CONFIGURATION OF TEMPLATES FOR IPCC AGENTS

Suppose I have 100 agents in a Cisco IPCC Express environment, and I want to asignate them some skills. Is there any way of configuring a "template", so I can make bulk modifications or I have to make all changes one by one?
Thank you very much!

No. CCX does not have a BAT Template-type concept. Your closest option will be the Assign Skills option within RmCm Configuration. This will let you assign skills to multiple agents all at once.

Similar Messages

How to configure windows services alerts in SCOM 2012 for all agent servers. For eg, Terminal Services, Netlogon, RPC etc..

Hi,
I need to configure different windows services alerts in SCOM 2012. Below are some of the windows services I need to monitor through SCOM.
Serivce: Windows Management Instrumentation
Service: Netlogon
Service: Remote Procedure Call (RPC)
Service: Server Service
Service: Terminal Services
Service: Windows Time
Service: Workstation
Service : WWW Publishing Service
Could some one please assist or share me the details, how to configure these services for windows agent servers.
Thanks..
Regards, Rajeev Parambil

Hi,
A certain set of services are monitored by default on all agents:
DNS Client
DHCP Client
RPC
Workstation
Server
For all the other services you could create a service monitor.
A nice blog series outlining this process can be found here: http://www.bictt.com/blogs/bictt.php/2011/03/16/scom-monitoring-a-service-part1
It's doing common things uncommonly well that brings succes. Check out my SCOM link blog:
SCOM link blog

"Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"

We are running into a problem which we have noticed on UCCE 8.5 and havent seen on earlier 7.5 release.
If we setup a CTI port as agent device target and if we try to login the agent using Cisco Desktop (Not CAD, just CTI OS Client) then we get following error:
"Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"
But this wasnt the issue with 7.5 and we were able to do agent login with CTI Port as device target. We dont intend to use Mobile Agent feature but just login UCCE agent to CTI port as the device.
Do we know if this is a known issue or if something has changed between 7.x and 8.x release which could be is causing this?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

How to create bulk configuration files from a template for staging?

Hello,
We have created a sample configuration for ISRG2 2901 Router. The sample configuration is long, and with copy/paste it is possible to skip some lines, and it is difficult to ensure the configuration of every device is standardized due to this error possibility. What we are trying to achieve is first create a template from this sample configuration file, and then create configuration files for each device seperately and automatically. After creating this configuration instances, we want to be able to distribute the configuration files (and possibly the ios) to the devices during the staging phase. Since there are about 1000 2901 routers, creating configuration files is important?
From searching we have found the following tools:
1) CCE (Cisco Configuration Engine): This tool seems to be very efficient for distributing the created configuration files. We may use the serial number of the device, and it provides almost zero touch provisioning of the configuration files to the devices. Creating the configuration file from the template seems to be manual, i.e enter the ip addresses of the interfaces, the routing tables one by one for each device. How can we use velocity template for device configs?
2) Ciscoworks LMS Prime: It is possible to create a baseline template for the devices, and after getting the backup configuration of the routers, it is possible to compare the actual configuration of the device with the baseline template, and understand if there is any difference with each other. This is indeed very useful in order to keep the configuration standardized, we again could not find a way to create bulk configuration files from the baseline template.
3) Solarwinds Config Generator: This tool is useful for creating a configuration file from a template, but again not for automatically creating configuration files, and needs manual intervention.
4) Excel Macro: It seems that some people have achived to automatically create configuration files with using an excel macro, but we could not find a procedure or tip of how to achieving this.
5) Pearl or TCL/TK Script: Again since we are not software developers but from networking field, it is difficult to achieve a working form of this scripts or codes due to to lack of documentation and development experience.
So our problem comes down to creating a template from a sample configuration, and creating bulk configuration files from the template. Is there a specific tool or procedure to achive this purpose?
Thanks in Advance,
Best Regards,

Hi,
Try this one http://www.gen-it.net
Regards,
Stuart

App-V: A Configuration Template for Deploying to Stateless RDS Clients on Citrix Published Desktops with Citrix UPM for Profile Management

Please Vote if you find this to be helpful!
App-V: A Configuration Template for Deploying to Stateless RDS Clients on Citrix Published Desktops with Citrix UPM for Profile Management
Just posted this to the wiki:
http://social.technet.microsoft.com/wiki/contents/articles/25318.app-v-a-configuration-template-for-deploying-to-stateless-rds-clients-on-citrix-published-desktops-with-citrix-upm-for-profile-management.aspx

I would not recommend this and keep the package cache and the client on the same non-persistent drive and enable the Shared Content Store. If you separate the cache and the App-V client they could get out of sync and strange behaviour can occur.
You can use a temporary local profile with Citrix UPM or UE-V and specify what to roam/save.
You can use the Shared Content Store so packages will stream over the network. When the user logs on there is a publishing phase where shortcuts etc are created for the user, this will take some time.
Are you using the App-V full infrastructure?
Are you using a boot disk, partition or PXE in combination with PVS?

Configuration Template for SRP 521W

Hello all,
Does anyone have a recommnedation for creating a configuration template for the SRP521W? I can use the Admin-->Backup Config to get a xxx.cfg file, but I cannot edit it with notepad++.
Also, i know the config can be view via view-source:http://ipaddr/admin/config.xml, but how would I load a modified copy of this back to the router?
Thanks in advance for your time!
Philip

Hi Philip,
You can load XML configurations on to the SRP using a number of different methods.
Firstly, make sure that your XML is properly formatted as follows. Configuration files can include as much or as little configuration as you need.
<?xml version="1.0"?>
Add your configuration here
Provisioning Methods
1. Resync URL
You can use the resync URL to command the SRP to collect a new configuration from a specified location. The SRP can use TFTP, HTTP or HTTPS to collect the defined configuration. Once you have created your configuration file and loaded it to a TFTP or web server, construct a URL as follows and paste it in to your browser.
http://:/admin/resync?&xuser=admin&xpassword=
For example:
http://192.168.15.1/admin/resync?tftp://192.168.15.100/myconfig.xml&xuser=admin&xpassword=admin
2. Provisioning URL configuration
As an alternative to the above, it is also possible to configure the SRP500 with a provisioning URL via the web GUI. In this case, take the configuration file URL and use it configure the "Profile Rule" configuration field, which may be found on the Voice > Provisioning page.
3. Push URL
Use an application like curl to post the XML file directly to the SRP IP address. For example:
curl -k -d @myconfig.xml http://192.168.15.1/admin/config.xml&xuser=admin&xpassword=admin

Updated! App-V: A Configuration Template for Deploying to Stateless RDS Clients on Citrix Published Desktops with Citrix UPM for Profile Management

I've updated my App-V Startup script that I use. The new version includes Event Logging as well as detailed logging, and its in PowerShell finally)
Check out the wiki!
http://social.technet.microsoft.com/wiki/contents/articles/25318.app-v-a-configuration-template-for-deploying-to-stateless-rds-clients-on-citrix-published-desktops-with-citrix-upm-for-profile-management.aspx

I've updated my App-V Startup script that I use. The new version includes Event Logging as well as detailed logging, and its in PowerShell finally)
Check out the wiki!
http://social.technet.microsoft.com/wiki/contents/articles/25318.app-v-a-configuration-template-for-deploying-to-stateless-rds-clients-on-citrix-published-desktops-with-citrix-upm-for-profile-management.aspx

SMD Configuration Error - SSO - for PI 1.1 Ehp1

Hi All,
When I am running the Managed System Configuration wizard for PI 7.1 Ehp1 system I am getting an error in SSO configuration step. My Solution Manager is on SP21. It says "sap.com/com.sap.xi.mdtmdt".I have checked for this. In PI 7.1 Ehp1, I think it has been renamed to sap.com/com.sap.xi.mdt2**mdt. So it is throughing the error. Can I do this manually.
The SSO ticket Certificate <OU=J2EE,CN=SMP> has been successfully imported into ticket Keystore
The ticket ACL has been updated with : sys=SMP,000 iss=OU=J2EE,CN=SMP dn=OU=J2EE,CN=SMP
The Authentication template for component sap.com/tcmonitoringsysteminfo*monitoring has been set to ticket
The Authentication template for component sap.com/tcmonitoringsysteminfo*sap_monitoring has been set to ticket
The Authentication template for component sap.com/com.sap.xi.directory*dir has been set to ticket
The Authentication template for component sap.com/com.sap.xi.rwb*rwb has been set to ticket
SSO Setup for XI apps failed : a problem occured while changing the authentication templates
SSO setup failed : error while updating login modules : No such policy configuration: sap.com/com.sap.xi.mdt*mdt
The SSO ticket Certificate <CN=SMP> has been successfully imported into ticket Keystore
The Login Modules for validating SSO tickets were already installed
I have one more question. In one of the host the SMD Agent is already installed on Java 1.4.2. I have installed PI 7.1 ehp1 on the same VM server (on different Host), So in PI the SAP JVM is of 5.0. When I try to do the managed system configuration, it is not completing the configuration. When I connect it to the SMD with sap JVVM 5.0, it is working fine.
Do I need to have 2 SMD agents on the same host as the java version is changed?
Thanks,
Ramu J

Hi
I resolve this issue changing the roles of the user what access the UME Backend...
In my case... SPML with role SPML_FULL_ACCESS.
Add the Role Administrator and run the step again.
Note 1647157 - How to Set up Access to the SPML Service on AS Java

Oracle VM and Oracle VM Template for Enterprise Manager Cloud Control 12c M

Hello!
After installation of *"Oracle VM 3.1.1 Media Pack v1 for x86_64 (64 bit)"* to bare hardware
can I install Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack ?
Is it the wrong plan ?
What to do if I need to set VLAN №1 ? (according note of installer I have to choose number between 2 and 4094 )
Thanks and regards,
Pavel
Edited by: Pavel on Jul 30, 2012 5:01 AM

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1

Hello
I download Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1
I was checking the structure and I found this
[oracle@em12c bin]$ cd /u01
[oracle@em12c u01]$ ls
app lost+found OracleHomes oracle-template.sh scripts
[oracle@em12c u01]$ cd OracleHomes/
[oracle@em12c OracleHomes]$ ls
checkpoints db11g Middleware
[oracle@em12c OracleHomes]$ pwd
/u01/OracleHomes
[oracle@em12c OracleHomes]$ cd db11g/
[oracle@em12c db11g]$ ls
admin cfgtoollogs checkpoints diag fast_recovery_area oradata product
[oracle@em12c db11g]$ cd ..
[oracle@em12c OracleHomes]$ cd Middleware/
[oracle@em12c Middleware]$ ls
[oracle@em12c Middleware]$
The Database has all binaries but Middleware is empty
Same body knows about this issue.
Regards

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Oracle Sesame Adaptater - missing template for creation of a new SAIL repo.

Hi,
I'm trying to deploy the Sesame Adaptater on my TOMCAT server.
At the point 8.9 of the doc ( http://docs.oracle.com/cd/E18283_01/appdev.112/e11828/sem_sesame.htm#BABFFEFA) I'm suppose to type in the sesame console the following comand :
"create oracle."
I got this error :
ERROR : No template called Oracle found in C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates
By reading the Sesame doc and according to this page (http://www.openrdf.org/doc/sesame2/users/ch07.html) I suppose that I have to add in the "C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates" directory a file based on this template :
# Sesame configuration template for a main-memory repository
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#>.
@prefix rep: <http://www.openrdf.org/config/repository#>.
@prefix sr: <http://www.openrdf.org/config/repository/sail#>.
@prefix sail: <http://www.openrdf.org/config/sail#>.
@prefix ms: <http://www.openrdf.org/config/sail/memory#>.
[] a rep:Repository ;
rep:repositoryID "{%Repository ID|memory%}" ;
rdfs:label "{%Repository title|Memory store%}" ;
rep:repositoryImpl [
rep:repositoryType "openrdf:SailRepository" ;
sr:sailImpl [
sail:sailType "openrdf:MemoryStore" ;
ms:persist {%Persist|true|false%} ;
ms:syncDelay {%Sync delay|0%}
Do anyone have the correct template ?
I didn't find any other thread about this problem, so I supose it's an easy issue to solve, but the Semantic Technologies are totally new for me.
Arthur

I finally find the answer to my question. The template used in the tutorial is present in the sesame adapter.
I just had to extract the files into the "sdordfsesame.jar", the template is locate in "sdordfsesame.jar/org/openrdf/console/oracle.ttl".
After adding the "oracle.ttl" to the correct directory, it's work fine.
Arthur

Template for print

Hello, colleagues!
I would like to set default template for printing.
Admin guide says:
4. Configure the Flash print and export templates:
a. Select the Default Template from the drop-down list to the left.
Additional Flash print templates can be implemented using the add-on manager.
page 41 (pdf:51)
There is option browsing for files in add-on manager, file with template for print named: add-on-template.zip, after trying to load this file manager says:
floder name must begin with the prefix 'add-on'
I can't add my own template, so I can't choose my own template as default in Print/Export Preferences.
Thanks.
Best regards.
Alexander.

Hi Alex,
Do you mean that they are not available to select or that the settings from your template are not being read?
I browsed t hrough some project notes from a recent project and I noticed a bug where the templates were not being imported correctly. You need to check your template before import and then do the same afterwards - this will tell you if the issue is occuring.
If it is then raise an OSS message.
Best regards,
Luke

How to configure simultanous access for 11i application

Hi All
We have one existing 11i application instance on node grid1.In which we start the servicess from apps user.
In our same we want another node for the same application in which we will start the servicess from another user(merge)
For that we perfrom the following steps
1.Copy the APPL_TOP,COMMON_TOP,ORA_TOP(8.0.6,iAS) from node "GRID1" to diffrent node "GRID2"
2 configure the GRID2 node using adcfgclone.pl utility(we have configure new node for WEB and FORM Server)
3 We perfrom the modification in the following files ON GRID2 .
i Identify 'FNDNAM=apps' statement in $FND_TOP/secure/<context>.dbc
and replace with 'FNDNAME=merge' to connect to MERGE schema instaed of APPS.
ii. Go to the last line of $APACHE_TOP/jserv/etc/zone.properties file
and identify 'schema=APPS' statement and change it to 'schema=MERGE'
iii. Identify below lines in $APACHE_TOP/modplsql/cfg/wdbsvr.app file
password = apps
     username = apps
     document_table = APPS.fnd_lobs_document
and replace with modified below lines
password = merge
     username = merge
     document_table = MERGE.fnd_lobs_document
6. For redirecting user's request to new Application Server server, we
changed the following 4 system profile options with proper URL and port
at responsibility level only for the responsibilities,
which we use for Merge views.
Profile Options
     Application Framework Agent
     Applications JSP Agent
     Applications Web Agent
     Apps Servlet Agent
When we are able to start the services on GRID2 node,but at the time of login we are getting invalid user name/ passwd error
Please let us know is there any way to access application other than apps user
Regards
Sohail

well thank you very much .I know how to define a DataSource inside Weblogic Server.
But i am confused over one issue
When We are going to use Container Managed EntityManager inside the SessionBean the persistence.xml file looks like this
*<persistence>*
*     <persistence-unit name="RamsEJBPU" transaction-type="JTA">*
*          <jta-data-source>myJtaDataSource</jta-data-source>*
*     </persistence-unit>*
*</persistence>*
But in some cases it looks like as shown below :     <persistence-unit name="RamsEJBPU" transaction-type="resource-local">
     <provider>org.hibernate.ejb.HibernatePersistence</provider>
                  <properties>
               <property name = "hibernate.connection.driver_class" value = "oracle.jdbc.driver.OracleDriver"/>
               <property name = "hibernate.connection.url" value = "jdbc:oracle:thin:@localhost:1521:orcl"/>
               <property name = "hibernate.connection.username" value = "CHENNAISPAT"/>
               <property name = "hibernate.connection.password" value = "CHENNAISPAT"/>
            </properties>
     </persistence-unit>
</persistence>Can you please tell me why is it so ??

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Data Mapping Templates for NON-RTA Systems

Hi all,
I'm designing n extractor for my NON-SAP System.
I've been reading the Appendix B: Data Mapping Templates for Non-RTA Systems from Configuration Guide - SAP GRC AC 5.3.
I have a couple of questions regarding the size of two fields in table ACTION PERMISSION OBJECTS TEMPLATE
Is correct the size that the documents says about fields:
ACTION (document says it's 20 but in other tables is 50)
PERMISSION (document says it's 10 but in other tables is 100
ACTVT (document says it's 10but in other tables is 50)
Thank you in advanced.

Hi Luis,
Yeah i will follow the recomendations but i'm updating some files to RAR and i've seen another kind of inconsistency such as in the table User File Template. Recomendation says that both FNAME field and LNAME field are 50 size each one but in my case i can update a FNAME 51 size and a LNAME 49, i mean between FNAME and LNAME it's 100 size.
Cheers.

CONFIGURATION OF TEMPLATES FOR IPCC AGENTS

Similar Messages

Maybe you are looking for