Configuration or hardware problem?

After transferring music to my daughter’s nano a couple of days ago I connected it again to my PC, and have constantly obtained a message saying that “itunes has detected an ipod in recovery mode”. I have restored the nano for 3 times, and did not solve the problem. I even uninstalled itunes and reinstalled and nothing seems to work as I got the same recovery mode message.
Heeeelp please!!!!

Hello CWOOD,
The only suggestion I have to offer is to try to reassign the iPod's drive letter via Device Manager->Disk Management. Your iPod may be getting confused with another drive you have connected to your computer or one you often connect to such as a network drive.
For detailed instructions on how to reassign the drive letter, see this Apple support .
http://support.apple.com/kb/TS1493
B-rock

Similar Messages

Lenovo B590 configuration or hardware problems (microphone and WAN miniport)?

Hi,
First message here. :-)
Ok, when I use the integrated microphone, I can barely hear myself. It has always worked like that and I don't know if there's a problem. I uninstalled and installed the drivers, I amplified +20 dB and the output is very low. When I'm trying out different things, if I try to configure speech recognition and read the sentence I can see how the bar oscillates like it recognizes some sound, but the result is too low and it tells me that it couldn't hear a thing.
Also, out of nothing I receive this message that tells me that my WAN miniport is disabled. The Lenovo Solution Center detects this problem but it doesn't fix it, and I can't enable The WAN miniport it in the device administrator, either.
Thank you for your help.
Solved!
Go to Solution.

Hi EXinthenet, welcome to the forums,
regarding the WAN Miniport, it seems that a recent Microsoft update (KB2836988) has caused this to happen on some systems, unfortunately uninstalling the update doesn't solve the problem.
You could do a system restore in Windows to a point before the update was installed and then whan you update hide / exclude the update by right clicking it before updating. More information and an alternative fix can be found in the following threads,
Win 8 Monthly Update - T430S WAN Miniport Problem
SOLVED! WAN Miniport #2 yellow exclamation mark in Device Manager
I would suggest starting another thread for the microphone issue, don't forget to state which operating system version, 32 bit / 64 bit, and sound driver versions you have installed.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

"DPC_watchdog_violation" happens almost everyday, tried re-installing, is this a hardware problem?

Hello, I'm from Hong Kong. You guys must be wondering why I'd post in a foreign forum instead of local one - I cant find any support from my local forum. I cant even find this model form my local Website.
First of all, I brought this laptop (Envy 14) in 2013 from my so called "University Notebook Scheme". But once I got my first Envy, problem arised - my screen keeps flashing. I went back to the store and replaced it with a new one. Yet, this "new one" keeps having "DPC_watchdog_violation" almost everyday, no matter what Im doing - browsing the Net, using iTunes, even when Im using Microsoft Office for my assignments.
I've tried many solutions suggested: updating software & drivers, and reinstalling the windows; nothing works. Instead, more problem arised throughout these 2 years: my screen starts to flash, sometimes I cant even turn my computer on (power button on with a black, turned on, screen). I cant update my windows - "Failure configuring Windows updates, Reverting changes" and got stuck in the update loop.
I'm scared to do anything with this laptop now, even typing this "problem discription". I stored every files into the Dropbox for safety purposes. I save my Word documents every minutes, try to run as less programme as I could.
I've been wondering if this is a hardware problem, a serious one. Some of my classmates also got this Laptop from the University Scheme as well, most of them reported with the same issue (especially for the screen/display issue). With the notorious HP's repair and warranty service, I'm discouraged to sent my Laptop to them. I've even heard that I'll be charged even I'm still under warranty.
P.S. sorry if I have made any grammatical mistakes.

Additional Information for my Laptop (from WhoCrased):
System Information (local)
windows version: Windows 8 , 6.2, build: 9200
windows dir: C:\Windows
Hardware: HP ENVY 14 Sleekbook, Hewlett-Packard, 198C
CPU: GenuineIntel Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 8351010816 total
Crash Dump Analysis
Crash dump directory: C:\Windows\Minidump
Crash dumps are enabled on your computer.
On Fri 27/02/15 7:02:39 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022715-19390-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x5A540)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\ntoskrnl.exe
product: MicrosoftR WindowsR Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Fri 27/02/15 7:02:39 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: iastora.sys (iaStorA+0x770DB)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\drivers\iastora.sys
product: Intel Rapid Storage Technology driver
company: Intel Corporation
description: Intel Rapid Storage Technology driver - x64
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: iastora.sys (Intel Rapid Storage Technology driver - x64, Intel Corporation).
Google query: Intel Corporation DPC_WATCHDOG_VIOLATION
On Fri 27/02/15 3:22:12 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022715-15015-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x5A540)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\ntoskrnl.exe
product: MicrosoftR WindowsR Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Thu 26/02/15 7:39:23 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022615-33093-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x5A540)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\ntoskrnl.exe
product: MicrosoftR WindowsR Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 16/02/15 9:27:12 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\021615-23328-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x5A540)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\ntoskrnl.exe
product: MicrosoftR WindowsR Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 14/02/15 9:37:59 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\021415-28265-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x5A540)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\ntoskrnl.exe
product: MicrosoftR WindowsR Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Wed 28/01/15 3:01:05 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\012815-19171-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x5A540)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\ntoskrnl.exe
product: MicrosoftR WindowsR Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Tue 27/01/15 2:44:44 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\012715-33937-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x5A540)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\ntoskrnl.exe
product: MicrosoftR WindowsR Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Fri 23/01/15 3:33:59 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\012315-63484-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x5A540)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\ntoskrnl.exe
product: MicrosoftR WindowsR Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Tue 20/01/15 5:31:56 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\012015-18734-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x5A540)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\ntoskrnl.exe
product: MicrosoftR WindowsR Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

Possible NIC hardware problem?

Hi,
I have two sun servers, both solaris 9, that act as firewalls.
I have installed only OS Core. The firewall software is Checkpoint.
These two servers are in cluster (checkpoint xl).
I have many other sun servers configured in this way that work perfectly.
But with these two servers I have a lot of network problems.
For instance, if I issue a nestat -rn I see a lot of entries (about one hundred!!). Do you know what this happens?
My security admins think that there could be a nic hardware problem.
How can I be sure that the network cards are ok?
If I run, on both servers, from ok prompt:
test net
I get
rejecting alloc-mem?
What does this mean?
The servers are:
- SUNFIRE V120
- SUNFIRE V240
Can you help me?
Thanks,
Tarek

I would just like to make the point that even though you may have great stability with a number of systems without applying firmware and OS patches, it does not mean that the system you are currently experiencing these issues with will not benefit from firmware upgrade. Some of the systems may have different component revisions that require firmware upgrade. Some of the features that are included in firmware upgrades can improve asr ( automatic system recovery ), hardware diagnosability, hardware integrity and generally improves chances of discovering and isolating faults. So it would be a good idea to implement a plan to upgrade all your systems with the patest firmware.
I would put this system on alert and make a service call with Sun, asr ( automatic system recovery ) can detect early signs that a component is failing and just clearing the disk from asr should not be the only step taken here, the disk may need to be replaced.
I am currently looking through the internal hand book for some references for you, there should be some good spectrum stuff that I can point you to, I'll update shortly.
One more thing, when you were configuring Solaris for FW-1, there are a number fo kernel parameters to change, misconfiguration of any of these parameters could be a cause for FW-1 to report errors.
On the output from netstat -rn, I wouldn't worry about that too much, if the system is a gateway for a large number of hosts it will probably have an enrty for all networks being visted by hosts on the client side.

NI 5734 Hardware Problem

Hi,
I am using FlexRIO with a NI 5734 Digitizer on a NI 7862R FPGA.
Since some days the input of all 4 ADC's shows an uncommon behaviour.
If I connect a square wave signal to any of the inputs, the signal is distorted like in the attached picture.
I checked the signal also with another oscilloscope, cables and waveform generator. It seems to be a hardware problem...
Has anybody an idea?
Yours,
Chris
Attachments:
NI5734_Problem.png ‏12 KB

Following on from this problem, I believe I have a similar problem with the gain setting of the NI 5734 module.
The documentation I have found states that it is software configurable but I cannot find anywhere that tells you how to configure it.
Any guidance would be hugely appreciated.
Regards,
Phil.

My iphone 5s vibrates so loudly but my friend's iphone 5s vibrates just fine. can anyone tell me if it is any hardware problem?

i have bought an iphone 5s few days ago and i noticed that vibration of my iphone is different from other iphones. my iphone's vibration is so loud and noisy it is kind of rattly noise whenever i recieve a call or a text message, So i checked one of my friend's iphone 5s and it vibrates just fine. can anyone tell me why is it so? is it a hardware problem or what?

Do you have the same vibrate settings as your friend?
You can check this by going to Settings > Sounds > Text Tone

For the second time (I've been to the Genius Bar once already) my WiFi isn't working on my iPhone 4S. This is really infuriating and costly!!! I see others have the same issues. Can't Apple do anything about this? It's obviously a hardware problem!

For the second time (I've been to the Genius Bar already once with this) my Wifi isn't working. They gave me a new iphone last time, but the new one has the same issue as the old one, I'm guessing. I've tried resetting the network but that doesn't work.
I see others have this issue too.
If this is a hardware problem why doesn't Apple fix it? Or do I just have to wait another year for another upgrade?
Currently it's not costing me anything - yet - because I've got the Apple Warranty but this is totally frustating!!! I bought the original phone (which has been replaced in July 2012. The new phone (without working Wifi) is a month old.
Will try Restore via ITunes before (I will invariably) have to return to the Genius Bar for another Iphone 4S unless someone has an ingenius solution here?..?

sematson wrote:
If this is a hardware problem why doesn't Apple fix it? Or do I just have to wait another year for another upgrade?
For what reason, other than making yourself look foolish, would you ask questions that we users could not possibly answer as we're NOT Apple?
Basics from the manual are restart, reset, restore from backup, restore as NEW. Nothing more "ingenius" to suggest than these steps that Apple has outlined in the manual. If these steps don't work, then go back to the Apple store.

My iPhone 5 dies at 20-24% it doesn't go all the way to 0%. Will apple replace my phone or fix my phone for free since its hardware problem and I have no money. This is my second iphone 5 replacement.

My iPhone 5 dies at 20-24% it doesn't go all the way to 0%. Will apple replace my phone or fix my phone for free since its hardware problem and I have no money. This is my second iphone 5 replacement. I have no apple care so I'm worried. My phone has NEVER touched water! I only get 1/5 of battery use. I've also spent 30$ at the apple store on screen protectors for nothing! I really don't have 220$ nor 50$ I am on a strict budget. I believe I have to pay 220 not 50 ford a phone replacement for accidental damage. I don't know what category this falls under. I really need a new phone or battery. HELP! Will I have to pay? Also my screen lighting is all topsy-tervy every I put my screen on highest it won't work I have to wait about a minute? Forgot to mention that my apps exit out by themselves all the time when Im using them.

So, have you tried a reset? Restore from backup? Restore as new? You seem to have a few problems but do not mention any action taken to resolve them. What have screen protectors to do with anything?

When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?

I got my ipad2 replaced yesterday. And this new ipad started giving me problem by crashing aps. Then I restored the ipad twice but the problem was still there. I called apple and they fixed it by doing Reset All Settings. But now I have this weird problem. When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?

There is no way for anyone here to know if your replacement iPad is a refurbished unit. Per Apple's replacement policy, replacements can be refurbished units. If you feel the unit is not working correctly, take it back, let them check it out and if found defective, they will replace that unit.

I need to replace my iPhone 4S due to a hardware problem. Will I be offered to upgrade to iPhone 5 for an extra fee?

Hey everyone. I have an iPhone 4S that needs replacing due to obvious hardware issues (shuts down randomly on its own). I have shown the panic.plist reports that it generates on another forum and they have confirmed the kernel and hardware problem.
Since replacing it is the only way to go for me, I was wondering whether Apple still offers the option to upgrade to the next model when going to replace a phone with warranty. What I mean is, if I go to an Apple Store and ask to replace my handset for a new one (with my warranty/receipt) will I be offered to upgrade to an iPhone 5 for an additional fee? Can I ask for this option?
Thanks!

FedeMJ wrote:
...I was wondering whether Apple still offers the option to upgrade to the next model when going to replace a phone with warranty....
Apple has NEVER offered this as an option.

ZEN Vision 'Hardware Problem' error mess

Model No: ZEN Vision - PMC-HD0002
Error occurred as a result of a firmware upgrade.I can access 'recovery mode' &?have attempted several further firmware upgrades.It loads, rebuilds, reboots, starts then the 'hardware problem' error message returns.The device is currently stating, in 'recovery mode', that the following firmware is loaded v.42.0_0.0.9.I have removed all data (format all), run 'clean up' & 'rebooted' then upgraded firmware but with no success.?Any ideas will be greatly received & appreciated.

hi.
i have exactly the same problem.
did you manage to find any answer?
how did you access the recovery mode?
your response will be greatly appreciated.
thanks!

Problem with my iPod touch: Frozen screen, unable to access anything as slider does not work, will not accept a full restore. Apple Store advised that it is a 'hardware' problem and I could trade-in!

I am a relatively 'new' user. Touch was a gift, I used it in a simplistic way - listened to music took a few photos, added a few calendar events. After a year I then decided to be more proactive and found a few free apps (Solitaire) - then had a the frozen screen problem which I though was connected to low battery, but it wasn't. I recharged it, still could not access, then tried a full restore and got an error message. Took it to a Genius Bar and was told it was a hardware problem and as it is out of warranty I could trade in or just buy a different product. As this is my first Apple product is this usual? Do Apple products have a very short shelf life - I anticipated that it would last me longer than a year! Has anyone else had this problem? Was it able to be resolved? Or is it worth trying to get it repaired - and if so who can do it - Apple Store did not offer that to me as an option?

Sure sounds like a hardware problem. It happens some times. The iPod is just an electrical device.
Apple will exchange it for a refurbished one for this price. Apple does not repair your iPod.
Apple - Support - iPod - Repair pricing
A third-party place like the following maybe less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Upgrading from OSX 10.3.9 to 10.5.4, Software or Hardware problem?

I have a Mac mini G4, 1.42GHz, 1GB ram, running 10.3.9 I tried to install 10.5.4 from the grey disk that came with my newer iMac but I just get an error saying it cannot be installed. Is this a hardware problem with my Mac mini or a software problem with the disk only being lisenced for one computer or something like that?

Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5

3g is not working but 2g is fine - could this be a hardware problem?

Just recently updated to IOS6 and now can't get 3g, but I also dropped my phone at the same time.
I've tried all the resets and changed SIM and the issue is definitely with the handset either hardware or software installed on it.
Is it possible that I've dammaged the 3g antenna? I get 2g fine, and wifi fine, so I guess my question is does the iPhone have seperate antennas for 3g?
Thanks
Dave

It very likely could be a hardware problem.
Are you certain that you did not simply disable 3G? Check Settings > General > Network > Enable 3G to ensure it is ON.

Drive has a hardware problem that can't be repaired?

I have had a Lacie 1TB 7200RPM external drive for about 3 years now. In the last two days I got this message when I went into disk utility. "drive has a hardware problem that can't be repaired". I was able to back up all the info off of the drive.
Is this a drive problem or a hardware problem. I am using esata and an esata card. Not sure what the card is.
Any diagnostics.
I ran a verify and repair permissions and was told the drive is OK.

Do this:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.

Configuration or hardware problem?

Similar Messages

Maybe you are looking for