Configuration of the TNSListener
Hello!
I am currently to install SAP Solution Manager with Oracle on the unix as a second SAP system on the same host.
I had problem during the phase "Install DBA tools".
I am just thinking to continue the old installation or to start from scratch.
If I would like to start from scratch, what are the steps and the order to reinstall the SAP and Oracle?
- reinstall Oracle software
- reinstall SAP
What is better for the new installation of 2 SAP systems with Oracle on the same host on unix?
- TNSLISTENER with the same Port
- TNSLISTENER with two different Ports
Should after the installation some adjustments be done for the following files:
- listener.ora
- tnsname.ora
- sqlnet.ora
Thank you very much indeed!
regards
Thom
Hello Thom,
see please the following notes:
98252 - Installing two Oracle databases on a host
21960 - Several instances/systems on one UNIX computer
See also this thread:
Re: Oracle installation on AIX with existing instances
best regards
Baran
Similar Messages
-
SAP DMS - How to do an external DMS configuration for the existing system ?
Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
InduThanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu -
I originally posted this question to the community section and was advised to post it here. Please bear with me as this will be a long post. I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
taken and the results of several diagnostic tools and logs.
I have a Sony VAIOS VPCEBB33FM lap top since 2011. I have had this issue on an off for a long time. I'm at my wit's end. Any new insights or suggestions would be greatly appreciated.
Scenario Details
1) Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
2) I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
3) Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
4) Once in a while, the built-in wireless adapter is not found and I have to reinstall the driver. Also the diagnostic tool has had to reset my adapter on an increasing basis.
5) I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop. Even though I've been online on an infrequent basis it worked just fine for a while. Now that
I've been online a bit more I'm having the same issues again.
Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
1) Restarting my adapter
2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
3) Using the IP Config in Command Prompt
ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew
4) Using the NetSh reset in Command Prompt and restarting my laptop
netsh int ip reset c:\resetlog.txt
netsh winsock reset
ipconfig /flushdns
[restart laptop]
5) Configuring the TCP/IP in several settings
Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
I have used the following settings:
a) Obtain an DNS server address automatically
b) OpenDNS
208 67 222 222
208 67 220 220
c) Google DNS
8 8 8 8
8 8 4 4
6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014. It still did not resolve the issue. My laptop
manufacturer as not come up with an driver update for my adapter since 2010. I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
instead and frankly it didn't make much of a difference when I did it the first time.
7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
Computer Browser [changed from manual to automatic]
DHCP Client [already set to automatic]
DNS Client [already set to automatic]
Network Connections [already set to automatic]
Network Location Awareness [changed from manual to automatic]
Remote Procedure Call (RPC) [already set to automatic]
Server [already set to automatic]
TCP/IP Netbios helper [already set to automatic]
Workstation [already set to automatic]
...and I'm still having DNS issues.
My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
Avast Anti-Virus with Microsoft Network Firewall. I've had DNS issues with both anti-virus/firewall set ups.
Below are the results from the diagnostics and tests that I've ran.
Windows Network Diagnostics
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
Contact your network administrator or Internet service provider (ISP) Completed
Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
Details about network adapter diagnosis:
Network adapter Wireless Network Connection driver information:
Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
Manufacturer . . . . . . . . . : Intel Corporation
Provider . . . . . . . . . . . : Intel
Version . . . . . . . . . . . : 13.2.1.5
Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
Inf File Date . . . . . . . . . : Monday, June 14, 2010 9:05:44 AM
Section Name . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Informational Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2015-03-07 19:57:14-186
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 22 item(s) total, 22 item(s) displayed
BSSID BSS Type PHY Signal(dB) Chnl/freq SSID
60-02-92-C6-D3-E8 Infra <unknown> -62 11 HOME-C7D4-2.4
60-02-92-A1-75-E0 Infra <unknown> -58 6 HOME-B917-2.4
00-1D-D5-D5-34-F0 Infra <unknown> -73 6 HOME-34F2
60-02-92-A1-75-E1 Infra <unknown> -58 6 (Unnamed Network)
06-1D-D5-D5-34-F0 Infra <unknown> -78 6 xfinitywifi
C4-27-95-C9-C4-2D Infra <unknown> -57 1 HOME-C42D
02-1D-D5-D5-34-F0 Infra <unknown> -74 6 (Unnamed Network)
00-0D-97-07-E0-79 Infra g -75 6 (Unnamed Network)
00-1D-CF-2A-44-C0 Infra <unknown> -86 6 HOME-44C2
02-1D-CF-2A-44-C0 Infra <unknown> -86 6 (Unnamed Network)
F8-E4-FB-3C-87-A2 Infra <unknown> -89 6 YVNM7
06-1D-CF-2A-44-C0 Infra <unknown> -87 6 xfinitywifi
0C-F8-93-7A-13-50 Infra b -87 6 PKennedy
06-F8-93-7A-13-50 Infra b -89 6 xfinitywifi
02-F8-93-7A-13-50 Infra b -87 6 (Unnamed Network)
E0-88-5D-C8-A9-DC Infra <unknown> -80 1 HOME-A9DC
E2-88-5D-C8-A9-DD Infra <unknown> -79 1 (Unnamed Network)
16-CF-E2-43-0B-30 Infra <unknown> -88 1 xfinitywifi
60-02-92-F0-A8-C0 Infra <unknown> -90 11 HOME-96A6-2.4
60-02-92-C6-D3-E9 Infra <unknown> -63 11 (Unnamed Network)
02-1D-D4-EB-87-00 Infra <unknown> -88 11 (Unnamed Network)
06-1D-D4-EB-87-00 Infra <unknown> -88 11 xfinitywifi
Connection History
Information for Auto Configuration ID 1
List of visible networks: 13 item(s) total, 13 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 63 Yes HOME-C7D4-2.4
Infra <unknown> Yes 70 Yes HOME-B917-2.4
Infra <unknown> Yes 43 Yes HOME-34F2
Infra <unknown> Yes 70 Yes (Unnamed Network)
Infra <unknown> No 40 Yes xfinitywifi
Infra <unknown> Yes 71 Yes HOME-C42D
Infra g No 43 Yes (Unnamed Network)
Infra <unknown> Yes 28 Yes HOME-44C2
Infra <unknown> Yes 20 Yes YVNM7
Infra b Yes 21 Yes PKennedy
Infra <unknown> Yes 33 Yes HOME-A9DC
Infra <unknown> Yes 35 Yes (Unnamed Network)
Infra <unknown> Yes 16 Yes HOME-96A6-2.4
List of preferred networks: 3 item(s)
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Profile: HTC Portable Hotspot 9F50
SSID: HTC Portable Hotspot 9F50
SSID length: 25
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Profile: belkin.332
SSID: belkin.332
SSID length: 10
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Information for Connection ID 1
Connection started at: 2015-03-07 19:57:14-186
Auto Configuration ID: 1
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 06-1d-d5-d5-34-f0
Security and Authentication
Configured security type: Open
Configured encryption type: None
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: No
Multicast key received: No
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 2068
Ndis Tx: 2543
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 3954
Rx failure: 0
Tx success: 537
Tx failure: 4
Tx retry: 2
Tx multiple retry: 2
Tx max lifetime exceeded: 0
Tx ACK failure: 18
Roaming history: 0 item(s)
InformationalDiagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Result of diagnosis: There may be problem
Network Connection details from Command Prompt (some info hidden for security reasons)
Connection-specific DNS Suffix:
Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
Physical Address: 00-23-15-54-19-B8
DHCP Enabled: Yes
IPv4 Address: 192.168.X.XX
IPv4 Subnet Mask: 255.255.XX.X
Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
Lease Expires: Saturday, March 07, 2015 8:24:44 PM
IPv4 Default Gateway: 192.168.X.X
IPv4 DHCP Server: 192.168.X.X
IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
IPv6 Default Gateway:
IPv6 DNS Server:
Results of Ping and Trace Route in Command Prompt
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>ping www.youtube.com
Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
Request timed out.
Request timed out.
Ping statistics for 173.194.121.6:
Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
Minimum = 19ms, Maximum = 24ms, Average = 21ms
C:\Windows\system32>ping 74.125.239.34
Pinging 74.125.239.34 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
Request timed out.
Ping statistics for 74.125.239.34:
Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
C:\Windows\system32>ping www.hotmail.com
Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
Request timed out.
Request timed out.
Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
Ping statistics for 65.55.157.204:
Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
Minimum = 111ms, Maximum = 1537ms, Average = 824ms
C:\Windows\system32>ping 207.46.11.236
Pinging 207.46.11.236 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 207.46.11.236:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Windows\system32>tracert www.youtube.com
Tracing route to youtube-ui.l.google.com [173.194.121.5]
over a maximum of 30 hops:
1 19 ms 13 ms 17 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 13 ms 13 ms 27 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
3 20 ms 26 ms 21 ms he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
4 18 ms 34 ms 22 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 19 ms 18 ms 18 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6 35 ms 18 ms 18 ms 209.85.249.217
7 21 ms 19 ms 19 ms 72.14.233.93
8 * * * Request timed out.
9 * 2509 ms 677 ms iad23s25-in-f5.1e100.net [173.194.121.5]
Trace complete.
C:\Windows\system32>tracert 74.125.239.34
Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
over a maximum of 30 hops:
1 54 ms 23 ms 12 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 22 ms 19 ms 17 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 19 ms 19 ms 18 ms he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
4 18 ms 18 ms 18 ms he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
5 19 ms 18 ms 22 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6 22 ms 36 ms 19 ms 209.85.249.217
7 26 ms 23 ms 25 ms 209.85.143.112
8 * * * Request timed out.
9 * * * Request timed out.
10 972 ms * * 216.239.51.97
11 148 ms 97 ms 95 ms 216.239.46.241
12 324 ms 130 ms 432 ms 209.85.246.252
13 * * * Request timed out.
14 1403 ms 101 ms 126 ms nuq04s19-in-f2.1e100.net [74.125.239.34]
Trace complete.
C:\Windows\system32>tracert www.hotmail.com
Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
over a maximum of 30 hops:
1 13 ms 13 ms 25 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 13 ms 15 ms 13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 20 ms 19 ms 17 ms he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
4 17 ms 20 ms 20 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 17 ms 18 ms 38 ms as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
6 18 ms 18 ms 36 ms ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
7 * * * Request timed out.
8 * 2191 ms 35 ms ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
9 * * * Request timed out.
10 * * * Request timed out.
11 86 ms 84 ms 84 ms ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
12 86 ms 86 ms 87 ms ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 87 ms 84 ms 85 ms origin.by173w.bay173.mail.live.com [65.55.157.144]
Trace complete.
C:\Users\C.Cunningham>tracert 207.46.11.236
Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
over a maximum of 30 hops:
1 16 ms 16 ms 19 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 18 ms 13 ms 13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 21 ms 19 ms 21 ms he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
4 18 ms 21 ms 18 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
Results of Intel WiFi Manual Diagnostics
Test Name Test Result Test Summary
Hardware Test Passed Wireless Hardware is enabled
Driver Test Passed Diver is loaded. NETwNs64 Version 13.3.0.24
Radio Test Passed Radio is ON
Scan Test Passed There are 25 Networks available to connect
Association Test Passed Associated
Authentication Test Passed Authenticated
Signal Test Passed Signal Quality: Poor
Ping Test Failed No Reponse: default gateway, DHCP server
I hope this information is enough to get to the root of this problem once and for all. Please let me know if you any other information such as event logs or statistics.
Thanks in advance.Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
#Event Source Time
Error Severity Domain
User Description
45 EvtEngine
3/8/2015 20:40 Success
Connection SYSTEM
iAMT - Failed to read Windows Events Log
46 S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Getting List of adapters.
47 S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Intel adapter(s) found.
156 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
157 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
158 S24EvMon
3/8/2015 20:47 Error
Driver SYSTEM
AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
159 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
160 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
161 S24EvMon
3/8/2015 20:47 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
162 S24EvMon
3/8/2015 20:47 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -77
163 S24EvMon
3/8/2015 20:49 Information
TCP/IP SYSTEM
VoIP: Got link down - deleting flows .
164 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
165 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
166 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
167 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
168 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
169 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
170 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
171 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
172 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
173 S24EvMon
3/8/2015 20:49 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
174 S24EvMon
3/8/2015 20:49 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -81
175 S24EvMon
3/8/2015 20:50 Information
Driver SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
176 S24EvMon
3/8/2015 20:50 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
177 S24EvMon
3/8/2015 20:50 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
178 S24EvMon
3/8/2015 20:50 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -80
179 S24EvMon
3/8/2015 21:03 Information
Driver SYSTEM
RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
186 S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
187
S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31) -
What configuration of the new macbook pro do I need to run FCS 3 without choppy playback.
Yep, just wondering what configuration of the new macbook pro do I need to run FCS 3 without choppy playback or lagging. I'm thinking about the 7200rpm, 2.2ghz, antiglare, 4gb ram, with 1gb GPU graphics card configuration
Nothing wrong with the computer. Playback is dependent on the media and the drives.
-
Feature Request: Export and Import all or part of vCenter configuration from the GUI
One of the challenges we face is how to recover a large vCenter to a different VM, without having to restore any databases or use vCenter VMs and databases on replicated storage. We currently have a PowerCLI based process for exporting vCenter configurations - vCenter settings, roles/privs, alarm definitions, datacenters/clusters/hosts - to an XML file, which can then be used to import that vCenter configuration into a recovery vCenter. Three part process - export the vCenter configuration, import the settings and structure (datacenters, clusters, alarms), then import the hosts. This last step pulls in the hosts once by one from the original vCenter, complete with their running VMs and once all hosts in a cluster are imported creates the required Resource Pools and moves the VMs in to them. A subsequent script moves all the VMs into appropriate blue folders based on their CMDB classification/OS.
The above process is OK, but has a number of faults:
It's all or nothing for a migration, unless there is some serious editing of the XML dump to extract, for example, a specific datacenter or cluster, which could if incorrectly done result in configuration issues, hosts not being imported, etc.
It can't (at least not in vc4.x) migrate dvSwitches. If we have those in a datacenter, we're going to have to reconfigure the hosts and VMs back onto conventional vSwitches
We'd really like to see a native tool built in to vSphere Client or the Web Client that will allow all or part of a vCenter configuration to be exported to an XML or other flat file and then imported into another vCenter in one easy step, taking running VMs, dvSwitches - the lot. In the same way you can export host and vCenter logs with a few clicks, it should be possible to do something similar for vCenter configurations. This would be useful for a number of things - vCenter recovery, vCenter upgrade, individual datacenter or cluster migration.I got the answer: http://forum.java.sun.com/thread.jspa?threadID=577129
-
Install and configuration on the SharePoint server 2007 issue
Hi All,
I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
Please check the Edited install.bat file and error log.
Install.bat
set _my_datetime=%date% %time%
@echo on
echo Begin Installation at %_my_datetime%
echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
@echo off
@SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
@SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
@SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
@SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
@SET SITEURL="http://sharepoint7:80/sites/DCADC"
@SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
REM cd $(ProjectDir)
%GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
pushd %TEMPLATEDIR%\features
Echo Deactivating LiveCycle Connector feature with WSS
%STSADM% -o deactivatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
Echo Deactivating LiveCycle Workflow feature with WSS
%STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
Echo Uninstalling LiveCycle Connector with WSS
%STSADM% -o uninstallfeature -filename LiveCycle\feature.xml -force
Echo Uninstalling LiveCycle Workflow with WSS
%STSADM% -o uninstallfeature -name LiveCycle/Workflow -force
popd
Echo Copying source files to WSS \TEMPLATE directory
xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
Echo Copying Feature Resource files to WSS 12\Resources directory
xcopy Resources %RESOURCESDIR% /e /y /i
Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
pushd %TEMPLATEDIR%\features
Echo Installing LiveCycle Connector with WSS
%STSADM% -o installfeature -filename LiveCycle\feature.xml -force
Echo Installing LiveCycle Workflow with WSS
%STSADM% -o installfeature -name LiveCycle/Workflow -force
Echo Activating LiveCycle Connector with WSS
%STSADM% -o activatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
Echo Activating LiveCycle Workflow with WSS
%STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
popd
Echo Restarting IIS worker process
IISRESET
set _my_datetime=%date% %time%
@echo on
echo End Installation at %_my_datetime%
@echo off
Error Log
E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27
Begin Installation at Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
"Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Deactivating LiveCycle Connector feature with WSS
Operation completed successfully.
Deactivating LiveCycle Workflow feature with WSS
Operation completed successfully.
Uninstalling LiveCycle Connector with WSS
Operation completed successfully.
Uninstalling LiveCycle Workflow with WSS
Operation completed successfully.
Copying source files to WSS \TEMPLATE directory
TEMPLATE\FEATURES\LiveCycle\Elements.xml
TEMPLATE\FEATURES\LiveCycle\Feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
TEMPLATE\IMAGES\LiveCycle\createPdf.png
TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
16 File(s) copied
Copying Feature Resource files to WSS 12\Resources directory
Resources\AdobeLiveCycleConnectorCore.de-DE.resx
Resources\AdobeLiveCycleConnectorCore.de.resx
Resources\AdobeLiveCycleConnectorCore.en-US.resx
Resources\AdobeLiveCycleConnectorCore.en.resx
Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
Resources\AdobeLiveCycleConnectorCore.fr.resx
Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
Resources\AdobeLiveCycleConnectorCore.ja.resx
Resources\AdobeLiveCycleConnectorCore.resx
9 File(s) copied
Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
App_GlobalResources\AdobeLiveCycleConnector.de.resx
App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
App_GlobalResources\AdobeLiveCycleConnector.en.resx
App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
App_GlobalResources\AdobeLiveCycleConnector.fr.resx
App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
App_GlobalResources\AdobeLiveCycleConnector.ja.resx
App_GlobalResources\AdobeLiveCycleConnector.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
App_GlobalResources\AdobeLiveCycleWorkflow.resx
18 File(s) copied
Installing LiveCycle Connector with WSS
Operation completed successfully.
Installing LiveCycle Workflow with WSS
Operation completed successfully.
Activating LiveCycle Connector with WSS
Operation completed successfully.
Activating LiveCycle Workflow with WSS
Operation completed successfully.
Restarting IIS worker process
Attempting stop...
Internet services successfully stopped
Attempting start...
Internet services successfully restarted
E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29
End Installation at Wed 08/22/2012 14:41:00.29
Waiting...
Regards,
Amol SahareThis might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138 -
Output type configuration for the Goods Receipt without the PO.
Hi,
I have a scenario whereby I want two Smartform(s) to fire from the MIGO Transaction. It is for Goods Recepit / others . Movement type '501'. Now we have created a new output type ZWE1 and configured in the system in the Transaction SPRO as follows:
Materials Management Inventory Management and Physical Inventory Output Detaremination Output types
ZWE1 is configured along with the Program and the Routine name but no Smartforms has been specified since there are two smartforms to be triggered via this Z program and via MIGO based on the material type which would be decided by the Program internally.
We have also configured the Material Output Determination and the Procedures fin the Ciondition Procedures for the Control data ME0001 mentioning this output type without the requirement code 173.
We have also configured the Output type ZWE1 with the Program name and the Routine in the link Assign Forms and Program
but somehow the Program still does not get trigerred.
Can anyone please tell me what is the reason for this and how this Prpblem should be addressed.
Any help on this front would be appreciated.
Suitable eward points would be awarded if Your solution works.
Thanks,
Regards,
Deepak.Answered.
-
I have changed the configuration of the firefox and I want to change it back
some days ago I have changed the configuration of the my Firefox to have a Firefox with higher speed. But after changing I found that the speed has became slower. I want to change the configuration back to its original setting. Please let me know if there is any way to do it.
may tanks for your helps.
MIMLINUXStart Firefox in [[Safe Mode]]. When you get to the [https://support.mozilla.com/en-US/kb/Safe+Mode#Safe_Mode_window Safe Mode window] , select '''Reset all user preferences to Firefox defaults''' and then '''Make Changes and Restart'''. You have to be very careful when a site tells you to change Firefox's settings. It may harm your Firefox.
-
When I try to reformat there is an error message about configurations with the pointing device
When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
I own a ipad mini and a iPod touch both configured on the same id
How do I ensure that my data on the ipad mail,notes,pics etc is not visible/accessible on the iPod touch when the iPod is connected to a wi fi connectionMail: do not have the same account loaded onto the two devices.
Photos: go into Settings->Photos & Camera->and turn off photo stream.
everything else, sign out of the Apple ID on the device you dont want to be visible.
good luck -
No sender agreement configured in the XI Integration Directory
Hi,
I am using MPA(MML) message format in XI scenario. My scenarios are R3->XI->Marketplace and Marketplace->XI->R3. The first scenario works fine with no problems where as when i try to post MML message from marketplace to XI system, i am seeing the "No sender agreement configured in the XI Integration Directory for the given message header:SenderParty=xxxx; ReceiverParty=; SenderService=xxxxx; ReceiverSerivce=xxx; Interface=xxxx; InterfaceNamespace=xxx;". I have created sender agreement for this secenario, and moreover i haven't this sender agreement in the xi cache. Please let me know if i am missing anything in the configuration.
Thanks & Regards
SrujThanks a lot for replies, but i have tried all these options but no luck. Does it need any additional configurtion to resolve this issue, i dont think this is cache issue, if that is the case after all steps which i have done should have fixed it. Please post your comments.
Once again thanks a lot for everyone.
Thanks & Regards,
Sruj
Message was edited by: Srujan Gogineni -
Document for configuration of the spend management in SAP E-Sourcing
Hi All
Is there any document for configuration of the spend management in SAP E-Sourcing 5.1
I have checked the RG section of the application and also all the documentation delivered as a part of the ESO software download
Unable to locate this, request you to redirect me to the link on the service marketplace from where I can download this, as far as I know, its not available there.
Currently I get the following error mentioned below for every menu option clicked under the spend and Compliance Tab
Error: The spend analysis environment is not ready to provide spend data
Request feedback
Regards
TridipHi Kamalakar
This is great piece of information, I checked the same place i found the following
Module Name
Auctions License
BOM License
Contracts License
Demand Aggregation License
Frictionless SRM Product License
Optimization License
Projects License
RFQuick License
RFx License
SRM Explorer License
XPress Print License
Do you think am missing the spend license, whats that called, request you to let me know
Regards
Tridip
Edited by: Tridip Chakraborthy on Apr 15, 2009 8:48 PM -
Dynamic configuration for the application
I'm a newbie and trying to evaluate JSF. I took part in a project with struts framework and i could say i don't like struts cause of some limitation and i suspect that JSF has the same limitation. First of all, there are JSP pages. I can't use JSP pages/templates stored somewhere else except web application. I'd like to store my templates in the database. This will give me ability to add/change/remove jsp page without redeploying war-archive. Yes, i can use exploded war-archive and add JSP pages straight into file system, but i don't like this way. Next problem is the configuration file like struts-config (faces-config, whatever). I have to write down all my navigation logic and beans mapping to this file and it's really annoying me. This kind of project requires dynamic configuration for the all web application and i'd like to add/change/remove pages, beans, actions without restarting/reconfiguring webapp. Today, I looked thru documentation and source code and found that FactoryFinder class could use my own classes but i'm not sure it will be enough for the dynamic configuration for the beans. In any case, it's a huge problem with the templates.
Right now i'm thinking about 1(one) JSP with XML/XSLT rendered HTML content and JSF for event/action handling. I mean, i'll use XSLT to render dynamic content and JSF for dispatching events. In that case i have to render form tag names in the HTML as JSF engine (i'm not sure if it possible). If it will take a lot of time to do this i'll have to switch a home-grown framework.
So, i really need advices how to implement this sort of dynamic behavior in the web application.
regars,
antonA lot of what you're seeing are genuine limitations, but happily, JSF is so pluggable that you can overcome them.
JSPs are problematic in exactly the way you describe - unless your app server has support for pulling JSPs out of a database, etc., you're SOL. JSF, however, lets you use something other than JSPs by replacing the ViewHandler. That's a fair bit of work, but it is doable.
For navigation logic, you'd replace the NavigationHandler. As long as you're willing to write the code that can pull navigation rules from an external source, life is good.
For managed beans, all you need to replace is the VariableResolver - again, if you can pull the rules from an external source, you have full control.
This is all far from easy - and it's a huge amount of work for one person - but I'd imagine these pieces will become available from various sources. A core goal of JSF 1.0 was making the framework as a whole pluggable so that others can innovate on top of the framework.
-- Adam Winer (EG member) -
Error: Invalid configuration for the JMS adapter
Hi!
I'm doing a test with CEP to get messages from a JMS WebLogic queue but I'm getting the following error:
<BEA-2045010> <The application context "Teste" could not be initialized: org.springframework.beans.FatalBeanException: Error in initialization context lifecycle; nested exception is java.lang.IllegalArgumentException: Invalid configuration for the JMS adapter, you must Bean or specify a converter or a type of event.
Teste.context.xml:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
<wlevs:event-type-repository>
<wlevs:event-type type-name="Pet">
<wlevs:class>testewithprotobuf.MyPet$Pet</wlevs:class>
</wlevs:event-type>
</wlevs:event-type-repository>
<wlevs:adapter id="pet_messageAdapter" provider="jms-inbound">
<wlevs:listener ref="pet_inputChannel" />
<wlevs:instance-property name="converterBean"
ref="PetMessageConverter" />
</wlevs:adapter>
<wlevs:channel id="pet_inputChannel" event-type="Pet">
<wlevs:listener ref="pet_messageProcessor" />
</wlevs:channel>
<bean id="PetMessageConverter" class="testewithprotobuf.PetMessageConverter" />
<bean id="PetBean" class="testewithprotobuf.PetBean" />
<wlevs:processor id="pet_messageProcessor">
<wlevs:listener ref="pet_outputChannel" />
</wlevs:processor>
<wlevs:channel id="pet_outputChannel" event-type="Pet">
<wlevs:listener ref="PetBean" />
</wlevs:channel>
</beans>
My converter class:
import java.util.Collections;
import java.util.List;
import javax.jms.BytesMessage;
import javax.jms.JMSException;
import javax.jms.Message;
import testewithprotobuf.MyPet.Pet;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.google.protobuf.InvalidProtocolBufferException;
public class PetMessageConverter implements InboundMessageConverter {
@SuppressWarnings("rawtypes")
@Override
public List convert(Message message) throws MessageConverterException,
JMSException {
BytesMessage bytesMessage = (BytesMessage) message;
long bodyLen = bytesMessage.getBodyLength();
byte[] buffer = new byte[(int) bodyLen];
bytesMessage.readBytes(buffer);
try {
Pet pet = Pet.parseFrom(buffer);
return Collections.singletonList(pet);
} catch (InvalidProtocolBufferException e) {
throw new MessageConverterException(e);
Please, what's wrong?
Thanks!This error usually indicates that you have both event type and converter bean specified or neither specified. In your case, that doesn't appear to the case from looking at the spring file. Could you also paste the contents of your configuration file from META-INF/wlevs directory?
-
How to configure for the price master of the configurable item
in my client we have the configurable items like car doors with different colour as per the color
the price is changing
so how to configure this masterdata for pricing for all the materialHi
This kindly of process is done at Variant configuration. so the pricing will define in condition type VA00. and the variant process as follows:
Eg: Ford car.If a sale order is raised for fiesta lxi model the system should choose red colour & for vxi blue colour respectively.
ie you need to define the characteristic and assign the values .
This characteristic need to assigned to class.
class need to be assigned to material master
1. T.code : CT04(characteristic) FORD_MODEL, Choose single value & entry required tab & give the input as 01 - fiesta_lxi & 02 - fiesta_vxi.( characteristic values)
2.Tcode: CT04, FORD_BODY( another characteristic)
Choose single value , don't click entry required.
01 - Red( characteristic values)
02- Blue
3. Create class T.code : CL02
fiesta_class
type : 300
4. OBJECT DEPENDENCY:
T.CODE : CT04
FORD_MODEL
CLICK VALUES TAB,
IN FIESTA_LXI CLICK THE 'O' meant for Obj dependency, action & extra.
Edit the dependecy,
010 $Self.ford_body = '01'. & save
Repeat the same for FIEST_VXI & instead of '01' give '02' for blue colour.
, then create a ROH as ford_body. & a KMAT material for the car. .
Then create a Super BOM with usage 3 & give component as ford_body
Then use T.code cu41 (Create config profile)
enter a profile name & class 300 & choose class assignment, choose fiest_class ,
Use T.code cu50 to check the values.
Then create a sale order.
Reward if it helps
Regards
Prasanna R
Maybe you are looking for
-
How can I delete imported pictures without itunes
I have some imported photos which i dont want anymore, but itunes wont work on my computer for some reason, so itunes is out of the picture and i need some help.
-
Hi.. Is it possible in SAP HANA to take backup at user level (to take backup of specific user including schemas, objects, constraints etc)? Currently upto release SPS07, I can only see "full DB backup" option as available. Thanks..
-
Radeon HD 3870 Experience...
I finally received this card today from ATI directly. I bought this card to replace my Radeon X1900. The card worked great all day. My Mac seemed to be running a little smoother and I was very happy. I now have my X1900 back in the computer to type t
-
Are you looking for BIG Rhythmic Synth lines?
For those of you into Trance/Techno. Here is an excellent tip that a lot of you will know but for those that don't..... 1) Choose a Nice PAD sound from the EXS24 library on Audio Instrument Track 1. For this example choose Analog Pads>Matrix12Strings
-
Curve 9320 error message 200 after updating
My phone is now dead :-( When I connected my phone to the Desktop software this morning it gave me an update message. I dutifully updated - and my phone has died. I have removed all the desktop software and cleaned out all other files, and reloade