Configuration part for the activation of plant maintenance

Sir/Madam
i have to implement SAP in metrology for gauge/instrument updation. What are the configuration i have to do for that?

Hello Tanuja,
For the link from Portal to work, the SPRO configuration should be in place.  Every link in Portal should have a corresponding Service/Resource in SPRO. 
Refer this link - [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e05d564f-6e1c-2d10-42b2-9e21a211950d|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e05d564f-6e1c-2d10-42b2-9e21a211950d]
If you still face problems configuring, provide exactly where you are facing the problem and also more information on the same.
Cheers
Madhu

Similar Messages

  • Configure the Change Log for the activity

    Hi to all,
    I would like to know if it is possible to configure the "change log" for the activity.
    Thanks in advanced,
    Matte

    Carlos,
    Can you be more specific on the term 'Configure'.  Change log is automatically generated by SBO.  The only thing you can change is the numbers of Historical instances of the log
    Administration > System Initialization > General Settings.......Services Tab...History or Log Settings.  Be default it is 99 instances.
    Suda

  • The value  is not allowed for the field Cross-plant CM

    Hello All
    When i copy material in refernce to existin gone. I am getting this message
    "The value  is not allowed for the field Cross-plant CM"
    I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
    Any help will be good...Thanks in advance...

    Hi,
    Please check the check box in front of the field config material is checked?
    If so then this material is configurable material
    A material that can have different variants.
    For example, a car can have different paint, trim, and engines.
    Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
    Please check
    BR
    Diwakar

  • Memory could not be allocated for the activation process. Please close all applications and try agai

    I have just had a Windows XP failure and took the opportunity to replace with Windows 7.  After I reinstalled PhotoShop CS(1) the message "Memory could not be allocated for the activation process. Please close all applications and try again"  is shown and forces PhotoShop to close.  I have 4Gb of Ram installed and a total of about 10Gb of Page File space on three partitions of a 500Gb HDD.  The system is not heavily loaded!  However, I cannot access Photoshop to check scratch disk allocation.  How to fix???
    Back to top

    Yes, there are many forums, and it can be confusing. Your question has the best chance of being answered if it is in the proper place. I think it is there now.
    Pattie
    http://forums.adobe.com/message/5092533#5092533  is your post address
    Download and installation forum:
    http://forums.adobe.com/community/download_install_setup

  • Memory could not be allocated for the activation process. Please close all applications and tr again

    Hello,
    Just purchased a new laptop:
    Intel Core 2 quad
    4gb memory
    1000 HDD
    Photoshop CS 8.0 disc dead/scratched/unreadable.  So I copied my Adobe folder from my Program Files Folder on my PC and pasted on laptop.  When I try and run PS I get the error message "Memory could not be allocated for the activation process. Please close all applications and try again". Which I do then Photoshop closes.
    Can anyone help (in layman terms please)?

    Not really. You are essentially FUBARd. Without a proper install, there is usually no way on to get the licensing stuff working. You might be able to get there by installing any other CS product, so PS could latch on to the licensing system that would be already in place, but otherwise it's a lost cause. Simply copying over the executables is normally not enough. I will admit though, that I skipped CS, so there may be some tool somewhere that I don't know about can do this post facto...
    Mylenium

  • Memory Could Not Be Allocated For the Activation of PhotoShop

    CS2 Intel P4 3.0GhzHT, 3-4GB Ram WinXP
    Photoshop won't open for me. It used to. Any idea how I might fix this?
    When I try to open Photoshop, I get "Memory could not be allocated for the activation process. Please close all applications and try again."
    I've done this with no applications after a fresh reboot and get the same message.
    It only started recently. Photoshop used to open for me and was usable.
    I got 3 or 4 GB of ram. I can't remember, but WinXP only sees about 3GB anyway. Either way should be more than enough, no?

    Lee71 wrote:
    hey john, thanks for resuscitating the topic. I on XP and it’s PS8
    I have defragged, cleaned disc, etc.
    In terms of symptoms, PS opens up and once open the prompt comes up. I hit okay and it shuts down.
    i have tried CTRL + ALT + SHIFT whilst PS boots up; i get the prompt "ÿou currently have Adobe Photoshops primary Scratch and Windows' primary paging file on the same volume, which can result in reduced performance. It is reommmended that you set PS Primary Scratch Volume to be on a differrent volume, preferably on a different physical dirve."
    I guess this means reinstall, partition and  set up on a partitioned drive? I don't particularly want to take this course of action if there is an alternative. It doesn't make sense given I've got plenty of space.
    No no need for that!
    The message about the scratch drive is normal: the CTRL + ALT + SHIFT resets the preferences to the default for a single HDD. If you have more than one, go into Edit > Preferences > Performance and set the primary scratch drive to the one without the paging file.
    Once you have OK'd that message it should go away if you do only have one HDD.
    Partitioning will not do anything. The object of the separate drives (if you have them) is to avoid conflict between Scratch and Page file.
    Do you still have your original problem?

  • Check In failed for the activity

    Hi,
        Here we have developed a Webdynpro application through JDI. We have created an activity for the application. The application is working fine, but we are facing the problem with the check in. It is saying check in failed for the activity. Below are the deatils about the exception occured while check in.
    13:31:51.546  UPLOAD  (FAILED: Upload file content on repository failed)  Create.wdview.xlf   (C:\Documents and Settings\Suresh.Bachimanchi\.dtc\4\DCs\company\example\_comp\src\packages\com\abc\example\vac\create\Create.wdview.xlf)
    13:31:51.546  CHECKIN  (FAILED: Upload file content on repository failed)  ExampleApp  (act_w_test_example_2e_com_FPM_DEV_dev_inactive_u_cmsuser_t_2006_10_09_12_46_38_GMT_6ba2c1c6-6897-4411-ab2c-808649ab567c)
    Regards
    Suresh

    Hi,
    Refer to the flwg link,
    http://help.sap.com/saphelp_nw04/helpdata/en/21/1cdf3f3e054e1de10000000a155106/content.htm
    Hope it helps.
    Regards
    Srinivasan T

  • Failed to load the configuration file for the workflow

    Hi experts, yesterday I created and publish custom workflow using SPD from client pc using site administrator account but today its shows error message. I tried creating new test workflows, edit and publish to think it will push a fresh SPD settings
    in working condition and it works pretty right.
    But the thing I noticed after closing SPD Im not able to re-open workflows and it gives the same error message Failed to load the configuration file for the workflow. This issue only happen today since day one  I used SPD and all the time
    Im using the same pc.
    Any ideas will be appreciated.
    Cheers, R2C3 ----------------------------------- starting sharepoint :)

    HI
    Maybe you have permission problem or there is invalid xoml murkup.
    To verify this from SharePoint Designer use the following steps.
    In Office SharePoint Designer, in the folder list, select the plus sign next to Workflows library to expand it
    1.Next select the plus sign of the workflow in question to expand it
    2.Double-click the configuration file (Workflow_name.xoml.wfconfig.xml) to open it
    3.Right-click on the page, and then select Verify well-formed XML
    4.Correct any errors and save the file
    5.Reopen the workflow to test
    Also double check that you are using SPD with the same credentials you created workflow
    Hope this will help.
    Regards,
    Marcin

  • Failed to load configuration file for the workflow

    There are two of us who have full control on our Sharepoint 2013 site. I'm able to create workflows and publish them fine. The other user is able to create workflows, but he gets an error when trying to run them. I  tried opening his workflow and got
    the error "Failed to load configuration file for the workflow."
    Any ideas?

    Hi Carltonw1,
    Based on your description, I recommend to verify the things below:
    Clear the SharePoint Designer cache and then open the workflow.
    Ask the user to open the workflow in SharePoint Designer and check if the workflow contains error.
    Ask the user to create the same workflow and associated with another list to see how it works.
    Check the ULS log for more detailed error message.
    To reproduce this issue, could you please provide the detailed steps in the workflow for further research?
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Can anyone say me the Configuration material for the ECC 6.0 FI/CO

    Hi everybody
    Can anyone say me the Configuration material for the ECC 6.0 FI/CO
    thanks n regards
    venuprasad

    Hi
    please refer
    http://www.sap-img.com/
    http://www.surya-padhi.net
    hope this helps
    pushkaraj

  • WD4VC Callable Object: No parser configuration entry for the tag Invoke

    I am trying to use a Visual Composer model as a callable object. I can deploy OK (as a Web Dynpro model, having checked the copmiler options "Deploy Model with PAR" and "Add Guided Procedure information").
    When I try to test the Callable Object, I get the following error:
    com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No parser configuration entry for the tag Invoke.
    No idea how to get around this.
    Any help greatly appreciated.
    Kind Regards,
    Tony.

    Hi Mario,
    We have only three runtime in VC 7.0
    1. XGraph
    2. Flash
    3. Webdynpro.
    In your blog on wiki Flex runtime is mentioned  as given below:
    Webdynpro runtime is not fully supported in NW04s and some tags may not be supported as stated in the error. The reccomendation is to use the flex runtime.
    Is Flex runtime and  Flash runtime is same ,
    I have tried to deploy the model in Flash runtime and  Portal runtime error ocurs by diasply renderning JSP Component,
    But when i deploy it in Webdynpro runtime , it works fine for displaying data in Table.But gives error :No parser configuration entry for the tag ChartView , when i used chart in place of table .
    Thanks.

  • Asking for the activation and will finish in 3 days

    i have downloaded office pro 2013 60 day evluation and installed asking for the activation 
    i log into my account but over there i dont see and office pro enterprise, 
    is there a key for the trial thanks
    Prosysco

    Hi,
    Where did you download the Office?
    If you downloaded Office from TechNet Evaluation Center:
    http://www.microsoft.com/en-us/evalcenter/
    The trial product key should be provided on the downloading page and you may not be able to find it in your account. It should be like this below:
    Regards,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here.

  • I am trying to use an external HD and need to configure it for the MAC. Can someone explain how to configure the HD (Western Digital - My Passport SE)?

    Can someone help explain how to add an external HD to the Mac? I have a Western Digital My Passport SE and need to configure if for the MAC and add it to the HD location on my Mac.

    Connect the external drive to the Mac. You can do that while the Mac is on, (If the drive is one that has to be plugged into a wall outlet do that too and turn the power on.) If there is a light on the drive it should turn on.
    Now double click on the hard drive icon - top left of the screen of your computer. When it opens look for the Applications folder. Double click that. Next look for a folder called Utilities. Double click. In there you will see a file called Disk Utility.app. Double click on that.
    You will now see something like this, with two items on the left. The second one is your new drive.
    Select it - one click. And click on Erase - one of the buttons at the top, You will see this.
    You must select the Format, it's a drop down - the one shown in the image above is best. You can change the name from Untitled if you want. The name can be changed later if you prefer.
    At this point look at the bottom right. There is a button there called Erase. Click on it. Then go get yourself a cup of coffee - this will take a few minutes.

  • Reset  SMD-Configuration data for the solution

    Hello!
    I would like to know how to reset the configuration data for the solution in SMD wizard.
    The solution has already the status "green" --> "This solution is ready for Diagnostics".
    The problem is that I cannot change the settings for the server ("Setup parameters").
    The instance number there (98) cannot be changed.
    Further question:
    how to install the introscope agent via SMD Wizard?
    If I choose the solution and press "Setup Introscope Agent" I get the warning:
    The landscape definition of the selected system is empty. Operation has been aborted
    Furthermore I cannot see any parameters:
    neigther for Server Node Details nor for Current VM Parameters. Here I get the warning:
    There is no detail available for this server node. Check the Last Operation Result pane for more information.
    Any helpful information wil be appreciated.
    Thank you very much!
    regards
    Thom

    Hi Thom,
    To reset configuration there is possibility to remove Landscape Info using
    Diagnostics Administration -> Diagnostics System -> Landscape management.
    For your issue with Wily, you must have a solution correctly define. this setup will not work until you have it.
    Frederic

  • No parser configuration entry for the tag ChartView

    Hi All,
    We have created chartview in VC 7.0 but getting below error while deploying in webdynpro runtime.
    <b>com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No parser configuration entry for the tag ChartView</b>
    Rohit

    Hi Mario,
    We have only three runtime in VC 7.0
    1. XGraph
    2. Flash
    3. Webdynpro.
    In your blog on wiki Flex runtime is mentioned  as given below:
    Webdynpro runtime is not fully supported in NW04s and some tags may not be supported as stated in the error. The reccomendation is to use the flex runtime.
    Is Flex runtime and  Flash runtime is same ,
    I have tried to deploy the model in Flash runtime and  Portal runtime error ocurs by diasply renderning JSP Component,
    But when i deploy it in Webdynpro runtime , it works fine for displaying data in Table.But gives error :No parser configuration entry for the tag ChartView , when i used chart in place of table .
    Thanks.

Maybe you are looking for