Configuration Picking List in MM

Hi Guys
Can Someone help me to configure a Picking list in MM ? I need to generate a picking list in VL02n after picking realized.
I didin´t get a picking list because the message type EK00 wasn´t created in VL02n. How and Where can I configurate This ?
Regards,
Marcelo Buosi.

Hi.
Check the below path:
SPRO-->Enterprise Structure>Definition-->Logistic
Execution-->Define, copy, delete, check Shipping Point-->Select Shipping point and go in for
Details -
>This screen has Print Picking List----> Output Type -
> You can select EK00
SPRO---- > Logistics Execution -
> Shipping -
> Basic Shipping Functions ---> Output
Control -
> Define Print Parameters Shipping
For more e check the links
Re: Picking List output for WM
Regards,
Biju K

Similar Messages

Picking List configuration For user

Hi Friends
I do not know how to configure picking list for user ,
We are maintaining WM at Plant .
I would request you to mention entire process step by step which may help me to understand picking list configuration in totality .
Thanks In Advance
Jaya

Hi,
You can do this in the transaction OMLV -> 'Print Code', Form name depends on the print code. Few are here with.
Single print / TO item          LVSTAEINZEL
Multiple print / TO          LVSTALISTE
Single print for ref.no.          LVSTAEINZEL
Multiple print ref.no.          LVSTALISTE
Picking list version 1          LVSKOMMIL1
Picking list version 2          LVSKOMMIL2
Posting change notice          LVSUMBUCHEN
Single printout w. kanban          LVSTOSOLOKANBAN
Single printout w.kanban          LVSSAMMELKANBAN
Best Regards,

Pick list configuration

Hi friends
There is critical issue that i need to configure the picklist out put. Please explain me step by step configuration, assignment, out put type used,condition record and from where we have to generate the pick list out put? whether in delivery? here they have configured delivery out put as packing list out put and it is assigned to LF. PLEASE NOT THERE IS NO LEAN OR WEAR HOUSE MANAGEMENT.
Regards
KRN

HI nkr
TRy to print pick list using tcode VL10B.
Form name : LVSKOMMIL1
Print program : RLKOMM40
Configurations are done in tcode OMLV. Form is maintained under Print Code and print program under Multiple processing of OMLV.
VL10B is able to create delivery note in background
check the settings in NACE for this picking Output type, Print program and Script form Whether this output type is triggering the form or not?
You can also use the Smartform for picking
/SMB40/SDPIK_L
try with transaction OPK8
Reward if useful to u

*configure the Picking list(PL) output type,a smart form for PL.

Hello SIR,
I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
thanks,
agilarasan

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

Configure a Picking List

Hi guys.
I need to configure the picking list(LT31), to sort by type pos. origin for one especific storage system Someone can said how can do this ?
Thanks !
Marcos Cesar

Config node
Logistic Execution - Warehouse Management - Activities- Define Print Control
Here create a sort profile as you require eg Storage type, Bin etc
Assign this sort profile to your print code for multiple print
The Print code for multiple processing, you can check in the same config node in multiple processing..probably your are using the std program RLKOMM00..check the assigned PC for ur WH.

Configuring printer for pick list

Hi All,
please let me know how and where do we configure the printer for a pick list.
thanks in advance for your help.

Hi Friend,
The printer configration will be done not only for Pick list, it will be for PACK LIST, invoices, ORDER CONFIRMATIONS, DELIVERY NOTE,
For any activity we need to configure the printer in Spool Administration via the transaction code
SPAD.
Please revert back if u need any further clarification,
santosh

Pick List Will Not Print On Add with SAP B1 2007A

There appears to be a bug with printing pick lists on Add with SAP B1 2007A. I have replicated the problem with PL03, 06 and 08.
Pick lists will print manually, but if you have them setup to print on add (Administration->System Initialization->Print Preferences), the following error in the log will appear:
Error Default report not found for current report type; set a default report and try again C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=6104 TID=1672
I ran a SQL trace and found the problem. The default Pick List report is set and set correctly in tables RTYP and RDOC. The problem is that SAP is looking for a RTYP.CODE value of PKL1 (instead of RLR2). PKL1 does not exist as a code in either 2005 or 2007. The Pick List document ID is RLR20001.
To confirm this on my demo database, I updated RTYP and set the CODE of RLR2 to PKL1. Afterwards, when adding a Pick List, it printed without any errors. I suppose another temporary fix would be to add a new record to the RTYP tabe with a CODE of PKL1 and the default pick list report document ID.

After many hours of inquiring, searching and digging... There is an obscur SAP Note that says clearly, NOT SUPPORTED.
Best thing I could do, was to keep a server with the same configuration ready to connect to my SAN and take over from the dead server.
So for anyone interested in this topic. Save you time, search the SAP Notes for Support and high availability.
Hope that helps others.

Error printing pick list from IW32

Hi all,
When trying to print pick list from transaction IW32, I get this error message:
Express document "Update was terminated" received from author ...
When I checked out this error message in SM13, I found this:
Transaction code: IW32
Module name (function): PM_ORDER_PRINT_CONTROL
Status: Update was terminated
Raise exception: KEY_NOT_FULLY_SPECIFIED (Complete key not entered)
The shop paper (pick list) is customer defined (Z*) under application area O (Maintenance orders). This shop paper is set up to print to a certain printer, P1, and printing other PLM documents on this output device works fine.
Does anyone have an idea what can be causing this error?
All helpful answers will be rewarded.
Best regards,
MV

Hi,
I have tried to print the pick list several times, in development, test, and production systems. It fails with the same error each time.
Do you have any ideas why this error occurs, is there any special IMG activity or PLM configuration that I could check to see if some printer settings are wrong?
Regards,
MV

Printing problem for picking list

Hi friends,
Whenever we print the picking list of material with batch number. the printing job will bring a extra page with basic form information . it's kind of wasting the paper since the extra page doen not contain any specific picking informations. This issue only happen to picking list with batch number applied material . The extra page won't be printed out once the material is not subjected to batch management.The form style should be script form.
Please kindly advise if you have any suggestions.
Thanks,
LG

Hi,
Assuming printing job is batch job. Normally batch job executes a program (you assign program to the batch job when you configure it) while you create batch jobwhile it is running. If you want the system to check the particular information (take the information if the so and so prerequisits matches if not ignore kind of) during the program execution you can do it with the hlep of a deverloper.
If you want to avoid unnecessary basic ifnormation it can very well be done with the layout changes in SAP script form and the program if necessary. Make sure you dont need those information as some times it is like a legal information like we see in the company signatures which seems like basic information.

Picking List Output in ECC 6.0

Hello SAP Gurus,
Can anybody tell me how to get the output for Picking List in ECC 6.0.Please do let me know the steps to be followed in configuration for the same for output generation.
Thanks & Regards,
Sunil

Hi,
The Pick List is printed from the Pick and Pack Manager.
goto Inventory > Pick and Pack > Pick List and then Open the Pick List and Print from there.
If this is what you are doing then if your FMS are set to Auto Refresh then as soon as your Pull the Pick list the FMS should fire and the mode should change to UPDATE.
Alternatively,
you can do this by customizing a report with your needed fields with ABAP person.
regards,
Siddharth.

CO27 Pick List

Hi,
In transaction CO27, we would like to add ON-HAND stock quantity as one of the report column. But unfortunately, this field is not available under the option Prof. field select through configuration tcode KOMM. Does anyone know of a way to add new fields to transaction CO27? .
I am working on WM/PP matl staging scenario.
We need a system generated pick list which needs to take the Quantity on Hand into account and provide a pick list by deducting the amount.
Example:
QOH: Mat X 20 EA in Supply Area
For Prod Order XXXXX, we need Mat X 100 EA
So, the TR should be created for 80EA.
Is it possible??
Thanks.,
sen
Please advice.

Use COIK
Regards
Ram

Pick list- Re-print

hi-
I have already printed a pick list for delivery.
Accidently the Document got shredded.
I want to print the Pick list again.
Any suggestions.
Steps: I did go to VL02n and try to use the functionality Picking out at header level, but the area is greyed out and does not give me the option to type EK00 to printout the Pick list again.
Any suggestions / recommendations!!!

Hi,
Also If you have configured LL01 report in your system you can take print out of pick list for the unconfirmed transfer orders again. In report you have to set up layout to take bin details.
Hope this meet your requirment.
Regards,
Prashant

Two pick list output types

Hi,
I have a requirement related to pick list output types. A pick list output type is already configured and assigned to shipping point and is used for taking pick list for SD customer delivery.
I want to create another pick list output type which is to be assigned to same shipping point for subcon delivery alone.
How can I configure it?
Your inputs please.
Regards,
Siva

No feedback

Printing immedietely of Putaway list or Pick list in SAP WM

Hi
We have one requirement in WMS rollout is:
For automatic background printing of Putaway list or Pick list in SAP WM, System doesnt recognize Printer name as LOCL (settings in T code- OMLV). In OMLV we must have a network printer name for automatic printing the Putaway List after MIGO transaction and also for automatic printing the Pick List in Background with WMTA out put type - which triggers during delivery creation.
If we configure LOCL in OMLV screen the spool gets generated but it doesnt execute automatically and that needs to be triggered manually using T code SP02 or SP01.
We want to print these putaway or pick list automatically(either thru LOCL or network printer) immediate after generating a spool(without any user interaction).
Regards,
MM

Hi MM,
Inorder to get automatic put away list after GR you need to define the printer in OMLV settings.
Step 1:
If you are using Ricoh printer (Paper print out of TO) and Zebra Printer (Label printer for printing labels), you need define this combination under the icon "Printer pool/Labels".
Warehouse - Ricoh printer name - Zebra printer name (Pre-condition : Both the Ricoh and Zebra printers needs to be configured in SAP by your Basis team).
Step 2:
Under icon "Warehouse Movement" in the Assignment section, you need to define the condition for printing.
For example
Warehouse no: Source str type Destination str. type Printername
AB1 902 *** Ricoh printer name1
AB1 Q01 *** Ricoh printer name2
The above situation prints all put away list for receiving area to Ricoh printer name 1 & all put away list cleared by QA people to Ricoh printer name 2.
Step 3:
Analyze the condition set under the icon "Analyze" (print control tables).
You can re-check the conditions set by you in the above section. specify the warehouse number, source str type, dest. str type and execute you should be getting the printer name correctly assigned in the earlier section.
Hope the above explanation helps. Pls award points if you feel appropriate.

Picking List output

Hello Experts,
I have configured the picking List output type to print the picking list at the time of delivery creation. However, when i change the delivery quanitity or picking quantity, it is printing the output document. How can i avoid this situation, i want it to be printed only at creation not on changes to the delivery document. Please advise
Thanks

Hi!
I think you need to ensure that "Multiple issuing" check box in v/34 is switched off for the corresponding output type.
Regards,
Raghukul Tilak Mokirala

Configuration Picking List in MM

Similar Messages

Maybe you are looking for