Configuration of Waiting List in T&D 4.6

Hi Experts,
Once again I need a help.
Could you, please, tell me where can I change the pre-configuration of the maximum number of accepted attendees in an event Waiting list?
I am still in doubt if this is possible to do, but I expect it is.
Tks in advance,
Elisa Santos

Tks Dilek.
Very curious becouse despite the value in this entry is 20 my waiting lists still accept only 1 atendee.
I still don't know the reason of this behaviour, but your answer was very helpful!
Tks a lot.
Regards,
Elisa

Similar Messages

Waiting list for Apple Store for iPad

Hi All,
I put my name on the preferred waiting list for the iPad at my local apple store (Mass) on July 11th. The first time I talked to someone, he said it would take 2 weeks. The next time I talked to someone they said it would take a couple of days. Then I talked to someone else and he said "it could take a couple of days or a couple of months, we don't know".
This seems very strange to me because you would think that corporate or some subsidiary would notify the retail store of an upcoming shipment of an extremely popular product. I work in marketing and sales, and I know that when i have a large shipment for a customer, we notify them when their product is coming.
So my question is what is with the lack of information?
Anyone else that has been on the preferred waiting list: what was your experience like? How long did you have to wait? (FYI: it is a 16 GB WiFi only model).
Thank you for your time.
-Matt

m3brown wrote:
Hi All,
I put my name on the preferred waiting list for the iPad at my local apple store (Mass) on July 11th. The first time I talked to someone, he said it would take 2 weeks. The next time I talked to someone they said it would take a couple of days. Then I talked to someone else and he said "it could take a couple of days or a couple of months, we don't know".
This seems very strange to me because you would think that corporate or some subsidiary would notify the retail store of an upcoming shipment of an extremely popular product. I work in marketing and sales, and I know that when i have a large shipment for a customer, we notify them when their product is coming.
So my question is what is with the lack of information?
Anyone else that has been on the preferred waiting list: what was your experience like? How long did you have to wait? (FYI: it is a 16 GB WiFi only model).
Thank you for your time.
-Matt
You should just order it online. I think that supply is tight for the device everywhere.
Apple does things differently. You might be on a list, but it could have 200 names on it. They'd call you if it was available for you (more likely they'd email).
Really, if you had ordered online, you'd have it by now.

Anybody on Bell's "Waiting List" for IPhone 5?

The Morning of the 14th I was one of the first to "Reserve" two new 16GB IPhone 5's at Bell. Here we are at the 23rd, three days the phone has been available for ditribution and Bell does not have any? Anybody else still waiting one one of these lists at a store that hasn't received any phones yet?
I know Apple extended the delivery schedule for new orders, but would have assumed a company as big as Bell would have had at least some come in on launch day. The store claims they got 32 & 64GB phones the Thursday night (I understand apple was very strict this time about this not happening?)
I am about ready to go ask for my "reserve a phone" money back and just wait till the dust settles. Because the "reserve money" is not a deposit.
I have never been someone to get the "Latest and Greatest" New thing. I thought I would spoil me and my wife this time. HUGE disappointment.
Any thoughts, or feel free to complain along with me!!
Stupid "Tickle Me Elmo" he started it ALL!!!!!!!!
Thanks

My Wife went in the other week to find out the scoop....because we didn't trust the Manager we were dealing with. Turns out as we susspected, he skipped us. My wifes phone came in and he skipped her, needless to say she politly told him it was bad business and he need to figure out how he is going to fix this!! He didnt have an answer other than when they come in we can have a free case, my wife didnt accept that.. we paid to have priority and didn't get it.
Long story short he called the next day and said he drove to London to get 2 phones and wanted to give us first dibs, they were both white and we ordered a white and black. I said I dont care and just put a black case on it.
In the end we both got our phone's, didnt get our money back for the waiting list and still had to pay for the cases.
I never have liked the Bell in my town.
Good luck on your wait. All I can say is to keep an eye on your Manager. Convieniantly all the employees and there spouses have the New 5 at the store!!
Thanks for the reply

*configure the Picking list(PL) output type,a smart form for PL.

Hello SIR,
I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
thanks,
agilarasan

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

Training and Events Booking and Waiting List

I have waiting list of employees when firmly booked a training course. It seems the system automatically puts employees on the next course (based on the 'rebookings as of' field on the firmly book screen).
I dont think this is something that can be controlled in config, but I may have missed something!
Grateful for thoughts!
Thanks

Hi,
i'm not sure but i'm thinking
1. that you could change an other "Booking Priority" at the booking screen for example 85 when you have a standard system. Then the booking isn't a waiting-list booking.
2. using the Business Add-In (BAdI) RHPV0001. The checks performed in the standard system can be switched off by the method Activate/ deactivate checks.
Hope this helps.
Regards
Bernd

TEM: when attendee is in Waiting list status, workflow should triger notifi

Dear Professionals,
In TEM, we have a scenario where, if an employee/attendee has booked for an event and in waiting list status, when his waiting list status changes to normal booking (bacause of the cancellations in normal booked) a notification mail should be triger to the manager.
We have identified tables related to attendee status and need help/suggestion on: how this can be designed/achieved in workflow?
what are the workflow tasks standard can be used?
what are the workflow containers required and what parameters need to be passed from workflow container to task container?
<< Moderator message - Everyone's problem is important >>
Regards
Chandrashekar
Edited by: CVKHCM on Oct 26, 2010 9:16 AM
Edited by: Rob Burbank on Oct 26, 2010 3:18 PM

Hi
First you need to determine the object type and the event associated with this requirement. In order to trace that, switch on the event trace using SWELS and then change the status to the normal book and come back in t-code SWEL to find out the event.
Once you determine that , then you can create a workflow using the above event as the Triggering event. Looking at the object type you can determine the various attributes which can be passed from the object to Workflow Container.
In case, if you didnt find the standard object and event for this scenario then developers can create an object type and event for this scenario and from there workflow can be initiated.
Regards
Waz

I received an Ipad for my birthday in November and a month later it stopped working ie it would not power on. It was bought at Best Buy. Now I am told they will replace it HOWEVER I am on a waiting list!!!! This is simply not acceptable and so frustrating

I received an Ipad for my birthday in November. A month later it stopped working- it would not power on. I got it at Best Buy. Now I'm told they will exchange it but I'm on a waiting list! Not only is this impacting my ability to work but it is also sooo frustrating- having received such an expenisive gift and not being able to enjoy the benefits!! Any suggestions???

Dis you try contacting Apple or going to an Apple store? BB is very consistent in how they treat customers (e.g. They Suck!)

Training Events - Waiting list booking

Dear Friends,
I need your suggestions for following issue:
Issue:
Business event is fully booked (reached maximum capacity), and then if user try to book event in u201Cwaiting listu201D, system throws an error saying that u201CThe waiting list has reached maximum capacityu201D.
In fact there are no bookings in u201Cwaiting listu201D, for this business event.
Doubts:
1. What could be the reason for above error?
2. Where can change setting to book attendee in waiting list status?
3. How to book attendee in waiting list?
4. What are all the situations used to book attendee in u201Cwaiting listu201D?
Regards,
TG

Dear Dilek,
We are using "SAP ECC 6.0";, and I've gone through the note 654969, the symptom of the case is as following:
Symptom of note 654969:
The error message: The waiting list has reached maximum capacity, pops
up sometimes when rebooking attendees and the waiting list is not jet
full.
1. Please suggest me whether it is applicable for "SAP ECC 6.0"; or not? in the said note "SAP ECC 6.0" is not highlighted.
2. More over the symptom is specified for rebooking; advice in normal case is it applicable?
Looking forward for yours input.
Regards,
TG

Prioritizing Calls in the Waiting List

Hi
I have posted a post with the same title before here
https://supportforums.cisco.com/thread/2175958?tstart=30
and I had some good answers but not for all the questions I have.
So I will post here the questions again hopping I find answers to the missing parts.
The problem simply is that I need to serve the customers based on thier prority in our own business. The suggestion was to make two skill groups with different priorities and map all the agents to the two groups so when twp calls come the high priority skill group will serve first.
I was thinking in making about 5 skill groups with 5 levels of priorities and all the agents are mapped to all the skill groups. The problem with this implementation is that out customers do not only have 5 levels of priorities. The priority levels are Dynamic. This means that I can not make only 5 skill groups (As Far As I Understand).
So my question is
If I have a wating list and a new call comes from a customer whos priority is larger than the first customer in the waiting queue, How could make my system serves this call before the first customer in the waiting list?
In other words
If I have 20 customers in the waiting list as following.
4-4-4-4-3-3-3-3-2-2-2-2-2-2-2-2-2-1-1-1
if the new call is from a customer whos priority = 7 (which is higher than the first call in the waiting list -4 in our case-) put this call at the beginning of the queue and reject the last call?
the new waiting list will be as following
7-4-4-4-4-3-3-3-3-2-2-2-2-2-2-2-2-2-1-1
Is that possible ?

Dear David:
What I mean with the term dynamic is that there is no specific number of priority levels
For example, as you said the UCCE gives me priority 1-10. These are 10 specific levels but in my case I do not know how much the levels I have.
In other words
Suppose that my call center want to serve the customers based on the number of times they contact us during this month. The number of calling times may be vary from 0 to whatever. Suppose that the number of calls is stored in external DB (DBLookup node) or will be provided using an external application (gateway node)
How would you prioririze the customers in this case ?
Regarding the other question, is there is a way to not run out of CVP ports?
In other words, is there is a way to leave a vacant port in order to handle the new prioritized customer? and reject the lowest call from the queue?
Thanks in advance

Latch wait list latch에 대해 알고 싶습니다.

슬립상태에 빠진 프로세스가 깨어나는 방법에는 2가지가 있다고 알고 있습니다.
타임아웃이 발생해서 깨어나는 방법과 latch wait list 에 등록해놓고 깨어나는 방법이 있는데 9i 까지는 latch wait list를 보호하기 위한 별도의 latch인 latch wait list latch가 있다고 알고 있습니다.
이래치에 대한 정보와 10g부터는 이래치가 사라졌는데 latch wait list를 어떤 방법으로 보호하는지 알고 싶습니다.
열심히 찾아봐도 관련 자료 찾기가 쉽지 않습니다.
능력은 안되지만 오라클에 대한 열정만큼은 크고 열심히 하려고 노력중입니다.
이틀전에 OCM 시험에 도전했는데 실수와 준비가 부족해서 합격은 힘들것 같네요.
오라클을 먼저 시작하신 선배님들의 도움 부탁드립니다.

latch wait posing에 대한 oracle internal 책의 번역자료를 보시면 답변이 될 것
같습니다.
Latch Wait Posting
프로세스가 willing-to-wait mode로 요구한 latch 획득에 실패하며 sleep으로 빠지기 전에 자기 스스로 wake up할 수 있는 방법 중 두번째 메카니즘은 latch wait posting이다. 이 경우, 요구되어지는 latch를 free하는 프로세스가 sleeping하는 프로세스를 wake up하는 것이다. waiting 프로세스는 sleep하기 전에 latch wait posting를 반드시 요구해야 하며 이것은 포스트되어지기를 waiting 프로세스 리스트에 스스로 추가함으로써 가능해지며 이 리스트는 latch wait list라고 불리운다. 한 프로세스가 latch를 free시키고 나면 latch wait list에서 free한 latch를 기다리는 프로세스가 있는지 체크한 후 있다면 waiting 프로세스의 세마포를 포스트한다. 이 작업은 waiting한 프로세스가 실행할 수 있도록 OS가 스케줄링하는 신호를 나타낸다.
Latch wait posting의 장점은 latch free된 후 즉시 waiting 프로세스가 latch를 획득할 수 있다는 점이다. 물론 여기에는 조그마한 비용이 드는데 이것은 latch wait list 데이터 구조를 관리해야 하기 때문이다. 이 데이터 구조는 SGA(X$KSUPR.KSLLALAQ로 보여짐)에 있는 프로세스 테이블을 통한 linked list의 집합으로 구현되어 있다. 이 데이터 구조도 다른 데이터 구조와 마찬가지로 latch에 의해 보호되어 진다. Latch wait list는 상대적으로 길고 따라서 latch wait list latch 또한 오래동안 자주 held 되어진다. 심지어, latch wait posting이 enable되었을때 latch 경함이 심한 경우 latch wait list latch에 대한 부차적인 경합이 나타난다.
Latch wait posting은 디폴트로 library cache와 shared pool latch에 대해서만 enable되어진다. LATCHWAIT_POSTING 파라미터를 0(디폴트는 1)를 세팅하면 모두 disable되고 2로 세팅하면 모두 latch waitng posting이 enable되어진다. Library cache latch 경합이 심하면 latch waiting posting을 disable하는 것이 더 효과적일 것이며, 다른 latch 경합이 보통이라면 latch wait posting을 enable하는 것이 성능에 도움이 될 것이다. 모든 latch에 대하여 latch wait posting을 enable하더라도 cache buffers chaings latch에 대해서는 이 기능을 이용하지 않는다.
V$LATCH 뷰 군에 있는 WAITERS_WORKEN 컬럼은 latch wait posting 메카나즘을 이용하여 wake up한 수를 나타낸다.
OCM이 최근에는 합격선이 낮은 것 같으니 기대해보시지요.

Configure a Picking List

Hi guys.
I need to configure the picking list(LT31), to sort by type pos. origin for one especific storage system Someone can said how can do this ?
Thanks !
Marcos Cesar

Config node
Logistic Execution - Warehouse Management - Activities- Define Print Control
Here create a sort profile as you require eg Storage type, Bin etc
Assign this sort profile to your print code for multiple print
The Print code for multiple processing, you can check in the same config node in multiple processing..probably your are using the std program RLKOMM00..check the assigned PC for ur WH.

LOV an SQL : how to configure a select list to get all records

Hello,
I am using Oracle 10g with APEX 2.0.
Here is my question:
I have a report and I am using 3 text fields and a select list to search through a join of two tables. The select list is composed of a "list of values" and the parameter, which is used in the SQL-sentence, has a numeric value.
Result table after the join operation looks like this:
Field1 Field2 Field3 Field4 (By assuming the field3 is the one which used in the select list.)
21a this 1000 bn
21a that 1001 vb
33c thus 1012 ct
What I want to do is to set another parameter-value pair in the select list to let user choose the "ALL" of the mentioned items in the select list so that the search will return all the records without having taken this select list-field into consideration.
Is it possible to do it with LOV and SQL? Do I need any other functions? or configurations?
Thanks in advance,
Sedef

Hi user630478!
I always use a select list with submit and the option to get a NULL-Value for such things. To solve your problem do the following things:
1.) Create two named LOVs. One as you already did and another one for all values.
2.) Your select list with submit should be configured to show a NULL-Value e. g. it shows ALL with the value 0.
3.) Create two conditional branches that work together with your select list. One that show the normal results if a user has clicked on a normal value and the second should act only if a user has clicked on ALL.
4.) Write a process that switches the LOVs in your select list from one to the other. This process should only be fired if the second conditional branch has been actived.
Maybe if I understood right that's what you want to know.
yours sincerely

How to add NI-VISA Configuration Support to list of additional installers

I recently changed computers and now I am trying to use an installer that I made with the old computer, but one of the additional installers I had selected was the NI-VISA Configuration Support. How do get that installed to my new computer so it will available in the list of additional installers?

if it's not in your 'old' installer then you did not include it in the build.
You will have to download the correct version from NI ... this is the link for the 5.4
http://www.ni.com/download/ni-visa-run-time-engine-5.4/4231/en/
There is a good chance if you install the latest NI VISA your program will run again!

Configuring Extended Access List with Any statement

I have several questions where I'm fuzzy on a configuration already on my network. Whoever setup my network before me just put the same access-lists on all the interfaces at three different locations --
1. Are extended access-lists always source then destination? Like in the following statement:
permit ip host 172.16.4.20 any - Is the source 172.16.4.20 and destination any?
2. Further down though there is:
permit tcp any host 172.16.4.11 eq 443.
In that case is the source any host and the destination 172.16.4.11 ?
This had been placed on an inbound access-list but 4.11 is not internal to that network so I don't think that statement if valid.
3. Also, when you do a:
sho ip access-list -
Not many of the line items in that access have any counts - does that mean nothing is hitting them or like I think they could be misconfigured?
Thanks!

Thank you Alex for your response.
Yes, this is an example:
permit tcp 192.168.1.0 0.0.0.255 host 192.168.2.1 eq 135 389 636 445 3268 3269 domain 88
I have more ACLs and each ACL contains more conditions with multiples Por

Cant see my Configuration and Activities list in DeveConfPers

Hi SCN Team,
I opened NWDS and switched to Development Configuration Perspective.
I imported the configuration into NWDS and created the Project
I created an Activity as well.
Now When i went to check-in the activity it is not showing up in the open Activities List.
Now i closed my NWDS and re-opened again
Now i dont see my Configuration under InActive DCs as well.
Not knowing why this strange behavior. Can anyone let me know where exactly the issue could be

Hi Ervin,
I checked the parameters suggested by you. But nothing worked.
If i swtich to a new workspace, Then my activities will not be seen.
Below is the error log which i see in NWDS Logs. Not knowing how to solve the below issue.
DTR client definition not found for this configuration. VFS client-def name: TrackName_D
!STACK 0
com.sap.tc.devconf.InvalidDefinitionException: DTR client definition not found for this configuration. VFS client-def name: 'TrackName_D'
at com.sap.tc.devconf.DevelopmentConfigurationFactory.upgradeLocalConfigurationMode(DevelopmentConfigurationFactory.java:1537)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.reInitializeConfiguration(DevelopmentConfigurationFactory.java:567)
at com.sap.tc.devconf.DevelopmentConfigurationFactory._getDevelopmentConfigurationInstance(DevelopmentConfigurationFactory.java:420)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.getDevelopmentConfigurationInstance(DevelopmentConfigurationFactory.java:199)
at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:411)
at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:135)
at com.sap.ide.eclipse.component.provider.listener.DevConfLoginListener.loginPerformed(DevConfLoginListener.java:86)
at com.sap.ide.login.UserValidator$1.run(UserValidator.java:161)

Configuration of Waiting List in T&D 4.6

Similar Messages

Maybe you are looking for