Configuration of zprintprogram and z script for F-58

hi
i have created zprintprogram and z script for F-58
then how i can configure this
regards

Hi ,
check in SPRO
search for Payment method in SPRO , or check table T042Z
regards
Prabhu

Similar Messages

Startup and Shutdown scripts for OCS 9.0.4 on Windows?

Hi,
I wanted to know if startup and shutdown scripts for OCS 9.0.4 on Windows are available.
I am thinking something like the ocsctl_sample scripts that OCS10g included.
I have checked the OCS 9.0.4 documentation and not a lot of information for the windows platform is avaiable.
Any information will be appreciated.
Thanks,
Ana

There is no scripts that comes with 9.0.4.
One possibility is to just write the commands you normally use in a batch-file, but note that then you have no checking, and if OCS runs on several machines you should have some checking for required processes etc.
We are using some scripts that does this, but I'm not shure where they came from, possibly from Metalink or from this forum. Try a search. Our scripts are changed quite a bit for our needs, but I might be able to find the original ones.

Anybody who wants to create a small and simple Script for me?

Hi,
I am kind of new to Mac and totally AppleScript illiterate, but maybe there is a kind soul amongst all of you that can create an "easy" script for me?
Well, here it goes:
Every time I boot up my iMac, two things happen, the first is that I programed the "System Preferences" window to open automatically and display the "Energy Saver" section on the "Sleep" sub-section, so far so good and the second thing is that no matter what I have tried to avoid it, the "Customize" window for a program named "Butler" opens also.
Now for the request:
I would like the "System Preference window which displays the Energy Saver section" to change from "Sleep" to "Options" and while being there(in options), to tick(select) AND UN-tick(Un-select) immediately after the "Automatically reduce the brightness of the display before display sleep" Option.
After doing all of this, the window should be closed.
Now, is it possible to create a Script that performs all of the above and besides closes the "Butler" window afterwards?
I know I am asking too much, but I know too that maybe there is someone with a heart of gold and the sufficient knowledge to help me.
Thanks a lot
Enrique Diazruanova

... Every time I boot up my iMac, two things happen, the first is that I programed the "System Preferences" window to open automatically and display the "Energy Saver" section on the "Sleep" sub-section, so far so good and the second thing is that no matter what I have tried to avoid it, the "Customize" window for a program named "Butler" opens also ...
From your initial post, it appears that you have the Butler application running and have used it to access one of the Energy Saver opptions already. I don't have that particular application or a laptop to test, but if you've gotten it to access one option it should be able to access another one.

PeopleSoft - Backup and Restore scripts for PeopleSoft implementation using MS-SQL 2012?

I am working for a county government as a consultant for PeopleSoft using SQL Server. When they restore a DEV instance from PROD, they have to manually stop the web server, app server and batch server, then they do the restore. Afterward they have to change
all references to PROD in the cloned DEV instance. Everything is done manually and takes a couple of hours.
Can anyone point me to scripts for PeopleSoft restores that automate bringing down/up the web, app and batch servers and all the other tasks so they don't have to be done manually?
Life is hard, but it's harder when you're stupid! John 'Duke' Wayne

This question should be posted on PeopleSoft support forum. That being said, a quick search on the internet will provide helpful links like below: http://www.erpassociates.com/peoplesoft-corner-wiki/peoplesoft-administration/cloning-a-peoplesoft-database.html
Satish Kartan www.sqlfood.com

How to attach print program and sap script for F150 transaction

How to attach print program and Z sap script for F150 transaction

Hi,
you can find the customization for dunning in transaction SPRO under this path: Financial Accounting->Accounts Receivable and Accaounts Payable->Business Transactions->Dunning.
Kostas

Configure security-role and method permission for EJB 3.0 using Jdev 11g

The EJB 3.0 session bean created by Jdev 11g EJB wizard does not have ejb-jar.xml. Where and how can security-role and method permission for the EJB be configured?
For example,
<assembly-descriptor>
<security-role>
<role-name>managers</role-name>
</security-role>
<method-permission>
<role-name>managers</role-name>
<method>
<ejb-name>Employees</ejb-name>
<method-name>setSalary</method-name>
<method-params>
<method-param>java.lang.Long</method-param>
</method-params>
</method>
</method-permission>
</assembly-descriptor>

user516954,
By default annotations are used. However, you can create a new descriptor and that will take presidence over any declared annotation.
--Ric

Need a click and drag script for multiple layers.

Hi. I'm realitivly new to Flash and Action Script.
For a Majour project school asignment i am trying to create an interactive map for a hypothetical theme park, and i'll cut to the chase, i need a script that allows the player to drag the content of two or three layers around the screen upon mouse click, similar to this example:\
http://www.dreamworld.com.au/content/drw_2008_shopping.asp?name=ParkMap
I will have a layer for buttons (probably called Buttons) and a layer for the map graphic (Probably called Map), similar to this tutorial:
http://www.republicofcode.com/tutorials/flash/interactive_map/
If anyone could produce, or has a script lying around that could do this; i would really apreciate it.
This assignment has a large impact on my UAI (universities admission index).
Thanks for your time,
Pat

Thanks for your help. I really appreciate it.
The problem is; this is the script i am using to make the map interactive:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var cities:Array = ["muscat", "sohar", "dubai","abu_dhabi"]
function mover (targetX, targetY){
currentX = marker_mc._x;
currentY = marker_mc._y;
var xTween:Tween = new Tween(marker_mc, "_x", Strong.easeOut, currentX, targetX, .5, true);
var yTween:Tween = new Tween(marker_mc, "_y", Back.easeOut, currentY, targetY, 1.5, true);
for (var i = 0; i<cities.length; i++){
var my_btn = this[cities[i]+"_btn"];
my_btn.myCity = cities[i];
my_btn.onRollOver = function() {
mover( this._x, this._y);
marker_mc.gotoAndStop(this.myCity);
And when the buttons are made to be part of a movie clip with the image i am using for the background this script does not work.
The script is located in a layer called "Actions", if that is of any help at all.
Any ideas?
I am sorry if I am being a newsense.
Thanks

VMM 2012: How to Configure Automatic Start and Stop Actions for a Virtual Machine?

Does somebody know how to confgure Automatic Start and Stop Actions for a Virtual Machine in VMM 2012?
I miss that option.

Automatic Start or Automatic Restart actions are available for virtual machines running on a Hyper-V cluster from within Virtual Machine Manager.
From within Virtual Machine Manager, bring up the Virtual Machine's properties:
Click "Hardware Configuration"
Click "Availability"
Click "High", "Medium", or "Low" to enable automatic start/restart or
Click "Do not restart automatically" to disable automatic start/restart
Screenshot from VMM 2012 for a VM running in a Server 2012 R2 Hyper-V cluster:
VMs running on a cluster have to be marked "Highly Available" and logically, Microsoft assumes that you'll want these VMs to be running all the time when this setting is selected. If the cluster fails or needs to be restarted, you can set the priority
by which a VM restarts, or you can set the VM to not restart at all when cluster services are restored by using the settings above.

Alert and Monitoring Scripts for Hyperion Applications

Hi Gurus,
Can you please provide me with any customized scripts for automating alert mails and monitoring activities pertaining to Hyperion Applications.
If not, can you please suggest some alternatives where i can get hold of some scripts. Any kind of help is greatly appreciated.
Also can someone please throw some light about the APPMULE and how to procure their services or we can get it for free trial.
Regards,
Uday

Any kind of leads on this is really appreciated.
Regards,
Uday

Configuration in Solman and Satellite system for Support message creation ?

Hi ,
I want to send a support message to solman from the ( help menu -> create support message )
of my satellite system.
any one tell me the settings that i have to make in both the sattelite system and the solman for sending a support message.

Hi,
the necessary steps are described in Solution Manager IMG documentation.
Also you can find that information in the web blogs in this forum.
In a nutshell:
- activate Service Desk in Solution Manager (incl. BC-Sets)
- maintain System Landscape, RFCs and iBase
- create key users (business partners)
- maintain number ranges
- assign roles
- maintain table BCOS_CUST in satellite system
You should just follow the corresponding customizing steps in tx: SPRO.
/cheers

Configuring the iPhone and your environment for wireless corporate email

I'm posting this as a top level thread, because I'm certain that there are others out there, who like me, are trying to figure this out.
Configuring the iPhone for Enterprise Use
With Apple’s release of the iPhone, IT organizations are presented with an interesting challenge. Senior execs, gadget heads, and technoratti are all flocking to this device, heralded as the be all and end all of smartphone telecommunications technology. As these devices begin to flood into our organizations, we are met with the challenge to ‘make it work’.
After much explaining that the iPhone is not intended for Enterprise integration, and many discussions surrounding the technical feasibility of bringing said devices into the fold, and being the resident Mac and Linux head with an iPhone in hand, I decided to embark on the mission of making one ‘work’. I succeeded in part, however it’s not the kind of ‘work’ that is going to be viable for most end users.
First of all, it’s important to understand that the email client for the iPhone is a modified version of Mac’s Mail program. Not the best client in the world, but it does support Exchange integration. It also does external email sources, such as Yahoo and gMail, very well. For my interest though, I’m focusing on the Exchange integration functionality, as that is just about everyone’s corporate standard.
Bringing this task to fruition requires some understanding about the limitations of the iPhone, as well as some of its current quirks. Wireless802.11x, EDGE, VPN and Mail are all components necessary to provide a serviceable solution for mobile email access, and each of these things has some peculiarities that don’t appear to be fully worked out by Apple at this time.
For instance, within my organization, we have a secured wireless connectivity option available within our building; however, the SSID of this network is not broadcast, for the obvious reasons. SO, connecting the iPhone to it is a manual process of defining the network, and automatic reconnection seems to be very hit or miss, so it becomes far less of an option for any form of direct network access to your Exchange environment. (As an example, I had to redefine that network, on the iPhone, at least half a dozen times during this process.)
The other components have equally quirky issues, and I will discuss the how’s to get around them below.
In coordinating this into a cohesive plan however, I will break this into three sections;
1. Wireless and EDGE connectivity
2. VPN access to your network
3. Connecting to Exchange
So, without further ado;
Wireless and EDGE Connectivity
The wireless capabilities of the iPhone are, on the surface at least, excellent. It connects seamlessly to unsecured networks, offers the option of prompted or unprompted automatic connectivity, and is capable of 802.11G performance. Not bad for such a small package. However, it is very limited in the forms of secure network access it supports. These are, to quote Apple’s website; (and my iPhone)
WEP Password
WEP hex or ASCII
WPA (personal)
WPA2 (personal)
Now, due to the obvious security problems in implementing WEP security, it’s likely that any network you run into is going to be WPA or WPA2. The iPhone ONLY supports the personal versions of these protocols, so be aware of this going into the situation. If you’re not connecting to your work or school wireless, and you’re entering the information correctly, then it’s probably because they have the Enterprise version of one of the protocols enabled. If that is the case, then you’re either hunting for unsecured hotspots, or else depending on EDGE.
In my case, I did have access to a WPA2 (Personal) enabled wireless signal to connect to my internal network. I thought my problem was half solved! I defined the connection, the wireless capability of the phone worked perfectly, and I was connected. I was wrong. Apparently, and judging from the Mac forums I’m not alone in this, the iPhone does not do a very good job of RE-connecting to a secured wireless network. It does an even worse job, when this is coupled with the fact that it doesn’t do a very good job reconnecting to a wireless network with an unpublished SSID.
After much fiddling and research into this, I determined that this simply was not the way to go, and I abandoned the idea. I wasn’t about to compromise my network security in order to get this silly phone working! So, that left me with either unsecured WiFi, or EDGE.
Either one of these connects pretty seamlessly, and gives me a relatively decent Internet connection. There are some issues being reported of the iPhone swapping between EDGE and WiFi for not apparent reason, but that said, it can still be made to work.
Now that I had this connection outside of my network, I obviously had to consider options for getting a secured connection into my network, which of course leads us to;
VPN Access Into Your Network
Being that this device was touted as the ‘real internet’ I was very excited to see if I could achieve this connection through my SSL VPN appliance. To make a long story short, I could not. Because Apple’s idea of the ‘Real Internet’ apparently does not include those wacky concepts like Java support, this proved to be impossible. My Apple cohorts will scream that it does support JavaScript, but we all know that that and 2 bucks will get you a small coffee at Starbucks… and not much more.
(The iPhone also does not support Flash, but that’s a topic for another conversation. I know, how could they leave that out? I’m amazed too, but then Steve Jobs always has been a bit too arrogant for his own good… I mean what does he expect, we’re all going to rewrite everything into QuickTime??? Please.)
Since that option didn’t work, I was left with the wide selection of two possibilities provided within the iPhone software. Either, a PPTP or L2TP VPN tunnel.
We went ahead and configured a PPTP connection on one of our Cisco routers in order to test this. It didn’t work. I couldn’t connect to it. Tried and tried. Nada. SOOOO, we said OK, and configured a L2TP connection on one of our Cisco routers, with similar results.
Figuring that this was something in the config, we called Cisco, and did the technical support dance with them for several days, trying one thing after another to get this connection to actually work. Nothing helped, and it never worked using either protocol. Then, I noticed an obscure article somewhere on some website that said something to the effect that getting one of these tunnels to work from the iPhone to Cisco was nigh on impossible.
About the same time, my senior network guy said screw it, let’s put this on a Microsoft server. And so we did. Now, this is interesting in it’s own right, because configuring out of the box L2TP or PPTP on a Microsoft server results in a default authentication method of Windows Authentication. This does not work for the iPhone, because it has no idea what to do with the Windows security token it receives. So, you authenticate, and then are immediately dropped due to an inability to communicate with the PPP server.
Fortunately, we (as do most organizations) have a Radius server. We selected Radius authentication, configured both sides of the Radius authentication setup properly, and launched the PPTP tunnel…. AND…. EUREKA!!! The iPhone’s VPN software connected, authenticated, got an IP, and I was on the network! Well, no.
After about 2 seconds, I realized that while I did indeed have a connection, I couldn’t do anything with it. Couldn’t even browse to an internal site via IP address. The connection was up, the connection was working, the connection was useless.
So, we decided to give L2TP a shot. Configured it pretty much identically to the PPTP setup, used Radius, launched the iPhone client, and finally, after many days of screwing around, it worked. Now all I needed was to get my email working, so I started working on;
Connecting to Exchange
In the Mail program on the iPhone, the first time you launch it, you’re presented with the ability to configure an email source. However on subsequent or additional accounts, you must go under Settings, Mail to get to this functionality.
Going into the Mail configuration, I selected an additional account, the account type is, of course, Exchange. The configuration components are pretty obvious, however some things of note are;
Do NOT include your domain information in the User Name field
For all Host Names, use the fully qualified domain name of the server, or else IP
You WILL need to have SMTP enabled somewhere in order to send email
Anyway, I set all this up, and nothing happened. It said that my server was not responding. Did a little research, and it turns out that the only way to connect to Exchange is through an IMAP4 connection, and just in case you didn’t know, IMAP4 is disabled by default, so you have to enable and configure it.
Went onto the Exchange server, set the service to Auto, Started the listener, and finally, at long last, EUREKA! I finally had Corporate email on my iPhone, connecting securely, and not sending anything plain text anywhere. Hooray!
Now for the problems with this solution;
First of all, it depends upon VPN access into your environment, something that you may or may not be comfortable with. One good thing is that the iPhone does prompt for password to reconnect, and will tie the continuity of the VPN connection into the general phone lock security, such that an inability to provide the appropriate access code to a locked phone results in the VPN not being accessible.
The VPN of course is dependant upon a reliable network connection. I’ve noticed that it’s somewhat graceful in switching between WiFi and EDGE, however it’s not totally graceful, and you can experience some hinky things, like being able to send and not receive, or the mail client saying ‘Connecting’ for about 5 minutes before it figures things out.
The best cure for this is to simply stop and restart the VPN connection. Note that when you reconnect, the first attempt will prompt you for a numeric password, this is meaningless unless you have the device lock turned on. Just enter anything. (I think this is another bug) THEN it will re-prompt you for your real VPN password.
This solution for email delivery is obviously dependant upon the VPN connection being active. I’ve noticed that at times the iPhone will disconnect the VPN (probably when service switching) and not bother to mention it. When that happens, of course the VPN must be restarted.
For the lazy, this is an inconvenient solution because while it would appear that the iPhone will cache the VPN password, in fact it will not. That means that each re-launch requires that you re-enter your password. Not terrible for me, but I could see it being very tedious for the average corporate user.
The OSX Mail client has several little deficiencies, which may or may not impact your use of the device in this manner. For instance, if you have subfolders defined for your inbox, and server side rules to move mail into them, then you will not see any synchronization of that mail until you actually select the subfolder. Also, since there is such poor management of attachments and downloads, moving anything around via email on this device is nigh on impossible.
EDGE access to your corporate email, via a VPN, is a bit sloooooow. It works, it’s certainly fast enough for my purposes, but it’s not the slick quick access that we’ve all become accustomed to with Blackberry and Good devices. The lack of 3G support becomes a very noticeable shortcoming here.
(Why Apply didn’t simply partner with Good Technologies to crank out a client for this thing, I’ll never understand, but I guess you can refer to my comment above about certain people’s arrogance.)
The biggest problem of all of course is that it’s simply klugey. I hate klugey. But, with the capabilities at this device’s disposal, and given Apple’s ambitious, if a bit idiotic, stance that no third party will develop software for the iPhone, then this is about as good as it’s going to get for now.
It is my understanding that overseas there is some initiative underway to provide a more seamless Visto or Synchronica integration for enterprise email. However, given Apple’s unbelievably restrictive agreement with ATT regarding this device and the OTA necessity of delivering the client, I seriously doubt if we’ll see this in the near future in the US.
But I digress, so…
In Conclusion
This solution is not for the faint of heart, it doesn’t work all that well, and it has way too many moving parts that are subject to failure. However, I would say that this solution is serviceable for the corporate technology professional who needs email, and really, REALLY wants the other features of the iPhone. (ie, phone whores such as me.) It requires patience, it requires an understanding that this is not a 100% thing, and there definitely needs to be a prebuilt expectation that this device will not serve your email in anything approaching the manner to which you’ve become accustomed.
As long as all of that is okay though, then go right ahead, set it up, and enjoy!
The Short Version;
(I put this at the end because I want everyone to feel my pain!)
Wireless:
Use unsecured wireless or EDGE. Secured wireless may be serviceable as long as the SSID is broadcast, but there are known issues with this.
VPN:
L2TP, shared secret, running on Microsoft server, with Radius. (May work elsewhere, but doesn’t seem to run on Cisco at all) Accounts enabled for external access.
Exchange:
Configure IMAP4 Virtual Server on your Exchange environment, ensure that you have some SMTP resource for outbound email, use fully qualified domain names for all servers (or IP) in the mail config and do not include any domain prefix or suffix for user accounts.
The BIG Disclaimer at the End
Please note that all of this is provided ‘as is’. It worked for me, and I hope it works for you. To my knowledge, it’s not endorsed by Apple, and I’m not in the business of providing support for this thing. If it breaks something, if it doesn’t work, or if you simply don’t like it or me, I don’t care. However, if you have a question, and I’m not busy, and I feel like answering, I may lend a hand. You can email me at
Matthew dot Yotko at mac dot com
Don’t be surprised or offended if I don’t answer. Also, understand that I don’t check this address every day… Maybe a couple times a week.
Macbook Pro Mac OS X (10.4.10) iphone

Thanks, now I understand why the wifi keeps dropping. On my personal wireless network, it also seems the distance from the access point is not good compared to my laptop. At work our network & exchange teams don't seem to have the desire to struggle with this "toy" until customers start forcing its adoption. I am using OWA and it works fine over EDGE. I will share your posting with them.
Thank you again.
Dell Windows XP Pro

Configuring Doc Path (and Source Path) for default JDeveloper library

hi
Sometimes a default JDeveloper library as no Doc Path (or Source Path) configured.
Adding a project library with only a Doc Path (or/and Source Path) configured (so no Class Path) can make the relevant API documentation more easily available in JDeveloper,
see http://www.consideringred.com/files/oracle/img/2011/library-doc-path-20110529.png
- (q1) Why has the "WebLogic 10.3 Remote-Client" library no Doc Path configured by default?
- (q2) Are somehow/somewhere source files available (maybe only of "API related"/non-implementation classes) for the "WebLogic 10.3 Remote-Client" library, so these can be configured in a library Source Path, to make the API documentation even more easily accessible in JDeveloper?
many thanks
Jan Vervecken

Thanks for your reply John.
John Stegeman wrote:
... At least some of the classes' javadocs are [url http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e13941/toc.htm]here ...
As I write in my initial post, I am able to add a project library with only a Doc Path configured (as shown in library-doc-path-20110529.png),
to "Oracle Fusion Middleware Oracle WebLogic Server MBean Javadoc 11g Release 1 (10.3.5) Part Number E13945-05 "
at http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e13945/
So, questions (q1) about a default Doc Path configuration and question (q2) about source files (similar to ADF) remain.
regards
Jan

Configuration of form and prog name for Invoice(MM)

Hello,
Can someone tell me the output type and configuration area/transaction from where i can change the form and the program name for the invoice(MM)
Thanks,
Shehryar

Hi,
Goto NACE tcode & select "MR" ( Invoice verification ) & press "Output Types"--> select the desired output type say "REKL" & double click on processing routines. Here we can see the Forms & program name's for different medium of output.
Regards,
Krishnamurthy.SC

Is \\ domaincontroller \NETLOGON\ the best place to launch .bat and .vbs scripts for GPO clients?

I am trying to figure out what the optimal shared location is for launching a script via GPO, that will put specific shortcuts on my users' taskbar when when they first login to Windows 7 and create their profile.
Is putting these scripts in the NETLOGON share on the closest domain controller the best method for doing this?

I am trying to figure out what the optimal shared location is for launching a script via GPO, that will put specific shortcuts on my users' taskbar when when they first login to Windows 7 and create their profile.
Is putting these scripts in the NETLOGON share on the closest domain controller the best method for doing this?
Yes, to run a script, the NETLOGON share would, indeed, be the best location.
However, placing shortcuts through a script does not seem the best approach to tackle this challenge. With the Group Policy Preferences Client Side Extensions installed by default on Windows 7 (and up), creating shortcuts with Preferences would be a
far better, easier and more flexible solution.
More information:
Group Policy Preferences Getting Started Guide
Group Policy Preferences Overview
Windows 7: Group Policy Preferences
Changing the default profile is also possible by defining a default profile in NETLOGON. This, too, might prove to be a more flexible approach.
More information:
168475 How to Create a Base Profile for All Users
973289 Customize the default local user profile when preparing an image of Windows
As a side note, I would like to add, that Windows 8.1 clients (and up) will, by default, run scripts after a default time-out of five minutes.
More information:
Is your organization ready for Windows 8.1? Part 14, Logon Script Delay

Startup and shutdown script for EP 60SP2 Unix

Does anyone have a working script to shutdown and startup EP 60 SP2 on unix (solaris) that they would like to share.....
Needed for sys ops to be able to log n and stop and start....and for admins to start and stop at the unix if server needs rebooted (for solaris patches, scheduled maintenance windows etc etc)
Thanks
John Ryan

Hi John,
The scripts below can be used to start the J2EE engine/portal so it gets you halfway there (doesn't stop). The script also creates the log ouput under the tmp directory). Then from a command you just have to type startdisp.sh or whatever script you're trying to run.
PS. If you have your r3startup service set to automatic, you can just use the dispatcher script below.
Hope this helps.
Marty
UNIXSERVER% more startdisp.sh
#!/bin/ksh
nohup cluster/dispatcher/go > /tmp/dispatcher.$$.out 2>&1 &
UNIXSERVER% more startserver.sh
#!/bin/ksh
nohup cluster/server/go > /tmp/server.$$.out 2>&1 &
UNIXSERVER% more startstate.sh
#!/bin/ksh
nohup cluster/state/go > /tmp/state.$$.out 2>&1 &

Configuration of zprintprogram and z script for F-58

Similar Messages

Maybe you are looking for