Configuration of the Knowledge Warehouse IKS

First i created a user IKSSERVICE in the SAP system with role SAP_KM_KW_RFC_CPIC_USER.
Now i want to setup this IKS administrative user by starting the page http://<server>:<port>/SAPIKS2/jsp/adminChgPasswd_html.jsp on the J2EE server.
The result is the page showAdmin.sap that is showed in display mode, so without the possibility to change the IKS administrative user.
On the first line of the page the message "You must have administration permissions to change the parameters" is displayed.
What user or role do i need to use to change the IKS administratve user succesfully ?
Regards Jack

Solved. Had to create the role KW_ADMINISTRATOR in the J2EE engine and then assigned it to the administrator user J2EE_ADMIN.
After that it was possible to do the configuration with the user J2EE_ADMIN.
regards Jack

Similar Messages

User authentication in knowledge warehouse 4

Hi all,
I am not sure whether I am posting into the right forum regarding my question but I'll go ahead anyhow :).
I need to add a link to the knowledge warehouse browser gui that calls a JSP. This JSP will finally call a function module on the R/3 KW, but needs to authenticate the user before being allowed to make the call.
I am wondering how user and password information are stored/maintained in a knowledge warehouse browser context. They are definitely not stored in a cookie, as far as I found out. Does anyone know if they can be found and accessed somehow?
This is a vital question for the project I am working on and therefor I am very thankful for any input on this!
With best regards,
Helga

Hallo Klaus,
thanks for helping me out on this. I guess I should have posted it to the Java Programming forum what I will do now.
I am curious if I will get a reply from out of the "dark inhouse channels" ;-).
Thanks again!
Helga

User authentication (JSP) with knowledge warehouse 4

Hi all,
I am not sure whether I am posting into the right forum regarding my question but I'll go ahead anyhow :).
I need to add a link to the knowledge warehouse browser gui that calls a JSP. This JSP will finally call a function module on the R/3 KW, but needs to authenticate the user before being allowed to make the call.
I am wondering how user and password information are stored/maintained in a knowledge warehouse browser context. They are definitely not stored in a cookie, as far as I found out. Does anyone know if they can be found and accessed somehow?
This is a vital question for the project I am working on and therefor I am very thankful for any input on this!
With best regards,
Helga

Hello Helga,
does this Article helps you:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/enabling%20single%20sign-on%20from%20sap%20j2ee%20engine%20to%20non-sap%20java%20applications.article">Enabling Single Sign-On from SAP J2EE Engine/EP to Non-SAP Java Applications</a>
Regards
Gregor

Knowledge warehouse is not working

hi,
with the link
http://SERVER:50000/SAPIKS2
Of course i have put in the right value for our server.
i only receive a EMPTY page.
Can anybody tell me what is wrong here ? I want to use the 'knowledge warehouse'.
best reg, Martin

The config url Knowledge Warehouse on http is :
http://SERVER:50000/SAPIKS2/chgApplConfigParams.sap
If you have any problems, post me.
rewarding for help answer.

Some questions regarding SAP Content Server / Knowledge Warehouse

Hi,
we are thinking about SAP Knowledge Warehouse which needs the SAP Content Server.
Is it possible to install the Conent Server together with a Solution Manager System where we would like to use the Knowledge Warehouse functionallity? The Conent Server needs his own database instance. Is it possible to add it to the actually installed Maxdb for the Solution Manager?
What is the actual version of the Content Server 6.30 or 6.40? Is there no 7.0? What about the future of the Content Server?
We are running Solution Manager 7.0 EHP1. Is it possible to install the content server on the same machine? What about the database? Can I use the already installed DB of solution manager?
Thanks ahead
Bernd
Edited by: Bernd Speckmann on Apr 26, 2010 10:55 AM

Is it possible to install the Conent Server together with a Solution Manager System where we would like to use the Knowledge Warehouse functionallity?
If you have enougth resourses why not?
The Conent Server needs his own database instance.
This is are not true, you can install content server without MAX DB.
Is it possible to add it to the actually installed Maxdb for the Solution Manager?
Again why not, if you have correct max db version per PAM for content server (you need 2 DB instance second are for cache server) check pam for NW 7.0 (the PDF document) you find information about content server requirements here and in page --> Database components on same NW 7.0 PAM.
What is the actual version of the Content Server 6.30 or 6.40?
6.40 are last version,
We are running Solution Manager 7.0 EHP1. Is it possible to install the content server on the same machine?
Your OS are ? I'm install cont server 6.40 on system where NW 7.0 are installed without problem, do not know about NW EHP1 .... Good backup are start point .....
Regards.

Urgently I want to configure the knowledge search

Hello All
I am working on CRM 5.0 IC WebClient.
I want to configure the knowledge search, I want to know if the knowledge data base is a separate data base should be integrated with CRM or it is already there only need to be configured.
I want to know how data will be saved on this database.
Installing TREX is a must so I want to know if it is installed or not
If any documentation is available please mail me at [email protected]
Regards
Jacopo François

Hi Jacopo,
Please surf through this link.
http://help.sap.com/saphelp_crm40/helpdata/en/83/1668ce7f3411d6885d00008658acb2/content.htm
Regarding Trex installation, you may get the guide in service market place under CRM.
Best Regards,
Pratik Patel
<b>Reward with points!</b>

SAP Knowledge Warehouse - Error Page

Hello all. I'm want to use Knowledge Warehouse in web browser. Go to http://172.18.77.08:50000/SAPIKS2/jsp/adminShow.jsp and view :
An error occurred during processing of your request
Most common causes: Requested URL is wrong or incomplete; Requested content does not exist in the underlying backend system; Connection to the underlying backend system is incorrectly configured; User is working in the wrong context.
Contact the support service or try again later
Server Time: 6 Jun 2007 13:25
Request URL: http://portal:50000/SAPIKS2/jsp/adminShow.jsp
KW Context: TMP_IWB_TASK=DISPLAY RELEASE=700 LANGUAGE=EN
HTTP Error Code: 404
Servlet Name: jsp
Servlet Message: The requested resource /SAPIKS2/jsp/adminShow.jsp is not available
Can any body help me?

Hello Stefan Hewener! thanks for reply. I'm trying this URL http://172.18.77.08:50000/SAPIKS2/testApplConfigParams.sap and Configure the KW settings, but when i'm try Home page for KW http://172.18.77.08:50000/SAPIKS2/topNavigation.sap
i'm view
SAP Knowledge Warehouse - Error Page
An error occurred during processing of your request
Most common causes: Requested URL is wrong or incomplete; Requested content does not exist in the underlying backend system; Connection to the underlying backend system is incorrectly configured; User is working in the wrong context.
Contact the support service or try again later
Server Time:     14 Jun 2007 11:35
Request URL:     http://172.18.77.08:50000/SAPIKS2/topNavigation.sap
KW Context:     TMP_IWB_TASK=DISPLAY RELEASE=700 LANGUAGE=EN
HTTP Error Code:     500
Servlet Name:     FrontController
Servlet Message:     Object does not exist.
Java stack trace:     Object does not exist.
java.lang.IllegalArgumentException
at com.sap.kw.access.KwGetData.hasAuthority(KwGetData.java:3178)
at com.sap.kw.access.KwShell.hasAuthority(KwShell.java:3467)
at com.sap.kw.access.KwShell.addUser(KwShell.java:273)
at com.sap.kw.actions.AuthenticationFilter.doFilter(AuthenticationFilter.java:206)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:Unknown)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please if you know that me to do, help me.
Thanks And Regards! Sergo Beradze.

Knowledge Warehouse Workflow problem

Hello Experts,
I have a deal with Internal Knowledge Warehouse in Solution Manager.
My task is to make work 2 workflows "Approval" and "Copy Edit" for creation documents in 2 main project management transactions RMMAIN and SOLAR01 (document areas IWBASAP and IWBSOLAR).
I have configured without errors everything that I had found in trx SI24: maintain areas and organization plan, activate workflow engine and exact KM workflows.
These 2 workflow tasks TG 70000013 and TG 70000014 work Good! - I have tested them in trx SWUS.
Both areas configured in SI24_12 for APPROVE and COPY_EDIT.
Both authorizations roles (Z)SAP_KM_KW_ALL_AREAS_EDIT and (Z)SAP_KM_KW_ADMINISTRATOR have been configured properly.
BUT:
Creating/Changing document with statuses "For release" or "Copy editing" in RMMAIN or SOLAR01 DO NOT FIRE Workflow triggers TO_BE_RELEASED or COPY_EDITING (they are in Activated status!). And therefore workflows do not start. And no errors come on screen.
Thanx in advance,
Alexander

> I've had the same problem before, all my other files
publish just fine,
> but not
> the pictures in the Quiz KO. I typically have to
manually add them as Amy
> said, and have to make sure that they are in the same
folder and burn them
> to
> the cd, too. It is a pain!
The reason for this is that, since you have used a KO, the
images are not
imported into Authorware, They are referenced by a variable,
rather than
directly linked in a Display icon. Authorware does not know,
at the time of
packaging, which images you need so you have to tell it.
The best thing to do is place all your images in a subfolder
of the folder
that you have placed your development code, and then add that
folder to the
packaging process in One Button Publishing.
Steve
EuroTAAC eLearning 2007
http://www.eurotaac.com
Adobe Community Expert: Authorware, Flash Mobile and Devices
My blog -
http://stevehoward.blogspot.com/
Authorware tips -
http://www.tomorrows-key.com

Sap knowledge warehouse 7.0

Dear all,
i m new in SAP Knowledge warehouse. i implemented SAP KW7.0 and now i want to add some personal docs loke word/excel or ppt in content server.
Plz guide me for doing the same.
Regards.
Rakesh Thakkar.

Hello Rakesh,
well, there's a lot of things to do, here a short summary:
you have to configure the system according to the SAP KW configuration guide (http://service.sap.com/instguides).
you need the sap templates, the relevant transports are mentioned in the guide, without them, you can't work.
Then you have to create a context, in ta sii1 (change documentation), you have to switch to the context you created, create a folder, and then, within the newly created folder, you can create documents.
Hope that helps, kind regards,
Carl

How to Troubleshoot why data is not moving over into the Data Warehouse after Sql Server Agent Job Run

Hello,
Here is my problem:
Data was imported into the staging area. After resolving some errors and running the job, I got the data to move over to the next area. From there, data should be moving over into the DW. I have been troubleshooting for hours and cannot reslove this
issue. I have restarted the sql service services, I have ran a couple packages manually, and the job is running successfully.
What are some reasons why data is not getting into the data warehouse? Where should I be looking?
Your help is greatly appreciated!!

Anything is possible.
So, just to reiterate, running the job manually works, running the scheduled job does not result in errors neither data arriving to the DW, right? And it used to, correct?
If so, the 1st step would be to examine the configuration(s). But not before you inspect the package. Do you have an ability to export it to a file system and open in BIDS?
Arthur My Blog

Solution Manager instead of Knowledge Warehouse?

Hi!
We work today with Knowledge Warehouse (Version: 6200.600.144) to manage user guides and connect the user guides with R/3 via transactions. As we are upgrading SAP-GUI to 7.10 our version of KW stops to work with R/3. This means in the current situation that the person administering user guides in KW can not upgrade its GUI, which is unsustainable in the long run. It also means that KW does not work with our solution with Citrix/Metaframe.
Therefore think we should take hold of this and focus on the possibility of using Solman as a possible replacement for KW. Is it at all possible to manage user guides in Solman? Can Solman generate html pages? Can Solman make same bindings via R/3 with transactions as our version of KW?
We do not want to upgrade KW.
What are your recommendations if Solman is not an option?
Sincerely
Jesper Sandberg

Hi,
Pls hav a look into dis.
[http://help.sap.com/saphelp_smehp1/helpdata/en/4d/e41b12141f442786b0084d7842a99d/frameset.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/4d/e41b12141f442786b0084d7842a99d/frameset.htm]
Thx,
waseem

Upgrade OM 2012 to SP1 Beta - Version of SQL Server for the Operational Database and the Data Warehouse

Hello,
When I try to verify the prerequisites to upgrade my SCOM 2012 UR2 Platform to SP1 Beta, I have these errors :
The installed version of SQL Server is not supported for the operational database.
The installed version of SQL Server is not supported for the data warehouse.
But when I execute this query Select @@version on my MSSQL Instance, the result is :
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7600: ) (Hypervisor)
But
here, we can see that :
Microsoft SQL Server: SQL Server SQL 2008 R2 SP1, SQL Server 2008 R2 SP2, SQL Server 2012, SQL Server 2012 SP1, are supported.
Do I need to pach my MSSQL Server with a specific cumulative update package ?
Thanks.

These are the requirements for your SQL:
SQL Server 2008 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see
System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
Check the SQL server agent service and see whether it is set to automatic AND started. This got me confused at my first SP1 install as well. This is not done by default...
It's doing common things uncommonly well that brings succes.

Service Level Tracking Reports show no data from the data warehouse db.

Hi, I have some Service Level Tracking reports that will only show data from the last few days. If I select last month as the time frame, there is no data displayed. All of these reports have previously worked fine. Nothing to my knowledge
has changed, and it appears that the data is still being collected in the data warehouse database. Any thoughts would be greatly appreciated.

Is this meant for SCOM forum
https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Best practices for using the knowledge directory

Anyone know when it is best to store docs in the Knowledge Directory versus Collab? They are both searchable, but I guess you can publish from the Publisher to the KD. Anyone have any best practices for using the KD or setting up taxonomies in the KD?

Hi Richard,
If you need to configure dynamic pricing that may vary by tenant and/or if you want to set up cost drivers that are service item attributes, you should configure Billing Tables in the Demand Management module in 10.0.
The cost detail functionality in 9.4 will likely be changed to merged with the new pricing feature in 10.0. The current plan is not to bring cost detail into the Service Catalog module.

Publisher Content to the Knowledge Directory

Hello,
I want to publish a single portlets published content to the knowledge directory. Let's call the portlet 'Policy Info'
So I created a publisher crawler. Unfortunately, it would not let me drill down to the exact portlet. I only gave me a choice at the root level of all the portlets. (I don't want all publisher portlet content item to show up in the KD).
I tried to create a filter that would grab only info from that specific portlet. But the filter does not have a property to specify the portlet name. I can create a filter on each content item, but that means adding or deleting a filter every change.
Any ideas how to get the published content from 1 specific folder into the KD?
Thanks,
V
Computers are like Old Testament gods; lots of rules and no mercy. ~Joseph Campbell

Vivek,
It should allow you to do so. You can drill down to the exact portlet folder and configure that folder in the Publisher Crawler.
Note: All root level folders are Hyperlinks, when displayed while creating a publisher crawler. Click on the root folder and navigate to your portlet folder.
Thanks,
Bharat
Bharat Karthik
[email protected]
http://www.eminenttech.com/

Configuration of the Knowledge Warehouse IKS

Similar Messages

Maybe you are looking for