Configuration of Technical Landscape in SLD

Hi,
I am trying to do what is said in "SAP Exchange Infrastructure 3.0 Installation" guide page (38). It is for maintaining the product forthe Technical System.
It says as follows....
Item #1 In the System Landscape Directory pageon your SLD host, Choose Technical Landscape. ( I did this, and it works )
Item # 2 In the NAME column choose the technical system that you have created above for the integration Server. ( there is no column name NAME,and the actual screen on WEB AS6.40 is different/ Can somebody help?? Is there a new document that I need to refer to for this configuration? The guide(SAP Exchange Infrastructure 3.0 Installation) I have has a June 04 date.What am I doing wrong here? I followed the instruction on doc to configure the tech system, but I am not getting through.
Please somebody guide...Any help would be greatly appreciated....I am be very well looking at an old doc??
Thanks
Shaji

Michal,
All the configuration were correct,and I followed the same instrucations, but it was not showing the NAME. I stop and start the server 2 times, and then its there !!!.
Solved by itself. But now I came across another issue. I am trying to do RFC destination (SM59)in XI central instance Client 000. I am able to complete the Technical Settings, but when I go to Security/Logon Tab, and select Basic Authentication, I am not able to enter the userID, Password, and the client information. Its grayed out.
Any help would be a greatly appreciated.
Thanks
Shaji

Similar Messages

Configuring Technical Landscape in SLD.

Hi,
I am configuring a Technical landscape to connect with the SAP system.
The final step, choosing software Product is throwing an error
"The selected product has no software components Please select a different product "
Could Any oe help out here. Thanks.
Cheers,
Sam

Hi Sam,
Check this
technical system creation problem in SLD
Regards, Anilkumar

No technical system in sld configuration in Enterprise portals

Dear All,
while configuring sld in Enterprise portal , iam getting web as java and and iam not getting web as Abap technical system, where im doing wrong, i have passed parameters in Data Supplier Bridge, but not getting Abap technical system in sld, please help in this regard,
thanks & Regards,
Balakrishna.

i am trying to setup sld for newly installed sap system in my lab
http://help.sap.com/saphelp_nw04/helpdata/en/23/b557422d095542e10000000a1550b0/content.htm
i think my system is scenario-2 .
as i have ep sneak preview system installed on my single stem with good configuration .
it was running good for enterprise portal.
and i have r/3 system in the network .
i like to setup sld. so as to make connection between ep and r/3
in the above link it says.
first step go and run where sap netweaver administration system
1. i did that on the ep system
2. choose service ->sld services->http service (i did that)
3.but when ??? it comes to host and port of the ( Enter the Host and the HTTP port of the system to which your system will report the data..)
i am not sure about the host and port where do i need to look for that
and even what host name and port number i am supposed to get at the R/3 system end .
it would of great help if some one can throw some light r help me to walk through that
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2167- [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
i hope even this link helps as i followed all these steps
but in that i am unable to see the R/3 system in web as abap( R/3 system is up and running good
thanking you prattipati

Technical systems in SLD are deleted

Hello Experts,
I have a problem with my new NW PI 7.01 System. I have installed it some days ago and it was running until yesterday.
I created two technical and business systems. But now they are away. In the SLD I cant find them anymore. I wanted to create some new technical systems but I can´t end the process. In the last step I have to enter what product and versions are installed one the server but there is nothing what I can choose. The list is empty!
As is sad yesterday it was running an I did nothing special what triggerd this problem
Can anybody tell me what the problem is?
Thanks

Search in Google/SDN, you would find much information on this topic.
Check the below links:
System Landscape Directory (SLD)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/204994f3-0e44-2a10-17b3-808fbd8db4aa?quicklink=index&overridelayout=true
Thanks,

Define Web AS JAVA Technical System in SLD

I deleted WAS JAVA Technical System in SLD by mistake.
Later I've tried to redefine the it in technical system landscape, but some technical information such as URL, host, database, instance disappeared.
Is there a special steps to define WAS JAVA technical system?
Thanks

Please send me a mail to [email protected] , I will send you the page (in bmp format) with all the definitions...
Hope it will help you

Problem creating new ABAP Technical System in SLD

I newly installed a ECC 5 IDES system (ABAP + JAVA) on my computer for ABAP and Webdynpro learning.
I got problem when I try to create new ABAP Technical System in SLD.
I put my steps of installation here so you know my full story.
1. Install Central Instance (Non-unicode);
2. Install Database Instance (Non-unicode);
3. Install Java add-in on ABAP;
4. Configure the HTTP connection parameters in J2EE Engine Visual Administrator
All of the above steps are successful.
Now my Webdynpro application need to access a Function Module, so I want to create a JCo connection in Webdynpro Content Administrator, but both application server and message server are not available, so I can't create any connection.
I go back to SLD to register ABAP Technical System step by step below:
1.      Choose Home ® Technical Systems.
2.      Choose New Technical System.
3.      Select the AS ABAP radio button.
4.      Choose Next.
5.      Enter system details (Installation number, host name).
6.      Choose Next.
7.      Enter message server and central application server details.
8.      Choose Next.
9.      Choose Next.
10.    Add New Client 800, leave logical name blank, click Add.
11.    Choose Next.
12.    Here the system says 'No product available', the whole effort make no sense.
I tried every possible settings, but at step 12 it keeps telling me 'No product available'.
This is the problem I want to fix.
Can anyone help me?
Thanks a lot in advance.

hi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya

What's different between busniess system and technical system in SLD?

I can enter product(ect.ERP r/3) , components(ect.FI-CO module) to technical system , then enter technical system to busniess system but ,who can explain what's different between busniess system and technical system in SLD, exactly?
THANKS!

Technical Systems are of following types:
Technical systems are application systems that are installed in your system landscape. An example of an application system is a Customer Relationship Management (CRM) server. In the SLD, there are five types of technical systems:
1.)WEBas java,
2.)Standalone JAVA
3.)Third party
4.)Web as ABAP
1) Web AS Java
Web AS Java systems consist of one or more instances and each instance is installed on a separate host. An instance itself consists of cluster nodes that can communicate with each other.
2.)Standalone Java
Standalone Java technical systems are standalone Java applications that are installed in a computer system from an administration perspective. They can also be installed as an operating system service or as a daemon
Web AS java belongs to the NetWeaver Comes with both ABAP and Java, Standalone instread comes separate from the netWeaver.
3) Third party technical sytem
It can be any of the technical sytem. let us say if you want to send a file to R/3, here the file reside in your local system. for that you can define your local system as a third party technical system.
All those machines that comes under non sap, belongs to the third party.
4.) Web AS ABAP technical systems, ranging from any SAP system to an APO server or CRM server, are based on the same Basis Component (BC), which includes the ABAP interpreter, ABAP Dictionary, ABAP Workbench, and so on. A dedicated database, which stores most of the data of the BC and the application components, is associated with the system.
Also refer : http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
Business systems are logical systems, which function as senders or receivers within XI. Business systems can be SAP systems or third-party systems.
Depending on the associated technical system, the following types of business systems are defined in the SLD:
· Web AS ABAP
A business system, which is associated with a Web AS ABAP.
A business system, which is associated with a Web AS ABAP, can play the role either of an application system or an integration server. An integration server is the central component of XI, which provides a framework for the exchange of information among various internal and external entities of a company. The integration server facilitates the interaction between the different operating systems and applications across internal and external networks.
· Web AS Java
A business system, which is associated with a Web AS Java.
· Standalone
A business system, which is associated with a standalone Java application.
· Third-party
A business system, which is associated with a third-party technical system.
http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm

Error CIM_ERR_FAILED - Configure the integration server for sld

Hi,
I´m running the Configuration Wizard SLD in "PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage". In step 33/142 Configure the integration server for sld, I got following error:
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
Someone help me?
Regards,

The version is 7.0. I skip this step and finished with sucess. No run the step:
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Cancelled
PI_01_This template checks if the necessary services are started Cancelled
PI_05_This wizard will configure the integration server for sld Incompletely executed
These steps are with the same error.
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement

Error while exporting the 3rd party technical system in SLD

Dear all,
    We're currently using PI 7.0. When trying to export the technical system in SLD, after the exporting, the IE jumps to the download page automatically, but there's a exclamation mark with no text info. I've tried to create a new 3rd-party technical system and try to export, the same thing happened.
    It happened in both our develop and our production PI system.
    Also I've found following error info in SLD server log:
Log Record Details
#33 04/19/2007 10:07:38.573 [SAPEngine_Application_Thread[impl:3]_33]
ERROR com.sap.sld.wd.technicalsystem.ExportView: null
Thrown:
java.lang.UnsupportedOperationException
at java.util.AbstractCollection.add(AbstractCollection.java:216)
at java.util.AbstractCollection.addAll(AbstractCollection.java:319)
at
com.sap.lcr.webui.admin.ImportExportControl.addAssociatorAndReferenceNames(ImportExportControl.java:1244)
at com.sap.sld.wd.technicalsystem.ExportView.getBCSystemExportList
(ExportView.java:285)
at com.sap.sld.wd.technicalsystem.ExportView.getExport
(ExportView.java:193)
at com.sap.sld.wd.technicalsystem.wdp.InternalExportView.getExport
(InternalExportView.java:137)
at
com.sap.sld.wd.technicalsystem.wdp.IPrivateExportView$IContextElement.wdGetObject(IPrivateExportView.java:208)
at com.sap.tc.webdynpro.progmodel.context.AttributePointer.getObject
(AttributePointer.java:158)
at com.sap.tc.webdynpro.clientserver.data.DataContainer.getAndFormat
(DataContainer.java:1092)
at com.sap.tc.webdynpro.clientserver.data.DataContainer.getAndFormat
(DataContainer.java:1064)
at
com.sap.tc.webdynpro.clientserver.uielib.standard.impl.FileDownload._getData(FileDownload.java:81)
at
com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FileDownloadAdapter.getReference(FileDownloadAdapter.java:291)
at com.sap.tc.ur.renderer.ie6.LinkRenderer.render(LinkRenderer.java:53)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(GridLayoutRenderer.java:826)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridLayoutRenderer.java:424)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutFragment
(GridLayoutRenderer.java:336)
at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.render
(GridLayoutRenderer.java:79)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at com.sap.tc.ur.renderer.ie6.GroupRenderer.renderGroupFragment
(GroupRenderer.java:1184)
at com.sap.tc.ur.renderer.ie6.GroupRenderer.render
(GroupRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutItemFragment(FlowLayoutRenderer.java:254)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutFragment
(FlowLayoutRenderer.java:210)
at com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.render
(FlowLayoutRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
(ScrollContainerRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
(ViewContainerRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutItemFragment(FlowLayoutRenderer.java:254)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutFragment
(FlowLayoutRenderer.java:210)
at com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.render
(FlowLayoutRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
(ScrollContainerRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
(ViewContainerRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
(ViewContainerRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(GridLayoutRenderer.java:826)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridLayoutRenderer.java:424)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutFragment
(GridLayoutRenderer.java:336)
at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.render
(GridLayoutRenderer.java:79)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
(ScrollContainerRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.UiWindowRenderer.render(UiWindowRenderer.java:52)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendHtml
(HtmlClient.java:1039)
at
com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.fillDynamicTemplateContext(HtmlClient.java:455)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
(HtmlClient.java:1223)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
(HtmlClient.java:1179)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
(HtmlClient.java:299)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.finishTasks
(AbstractClient.java:173)
at
com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
at
com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:753)
at
com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing
(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
at
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent
(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost
(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:401)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:387)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:365)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:160)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Hope you can help us.
Thanks and B'Rgds,
YiNing

not sure if it has relevance, but the SLD level transports will do nothing but create a CIM file which should be downloaded to your deskktop.
1. Make sure that there are no Pop Up BLocker's acting on the XI server on your machine.
2. Make sure that you have the download authorizations on your machine.
Regards
Bhavesh

Technical Landscape For Utilities

Hi All, I was wondering if anyone had any learning points or gotcha's for designing the SAP for Utilities Technical Landscape. OUr project consists of CTI/IVR ,TOU, Retailer, Billing, Web integration . We currently run SAP FI, AM, HCM, and are looking to add CRM/I SU next Winter. I assume most information is passed between systems using PI ? If anyone has any info on the CRM middle ware piece or project suprises, I would be happy to know! Thanks.

Hi
All sales and marketing activities from the customer service area of IS-U have been transferred to CRM. Analyses previously performed in IS-U now run in BW.
CRM performs all activities relating to customer interaction. Various channels, such as call centers, Internet and laptops can be used to communicate with customers. Data objects are synchronized via the Middleware and exchanged with the backend and analysis systems.
CRM: Customer Interaction System
CRM is the front-end system used for interaction with the customer. It contains the full range of functions from the areas of marketing, sales, and customer retention. CRM supports communication with customers via a number of channels:
·        Internet
Integration of Web-based applications (Internet sales and marketing) in the CRM system.
·        Contact center
Integration of telephony systems in CRM via CTI interface. All call center scenarios are fully telephony-compatible.
·        Mobile clients
The most important data and functions contained in CRM are accessible via laptop in offline applications. Data is synchronized with the online system via the Middleware.
IS-U: System for Device Management, Contract Accounts Receivable and Payable, Billing, and Invoicing
IS-U is the backend system. Information on new customers is not transferred to IS-U until a contract has been concluded with the customer. It contains all the data and transactions for the following areas: device management, contract accounts receivable and payable, billing, and invoicing.
These areas cover the installation of devices, calculation and request of budget billing amounts, entry of meter reading results, billing, invoicing, generation payment requests, and monitoring of payment receipts.
BW: System for Analyses, Planning, Monitoring, and Success Checks
BW: When integrated, serves as instrument for analyses, planning, monitoring, and success checks. BW enables you to gather information from any system (CRM, FI, IS-U as well as external systems) in InfoCubes and evaluate them based on your requirements. Furthermore, these analyses are not restricted to one InfoCube; you can use any number. For each SAP solution, SAP supplies specific BW contents. These provide the necessary conditions for importing data into BW; they also contain predefined reports and analyses that you are free to enhance. These contents are filled by extractors that transfer the data from the various systems to BW.
Data Synchronization between CRM und IS-U
Both IS-U and CRM can operate independently and in combination with external systems. This necessitates the existence of central objects in both systems. In an integrated scenario, there are a few objects that are synchronized via the Middleware since they must be available in both systems. The integrated scenario SAP CRM and SAP IS-U supports the automatic synchronization of the following objects:
·        Business partners and their contract accounts
·        Contracts
·        Connection objects and points of delivery
·        IS-U contacts in CRM activities
To ensure data consistency and transparency, changes to objects in one system are immediately synchronized in the other system.
For more information see the cookbooks IS-U/CRM Integration of Technical Objects,
https://websmp208.sap-ag.de/~sapdownload/011000358700000039982009E/Vertragsintegr_Dez08_e.pdf
The replication of business partner and business agreement is carried out by the CRM standard. For this please refer to CRM Middleware config best practices C71_BB_ConfigGuide_EN_DE.doc.
For the replication of the other data from SAP CRM in SAP IS-U, the IS-U master data generator plays an important role:
u2022        Technical objects such as points of delivery must be replicated from SAP CRM into SAP IS-U. Master data templates with the template category CRMTECHOBJ are used for this purpose.
u2022        During the replication of the CRM contract items, contracts must be created in SAP IS-U, among other things. These data changes are made in SAP IS-U with master data templates of the category CRMNEWCONTRACT.
Regards
Parasar

Technical system in SLD for Exchange Infrastructure prod entry deleted

Hello,
Technical system in SLD for Exchange Infracture does not have any entries.
Integration server entry is also not existing.
adapter engine,domain,integration server,integration directory,integration repository,rwb do not exists.
My main concern is there is no entry for Integration Server - how can I get back this entry . I restarted J2EE engine from NWA but still I am not able to see Integration server entry under Exchange Infrastructure technical system.
I also did RZ70 but no use.
Please suggest.

Hi
One of the steps, when applying note #764176, is to delete all 6 of these entries in the SLD. So deleting the entries is not a big problem. These entries should be automatically created when you have successfully completed all the steps in note #764176. So, I'd recommend to apply all steps in this note.
Also, ensure the system is consistently patched i.e. ABAP, Java and XI components must be on the same SP level. An inconsistently patched system is another possible cause of this error.
What happens when you run the SLDCHECK transaction? Do you see errors here?
Regards
Mark

Registering a new technical system in SLD - ABAP based

Hi friends,
For ,Registering a new technical system in SLD - ABAP based
I followed the following steps...
At first
- went to the SDL - http://server:port/sld
- went to the "Administaton" tab
- went to the "Data Supplier Bridge"
In RFC Gateway
Server :
Service :
What I to give Here...
is it the R/3 System Server and Service
Please suggest regarding it...
With Regards,
Sunil

Hi Michal,
Thanks for the Blog. It was really enlightening to find out how the Technical systems are registered. But my problem is not solved yet.:(
I have newly installed a CRM 2007 system, and tried to see the Technical systems AS ABAP and AS JAVA which should be automatically created. But no AS ABAP system was created. So i tried doing it using your Blog.
In the Admin tab of SLD, i did not find any "Data Suppliers Bridge", but there was a "Data Suppliers" tab. On clicking it, i verified that sld/active was TRUE, and then updated the data in RZ70 and clicked on Activate button. The activation was successfully done, but no new AS ABAP Technical system appeared.
Is there any more configs left to be done? Please help me out with this issue. Thanks in Advance.
Regards,
Savan D.

No Installed Products while adding Technical System in SLD!

Hello,
I am trying to add Technical Systems in SLD. when I was at the point to select the software components, I am not seeing any installed products on the left side.
I already gave the ABAP system details in the previous screens, in this wizard.
Why is it that I am not seeing any installed products.
Thanks
Srinivas

Hi Jazz,
Here are the errors I am getting.
Import finished with 72 errors
Errors:
CIM_ERR_FAILED: CIM qualifier Alias is currently not supported by this implementation
QUALIFIER.DECLARATION Alias
CIM_ERR_FAILED: CIM qualifier BitMap is currently not supported by this implementation
QUALIFIER.DECLARATION BitMap
CIM_ERR_FAILED: CIM qualifier BitValues is currently not supported by this implementation
QUALIFIER.DECLARATION BitValues
CIM_ERR_FAILED: CIM qualifier Composition is currently not supported by this implementation
QUALIFIER.DECLARATION Composition
CIM_ERR_FAILED: CIM qualifier Counter is currently not supported by this implementation
QUALIFIER.DECLARATION Counter
CIM_ERR_FAILED: CIM qualifier Delete is currently not supported by this implementation
QUALIFIER.DECLARATION Delete
CIM_ERR_FAILED: CIM qualifier Deprecated is currently not supported by this implementation
QUALIFIER.DECLARATION Deprecated
CIM_ERR_FAILED: CIM qualifier DN is currently not supported by this implementation
QUALIFIER.DECLARATION DN
CIM_ERR_FAILED: CIM qualifier Expensive is currently not supported by this implementation
QUALIFIER.DECLARATION Expensive
CIM_ERR_FAILED: CIM qualifier Experimental is currently not supported by this implementation
QUALIFIER.DECLARATION Experimental
CIM_ERR_FAILED: CIM qualifier Gauge is currently not supported by this implementation
QUALIFIER.DECLARATION Gauge
CIM_ERR_FAILED: CIM qualifier Ifdeleted is currently not supported by this implementation
QUALIFIER.DECLARATION Ifdeleted
CIM_ERR_FAILED: CIM qualifier In is currently not supported by this implementation
QUALIFIER.DECLARATION In
CIM_ERR_FAILED: CIM qualifier Invisible is currently not supported by this implementation
QUALIFIER.DECLARATION Invisible
CIM_ERR_FAILED: CIM qualifier Large is currently not supported by this implementation
QUALIFIER.DECLARATION Large
CIM_ERR_FAILED: CIM qualifier MaxValue is currently not supported by this implementation
QUALIFIER.DECLARATION MaxValue
CIM_ERR_FAILED: CIM qualifier MinLen is currently not supported by this implementation
QUALIFIER.DECLARATION MinLen
CIM_ERR_FAILED: CIM qualifier MinValue is currently not supported by this implementation
QUALIFIER.DECLARATION MinValue
CIM_ERR_FAILED: CIM qualifier Nonlocal is currently not supported by this implementation
QUALIFIER.DECLARATION Nonlocal
CIM_ERR_FAILED: CIM qualifier NonlocalType is currently not supported by this implementation
QUALIFIER.DECLARATION NonlocalType
CIM_ERR_FAILED: CIM qualifier NullValue is currently not supported by this implementation
QUALIFIER.DECLARATION NullValue
CIM_ERR_FAILED: CIM qualifier Octetstring is currently not supported by this implementation
QUALIFIER.DECLARATION Octetstring
CIM_ERR_FAILED: CIM qualifier Out is currently not supported by this implementation
QUALIFIER.DECLARATION Out
CIM_ERR_FAILED: CIM qualifier PropertyUsage is currently not supported by this implementation
QUALIFIER.DECLARATION PropertyUsage
CIM_ERR_FAILED: CIM qualifier Provider is currently not supported by this implementation
QUALIFIER.DECLARATION Provider
CIM_ERR_FAILED: CIM qualifier Read is currently not supported by this implementation
QUALIFIER.DECLARATION Read
CIM_ERR_FAILED: CIM qualifier Schema is currently not supported by this implementation
QUALIFIER.DECLARATION Schema
CIM_ERR_FAILED: CIM qualifier Source is currently not supported by this implementation
QUALIFIER.DECLARATION Source
CIM_ERR_FAILED: CIM qualifier SourceType is currently not supported by this implementation
QUALIFIER.DECLARATION SourceType
CIM_ERR_FAILED: CIM qualifier Static is currently not supported by this implementation
QUALIFIER.DECLARATION Static
CIM_ERR_FAILED: CIM qualifier Syntax is currently not supported by this implementation
QUALIFIER.DECLARATION Syntax
CIM_ERR_FAILED: CIM qualifier SyntaxType is currently not supported by this implementation
QUALIFIER.DECLARATION SyntaxType
CIM_ERR_FAILED: CIM qualifier Terminal is currently not supported by this implementation
QUALIFIER.DECLARATION Terminal
CIM_ERR_FAILED: CIM qualifier TriggerType is currently not supported by this implementation
QUALIFIER.DECLARATION TriggerType
CIM_ERR_FAILED: CIM qualifier UnknownValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnknownValues
CIM_ERR_FAILED: CIM qualifier UnsupportedValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnsupportedValues
CIM_ERR_FAILED: CIM qualifier Write is currently not supported by this implementation
QUALIFIER.DECLARATION Write
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property ScheduledStartTime
CIM_Job
CIM_ERR_FAILED: Unknown qualifier Write found in property DeleteOnCompletion
CIM_JobSettingData
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_ConcreteJob: CIM_Job
CIM_ConcreteJob
CIM_ERR_FAILED: Unknown qualifier Write found in property EnabledDefault
CIM_EnabledLogicalElement
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_System
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_Service
CIM_ERR_FAILED: Unknown qualifier Gauge found in property AvailableSpace
CIM_FileSystem
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property array PowerManagementCapabilities
CIM_ComputerSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property NumberOfUsers
CIM_OperatingSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property FileSize
CIM_LogicalFile
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property PowerManagementSupported
CIM_LogicalDevice
CIM_ERR_FAILED: No such override property in superclass CIM_System: EnabledState
CIM_ApplicationSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property WorkingSetSize
CIM_Process
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_LogicalPort: CIM_LogicalDevice
CIM_LogicalPort
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_Processor: CIM_LogicalDevice
CIM_Processor
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkAdapter: CIM_LogicalDevice
CIM_NetworkAdapter
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkPort: CIM_LogicalPort
CIM_NetworkPort
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_OSProcess
CIM_OSProcess
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FRUIncludesProduct
CIM_FRUIncludesProduct
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_ProductParentChild
CIM_ProductParentChild
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FileStorage
CIM_FileStorage
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class CIM_ProvidesServiceToElement
CIM_ProvidesServiceToElement
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_RunningOS does not exist.
CIM_RunningOS
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_SystemDevice
CIM_SystemDevice
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_BootOSFromFS does not exist.
CIM_BootOSFromFS
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property CompiledBits
SAP_BCApplicationServer
CIM_ERR_FAILED: Unknown qualifier STATIC found in property AccSldModelVersion2
SAP_ACEEngine
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterface: CIM_NetworkPort
SAP_ACENetworkInterface
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_JCODestination
SAP_JCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_MsgServJCODestination
SAP_MsgServJCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_AppServJCODestination
SAP_AppServJCODestination
CIM_ERR_FAILED: Class SAP_ACENetworkInterface referenced by association SAP_ACENetworkToNetworkInterface does not exist.
SAP_ACENetworkToNetworkInterface
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_ACEAssociatedVirtualizationManager does not exist.
SAP_ACEAssociatedVirtualizationManager
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_HostedACEEngine does not exist.
SAP_HostedACEEngine
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterfaceComponent: CIM_SystemDevice
SAP_ACENetworkInterfaceComponent

New Technical System in SLD

Hi all...
I need to point my portal to a ECC 6 instance, but I don't have this product created in my SLD.
Can I create this?! Or I need to download something from SAP?
Thank's!

Hi Glauber Balbinot Vicari,
Could you please check with [Configuring Systems to Connect to SLD |http://help.sap.com/saphelp_nw70/helpdata/en/11/0dfe55e0c8fc4e910706a47ca6859b/content.htm]
Regards,
S.Manu.

How to configure new system landscape in portal server for bsp iview

Hi
can you tell me what are the necessary parameters (apart form default parameters that were there while creating new system landscape) for configuring a system landscape for using it in bsp iviews.
thanks & regards
Ashutosh

Hello,
what you call system name has to be the system alias, and this alias has to be the same between DEV/QUAL/PROD environment.
Your portal application will look for data/BAPIs/etc... with this alias. Your portal application will know on which environment it has to retrieve data/BAPIs/etc... will be defined in each system object you have defined for each environment.
Fabien.

Configuration of Technical Landscape in SLD

Similar Messages

Maybe you are looking for