Configuration of sound hardware and screen

Hello
I had to format the hard and I lost the drivers CD.
I have downloaded the audio drivers from http://www-307.ibm.com/pc/support/site.wss/MIGR-61506.html and installed it.
However, the sound hardwars does not seem to work.
The same happned when I tried to install drivers for Wireless hardware. (wireless connection only worked after I used Fujitsu Siemens drivers!!)
Any help?

did you install the drivers or simply unpack it? You have to install the drivers from your drivers folder under c:\ drive.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Default Sound Balance and Screen Brightness?

Recently my iBook G4 has been booting up with the screen brightness all the way down and the speaker balance all the way to the left. Did these settings somehow get set as the defaults? How do I change it back to normal so that I dont have to keep changing the settings every time I boot up?

There has been a bug in OSX in regards to sound balance for notebooks since 10.3.5 (IIRC). To fix it look for a free app called Balanced, that should correct the problem.
As for the screen brightness, I've never heard or seen anything like that.

Sound buzzing and screen crush

just got a Pavilion p6203uk for christmas. after its been running for about 30 mins it makes a buzz sound through the speakers and the com goes really slow for like 2 seconds at a time. this keeps happening for like 2-5mins then it stops. then the same thing happens about every 15 mins after. when i turn sound off the buzz noise stops but the computer still goes slow for the time. any suggestions?

Hello @izzy12,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues where your HP Pavilion p6203uk Desktop PC starts to lag and makes a buzzing sound. I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this I can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Xfce4: Problems with Sound and Screen Locking on ASUS G53S

Hello everyone,
I recently installed Arch for the first time, and decided to use xfce4 for my desktop environment. Everything seems to work well after I followed the instructions given in the wiki, except for the sound and screen-locking functionality. Regarding the sound, I made sure that my user account is added to the audio group, and installed the gstreamer1.0-base-plugins and gstreamer1.0-good-plugins packages. The xfce4-mixer applet starts up without any warnings and recognizes the available devices, but I am still not able to hear any sound. The "Lock Screen" applet simply does nothing upon being clicked. Do you have any ideas as to what I should try in order to fix these problems?
Thank you very much!

To be able to lock the screen you have to install and configure a screen locker or screen saver, e.g. xscreensaver, slock, i3lock, maybe combined with xautolock. When you use a screen locker and not xscreensaver, XFCE might not recognize it. Then create a symlink in /usr/local/bin/xflock4 or use a shellscript if you need to pass parameters.
My configuration: xautolock with i3lock. /usr/local/bin/xflock4 is this executable shellscript:
#!/bin/sh
xautolock -locknow
xautolock is started in the XFCE autostart with this commandline: xautolock -locker 'i3lock -d -i ~/Bilder/arch/arch-linux-lock.png'
PS: If you like i3lock and need user switching capabilities, I can give you a patch where Ctrl-S calls a custom command (gdmflexiserver by default)
Last edited by progandy (2012-06-17 14:19:12)

Alarm sound and screen freeze

I have a 13 inch MacBook pro running OSx lion, after around 2 hours intermittent alarm sounds and screen freezes with coloured checks, reboots ok but reoccurs, it has a ssd drive any suggestions?

I just had this happen. I just installed new memory. Did you install any new hardware.

Oracle hardware and storage solution configuration questions

Hi all,
I am configuring hardware and the storage solution for a project and am hoping to have some questions answered about using Oracle as the storage solution.
The current setup will have 2 Dell NX3100 NAS gateways each with dual quad core processors, 24GB of RAM, 12x2TB data disks, and running Windows Storage Server 2008 64bit as the OS.
Will also have direct attached storage of 2 Dell PowerVault MD1200 disk arrays, each disk array with 12 x 2Terabyte SAS disk drives giving a total of 36TB of storage space for each NAS Gateway.
Based on this information, is there any problem with two Oracle Standard Edition installation (1 per NAS) holding up to 36TB of data (mostly high res images) in this hardware configuration?
Does Oracle have a built in solution for replicating data between the 2 NAS heads and down to the disk arrays? Where the application sever will write to one of the NAS+disk arrays and then that data is written from the first NAS to the 2nd NAS+disk array? Currently I've used DoubleTake in other projects but am wondering if Oracle has something similar that is built in.
Finally, will Backup Exec Oracle agent work with this configuration for backing up the data to a Dell PowerVault ML6020 Tape backup device?
Thanks in advance for any insight.

Hi,
Does Oracle have a built in solution for replicating data between the 2 NAS heads and down to the disk arrays? Where the application sever will write to one of the NAS+disk arrays and then that data is written from the first NAS to the 2nd NAS+disk array? Currently I've used DoubleTake in other projects but am wondering if Oracle has something similar that is built in.NAS - I still doubt during the network issues (In case of RAC - all nodes would get afftected), I would not suggest certainly for this. Let the other experts reply back.
- Pavan Kumar N

My phone 4 some time music player sound coming and volume up and down not show screen .then some time sound coming.. why

my phone 4 some time music player sound coming and volume up and down not show screen .then some time sound coming.. why

Hello @voicewizard,
I understand that you are having audio issues with your audio having to ramp up before it hits the normal output range. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are numerous HP ENVY 810 All-In-One Desktop PC variations. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My Time Capsule's 5GHz network does not appear as a network any longer. Airport utility is 5.5.3 and iMAC is 10.7.1 The TC appears to be configured correctly in the utility screen.

My Time Capsule's, only the 5GHz network, does not appear as a network any longer. Airport utility is 5.5.3 and iMAC is 10.7.1 The TC appears to be configured correctly in the utility screen. This began sometime after upgrade to 10.7.1 however this does not explain why either of my iPAD's does not see the 5GHz network.

Wish some Apple folks would chime in...
Apple is not here. Even if they might rarely monitor these boards, they will not respond. We're all users, just like you.
Suggest that you open Macintosh HD > Applications > Utiltiies > AirPort Utility
Click Manual Setup
Click the Wireless tab below the icons
Click the Wireless Options button
Check one more time to see if you still have the 5 GHz Name option enabled. If not, enter a check mark and click Update to save the new settings.
If 5 GHz is enabled, temporarily disable the setting and Update. Then go back in and enable the setting again.
If you still cannot "see" the network from any device, about all that you can do at this point is reset the Time Capsule back to factory defaults and try the configuration again to see if it will "take". Lion is causing some strange issues, and this may be another.
If this is not successful, then it's time to contact Apple support or arrange a visit to an Apple store to let them take a look

I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black. MAY YOU HELP ME PLEASE???

I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black.
WHAT TO DO

carter87 wrote:
so i bought this Iphone 4 thats jail broken,
Return it.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
Security vulnerabilities: Jailbreaking your device eliminates security layers designed to protect your personal information and your iOS device. With this security removed from your iOS device, hackers may steal your personal information, damage your device, attack your network, or introduce malware, spyware or viruses.
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
... It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.

HT201302 I have Windows 7, but Hardware and Sound is not listed in my Control Panel. So, how do I transfer videos from my ipad to my computer?

I am trying to transfer videos that I've recorded with my ipod camera to my computer. The option to auto play does not pop up when I plug in my ipod, so I looked up how to do this manually. Apple support websites told me to go to Control Panel and then Hardware and Sound, but Hardware and Sound is not listed in my control panel options. What other options do I have? I own a Dell laptop and I have Windows 7.

Does the iPod show in My Computer? If so then go to My Computer>iPod>DCMI Folder and copy them from there to where you want them

Equium A210-171 Control Panel\Hardware and Sound Missing Realtek HD Audio

Hi,
I was doing some updates the other night and went into msconfig,
I think i clicked hide all microsoft services and then disabled everything or most of not sure.
But usually when i go to Control Panel\Hardware and Sound i can see a tab to realtek hd audio
When i click that i get another control panel/window where i have some options to change sound
Like i had a few options where i could select to use effects like Hall, Disco, party etc
Also installed realtek AC 97, not sure if that was needed, i cant see the realtek folders in program files though.
It has another option to fix loudness which is handy to give volume a small boost.
Could anyone tell me how to get realtek back in Control Panel\Hardware and Sound
Thanks in advance

I managed to fix it by uninstalling it from add/remove programs and then i found the drivers for my os
Yes btw i still have the os that it came with and she runs great for a laptop i bought in 2007
Toshiba will definitely be my next purchase though :)

Should my Computer shows as a device on the Control Panel\Hardware and Sound\Devices and Printers.

Should my Computer shows as a device on the Control Panel\Hardware and Sound\Devices and Printers.
Should it? I have an HP p6653w w/ a c7280 all-in-one printer.
My computer is showing as a device with 'trouble' and it says it has NO driver for it.
What would happened if I removed that device? Would I again lose the ability to print ??

Do you have Windows 7? If so it is normal for the computer to show up in the "Devices" list. I would suggest you do not delete it.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

ADF Webcenter Portal Deployment System Hardware and Software configurations

HI All,
Anyone please help me to sort out this issue.
I need to have the production System requirements of Hardware and Software.
Please let me know.
Thanks / Balaji.

Hi.
Do you need High Avaiability in your environment?
Are you planning work with Spaces or Portal?.
A typical architecture consists in a cluster of two machines por HA.
About your response/users requirement I think that next settings will be OK (approach):
- Each WC_SpacesX node 4g or 6g
- Each UCM_Server 2g
- Each WC_CollaboratrionX 1g
- If don't use Portlets, Analytics and others you can maintain shutdown these servers.
Approximatelly you'll consume 23GB RAM with all components working (Analytics also, portlets... also).
For performance and good response of pages don't forget next tips:
- WebTier OHS installed with DEFLATE module enabled. It reduces too much static files loaded in WebCenter like CSS, JS and Images.
- Put your custom images in OHS instead of inside of WebCenter platform.
- Don't install WebCache. It's not useful for WebCenter.
- Configure JoC (Java Object Cache) for cluster caching.
Remember that this information it's only an approach based on my experience, you've to investigate and work with Oracle to decide the best apporach for your requirements.
Regards.

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through itunes, but the sound is still absent, and still problem with sound an

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.

Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Can a sound card be configured to both output and input audio?

I am building a radio tester and would like to output a 1 kHz tone from the laptop's sound card, and then after its been through the radios, input the audio signal again and carry out a SINAD measurement on it. I can get the VI's to carry out each operation separately (that is, get one to produce and output a 1 kHz tone, and the other to read an input audio signal and produce a SINAD measurement), but I can't get the two to work together as required.
I think the problem is to do with the device number. In both VI's the device number is set as 0, so does this cause a problem when running them together. The tone is being generated fine, but but it appears that this is what the SINAD VI is measuring, not the input coming from the radio.
Does the device number refer to the sound card itself, and if so, is it possible to distinguish between the audio in and audio out ports?
Any help would be appreciated.

"bigdog" <[email protected]> wrote in message
news:[email protected]..
> Thanks unclebump,
> looks like I can't output audio and input audio on the same sound card at
the same time.  Can anyone confirm if that is the case, and if so,
suggest a way around the problem.  
> As you can probably tell I'm very much a novice when it comes to
Labview.  Any help will be gratefully received.
> BD
You certainly can - just look at your Windows Soundcard settings and play
with them for a bit. Are you using Line in and Line out? (speaker that is).
What I do is test them separately then together.You don't need two sound
cards by the way though you must inhibit line in so it doesn't play through
the speakers otherwise the input and output get mixed together.The otehr
problem you should have is that teh sine wave will sound as if it is
intermittant - there is a fix for this.
Tam

Configuration of sound hardware and screen

Similar Messages

Maybe you are looking for