Configuration of scot in ecc6.0
Hi all,
i have configured out going mails in sap with scot....but i am able send the mails...its throwing an error that "Cannot process message, no route from BS5VIJAY to [email protected]"
Thanks
vijay
Hi,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm">Check Here</a>
Regards
Umesh K
Similar Messages
-
Configuration for SCOT done but still the email not getting in outlook box
Hi experts,
I have done SCOT, SCIF, SU01, settings and configuration but still i cant send email from SAP to outlook,
please suggest me what i have to do. I all ways getting error _express mail cannot be send due to the
technical foult_ plz explaine me what i have to do.
Thanks,
RajeshHi Rajesh,
Port is not open that why you sap server is not able to communciate with mail server & that is why mail is not getting trigger from spa server to mail server.
Call you network guy and inform this that port 25 should be open from
Source :- you sap server ip address
destination :- mail server ip address.
Thanks
Anil -
Configuration without Solman to ECC6
Hi Experts
i want configure and integrate EP,BI,XI and BI to ECC6.0 is it possible or i should install first solman but i dont want SolutionManager
Regards
ChanduHi dear,
Is there any specific reason that you don't want to use solution manager...?? I believe the scenario which you said is possible....
cheers,
RC -
New GL configuration & end user presentation - ECC6-version
Hi,
In ECC6.0 version we need to have " New GL configuration & end user presentation "
Regds,
NiranjanNiranjan,
Please use this link to get all the required information.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/830e405c538f5ce10000000a155106/frameset.htm
Hope this helps you.
Rgds
manish -
SCOT Configuration for output format XLS in ECC6
Dear All,
Currently the ECC6 that I'm trying to configure the SCOT does not have a XLS format for Abap List, so I couldn't proceed with it.
Since the ECC6 only have standard output format. (HTM , PCL , PDF , TXT)
Is there anyway to add the output format for the XLS output format for SCOT configuration.
Thanks & Best Regards,
Rahim.Hi,
Please refer SAP note 1151258.
Thanks
Sunny -
Barcode configuration in ECC6.0
Dear Friends,
We have urgent client requirement to configure barcode functionality in ECC6.0 version. Please guide me technical and functional configuration need to configure the sytem.
Best RegardsHello Jaya,
Are you using Warehouse Management?
I think this url will help, it talks about the Barcode activation.
http://help.sap.com/saphelp_46c/helpdata/en/60/0691384ec60126e10000009b38f8cf/frameset.htm
Also, check with your hardware provider (RF device) on how to integrate with SAP.
Regards
Arif Mansuri -
CCMS Configuration in ECC6.0
Hi ,
how to configure CCMS monitoring for ECC6.0?
how to use RZ20 t-code?
Please Help.
Thanks,
MohitHi
You can find lot of documentation in the following link for configuration and working with CCMS.
https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
Also please check Note 939616 - CCMS auto-reactions: Help with troubleshooting
Note 429265 - CCMS monitor architecture: Central auto-reaction
Note 176492 - Automatic email when an alert occurs (RZ20)
SAP Note 939616 - CCMS auto-reactions: Help with Troubleshooting
Also, excellent SIM file guides at sdn
Setting Up your Central Monitoring [original link is broken]
Regards
Uday -
Configuring BI in ECC6.0
Hi All,
We have installed ECC6.0 in our company, and as you might be knowing it comes with inbuilt BI in NetWeaver stack ( we have only one application server) , so I would like to know how we configure the BI in ECC6.0.
Can anyone give me any standard SAP documents regarding this??
Regards,
ParthaNo how to guide.
But there are master guide and installation guide
The Master Guide - SAP ERP 6.0 provides important information about the installation sequence and the components to be installed. It links to all other documents that are required for the implementation of a specific scenario.
Download the latest version of this document here:
https://service.sap.com/~sapidb/011000358700000782642007E
Regards,
Sergio
From the Media List for SR1 or Media List for SR2, identify the media you need.
Using the appropriate guide for your operating system, database and technology, install any of the SAP NetWeaver 7.0 usage types. To get to the download page, follow the link Installation Guide - SAP NetWeaver 7.0 SR1 or Installation Guide - SAP NetWeaver 7.0 SR2. -
Scot configuration...Smtp
Hi friends,
there are 2 clients in our system in one of the client scot is configured and is working fine....
Now we need to configure the scot in the another client in the same system.. will this gona effect the previous client if not what all the steps need to be done to complete this configuration... smtp configuration..
please help me out in configuring smtp ..send me some blogs or documents
Regards
VijayDera Vijay,
Yes you got to configure the same in new client on the same server as SCOT configuration is client independent
Back to SCOT, the configuration of the SMTP should look like:
Mail Host: the Exchange server domain name (FQDN)
Mail port: 25
Code Page: what ever you need (like 4110 unicode UTF8)
in the supported address choose Internet then click on the SET button and include your company address like:@XXX.ac.in:)
In the SAP's user manager (SU01) the user need an email address to be able to send emails.
Regards,
Ashutosh -
Configure SCOT for Alertmails from XI System
Hello,
i configured my XI as described here:
The specified item was not found.
But the System send noh Mails.. so i think i have to configure the SCOT for this.. is this right?
I have never executed the SCOT.. what i have to configure here?
Thanks for your helpThanks.. but this did not help.. if you make a routing test.. the following message occurs:
Cannot process message, no route from BAYERSCB to MAILADRESS
Message no. XS826
Diagnosis
To continue processing, the system requires a valid route from sender BAYERSCB to recipient MAILADRESS(type INT).
System Response
The action was terminated.
Error occurred in SAP in SAPconnect
Procedure
If this error was generated within the SAP system by SAPconnect, you have the following options:
Create a route (i.e. assign a suitable address area, which covers the above address, to a node).
1. Check whether the route exists, but the node to which it is assigned is not in operation. If this is the case, change the route or put the node into operation.
2. Change the recipient address if it has been entered incorrectly.
If the error was detected outside of the SAP system, please read the operator's manual for your communication software or contact the manufacturer. -
How to send an external mail(PDF) through SCOT
Dear All,
We have a requirement to mail customer invoice converting the smartform into a PDF. All the neccesary configuration that needs to be done in NACE and SPRO transactions has been done.Now when we issue the output through an output type through transaction VF03, output is successfully issued.In SP02 also it shows the printing is successfully completed.
But when i want to want to check the display log aginst the
output type and billing doc issued it says dat the processing log dosnt exist.We have configured the SCOT transaction for sending external email but it doesnt send the mail and even doesnt show any request in waiting and as well as no errors so we are not being able to identify whether the configuration done is wrng which doesnt seem to be the case or is dere a problem with SCOT configuration.
Could any1 pls help me with the entire flow of configuring SCOT if possible with screenshots for sending external email . or if possible wat is the possible problem we are facing...
Awaiting ur reply shortly.
Thanks & Regards,
Lailu Philip.Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
wa_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
wa_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
wa_buffer TYPE string,"To convert from 132 to 255
Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZZZ_TEST1'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
i_reclist-rec_type = 'U'.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
1. Use the Medium 7 for sending mails instead of 1 (printout)
2. Maintain the Mail IDs for all vendors in Vendor Master(check the ADR6 table)
3. Do the settings for sendiing mails in SCOT and SOST tcodes with the help of Basis person
4.In NAce also use medium 7 instead of 1 (print)
5. In the application doc Po Me22 N also configure the output type with the medium 7 for the partner(vendor) and other sommunication method settings.
6. CHeck the print program, I think it will consider the Medium and set the communication type automatically. check it by keeping a break point if it is not working.
n the Smartform Functiona Module we get the Spool ID of the Smartform for the output
use that spool ID and convert to PDF format and send mail using the fun modules
CONVERT_ABAPSPOOLJOB_2_PDF
SO_NEW_DOCUMENT_ATT_SEND_API1
you have to write related code for these fun modules in the Smartform driver program itself
and ask your basis persons to configure the SCOT and SOST tcodes to send mails to Outside Consignee Maid Id's
REWARD POINTS IF HELPFUL
rewar points if helpful. -
Troubleshooting of CCMS Configuration in SAP-PI 7.1
Hi
I have configured the CCMS configuration in PI 7.1 My intention to raise the email alerts if anything goes wrong
I have done it using the below weblogs....
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3187. [original link is broken] [original link is broken] [original link is broken]
I have done the following steps in 000 client
1. activated the central Dispatching job
2. Configured the SCOT
3. created the RFC destination to target client (200 in my case ) .. as per note 0176492
4. Specified the parameters in CCMS_OnAlert_Email_V2 .Sender id existing user in 000 client.
Below are the parameters i have specified in Auto reaction method
SENDER- SAP*
RECIPIENT- mentioned mail address
RECIPIENT-TYPEID- U
Here i do have one doubt on sender id. do we need to specify the dialog user or does SAP* serve our purpose.?
I hope everything as per procedure and now i do see alerts in RZ20 t-code dnt get any email alerts
Can someone through some light on this.. and guide how to troubleshoot my configuration.
Thanks in Advance.
Regards,
DeepYou can use any dialog/system user, the user must have a valid e-mail address populated on the user master though.
Regards
Juan -
How to trigger a mail through ALERT CONFIGURATION??
Hi Folks,
I want to know how to trigger a mail through Alert Configuration?
I've read Help.SAP.com, but i am not clear where exactly the sender Email address to be given for sending a mail??
Pls reply..
Thanks in advance..
cheers
ram.Hi,
You need to maintain the email address in SU01 for the particular user Id. Also you need to configure transaction SCOT for this.
Regards,
Jai Shankar -
Hi Gurus
Can somebody send me informaton on how to configure e-mail output for a sales order/delivery document/invoice. I know how to do it for a printer but I want for e-mail.
My e-mail is: [email protected]
thanks all
SriniHi
If your SD output configuration is set up correctly, an e-mail from SAP using medium 5 should go through just fine via SAPconnect (transaction SCOT). When it works, the external recipient should receive an e-mail with a PDF attachment containing the form image, regardless of whether it has been created via SAPscript or Smart Forms. Depending on your output determination settings, this even can happen in the background, without any interaction with the SAP front end (e.g. for invoices created automatically by a batch job).
Typically, a failed send will be flagged in the message control table (NAST), and this table should be monitored closely. However, there are many reasons why a document hasn't gone through, and this can be the case with both outgoing faxes and e-mails from SAP. The solution to both is the same: After identifying the failed document, re-send it manually by going inside it in change mode and repeating the appropriate output. If an obsolete customer e-mail address was the culprit, a customer master change would also be required, along with an audit of any docs recently created for this customer.
If any underlying data has changed since initial issuance, a re-sent document may not appear identical to the (failed) original. Sometimes, as when address info has been corrected, this can be a good thing. After all, the new document is more accurate than the old one.
In other cases, such as when pricing info has changed, it might be a cause for serious concern. There are several ways to deal with this concern:
1) Limit the types of changes allowed on certain docs after creation
2) Set up a doc image archive via ArchiveLink and re-issue output from there instead of from the current doc; or
3) For highly sensitive docs, consider a more secure delivery method.
<b>sending smart form</b>
You didn't specify the nature of the form or print program, but I suspect we are discussing application-driven output.
In any case, I suggest you take a close look at the print program. If it is a standard one provided by SAP, it is quite possible that hooks already exist to send your Smart Form output via e-mail as a PDF attachment.
See for example the call to function 'LF_FM_NAME' in standard print program RLB_INVOICE. Notice the preceding call to function WFMC_PREPARE_SMART_FORM? This function does the heavy lifting for you; here, no additional work is needed in either the form or the print program. To generate e-mail output, the remaining work essentially is:
1) SD output configuration (e.g. mapping the relevant billing output type to transmission medium 5 - 'External send' - via the IMG)
2) SAPconnect configuration (txn SCOT -- there are several notes in the SAP Service Marketplace discussing this component, such as 152474 and 312690).
3) Setting up the sender and recipient e-mail addresses (e.g. sender = txn SU3 data; recipient = bill-to party's txn XD02 data).
Hopefully, the print program at issue has the hooks you need. If not, you may need to explore the possibility of (a) changing it, (b) cloning it and changing the cloned version, or (c) manipulating the values directly within the form itself via field-symbols (which may or may not work). Whichever approach you take, I wish you luck. -
Hello People,
I want to send Email from my SAP system for which i have configured my SCOT where i have given In routing test my recepient Address and type as INT.
In the Node Part i have select Check box Node in use.
Mail Host - localhost
Mail port - 25
Code Page - No conversion into other character set.
Selected check box of Internet and in settings
in the Address Area i have given one id to which i want to send the mail.
In the Default Domain i have given the id to which the mail has to be sent.
In SU01 also i have given the ID to which mail i has to send.
When i go to SO01 and try to send a mail, when i am checking in SOST it is showing as Message 816.
Message Cannot be transferred to node SMTP due to connection error (final)
Please help me how to succeed from here.
Waiting for your valuable answers.I am assuming you want to use the SMTP plug in. If yes, follow the settings are per this link http://help.sap.com/saphelp_nw70/helpdata/EN/c7/92e93ac678601be10000000a11402f/frameset.htm. I am assuming your SICF services are not activated yet and hence this issue.
KK
Maybe you are looking for
-
How can I have my data back?
My iphone4s had a bath a few weeks ago and I am going to receive a new one, but during this time my laptop, where I had all the data, died. Is there any chance to have my music , my messages etc back on my new iphone? Maybe with some support from app
-
Error importing text file into SQL Server when last column is null
Hello all. Happy holidays! I'm trying to import a text file into a SQL Server table, and I get the error below when it gets to a row (row 264) that has null in the last column. I'm guessing the null jumbles up the delimiters somehow. The nulls are no
-
How can I attach multiple filled-form PDFs to the same outgoing email on iPhone/iPad?
How can I attach multiple filled-form PDFs to the same outgoing email on iPhone/ iPad?
-
New T500 Grinding Noise from Hard Drive
My brand new T500 Hard Drive makes off and on very faint grinding noise. The grinding happens for 6 times and then goes away for 5-10 seconds and then happens again and so on. Is this normal or is my new hard drive defective, and should I ask Lenovo
-
Environment variable setting not working
Hi Frank, Iam reposting this requst to forms forum because i did~t get any response from report forum.Please help me frank. Iam facing a problem related to reports10g ids. database is 9i My basic requirement is ,i want to show a report out put in a B