mailbox role error"
Do you install any Exchange server before?
Here is a related article, please check if it is applied to your case.
https://social.technet.microsoft.com/Forums/exchange/en-US/a525ea55-4b44-4689-b647-72e20cb6c42c/exchnage-2010?forum=exchange2010
Best regards,
Belinda Ma
TechNet Community Support

Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)

Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)

Hi, William
My question is if you can help me and support me to configure the Blink Pro App, I have a Mac Book Air, OS X 10.9.1.
hope for your answer

EMP System Configurator 11.1.2.1 Error

I am performing the first-time configuration of shared services
database Type: Oracle's Driver (Thin)
Server: supimicodb2
Port:1486
SID: hyptst
User Name: esstest
Pasword: XXXXXXX
and am getting a this error
Failed to navigate from RegistryWizardState: Error while initializing registry
and the databse user Id's
have the correct Roles and privileges
Create Session
Create View
Resouces
Please advise

What is the error in the configtool error log?
Have a look at:
Shared Services Database Configuration Error:Failed To Navigate From Registrywizardstate:Error While Initilizing Registry. (Doc ID 1156713.1)
Shared Services Database Configuration Fails Against Oracle Database (Doc ID 1229053.1)
Unable to Configure Shared Services After Unistalling and Reinstalling EPM 11.1.2 Error: "Failed to Navigate from RegistryWizardState: Error while initializing registry. see logs for more details." (Doc ID 1110665.1)
HTH-
Jasmine.

Testing Resume extractor is configured - I am getting following error.

To test the Resume Extractor configured, navigate to Set Up HRMS ->
Product Related ->Recruiting ->Vendor
click “Search” if it is configured.
Click the “Test” link to browse a resume/CV and click “Upload”.
After Press Upload button I am getting Following error.
Java Exception: java.lang.NoClassDefFoundError: org/apache/commons/codec/binary/Base64: during call of com.peoplesoft.hrms.hrs.base64Utils.base64Encode. (2,763) HRS_HROI.UTIL.Base64Wrapper.OnExecute Name:encode PCPC:251 Statement:6
Called from:HRS_HROI_RESUMEEXTRACT.UTIL.ResumeProcessing.OnExecute Name:uploadResume Statement:58
Called from:HRS_HROI_RESUMEEXTRACT.Services.ResumeExtract.OnExecute Name:buildTestpage Statement:89
Called from:HRS_HROI.Components.HRS_VENDOR_SETUP.OnExecute Name:FieldChange_HRS_TEST_LINK Statement:150
Called from:HRS_VENDOR_SETUP.GBL.HRS_VNDR_WRK.HRS_TEST_LINK.FieldChange Statement:2
Edited by: Silambarasan.K on Jul 4, 2011 6:12 PM

Now resume loaded,It's show following error now.
To test the Resume Extractor configured, navigate to Set Up HRMS ->
Product Related ->Recruiting ->Vendor
click “Search” if it is configured.
Click the “Test” link to browse a resume/CV and click “Upload”.
Now loaded Press Continue Button It's show new exception,
Fatal SQL error occurred. (2,125) HRS_HROI.UTIL.CoreCommunications.OnExecute Name:BuildTransactionLogXml PCPC:14843 Statement:289
Called from:HRS_HROI.UTIL.CoreCommunications.OnExecute Name:BuildTransactionLog Statement:167
Called from:HRS_HROI_RESUMEEXTRACT.Services.ResumeExtract.OnExecute Name:DoService Statement:14
Called from:HRS_HROI_RESUMEEXTRACT.Services.ResumeExtract.OnExecute Name:processTestPage Statement:119
Called from:HRS_HROI.Components.HRS_VENDOR_SETUP.OnExecute Name:FieldChange_HRS_TEST_SUBMIT Statement:159
C
A SQL error has occurred, review the SQL to determine the cause of the error.
Review the program for errors. If necessary, run a PeopleCode trace to determine the program that failed.

Integration Design/Configuration in IB Logon : Authorisation Error

Hi all,
we get the following error message when logging on to the Integration Builder:
"Authorization error. Unknown user name or incorrect passwords."
We installed the SDK versions 1.4.2_03 and 1.4.2_05 on our computer and have local Admin rights.
Has anyone already a similar problem and can us further help.
The user/password has been created in SU01 with all the roles outlined in the install document over 24 hours ago and is viewable in the J2EE Admin Tool.
The user XISUPER can run the SLD & RWB ok however.
Is there anything else we should be checking ?
Kind regards
Colin

Hi Fabrice,
We have a solution. Try it and it may work for you.
We had an issue where the short domain name was not being resolved correctly to the long domain name so this was the failure reason.
Try using the long domain name in the URL just by changing it and see if that works.
Then your admin guys need to see if the name can be resolved correctly.
The message you are getting is a completely bogus message by the way.
Fingers crossed.
Colin.

The dependency is not configured in schema resource. Error in OEPE

Hi all,
I am getting the following error when I try to import a schema from URL.
*"The dependency is not configured in schema resource. Possible reason one or more import/include is not set*
* correctly."*
If I copy the xsd into my project I am not getting any error. Can any one help on how to configure dependencies in OEPE ?
Thank you
Arun

Hi Arun,
Also in SB console we can refer xsds from other projects but again OEPE doesnt seem to support that we will have to make duplicate copies of the resources in each project.It is not like that if you are using OEPE then you can not refer resources from other projects. Just what you need to do is that give relative path of the resource which is there in the file system. It does not matter that to which project it belongs. Yes, now with OEPE, you have to do this manually.
Regards,
Anuj

Configuring Solution Manager: Alternative Role to SAP_ALL

This is a general question regarding configuring Solution Manager and note 834534. I am configuring Solution Manager 7.0 at a client site. The main components that I am configuring are on the Monitoring and Operations side; for example, System Monitoring, Service Desk, Issue Management, and Change Management for Maintenance Optimizer. CHaRM will follow later on. Additionally, the client would like to use the project side of Solution Manager.
When I took training for Solution Manager from SAP, the SAP instructor advised the class to have SAP_ALL when configuring Solution Manager The problem I am having is that the client will not issue me SAP_ALL in the Solution Manager instance, regardless of the recommendation in note 834534. I can understand the client's reluctance to issue SAP_ALL, even though Solution Manager is not a financial system in of itself, however, I have found that I am constantly having to ask for authorizations as I step through the wizards and the Scenario-specific settings. When I run into issues which require further investigation by running transactions to check certain settings that are not specifically tiedd to a wizard or scenario-specific setting transaction, I run into further delays as I ask for additional authorizations to troubleshoot issues.
We have implemented the roles and assigned them to my ID in Solution Manager as outlined by the SAP Solution Manager Security Guide to the fullest extent possible; and I have been issued "Basis Roles" that the client issues to their Basis team. Regardless of these actions, I still run into authorization issues.
My question is, apart from the SAP Solution Manager Security Guides recommendations (which does not mention SAP_ALL), is there a role being developed, or has been developed that can be assigned to the Solution Manager configurator in lieu of SAP_ALL (as per note 834534)? I would think that this issue has been raised before, particularly since many companies have implemented SOX controls and are skittish about issuing SAP_ALL.
Your feedback is most appreciated.

Thanks for the reply, Nesimi.
While I appreciate that you do not use SAP_ALL, is that the case when you are configuring a brand new, clean system? Are you using the Configuration Wizards with out SAP_ALL? I ask this because when I ran the first configuration wizard, one of the steps is to create a "configuration user", which creates a user with SAP_ALL. However, I cannot use that wizard generated user ID because it has the role SAP_ALL.
In general, I am operating on 3 sources of information that says I need SAP_ALL to configure the system (not necessarily to operate it):
1. An SAP Instructor for the Solution Manager Operations and Monitoring Class
2. The IMG Activity "Create Configuration User" documenation in SPRO
3. Note 834534
I will review the english version of the link http://help.sap.com/saphelp_smehp1/helpdata/de/40/8ac473d40943ddb23def12bdb33437/frameset.htm that you have thoughtfully provided.
With respect to note 123640, I am not sure if that solves my problem or answers the fundemental question that I have in that given the 3 sources I quoted above. It seems to me that SAP's approach in indicating clearly that they prefer that the configuration user should have SAP_ALL is flawed given today's corporate governence policies. Clearly this recommendation is only for the initial configuration, and SAP_ALL can be taken away and replaced by the roles and recommendations in the SolMan security guide; to maintain Solution Manager. But when it comes down to the question "what do you need to configure Solution Manager, because we won't give you SAP_ALL", I am hard pressed to give an answer despite literally spending hundreds of hours researching "documenation" which does not give clear cut answers. I think SAP needs to address this issue instead of taking the easy way out and saying you need "SAP_ALL" as illustrated in the 3 sources of readily available information cited above.

User Specific catalog UI configuration - Custom catalog user role

Hi all,
We need different user specific layout settings for each user. i have duplicated catalog user role for each user and maintained specific named search for that particular user in constraint. but when we want to configure specific layout for individual user. its not showing that catalog user in the catalog config UI for the layout configuration. please advice. if it shows that specific user then we would configure each specific user layout with individual look and feel ( like shopping lists, search fields, images, etc., ). thanks for your inputs.
Your help would be highly appreciated!!!!!!!!!!!!!

Hi Smartsoft General user,
I guess you are on SRM-MDM Catalog 3.0
We have the same business scenario as yours. Its working perfectly for us.
1. Donot copy Catalog User role. SRM-MDM UI Config only accepts users assigned under std Catalog User role. You dont need mutiple copies of Catalog user role, anyways it wont work.
2. Create multiple webservices for each Named search. Provide one User (like User1, User2...or your own created ones) and one Named Search as following parameters in each webservice.
 http://<your server:port>/SRM-MDM/SRM_MDM
username User<n>
password <password>
server <your server>
repositoryType M ( for Master ) S (for Slave) - Make sure you are pointing to right repo if you have master/slave
catalog <provide Repository name- make sure you are giving right repository name, I provided it wrong first time>
port <your port>
uilanguage SY-LANGU
datalanguage SY-LANGU
mask < keep blank if you want dynamic search>
namedsearch <Provide exact Named search name as you provided in Data Manager>
HOOK_URL
returntarget _parent
If you are creating 5 different Named searches, create 5 different webservice definitions as above.
3. Now for each Catalog user, you can perform separate search UI layout as you wish.
Let me know if this helps or have any questions. If this worked for me, we will make it work for you.
~Pravin

ADF: Configuration.createRootApplicationModule() generates bc4j.xcfg error

I am using JDeveloper 11.1.1.5 to create a web service which performs mathematical calculations based on a varying number of inputs. Some of the inputs serve as criteria for querying DB tables to obtain static numerical values. This static data is then plugged into a formula to produce the output of the service. My approach is to build an ADF application with 2 projects: a "service" project which contains a java-based web service created using the "Create Java Web Service From WSDL" wizard; a "model" project that consists of an Application Module and some read-only SQL query-based views as it's Data Model. Additionally, the AppModule.xml editing tool was used to generate an AppModuleImpl.java class and it's associated client interface classes. The intent is to instantiate the App Module from the service project and call a custom method to perform the required DB lookup. The code to do this looks as follows:
In service implementation class (com.util.formula.service.FormulaCalculationServiceImpl.calculateLicensingFee):
import com.sesac.formula.lkup.client.AppModuleClient; //generated by App Module Java Class wizard
import oracle.jbo.client.Configuration;
AppModuleClient lkup;
try {
lkup = (AppModuleClient)Configuration.createRootApplicationModule("com.util.formula.lkup.AppModule", "AppModuleLocal");
} catch (Exception e) {
e.printStackTrace();
The following exception is always thrown:
oracle.jbo.ConfigException: JBO-33001: Configuration file /com/util/formula/lkup/common/bc4j.xcfg is not found in the classpath.
     at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:467)
     at oracle.jbo.common.ampool.PoolMgr.loadConfiguration(PoolMgr.java:600)
     at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:526)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1505)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1482)
     at com.util.formula.service.FormulaCalculationServiceImpl.calculateLicensingFee(FormulaCalculationServiceImpl.java:28)
... more
The service project Properties -> Dependencies specifies a dependency on the model project. I have tried making the dependency on both the Build Output and on the BC_Common.jar generated by the model project - neither works. I have exploded the the .war generated for the service project and verified that bc4j.xcfg does indeed exist at the classpath location described in the error message. It also exists in the BC_Common.jar at the correct location.
I also tried the following alternative approach to instantiating the App Module:
import com.util.formula.model.client.AppModuleClient;
import oracle.adf.model.BindingContext;
import oracle.jbo.uicli.binding.JUApplication;
AppModuleClient lkup;
try {
BindingContext bc = oracle.adf.model.BindingContext.getCurrent();
JUApplication japp = (JUApplication)bc.getCurrentBindingsEntry().get("AppModuleDataControl");
lkup = (AppModuleClient)japp.getApplicationModule();
} catch (Exception e) {
e.printStackTrace();
In this case, BindingContext.getCurrent() returns null.
The same App Module that I'm unable to instantiate as above runs fine in Oracle Business Component Browser. I chose this approach because I have been using App Modules in the same development environment when they were directly bound to UI's and Service Interfaces with good success and I liked the features it provided. I've spent way too much time beating on this and searching every forum I could find. The example for using Configuration.createRootApplicationModule() came right out of Chapter 9, Section 10 of Oracle Fusion Middleware - Fusion Developer's Guide for Oracle Application Development Framework (11g Release 1). Any ideas would be greatly appreciated.
Thanks,
Tom

I guess you get a new connection this way. If you have an ApplicationModule you can get the internal connection this way    public Connection getCurrentConnection(ApplicationModule aApp)
        Statement st = null;
        try
            // create Dummy Statement to get the connection
            st = aApp.getDBTransaction().createStatement(0);
            return st.getConnection();
        catch (SQLException s)
           // Log some message here and do something
        finally
            // close statement
            if (st != null)
                try
                    st.close();
                catch (SQLException s2)
    }Timo

Configuration of R/3 role error

Similar Messages

Maybe you are looking for