Configuration of System
Dear Team,
Please excuse me if this is not relevant to post in this forum. But need your help sincerely
I am planning to invest to learn 11G RAC , Dataguard, e-bis suite and other advanced topics etc..For that planned to buy Laptop's to learn on my own
Please help me, i have seen my collagues after buying costlier configurations struggling with mother board and processors not supporting them during installation. I dont need to commit same mistakes
Only laptop in mind due to its easy portability and access..Can you give your suggestions on this...
Thank you,
Regards,
dkoracle
Hi,
I am planning to invest to learn 11G RAC , Dataguard, e-bis suite and other advanced topics etc..For that planned to buy Laptop's to learn on my own
Please help me, i have seen my collagues after buying costlier configurations struggling with mother board and processors not supporting them during installation. >I dont need to commit same mistakes
Only laptop in mind due to its easy portability and access..Can you give your suggestions on this...I own a laptop Thinkpad W510 (16GB ram, i7 Processor, 640 GB HDD). I have configured following setups on my laptop:
1) 4 node 11gR2 RAC using vmware Sever
2) 3 node 11gR2 RAC using windows 2003 server as DNS Server for SCAN on virtulbox
3) configured 1 node, 2 node and 4 node E-Business suite Installation
4) configured datagaurd in a RAC environment
please refer link:
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
So i would recommend to go for such configuration. If you're planning for dell then i would recommend to go for precision model
Hope this helps :)
thanks,
X A H E E R
Similar Messages
-
Problem while configuring email system in service desk message
Hi all,
I have configured my soution manager service desk for sending emails to the key user when the message status changes from New to In process.Now i want that a mail should go to the message processor when the message is assigned to him.For that i will have to define a new action but the issue is which smart form do i need to assign to that action.
Regards
PraveenHi Praveen
I am also doing Service Desk config. Can u please tell me how u configured External system. I was able to send messages internally. but from Other systems in landscape i am not able to. I f u have any document from end to end please send me.
Points will be awarded for the solution.
Rajesh -
Error checking transport group configuration in System BQS
Hi Everyone,
I made a client export from Production to Quality. It went successfully,, I noted the requests numbers and transported them from PRD to Quality, but while transporting there was a tp error(which i did not note), next i went to the quality import queue and saw all the 3 requests had come. But when i click the adjust queue icon im getting the following error message "Error checking transport group configuration in System BQS" . Afterwards i tried to delete the requests from quality to retransport from production but still im not able to delete those requests from quality. Can anyone help me solve this.
Regards,
RahulHello Rahul,
regarding the error message:
"Error checking transport group configuration in system"
It's mostly related to the TMSADM RFC destination. Kindly follow the below mention steps:
1. Logon to client 000 with user DDIC.
2. STMS > System > Overview > Select the system in which you are logged in > Click on the menu says EXTRAS > Generate RFC Destinations
Perform the above steps in all the systems configure in your TMS. This should resolve the issue.
Best regards,
Tomas Black -
[SOLVED] Configure The System (Beginners Guide) Question
Hello!
I'm currently working my way through the beginners guide, from the wiki. All going ok so far and I've reached the Configure The System section. Which is where I'm a bit stuck.
Beginners Guide wrote:You will be presented with a menu including the most important configuration files for your system. If you want to look up the available options as stated in /etc/rc.conf just press Alt+F2 to get a shell, look it up, and switch back to the installer with Alt+F1.
The problem I have is looking up the available options. For example, to find my locale it states I should run locale -a, however when I hit Alt+f2 and enter the command at the bash shell ([Arch Linux: /]# ) I get the following error
-bash: locale: command not found
When I attempt to lookup other items I'm also unable to find those (such as timezone in /usr/share/zoneinfo).
Can anyone let me know what I'm doing wrong, I'm missing something very obvious here, but sadly I just can't work it out!
Last edited by Laatia (2008-03-23 08:56:38)dyscoria wrote:
I wouldn't skip all of the steps, particularly adding your hostname to /etc/hosts. Just fill in as much as you can, and edit the rest after you've finished installing, though I think the defaults are safe enough to have a running system.
If you typed in 'km' and chose your locale before you ran the /arch/setup command to start the installation, it should automatically enter in the locale you selected earlier (if you press yes in the dialog box that pops up).
Confirm this as that's what happended in this location on 2 recent install. -
How to Configure Business System in SLD (SAP-XI).
Hi all,
I am new to XI. I want to know the detail scenario of configuring Business system in SLD(System Landscape Directory) in SAP-XI.
Can , anyone help me on this...hi suresh,
gothrogh this below liks ..........
http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/7b/d4653fd1d3b81ae10000000a114084/content.htm
http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+(SLD)
regards,
kesava -
How to configure AS400 System in SLD
Hi,
Am in need to configure AS400 system into SLD. Driver and connection are done. Am in need to add the system into SLD.
do we need to add AS400 DB2 system as the third party system?Prem,
It depends upon your client standards and SLD naming conventions. If there are mulitiple interfaces to this system, then I would create a 3rd party business system in SLD. After creating you need to assign the corresponding target system, so that when you transport it will take care. Once created you need to import it into your configuration and do your interfaces configuration accordingly.
Regards,
---Satish -
Configuration framework system error - the configurable won't be loaded
Hi, I have followed the tutorial on how to url=https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/Implementing%20Resource%20List%20Filters%20for%20Flexible%20UI%20Navigation/index.htm]Implement a Resource List Filters for Flexible UI Navigation[/url]
When uploading my par file into the portal, I get following error in the defaulttrace file, although the filter works :
<i>[synchronizer_(config://install/cm/services/resourcelistfilter)_(source:config://import/install/data/cm/services/resourcelistfilter)] cannot load [(configurable: SimpleTbpResourceListFilter:ResourceListFilter)] : ConfigException: Configuration framework system error: "id consistency error on [SimpleTbpResourceListFilter != SimpleTBPResourceListFilter] : the configurable won't be loaded ! please, check file name..."</i>
Seems like it's related to the configuration of the .co.xml file. Like in the tutorial I have created this file in location src.config - install - date - cm - services - resourcelistfilter (this folder had to be created manually, not generated by the RF wizard).
<u><b>_simple_tbp_resource_list_filter.co.xml</b></u>
<?xml version="1.0" encoding="UTF-8" ?>
<!-- file generated by configuration framework 03.03.2005 17:09:00 -->
<Configurable configclass="ResourceListFilter">
<property name="classname" value="z.imec.flexsort.filter.SimpleTBPResourceListFilter"/>
<property name="description" value="A sample implementation of a resource list filter. Filters out documents with TBP Valid From and Valid To properties."/>
<property name="alias" value="SimpleTBPResourceListFilter"/>
</Configurable>
<u><b>configArchive.properties</b></u>
# com.sap.portal.pdk.srv.config
ca.name=SimpleTBPResourceListFilter.prjconfig
ca.version=6.0.1.1
ca.creation.time=1708
ca.creation.date=20070425
ca.creation.user=Kevin Laevers
ca.creation.machine=unknown
ca.dependencies: bc.util.prjconfig, bc.sf.prjconfig, bc.sf.service.prjconfig, bc.rf.prjconfig
cma.name=SimpleTBPResourceListFilter.prjconfig
cma.version=6.0.1.1
cma.storage=sfs
cma.creation.time=1708
cma.creation.date=20070425
cma.creation.user=Kevin Laevers
cma.creation.machine=unknown
cma.dependencies: bc.util.prjconfig, bc.sf.prjconfig, bc.sf.service.prjconfig, bc.rf.prjconfig
Any idea on the message in the defaulttrace file?
Thanks :o)
KevinHello,
Can you please explain what exactly the issue? I'd like to know any issues you are having with the video workflow.
Thanks,
Vish -
How to configure a system property
Hi everybody,
Does anybody know how to configure a system property through WebLogic 11g console?
I´d like to configure a property through web console and then get this property in my java code. Something like this:
System.getProperty("foo");
Is it possible?
Thanks,
FernandoHi Fernando,
Please refer to the following link which tells us how we can set the JAVA_OPTIONS from the Admin Console....
http://weblogic-wonders.com/weblogic/2010/03/26/nodemanager-based-managedservers-setting-mem_args/
The above link demonstrate that how we can set *"-Duser.dir=E:/MyDirectory"* System property.....
Now you can set your own JAVA_OPTION like following:
-Dfoo=MyFooValue
After setting above propertu in AdminConsole MEM ARGS you need to restart the Server. then you can use the following code:
String result=System.getProperty("foo");
Thanks
Jay SenSharma -
How to Configure the system to use an firm's accepted warning banner in 10g
Hello.
I need to configure the system (oracle 10.2) to use an firm's accepted warning banner. I was able to do it in version 11 by putting entries in sqlnet.ora file. It then displayed when connectting as user (sys, system). I tried the same with 10.2 version and it doesnt display. Do i need to do anything different in 10g. I could not find the lead on googling it.
I used theses entries in sqlnet.ora for 11g
SEC_USER_UNAUTHORIZED_ACCESS_BANNER = <path>\banner2.txt
SEC_USER_AUDIT_ACTION_BANNER = <path>\banner.txt
Do we have to do differenetly in 10g. please help
Thank you very muchmaggie wrote:
Thanks for responding. Is there a way to create a banner in 10.2 version of oracle. I need to didpaly it as part of checklist i am working on for 10g.
ThanksUnfortunately, auditors and security nazis dream up "requirements" without ever considering the capabilities and limitations of the selected technology. A lot of these guys get their technical knowledge from American Airlines Magazine when they get tired of reading the SkyMall catalog.
Sometimes you just have to document the exception, get a manager's signature, and keep it on file. -
How to configure new system landscape in portal server for bsp iview
Hi
can you tell me what are the necessary parameters (apart form default parameters that were there while creating new system landscape) for configuring a system landscape for using it in bsp iviews.
thanks & regards
AshutoshHello,
what you call system name has to be the system alias, and this alias has to be the same between DEV/QUAL/PROD environment.
Your portal application will look for data/BAPIs/etc... with this alias. Your portal application will know on which environment it has to retrieve data/BAPIs/etc... will be defined in each system object you have defined for each environment.
Fabien. -
How to configure satellite system in Solution manager
Hi,
Please advise me how to configure satellite system in solution manager.
Regards,
AsifHi,
can you check this installation guides
[ http://service.sap.com/solutionmanager][http://help.sap.com/saphelp_smehp1/helpdata/en/b7/07e4cf1a364a0482e29122c329b7d3/frameset.htm]
Regards,
Muralidhar -
How to configure the system cache
I found that JS2E has this enhancement:
System Cache: Java Web Start now contains both system and user caches. The system administrator can now pre-load applications and shared libraries into the system cache so that multiple users can share the same resources.
Now how exactly do I pre-load applications?Clearly the documentation of these two subjects needs to be addressed. I will try to get a compete "How to" document posted later in the month, meanwhile:
1.0)Enterprise Configuration Setup
To configure a system or enterprise configuration, you need to create a file called �deployment.config� and put it in the right place. Java Plug-in and Java Web Start will look for this file first in the directory it calls �deployment system home� , and if not found there, will look in lib directory of the JRE you are running Plug-in or Web Start from. The �deployment.system.home� directory is platform dependent. On unix, it is �/etc/.java/deployment�. On Windows it is <windows dir>/Sun/Java/Deployment.
If the file is in deployment.system.home, it will be used by all jres (only valid from 5.0 and up). If the file is not there, but in the lib directory of the jre, it will only be used when that Plugin-in or Web Start are launched from that jre.
The file contains is a java properties file, with only two possible properties in it: deployment.system.config, and deployment.system.config.mandatory. Here are two example deployment.config files:
deployment.system.config=http\://MyCompany.com/deployFiles/deployment.properties
deployment.system.config.mandatory=true
deployment.system.config=file\:/C\:/Program Files/java/jre1.5.0/lib/deployment.properties
deployment.system.config.mandatory=false
Note in both examples, the colon in a properties file must be escaped. This also applies to backslashes themselves in the examples below. This is a common problem.
The first example could be deployed by the admin in deployment.system.home, to require all jres used on this system to load the default and locked properties from the url before launching any Java Plug-in applet or Java Web Start application.
The second example could be deployed with the jre, with both deployment.config and deployment.properties
The deployment.properties file pointed to, can contain any of the properties that can be contained in the users deployment.property file (see list on http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html). They can also lock properties by listing the property key with �.locked� appended to it. Here is an example system deployment.properties file:
deployment.user.cachedir=D\:\\deployment\\cache
deployment.security.sandbox.awtwarning=false
deployment.security.askgrantdialog.notinca=false
deployment.security.askgrantdialog.notinca.locked
The first two properties are not locked. The use can change to use a different cache location, or turn back on the AWT Warning banner. The last property is locked. The user is not allowed to grant trust to applications who's jars are selfsigned (or signed with any root not in the rootCA certificate store, nor is he allowed to change this setting. The entry in the control panel for this property will be disabled, and any change made to the users deployment.properties file for this property will be ignored.
Now for system cache:
The system cache property is:"deployment.system.cache.dir". It can be set in either an enterprise or users deployment.properties file with:
deployment.user.cachedir=D\:\\deployment\\system\\cache
/Andy -
Hi Expert,
how to configure HA system, i am having ecc6.0 ehp4 with maxdb7.8.in my existing landscape i am having DR setup.
please guide me on that.
Thanks.
Naresh KKHello Naresh,
Please go through the following links for better understanding of HA installation.
http://www.sdn.sap.com/irj/sdn/ha#section16
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029ec90-0201-0010-b192-8306f27295c2?QuickLink=elearn&overridelayout=true
Please let us know if you still need clarification.
Thanks,
Siva Kumar -
Parser Error Message: Unrecognized configuration section 'system.webServer'
at the time of rum show Error
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Unrecognized configuration section 'system.webServer'
Source Error:
Line 34: </httpModules>
Line 35: </system.web>
Line 36: <system.webServer>
Line 37: <validation validateIntegratedModeConfiguration="false"/>
Line 38: <modules>
Source File: c:\inetpub\wwwroot\ACS-Driver\web.config Line: 36
Version Information: Microsoft .NET Framework Version:1.1.4322.2379; ASP.NET Version:1.1.4322.2379my server :
os windown server 2003
iis 6.0 -
How do I configure my system so that Oracle 10g properly shuts down and sta
How do I configure my system so that Oracle 10g properly shuts down and starts up when I reboot my Solaris system?
http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref255
-
Configuration BIW system in SAP ECC 5
Hi Expert
How to configure BIW system in SAP ECC 5 any notes for support configuration BIW system in SAP ECC 5
Regards,
Rahulmost of it is not a Basis jobs. you need to configure source systems in RSA1, this is directly linked to SM59.
for the rest, you might need to install Plug-ins, but the rest is the job of the BW functional.
Maybe you are looking for
-
I'm using iPhoto '08 7.1.5 and trying to print a color photo that I made black and white and it only prints the blackest blacks and the whitest whites, but nothing in between, giving me a partially printed picture. Is there some kind of setting that
-
Using sql*loader in forms4.5
Is it possible to use sql*loader in forms4.5(client side)?? If so, how can this be achieved?? Thanks null
-
FBL3N standard program to ZCOPY program issue
When I take a ZCOPY of standard program RFITEMGL of transaction code FBL3N and put break point over Function Module FI_ITEMS_DISPLAY and look into the table it_pos the material number and vendor numbers are not getting populated but without takin
-
Put "Background from Layer" in the pop-up menu of the layer
Sometimes you need to convert a layer into a background. There is an option "Background from Layer" in the Layer menu and it is good where it is, but I think it would be good and very intuitive to add it also to the pop-up menu of the layers in the l
-
We have a single 4404 that was setup long before I arrived with Guest networks that timeout and other such tweaks. Is there a document somewhere that shows a way to migrate the old settings to a new 5508 that we are purchasing? By the time the 5508