Configuration Problem at Step 3 (PIP server Details)

Hi All,
I am facing problem in Configuring the Project Portfolio Management: Primavera P6-EBS Projects PIP...when i enter in to the PIP Server details screen..and filled the following details:
where as Domain name and admin port and host are default as i did in the same for domain name,admin port,host...i gave the Admin user,Admin password..fields after that when i click on Managed server dropdown menu i am getting following error:"Cannot connect server".I checked with managed server and admin server both are running only but still am facing problem...
So,Please can any one helpme to find the solution for my problem..It is very essential.
Thanks in Advance

Did you fix that problem???
I got exactly the same one and would need an idea!
Many thanks
Roland
[email protected]

Similar Messages

  • IPMP Configuration problem in SUN 1290 Server

    I am facing problem with IPMP Configuration.
    server a is having configuration like :-
    ce2  :- 97.241.213.152 - Physical IP
    ce6  :- 97.241.213.163  - Physical IP
    ce 2:1  :- 97.241.213.162  - Virtual IP
    ce2: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3
    inet 97.241.213.152 netmask ffffff80 broadcast 97.241.213.255
    groupname ipmp1
    ether 0:14:4f:95:c8:38
    ce2:1: flags=9140843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,ROUTER,IPv4,NOFAILOVER> mtu 1500 index 3
    inet 97.241.213.162 netmask ffffff80 broadcast 97.241.213.255
    ce6: flags=9140843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,ROUTER,IPv4,NOFAILOVER> mtu 1500 index 7
    inet 97.241.213.163 netmask ffffff80 broadcast 97.241.213.255
    groupname ipmp1
    ether 0:14:4f:95:c8:38
    IPMP Is working Fine in this server
    same way server b is having configuration :- (Here port ce2 was having problem so we have shifted to port ce1)
    ce1 :- 97.241.213.154 - Physical IP
    ce6 :- 97.241.213.165 - Physical IP
    ce1 :1 :- 97.241.213.154 - Virtual IP
    ce1: flags=19100842<BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4,NOFAILOVER,FAILED> mtu 0 index 3
    inet 0.0.0.0 netmask 0
    groupname ipmp1
    ether 0:14:4f:95:c8:60
    ce1:1: flags=19140843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,ROUTER,IPv4,NOFAILOVER,FAILED> mtu 1500 index 3
    inet 97.241.213.164 netmask ffffff80 broadcast 97.241.213.255
    ce6: flags=9140843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,ROUTER,IPv4,NOFAILOVER> mtu 1500 index 7
    inet 97.241.213.165 netmask ffffff80 broadcast 97.241.213.255
    groupname ipmp1
    ether 0:14:4f:95:c8:60
    ce6:1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 7
    inet 97.241.213.154 netmask ffffff80 broadcast 97.241.213.255
    I know that in above configuration of server b there is some mistake but not able to find? Kindly provide proper configuration with command also.
    I have attached hostname.ce1 output also for server b
    ######## hostname.ce1#############
    serverb-DCN netmask + broadcast + group ipmp1 up addif serverb-ce2-test netmask + broadcast + deprecated -failover up
    ######## hostname.ce6#############
    serverb-ce6-test netmask + broadcast + group ipmp1 deprecated -failover up

    for the first system:
    ifconfig ce2 97.241.213.152 deprecated -failover group ipmp1 up
    ifconfig ce6 97.241.213.163 deprecated -failover group ipmp1 up
    ifconfig ce2 addif 97.241.213.162 upfor the second system (server b):
    ifconfig ce1 97.241.213.154 deprecated -failover group ipmp1 up
    ifconfig ce6 97.241.213.165 deprecated -failover group ipmp1 up
    ifconfig ce1 97.241.213.164 upMake sure you assiganed the deprecated and nonfailover flag to your physical ip(test ip) not the virtual ip.
    and check your net work connection as well.
    ce2 and ce6 on server a should in the same subnet.
    ce1 and ce6 on server b should in the same subnet too.
    Edited by: Alicia.tang on Aug 5, 2008 5:05 PM

  • Weblogic Plugin Configuration Problem -- no more in server list

    HELP! Has anyone seen anything like this before. What we are seeing
              is that the plugin sporadically sends requests to the wrong weblogic
              instance. When it sends it to the wrong instance we are seeing the
              following in the wlproxy.log. Like I said, this happens sporadically.
              Sometimes it will work just fine for an entire transaction. Does
              anyone know what the "no more in server list" means. We've had bea on
              the phone for the last 12 hours and they haven't been able to help us
              up to this point. If I need to send any more information please let
              me know....
              Thanks in advance!!!
              Jeremy Martin
              ========New Request: [POST
              /ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000
              HTTP/1.1] =========
              Wed Mar 20 08:45:14 2002 Content-Length=368 clength=0
              Wed Mar 20 08:45:14 2002 Going to get the post data of size 368
              Wed Mar 20 08:45:14 2002 SEARCHING
              id=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001]
              from current ID=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001]
              Wed Mar 20 08:45:14 2002
              @@@FOUND...id=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001],
              server_name=[p02n0310.it.sprintspectrum.com], server_port=[80]
              Wed Mar 20 08:45:14 2002 Init:
              availcookie=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              COLORS=spring; ZIPCODE=64119]
              Wed Mar 20 08:45:14 2002 PRIMARY 207.40.168.118:7001 no more in server
              list
              Wed Mar 20 08:45:14 2002 The request string is
              '/ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000'
              Wed Mar 20 08:45:14 2002 After trimming path:
              '/ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000'
              Wed Mar 20 08:45:14 2002 Now trying whatever is on the list;
              ci->canUseSrvrList = 1
              Wed Mar 20 08:45:14 2002 AttemptConnect(): Srvr# [1] =
              [207.40.168.115:7001]
              Wed Mar 20 08:45:14 2002 AttemptConnect(): Srvr# [2] =
              [207.40.168.13:7001]
              Wed Mar 20 08:45:14 2002 general list: trying connect to
              '207.40.168.13'/7001
              Wed Mar 20 08:45:14 2002 Connected to 207.40.168.13:7001
              Wed Mar 20 08:45:14 2002 Headers from the client [Accept]=[*/*]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [Accept-Encoding]=[gzip, deflate]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [accept-language]=[en-us]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [Cache-Control]=[no-cache]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [Content-Length]=[368]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [content-type]=[text/xml]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [Cookie]=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              COLORS=spring; ZIPCODE=64119]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [Host]=[rmsweb.intranet.sprintspectrum.com]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)]
              Wed Mar 20 08:45:14 2002 Sending header to WLS [Accept]=[*/*]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [Accept-Encoding]=[gzip, deflate]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [accept-language]=[en-us]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [Cache-Control]=[no-cache]
              Wed Mar 20 08:45:14 2002 Sending header to WLS [Content-Length]=[368]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [content-type]=[text/xml]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [Cookie]=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              COLORS=spring; ZIPCODE=64119]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [Host]=[rmsweb.intranet.sprintspectrum.com]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [X-WebLogic-Force-Cookie]=[true]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [Proxy-Client-IP]=[207.167.161.73]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [X-Forwarded-For]=[207.167.161.73]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [x-weblogic-cluster-hash]=[fw44lcQkjNI+PhjBPgtTl5Qwmi4]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [HTTP/1.1 200 OK]
              = []
              Wed Mar 20 08:45:16 2002 Header received from WLS : [Server] =
              [WebLogic 5.1.0 Service Pack 11 11/20/2001 08:39:10 #149952]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [Content-Length]
              = [622]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [Content-Type] =
              [text/xml]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [X-WebLogic-Load]
              = [0]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [Set-Cookie] =
              [WebLogicSession=PJigemmFCOSmpZvQ8VD8AEn7t7RtPEEbSQqarpCmUYbNZ5nhoL9j|-9091816865617485599/-819419123/6/7001/7001/7002/7002/7001/-1;
              expires=Sunday, 11-May-2003 06:45:16 GMT; path=/]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [Connection] =
              [Close]
              Wed Mar 20 08:45:16 2002 Headers to the client [Server]=[WebLogic
              5.1.0 Service Pack 11 11/20/2001 08:39:10 #149952]
              Wed Mar 20 08:45:16 2002 Headers to the client [Content-Length]=[622]
              Wed Mar 20 08:45:16 2002 Headers to the client
              [Set-Cookie]=[WebLogicSession=PJigemmFCOSmpZvQ8VD8AEn7t7RtPEEbSQqarpCmUYbNZ5nhoL9j|-9091816865617485599/-819419123/6/7001/7001/7002/7002/7001/-1;
              expires=Sunday, 11-May-2003 06:45:16 GMT; path=/]
              Wed Mar 20 08:45:16 2002 r->status=200 returning 0
              Wed Mar 20 08:46:58 2002
              

    This one sound stricky. Have you checked all the usual suspects:
              -same cookie name in WB-INF/weblogic.xml and the cookiename set in
              plugin settings (defualts to JSESSIONID in 6.x)
              -network errors between web servers and WLS servers
              That utility can be invaluable in solving problems like this.I have seen
              session settings cause sessions to be lost, but never the message you
              are talking about. Try turning on the "DebugConfigInfo" setting and see
              what the "?__WebLogicBridgeConfig" page can tell you about your
              settings, what server list it is using and what servers are
              primary/secondary. One tip, you need to hit the WLS server one time, and
              then use the "?__WebLogicBridgeConfig". Until it communicates with the
              WLS server, it can only tell you it's own settings and not any
              information about up servers and primary/secondary assignements. Also
              look to make sure each server in the "Server List" has a blue ":OK" next
              to it to signify the plugin can see them.
              Hope that can help, though I am not sure they will deal with the problem
              you are seeing. Make sure you post the outcome to this issue, I will be
              very interested in seeing it.
              -Mark Vaughn
              Jeremy Martin wrote:
              >HELP! Has anyone seen anything like this before. What we are seeing
              >is that the plugin sporadically sends requests to the wrong weblogic
              >instance. When it sends it to the wrong instance we are seeing the
              >following in the wlproxy.log. Like I said, this happens sporadically.
              > Sometimes it will work just fine for an entire transaction. Does
              >anyone know what the "no more in server list" means. We've had bea on
              >the phone for the last 12 hours and they haven't been able to help us
              >up to this point. If I need to send any more information please let
              >me know....
              >
              >Thanks in advance!!!
              >
              >Jeremy Martin
              >
              >========New Request: [POST
              >/ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000
              >HTTP/1.1] =========
              >Wed Mar 20 08:45:14 2002 Content-Length=368 clength=0
              >Wed Mar 20 08:45:14 2002 Going to get the post data of size 368
              >Wed Mar 20 08:45:14 2002 SEARCHING
              >id=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001]
              >from current ID=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001]
              >Wed Mar 20 08:45:14 2002
              >@@@FOUND...id=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001],
              >server_name=[p02n0310.it.sprintspectrum.com], server_port=[80]
              >Wed Mar 20 08:45:14 2002 Init:
              >availcookie=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              >CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              >CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              >COLORS=spring; ZIPCODE=64119]
              >Wed Mar 20 08:45:14 2002 PRIMARY 207.40.168.118:7001 no more in server
              >list
              >Wed Mar 20 08:45:14 2002 The request string is
              >'/ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000'
              >Wed Mar 20 08:45:14 2002 After trimming path:
              >'/ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000'
              >Wed Mar 20 08:45:14 2002 Now trying whatever is on the list;
              >ci->canUseSrvrList = 1
              >Wed Mar 20 08:45:14 2002 AttemptConnect(): Srvr# [1] =
              >[207.40.168.115:7001]
              >Wed Mar 20 08:45:14 2002 AttemptConnect(): Srvr# [2] =
              >[207.40.168.13:7001]
              >Wed Mar 20 08:45:14 2002 general list: trying connect to
              >'207.40.168.13'/7001
              >Wed Mar 20 08:45:14 2002 Connected to 207.40.168.13:7001
              >Wed Mar 20 08:45:14 2002 Headers from the client [Accept]=[*/*]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[Accept-Encoding]=[gzip, deflate]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[accept-language]=[en-us]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[Cache-Control]=[no-cache]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[Content-Length]=[368]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[content-type]=[text/xml]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[Cookie]=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              >CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              >CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              >COLORS=spring; ZIPCODE=64119]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[Host]=[rmsweb.intranet.sprintspectrum.com]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS [Accept]=[*/*]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[Accept-Encoding]=[gzip, deflate]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[accept-language]=[en-us]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[Cache-Control]=[no-cache]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS [Content-Length]=[368]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[content-type]=[text/xml]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[Cookie]=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              >CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              >CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              >COLORS=spring; ZIPCODE=64119]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[Host]=[rmsweb.intranet.sprintspectrum.com]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[X-WebLogic-Force-Cookie]=[true]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[Proxy-Client-IP]=[207.167.161.73]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[X-Forwarded-For]=[207.167.161.73]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[x-weblogic-cluster-hash]=[fw44lcQkjNI+PhjBPgtTl5Qwmi4]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [HTTP/1.1 200 OK]
              >= []
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [Server] =
              >[WebLogic 5.1.0 Service Pack 11 11/20/2001 08:39:10 #149952]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [Content-Length]
              >= [622]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [Content-Type] =
              >[text/xml]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [X-WebLogic-Load]
              >= [0]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [Set-Cookie] =
              >[WebLogicSession=PJigemmFCOSmpZvQ8VD8AEn7t7RtPEEbSQqarpCmUYbNZ5nhoL9j|-9091816865617485599/-819419123/6/7001/7001/7002/7002/7001/-1;
              >expires=Sunday, 11-May-2003 06:45:16 GMT; path=/]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [Connection] =
              >[Close]
              >Wed Mar 20 08:45:16 2002 Headers to the client [Server]=[WebLogic
              >5.1.0 Service Pack 11 11/20/2001 08:39:10 #149952]
              >Wed Mar 20 08:45:16 2002 Headers to the client [Content-Length]=[622]
              >Wed Mar 20 08:45:16 2002 Headers to the client
              >[Set-Cookie]=[WebLogicSession=PJigemmFCOSmpZvQ8VD8AEn7t7RtPEEbSQqarpCmUYbNZ5nhoL9j|-9091816865617485599/-819419123/6/7001/7001/7002/7002/7001/-1;
              >expires=Sunday, 11-May-2003 06:45:16 GMT; path=/]
              >Wed Mar 20 08:45:16 2002 r->status=200 returning 0
              >Wed Mar 20 08:46:58 2002
              >
              

  • Adobe Access Server for Protected Streaming Configuration Problem

    I cannot get the Adobe Access Server for Protected Streaming sample implementation up and running.  Could somebody help me figure out where I'm going wrong?
    I've configured the license server with the correct PFX files and when I run the validation tool, I get the following output.  This is a clean install with only the license server configuration (the content server is a separate machine).  I also get a similar error in the tomcat logs when I try to access a piece of content licensed to this server. 
    $ java -jar libs/flashaccess-validator.jar -g -r /var/lib/tomcat6/licenseserver/
    Validating global deployment ...
            Validating partition deployment - flashaccessserver...
                    Validating tenant deployment - flashaccessserver/mediafly...Failed to validate tenant deployment 'flashaccessserver/mediafly' - Error reading key server certificate for partition='flashaccessserver', tenant='mediafly'
    See log for details:
    (/tmp/temp281722781181937073071254678876423/flashaccessserver/flashaccess-partition.log)
    $ cat /tmp/temp281722781181937073071254678876423/flashaccessserver/flashaccess-partition.log
    [] 2013-02-12 15:37:26,383 INFO  [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/var/lib/tomcat6/licenseserver/flashaccessserver/libs/, file:/var/lib/tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext -sample.jar]'
    [] 2013-02-12 15:38:41,247 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/mediafly'
    com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading key server certificate for partition='flashaccessserver', tenant='mediafly'
            at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.readCerts(TenantConfigurationImpl.java:720)
            at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.<init>(TenantConfigurationImpl.java:705)
            at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:115)
            at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
            at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
            at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
            at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
            at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
            at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
    Caused by: java.security.cert.CertificateException: java.lang.IllegalArgumentException: unknown object in factory: org.bouncycastle.asn1.DERInteger
            at org.bouncycastle.jce.provider.JDKX509CertificateFactory.engineGenerateCertificate(Unknown Source)
            at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:322)
            at com.adobe.flashaccess.core.crypto.CertUtil.loadCert(CertUtil.java:33)
            at com.adobe.flashaccess.sdk.cert.CertificateFactory.loadCert(CertificateFactory.java:45)
            at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.readCert(TenantConfigurationImpl.java:739)
            at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.readCerts(TenantConfigurationImpl.java:718)
            ... 8 more
    Some additional information:
    $ uname -s -r -v -m
    Linux 2.6.32-350-ec2 #59-Ubuntu SMP Mon Jan 7 14:20:59 UTC 2013 x86_64
    $ lsb_release -a
    No LSB modules are available.
    Distributor ID: Ubuntu
    Description:    Ubuntu 10.04.4 LTS
    Release:        10.04
    Codename:       lucid
    $ dpkg -l | grep tomcat
    ii  libtomcat6-java                                             6.0.24-2ubuntu1.12                Servlet and JSP engine -- core libraries
    ii  tomcat6                                                     6.0.24-2ubuntu1.12                Servlet and JSP engine
    ii  tomcat6-common                                              6.0.24-2ubuntu1.12                Servlet and JSP engine -- common files
    $ dpkg -l | grep jdk
    ii  openjdk-6-jre-headless                                      6b24-1.11.5-0ubuntu1~10.04.2      OpenJDK Java runtime, using Hotspot JIT (hea
    ii  openjdk-6-jre-lib                                           6b24-1.11.5-0ubuntu1~10.04.2      OpenJDK Java runtime (architecture independe
    $ md5sum AdobeAccessProSDK_4_0_LS1_java.exe
    73068d8348cbdc1c29211a463a58b8df  AdobeAccessProSDK_4_0_LS1_java.exe
    Thanks,
    Bryan

    I found the problem. 
    Certificates/KeyServer/File[@path] needs to be set your license file, but it must be in the ".cer" format.  The server won't start without this fileand it was not mentioned anywhere in the quick start guide but is mentioned in the protected streaming document.
    Bryan

  • Problem while configuring webutil on oracle application server 10g(9.0.4)

    hi,
    I have configured webutil with oracle application server 10g(9.0.4).JInitiator 1.3.1.17 is installed.
    I did everything according to webutil manual.Then i developed a form using developer suit 10g (9.0.4).
    and successfully compiled and attached webutil library.then i subclass
    webutil object group from webutil.olb into my form,that is also
    subclassed successfully.Form has also been compiled and saved
    successfully.
    also configured my formsweb.cfg,forms90.conf,default.env according to webutil documentation.
    {color:#993366}Now when i run this form from client, it does not show form in the
    browser and shows a message on the client browser console as follows{color}.
    {color:#0000ff}*Applet oracle.forms.webutil.common.RegisterWebUtil*
    {color} {color:#993366}After this message,It does nothing and if i refresh browser,it shows following message in the browser' Console.{color}
    {color:#0000ff}*Applet oracle.forms.engine.Main notinited.*{color}
    Note:In the browser ,loading java applet is also visible.
    how should i resolve this problem?
    any suggestion?
    Its urgent.
    Regards,
    abbasyazdani

    Refer this metalink note,
    566628.1 How To Install Webutil on 10g Oracle AS
    [email protected]

  • Steps  to configure the Business ware house server to the R/3 Se

    What are the important steps that you do to configure the Business ware house server to the R/3 Server. What are the steps you follow and the auths given at the BW level and the R/3 level.

    What are the important steps that you do to configure the Business ware house server to the R/3 Server. What are the steps you follow and the auths given at the BW level and the R/3 level.

  • Firefox is configured to use a proxy server that is refusing connections. Problem loading page appears. What do I do?

    When clicking onto the Firefox Icon a window pops up stating the following:
    Proxy server is refusing connections
    Firefox is configured to use a proxy server that is refusing connections.
    Problem loading page.
    What do I do?

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]

  • Just started getting this message but don't know how to correct the problem: irefox is configured to use a proxy server that is refusing connections.

    Firefox is configured to use a proxy server that is refusing connections.

    #Click the big orange Firefox button, or open the Tools menu.
    #Click Options.
    #Go to Advanced.
    #Go to Network.
    #Under Connection, click Settings.
    #Choose No proxy, or Use system settings.
    See also:
    *[[Server not found]]
    *[[Error loading web sites]]
    *[[Firefox cannot load websites but other programs can]]
    *[[Options window - Advanced panel]]

  • Problems starting the http server

    I have problems starting 9ias http server. I issue:
    /u09/ora9ias/infra/opmn/bin> opmnctl startall
    opmnctl: starting opmn and all managed processes...
    Request partial success -- 1 of 4 processes started.
    and the HTTP server does not start.
    If I go to the enterprise manager, the only service started is Single Sign On.
    If I try to enter to the HTTP server it gives me the following error:
    An error was encountered while loading page. Failed to initialize configuration management user session.. Repository access failed Root Cause: Password could not be retrieved. Password could not be retrieved
    The iasdb is already started and working.
    Any clues what can be going wrong??
    help is greatly appreciated.

    Jorge, I suspect you've already fixed this problem. But if not, I have a standard operating procedure for this. Here's the gist of it, let me know if you need more detail.
    1. shutdown the opmn layer (opmnctl stopall)
    2. determine if the httpd.pid file exists (it's in the Apache/logs directory on linux)
    3. delete the .pid file if it's there
    4. if not, or if there's still a problem, tail the error_log for info
    5. try to start the httpd (dcmctl start -ct ohs)
    6. still a problem? ps -auxw | grep httpd
    7. kill off the process(es)
    8. try again to start up with dcmctl command in step 5
    I can usually get it going at this point. If not, I have to do a reboot, which has always worked. Don't forget to shutdown the emctl and webcachectl if you're rebooting.
    Hopefully this helps. It took a lot of learn-as-you-go for us to get this procedure. I'm sure the pros will role their eyes! :-)

  • How to Configure Remote Connections To SQL Server 2008 R2 Express

    Post written June 10, 2010 and pertains to:
    SQL Server 2008 R2 Express on both my server and local machines: SQLX_SRV,
    SQLX_LOC
    SQL Server 2008 R2 Management Studio on both my server and local machines:
    MS_SRV, MS_LOC
    Windows Server 2008 R2 Enterprise installed on a Hyper-V VPS: WS
    SQL Server Configuration Manager on both my server and local machines:
    CMGR_SRV, CMGR_LOC
    Server Manager: SMGR
    I am connecting to my hosting server via Remote Desktop Connection: RDC
    I installed SQLX_SRV and MS_SRV on my hosting server and SQLX_LOC and MS_LOC on my local development machine.  I am able to use MS_LOC to connect to SQLX_LOC and to use MS_SRV to connect to SQLX_SRV.  However I am not able to use MS_LOC to connect
    with SQLX_SRV.  Here's what I have done so far:
    SMGR -> Configuration -> Windows Firewall to turn off the Windows Firewall for Domain, Private and Public profiles.  Obviously I'll change this later, but until I can connect I want to remove as many variables as possible.
    CMGR_SRV -> SQL Server Services to confirm that both SQL Server (SQLEXPRESS) and SQL Server Browser services were running.
    CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS to ENABLE the Shared Memory, Named Pipes, and TCP/IP protocols and DISABLE the deprecated VIA protocol.
    CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS -> double click TCP/IP to open the TCP/IP properties dialogue.  On the Protocol tab Enabled: Yes, Keep Alive: 30000, changed Listen All to No.  I've tried it both
    ways, but I've got six IP addresses on my server and I wanted to configure SQLEXPRESS to listen to only the first and primary IP.  On the IP Addresses tab went to IPALL and cleared the TCP Dynamic Ports field and entered 1433 in the TCP Port field. 
    For my first and primary IP Address I made sure that Enabled was Yes, I cleared the TCP Dynamic Ports field, and entered 1433 in the TCP Port field.  For all other IP Addresses Enabled was set to No and I cleared both the TCP Dynamic Ports and TCP Port
    fields.
    CMGR_SRV -> SQL Server Services -> SQL Server (SQLEXPRESS) right click and Restart.  This of course stopped and restarted my instance of SQLX_SRV enabling the TCP/IP configuration in the previous step to take effect.
    On my server, SQLX_SRV is the only instance of SQL Server running and so it's easy to hard wire it to the default port 1433.
    The instance name for both SQLX_SRV and SQLX_LOC is the default "SQLEXPRESS".  My server machine name is "SERVER1" on the EnglishBrains.com domain.  So the proper local name (local within the context of my remote server as connected via RDC) for
    my instance of SQLX_SRV would be:
    SERVER1\SQLEXPRESS 
    Note the use of a backslash NOT a forward slash. 
    Of course to connect remotely from my development machine, which is not on the same domain as my hosting server, I would need to specify the domain as well, so the SQL Server name becomes:
    SERVER1.EnglishBrains.com\SQLEXPRESS
    I must also use SQL Server Authentication.  Before I can use such a remote connection, however, there are still several configuration steps required.  So on my server (connected via RDC) I used MS_SRV to connect to SQLX_SRV using SERVER1\SQLEXPRESS
    for the server name and Windows Authentication.  Once connected I performed the following steps:
    MS_SRV -> right click the connected parent SERVER1\SQLEXPRESS instance node at the top -> Properties -> Security -> Server authentication: select "SQL Server and Windows Authentication mode".  This will enable connections using either type
    of authentication.
    Next, leaving the Server Properties dialogue open, Connections -> check "Allow remote connections to this server" box.
    Click OK to save these changes and close the Server Properties dialogue.
    MS_SRV -> Security -> right click Logins and select "New Login...", the Login - New dialogue opens.
    On the General page Enter a name for your new login
    Select SQL Server Authorization
    Enter and confirm a password
    Uncheck Enforce password expiration
    Select the default Database and Language
    On the ServerRoles page Public will be checked, also check SysAdmin.  This is probably not a good idea and I'll uncheck this as soon as I can connect to the SQLX_SRV.
    On the User Mapping page select the databases you want your new Login to access and enter the Default Schema of "dbo".
    At the bottom of the User Mapping page you'll see the Database Roles table.  Public will be selected by default.  Also select db_Owner.  Again this is probably not a good idea, and I'll refine this once I can connect.
    On the Status page confirm that "Grant" is checked under "Permission to connect to database engine" and "Enable" is checked under "Login".
    Click OK to save all changes and close the Login - New dialogue.
    With these steps completed you should now be able to use MS_SRV to connect to SQLX_SRV using SQL Server Authentication by supplying the name and password for your new Login.  I tried this and it worked fine.  Next I tried to use this same login
    remotely, that is I went to my local development machine and used MS_LOC to try and connect to SQLX_SRV by using
    SERVER1.EnglishBrains.com\SQLEXPRESS
    and opting for SQL Server Authentication and supplying the name and password of my new login.
    THIS DID NOT WORK??  Instead I get the following error message:
    Cannot connect to SERVER1.EnglishBrains.com\SQLEXPRESS.
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
    For help, click:
    http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1
    If you follow the suggested help link, you are told:
    The SQL Server client cannot connect to the server.  This error could be caused by one of the following reasons:
    A specified SQL Server instance name is not valid.
    The TCP, or named pipes protocols are not enabled.
    The firewall on the server has refused the connection.
    The SQL Server Browser service (sqlbrowser) is not started.
    WRONG on all 4 counts!  The instance name IS valid.  Both TCP/IP and Named Pipes protocols are enabled.  The firewall has been shut down, so it is not relevant.  Finally the SQL Server Browser IS started.
    The next thing I tried was to circumvent discovery by the SQL Browser service by using the following syntax to specify the IP address and port directly when specifying the SQL Server name.
    tcp:68.71.134.186,1433
    Using this in the Server Name field I was able to use MS_SRV to successfully connect to SQLX_SRV (using SQL Server Authentication of course) with or without the SQL Browser service running. 
    However when I tried to connect from MS_LOC to SQLX_SRV using this same login (WITH SQL Browser service running just for good measure) it does not work??  I get the following error message:
    Cannot connect to tcp:68.71.134.186,1433.
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
    For help, click:
    http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
    If you follow the help link you are told:
    "The SQL Server client cannot connect to the server. This error could occur because either the firewall on the server has refused the connection or the server is not configured to accept remote connections."
    However, the firewall has been shut down and the server HAS been configured to accept remote connections! 
    I confirmed that i could indeed Ping to 68.71.134.186  and running NetStat -a |find /i "listening" on the server shows that the server is indeed listening at 68.71.134.186 Port 1433 -- which is why I was able to connect to SQLX_SRV using MS_SRV with
    tcp:68.71.134.186,1433 .
    IN SUMMARY: Even though I can connect to my SQLEXPRESS instance multiple ways from the server itself, I cannot connect remotely from my development machine! 
    If anyone can help me figure out why I would be very, very grateful!

    My two cents to help you out on c# code example to configure the remote sql server express.
    Hope it helps. It works, but you have to be extra carefull to read it all and setup the server configuration and netsh commands; also the port fowarding on the router.
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Data.SqlClient;
    namespace sqlremoteconnection
    class Program
    static void Main(string[] args)
    // this is the local sql server connection
    // 192.168.1.101\SQLEXPRESS
    // now, the configuration for remote access:
    // activate SQL SERVER BROWSER - set it to start "automatic"; then START UP
    // SQL Server Configuration Manager
    // --> SQL SERVER BROWSER -> properties -> Service -> Start Mode -> automatic -> apply
    // --> Log On -> Start -> Ok
                // netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = all profile = CURRENT
                // netsh firewall set portopening protocol = UDP port = 1434 name = SQLPort mode = ENABLE scope = all profile = CURRENT
                // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = any profile = PUBLIC
                // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = udp action = allow localport = 1434 remoteip = any profile = PUBLIC
    // VERY IMPORTANT FOR REMOTE ACCESS: you have to add the rules on port fowarding
    // on the router!!!
    // TCP: 1433
    // UDP: 1434
    // or just a personal port like TCP 31433/UDP 31434
    // read carefully the netsh commands above
    // server name: 123.132.24.177\SQLEXPRESS
    // server name: anyurl.myftp.org\SQLEXPRESS,1433 <<-- regular port
    // server name: anyurl.myftp.org\SQLEXPRESS
    // server name: anyurl.myftp.org\SQLEXPRESS,31433 <<-- WOW different PORT here!!!
    SqlConnection myConnection = new SqlConnection(
    "user id=sa;" +
    "password=password_goes_here!;" +
    "server=anyurl.myftp.org\\SQLEXPRESS,31433;" +
    //"Trusted_Connection=no;" +
    "database=database_name_here; " +
    "connection timeout=30");
    try
    myConnection.Open();
    catch (Exception e)
    Console.WriteLine(e.ToString());
    try
    SqlDataReader myReader = null;
    SqlCommand myCommand = new SqlCommand("select * from mytable", myConnection);
    myReader = myCommand.ExecuteReader();
    while (myReader.Read())
    Console.WriteLine(myReader["tab01_name"].ToString());
    Console.WriteLine(myReader["tab01_age"].ToString());
    catch (Exception e)
    Console.WriteLine(e.ToString());
    try
    myConnection.Close();
    catch (Exception e)
    Console.WriteLine(e.ToString());
    Adelino Araujo

  • Error message: a problem connecting to the server "DriveMap"

    I recently uninstalled GoDaddy’s software Workspace, used to manage online storage which I no longer need. Every time I restart my computer, and worse, every time I update an app, put something in the trash, or empty the trash, I get the error message “There was a problem connecting to the server "DriveMap". Workspace (DriveMap) is no longer on my computer; I used GoDaddy’s Workspace uninstaller to remove it. Then I reinstalled and uninstalled again because I was getting that message. I then did a search of my computer for all files with “Starfield” in the title, which is the developer of WorkSpace. I found about a dozen files and deleted them. I’m still getting the message, and GoDaddy support is absolutely useless. I got this reply from them (their 15th reply about this problem).
    It appears that your computer is configured to open a drive, which is occurring during start up.  You will need to edit your computer's drives or start up commands and delete the command that is causing this to occur.  This would not be a file that from Workspace that is causing the issue.  It appears that your local system is still trying a program that no longer exists on the system.  We suggest researching support documentation related to your local system to remove the DriveMap. 
    It has to be a file from Workspace, it seems to me, or a system file that has been altered by Workspace. This didn’t happen before I installed Workspace. It started happening out of the blue... hadn’t added any files to online storage or accessed my online file folder for a month or more, and this event began occurring, at times rendering my computer unusable; that message pops up as fast as I can dismiss it, many many times... Intercepts all key strokes.
    I’ve looked at my account’s startup items; nothing there. And iMacHardDisk/Library/Startupitems has only a backup program in it.
    Has anyone had this problem and found a fix?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • WebUtil's configuration problem

    I have the following problem:
    I installed WebLogic Server 10.3.5, Fusion Middleware (Forms/Reports) 11.1.2 and Oracle XE 11g.
    My environment works correctly, when application don't uses webutil.
    When I open an application that uses WebUtil, happens the following error: "FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502."
    Another error too occurs:
    In the button "Browse" I use client_get_file_name, but the following error is displayed: "oracle.forms.webutil.file.FileFunctions bean not found. WEBUTIL_FILE.FILE_SELECTION_DIALOG_INT will not work".
    To configuring the webutil, I used the book Oracle Forms Developer WebUtil User's Guide Release 1.0.6. My webutil is 1.0.6.
    Any help is welcome
    thanks!

    Just a quick note, questions related to Oracle Forms as well as Oracle Forms and WebUtil integration should be posted in the Oracle Forms section of Oracle Forums: Forms You will receive a quicker response if you post Oracle Forms-related questions in that forum location.
    Anyway, WebUtil 1.0.6 is not supported to use with Oracle Forms and Reports 11gR2. Oracle Forms 11gR2 comes with WebUtil 11.1.2.x (the version which is supported for Forms 11gR2) which the both webutil.olb and webutil.pll are deployed in %ORACLE_HOME%\forms ($ORACLE_HOME/forms in Unix) where ORACLE_HOME is the Oracle Home for your Fusion Middleware installation. Also, if you haven't downloaded it already, you will also need JACOB version 1.14.3 (the version of JACOB supported for Oracle Forms 11gR2) which can be downloaded at http://sourceforge.net/projects/jacob-project/files/jacob-project/1.14.3/jacob-1.14.3.zip/download.
    After JACOB is downloaded, you will need to copy the jacob.jar to %ORACLE_HOME%\forms\java. Using Oracle Support Note 1076945.1, you will need to sign jacob.jar using the sign_webutil.bat script (located in %ORACLE_HOME%\forms\templates\scripts). The note contains steps on how to set up the batch script as well as how to run the script to sign jacob.jar. IMPORTANT: Make sure your JDK is in your PATH environment variable and you run Command Prompt as an administrator; otherwise, jar signing errors may occur.
    Next, place jacob-1.14.3-x86.dll into %ORACLE_HOME%\forms\webutil\win32 and jacob-1.14.3-x64.dll into %ORACLE_HOME%\forms\webutil\win64.
    After that, make sure that the WebUtil schema has been installed into your database. If not, make sure to run the create_webutil_db.sql script (located in %ORACLE_HOME%\forms) as the DB user who will be the owner of the WebUtil schema. Once the DB is ready, compile webutil.pll using Forms Builder or Forms Compiler. Once it is compiled, open up webutil.cfg located in %ORACLE_INSTANCE%\config\FormsComponent\forms\server. Scroll to the bottom and change the following settings:
    transfer.database.enabled=TRUE
    transfer.appsrv.enabled=TRUE
    transfer.appsrv.workAreaRoot=
    transfer.appsrv.accessControl=FALSE
    After you save and close the file, you should be able to run any of your Oracle Forms which use WebUtil without a problem. Oracle Support note 1093985.1 contains more information about setting up WebUtil. Hope this helps!
    Thanks,
    Scott
    http://pitss.com/us

  • Diagnostics Setup - Warning on Step "Wilyhost Agent Details"

    Hi All
    I am having a bit of dificulty configuring the Wily Agent via Solution Manager diagnostics.
    I am currently getting the following errors when trying to set up the Wilyhost Agent when I run the setup wizard I am getting the following results:
    Wilyhost Agent setup finished successfully with limitations. Data of at least one action is not available in Enterprise Manager(solman:6001).
    Step Wilyhost Agent Details
    Created destination EPT_JC01_server0
    Created destination SapStartSrv_nwportal_EPD_04
    Created destination EPD_JC04_server0
    Created destination SapStartSrv_nwportal_EPT_01
    Created action SAP GC|EPT_JC01_server0 - SAP GC|EPT_JC01_server0
    Created action EPD|perth_EPD_04 - SapStartSrv_nwportal_EPD_04
    Created action SAP GC|EPD_JC04_server0 - SAP GC|EPD_JC04_server0
    Created action EPT|perth_EPT_01 - SapStartSrv_nwportal_EPT_01
    Created 4 action(s).
    1 Wilyhost Agent(s) from host perth is connected to the EM.
    90 seconds after restarting the WilyHostAgent the data of the following action is still missing in EM: SAP OsCol - null
    Please check SMDAgentApplication log files for warnings and errors.
    Wilyhost Agent setup finished successfully with limitations. Data of at least one action is not available in Enterprise Manager(solman:6001).
    The Diagnostics agent log is:
    Apr 6, 2010 4:56:35 PM [Thread[SAPOsCol,5,main]] Error      com.sap.smd.wily.hostagent.action.SapOsColAction - processXml(): Error processing saposcol output: saposcol -xml
    AdjustTokenPrivileges failed with 1300
    <?xml version="1.0" encoding="utf-8" ?>
    <saposcol version="COLL 20.95 700 - 20.65 NT 08/02/06" date="1270569346" status="running">
    <!-- Last collection: 2010/04/06 16:55:46 -->
      <OperatingSystem>
            <property name="OpSysRelease">
              <value>Windows NT</value>
              <!-- Version of operating system, `uname -r&apos; -->
            </property>
            <property name="OpSysReleaseName">
              <value>Windows NT 5.2</value>
              <!-- freely choosable text describing OS release name, e.g. &apos;SUSE LINUX Enterprise Server 9 (i586)&apos; -->
            </property>
            <property name="OpSysCategory">
              <value>Windows NT</value>
              <!-- MANDATORY: operating system, e.g. &apos;HP-UX&apos;, &apos;Linux&apos;, &apos;Windows NT&apos;, ... -->
            </property>
      </OperatingSystem>
    [EXCEPTION]
    com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 73, 61, 70(:main:, row:1, col:3)(:main:, row=1, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 73, 61, 70(:main:, row:1, col:3)
         at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2787)
         at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2832)
         at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
         at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:260)
         at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:271)
         at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
         at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
         at com.sap.smd.wily.hostagent.action.SapOsColAction.processXml(SapOsColAction.java:146)
         at com.sap.smd.wily.hostagent.action.SapOsColAction.doRun(SapOsColAction.java:420)
         at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:53)
         at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:728)
         at java.lang.Thread.run(Thread.java:664)
         at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:139)
         at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
         at com.sap.smd.wily.hostagent.action.SapOsColAction.processXml(SapOsColAction.java:146)
         at com.sap.smd.wily.hostagent.action.SapOsColAction.doRun(SapOsColAction.java:420)
         at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:53)
         at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:728)
         at java.lang.Thread.run(Thread.java:664)
    Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 73, 61, 70(:main:, row:1, col:3)
         at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2787)
         at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2832)
         at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
         at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:260)
         at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:271)
         at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
         ... 6 more

    Hi,
    This seems to be a bug and please install the saposcol version 710 as saposcol 710 is downward compatible with release 700 and this issue must be resolved.

  • There was a problem connecting to the server (again)

    Dear All
    There have been many posts with "problem connecting to the server" errors, but they all one way or another get corrupted with Time Machine responses. I have seen threads with a similar problem to mine, but there is no clear answer. So, for this thread please do not make reference to Time Machine. I have never used it.
    I get an error "There was a problem connecting to the server "NAME""
    The server may not exiost or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
    The server is my old laptop running Snow Leopard. I don't use this computer anymore because I have bought a MacBook Pro riunning LIon.
    The error is on my iMac, which I have recently upgraded to Lion. Now that I am not using my Snow Leopard laptop this error is impossible; my iMac is becoming unusable because I cannot type more than 10 words without this error warning.
    As I said, I do not use Time Machine, so that cannot be the problem. It is off. I simply need my iMac to completely forget about my old laptop.
    Any help appreciated.
    M.

    Hope you are doing well TFam5;
    Are you having this problem constantly?
    I want to help but in order to do so I will need more information in regards your devices and configuration, please include all this,.
    What is the operating system that your system utilizes?
    Use this example as a guide Windows 7 home premium 64 bits. The reason we ask your Operating system in all post in due to the fact that I want provide you with detailed suggestion and in other to accomplish some of the instructions that we will provide are operating system dependent or different in different versions of the OS, in short words if you want me to guide thru the process I will need the operating system, the version and the intructiosn width (32 or 64 bits)
    What is the complete printer model?
    HP Photosmart Plus All-in-One Printer - B209a ›
    HP Photosmart Plus e-All-in-One Printer - B210a ›
    HP Photosmart Plus e-All-in-One Printer - B210b ›
    HP Photosmart Plus e-All-in-One Printer - B210c ›
    HP Photosmart Plus e-All-in-One Printer - B210e ›
    Some printer models have as much as 6 different versions is important to know which version exactly do you own in order for me to provide accurate links for your product If you are having issues with your finding the complete version of your product please visit this site. http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=bpy21016&l...
    Provide this info and I will do my best to help you.
    Regards.
    RobertoR
    ▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • There was a problem connecting to the Server. Touch Retry to connect again, or OK to Exit" HELP!

    There was a problem connecting to the Server. Touch Retry to connect again, or OK to Exit."
    I have a newer model HP Photosmart Plus (Print/Scan/Copy/Web)
    Keep getting this error message.  Have pressed Retry, have exited and tried again.  No results.  Have shut off/unplugged/restarted printer and computer several times, but this keeps popping up as soon as I press "Apps".  All I can access is "quick forms", and they don't print correctly (layouts are strange).  Anyone know how to fix this?

    Hope you are doing well TFam5;
    Are you having this problem constantly?
    I want to help but in order to do so I will need more information in regards your devices and configuration, please include all this,.
    What is the operating system that your system utilizes?
    Use this example as a guide Windows 7 home premium 64 bits. The reason we ask your Operating system in all post in due to the fact that I want provide you with detailed suggestion and in other to accomplish some of the instructions that we will provide are operating system dependent or different in different versions of the OS, in short words if you want me to guide thru the process I will need the operating system, the version and the intructiosn width (32 or 64 bits)
    What is the complete printer model?
    HP Photosmart Plus All-in-One Printer - B209a ›
    HP Photosmart Plus e-All-in-One Printer - B210a ›
    HP Photosmart Plus e-All-in-One Printer - B210b ›
    HP Photosmart Plus e-All-in-One Printer - B210c ›
    HP Photosmart Plus e-All-in-One Printer - B210e ›
    Some printer models have as much as 6 different versions is important to know which version exactly do you own in order for me to provide accurate links for your product If you are having issues with your finding the complete version of your product please visit this site. http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=bpy21016&l...
    Provide this info and I will do my best to help you.
    Regards.
    RobertoR
    ▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Maybe you are looking for

  • Why does Flashplayer for Firefox create 1000's of FAP####.tmp files and never cleans then up?

    Version Info FlashPlayer Plugin version: 11.9.900.117 (and many version before) Firefox version                   : 24.0 (and many versions before) Windows Version               : Windows 7-SP1 Directory of Files               :  C:\Windows\Temp Deta

  • Can not burn or read dvd/cd's on imac g4 flat panel

    Hello Just recently I am having a great deal of trouble burning dvd's or cd's. If I manage to get a dvd or cd to burn(which is very rare that I do manage to get them to burn) they will no longer mount on my computer after I have ejected them from the

  • Fonts are not reflecting while running Java Applet Through Forms

    Hello Oralce Gurus!! I have a Java Applet which has few lines of text in different fonts such as AgencyFB, Verdana Ref etc., When I am running this applet from console, I am able to see the text in different fonts. Where as If I run the applet throug

  • Macbook keeps losing wireless link to HP printer

    My Macbook links to HP printer wirelessly fine when its just started up but after time of not using printer Macbook loses wireless connection. In HP Utility software it gives error message ' looking for printer' or devicde not found. I've followed HP

  • Requisition scripts

    Good day I need to add the following the columns to my script but I dont know how to GRV date, GRV number and Payment date SELECT poh.segment1 po_number, porh.segment1 iproc_number, porl.line_num, TRUNC (porh.creation_date) "IPROC Creation_date", TRU