Configuration problem for suncluster3.1

Question

Hi ALL
I am Murali working as system admin in CA , I have configured suncluster3.1.
I have followed below steps
I have machines sun fire v245 O/S is Solaris 10 sparc. Wants to configured suncluster3.1
1) Installing the packages with the installer
2) Scintlla and define the nodes.
3) Iam not using cluster switches and Through Crossable using I connect to directly to two nodes
4).iam not selecting quorum device
after finishing scintlla , I got below error
*** Create a New Cluster ***
Wed Dec 26 12:45:50 IST 2007
Attempting to contact "lodisun028.ca.com" ...
Searching for a remote configuration method ...
scrcmd -N lodisun028.ca.com test isfullyinstalled
The Sun Cluster framework software is installed.
scrcmd to "lodisun028.ca.com" - return status 1.
rsh lodisun028.ca.com -n "/bin/sh -c '/bin/true; /bin/echo SC_COMMAND_STATUS=\$?'"
permission denied
rsh to "lodisun028.ca.com" failed.
ssh [email protected] -o "BatchMode yes" -o "StrictHostKeyChecking yes" -n "/bin/sh -c '/bin/true; /bin/echo SC_COMMAND_STATUS=\$?'"
Permission denied (gssapi-keyex,gssapi-with-mic,publickey,password,keyboard-interactive).^M
ssh to "lodisun028.ca.com" failed.
The Sun Cluster framework is able to complete the configuration
process without remote shell access.
- Cluster Creation -
Testing for "/globaldevices" on "lodisun027.ca.com" ...
/globaldevices is not a directory or file system mount point.
Cannot use "/globaldevices" on "lodisun027.ca.com".
Please help me to configured suncluster3.1, above process if there is any wrong, please correct me if iam wrong
please give me step by step documents for suncluster3.1
mail id :[email protected]
cheer's
Murali Muppa

Answer 1

Dear Tim
As you said,i followed
but my requirement is without qourum device i want to configure.through nfs sharing can i configure?
if possible can you please guide me how to take nfs sharing.
and each other i communicated through crosswire cable,is it possible,if there is any mestek plz help me
after creating i got beloe error
bash-3.00# view /var/cluster/logs/install/scinstall.log.1197
"/var/cluster/logs/install/scinstall.log.1197" [Read only] 134 lines, 5171 char
acters
[Hit return to continue]
*** Create a New Cluster ***
Thu Feb 7 10:45:25 IST 2008
Attempting to contact "lodisun027" ...
Searching for a remote configuration method ...
scrcmd -N lodisun027 test isfullyinstalled
scrcmd: lodisun027 - Node does not allow remote configuration.
scrcmd to "lodisun027" - return status 104.
rsh lodisun027 -n "/bin/sh -c '/bin/true; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rsh to "lodisun027" - return status 0.
ssh root@lodisun027 -o "BatchMode yes" -o "StrictHostKeyChecking yes" -n "/bin/s
h -c '/bin/true; /bin/echo SC_COMMAND_STATUS=\$?'"
Permission denied (gssapi-keyex,gssapi-with-mic,publickey,password,keyboard-inte
ractive).^M
ssh to "lodisun027" failed.
The remote shell (see rsh(1)) will be used for remote execution.
- Cluster Creation -
Testing for "/globaldevices" on "LODISUN028.ca.com" ...
Testing for "/globaldevices" on "lodisun027" ...
rsh lodisun027 -n "/bin/sh -c '/usr/bin/mkdir -p -m 0755 /var/cluster /var/clust
er/run; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rsh lodisun027 -n "/bin/sh -c '/usr/bin/chgrp sys /var/cluster /var/cluster/run;
/bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rcp /var/cluster/run/scinstall_common lodisun027:/var/cluster/run/scinstall_comm
on
rsh lodisun027 -n "/bin/sh -c '/usr/bin/chmod 0555 /var/cluster/run/scinstall_co
mmon; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rcp /var/cluster/run/cmd_chk_globaldev lodisun027:/var/cluster/run/cmd_chk_globa
ldev
rsh lodisun027 -n "/bin/sh -c '/usr/bin/chmod 0555 /var/cluster/run/cmd_chk_glob
aldev; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rsh lodisun027 -n "/bin/sh -c '/var/cluster/run/cmd_chk_globaldev fs /globaldevi
ces; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rsh lodisun027 -n "/bin/sh -c '/usr/bin/rm -f /var/cluster/run/scinstall_common
/var/cluster/run/cmd_chk_globaldev; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
Checking installation status ...
rsh lodisun027 -n "/bin/sh -c '/usr/bin/test -f /etc/cluster/.installed; /bin/ec
ho SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rsh lodisun027 -n "/bin/sh -c '/usr/cluster/lib/scadmin/lib/cmd_test isinstallin
g; /bin/echo SC_COMMAND_STATUS=\$?'"
"" is not running.
SC_COMMAND_STATUS=0
rsh lodisun027 -n "/bin/sh -c '/usr/bin/test -f /etc/cluster/nodeid; /bin/echo S
C_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=1
rsh lodisun027 -n "/bin/sh -c '/usr/bin/test -x /usr/bin/gzcat; /bin/echo SC_COM
MAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
The Sun Cluster software is installed on "LODISUN028.ca.com".
The Sun Cluster software is installed on "lodisun027".
Starting discovery of the cluster transport configuration.
===========================
LODISUN028.ca.com
===========================
scrconf -n cmd=discover_send,adapters=bge1:bge2,vlans=0:0,token=suncluster_lodis
unclust01,sendcount=30
===========================
lodisun027
===========================
rsh lodisun027 -n "/bin/sh -c '/usr/cluster/lib/scadmin/lib/cmd_autodiscovery 0:
0 suncluster_lodisunclust01 2 30; /bin/echo SC_COMMAND_STATUS=\$?'"
quit
SC_COMMAND_STATUS=0
===========================
Probes were sent out from all transport adapters configured for this
node ("LODISUN028.ca.com"). But, they were not seen by any of the
other nodes. This may be due to any number of reasons, including
improper cabling or a switch which was confused by the probes.
You can either attempt to correct the problem and try the probes
again or manually configure the transport. To correct the problem
might involve re-cabling, changing the configuration, or fixing
hardware. You must configure the transport manually to configure
tagged VLAN adapters and non tagged VLAN adapters on the same private
interconnect VLAN.
===========================
LODISUN028.ca.com
===========================
scrconf -n cmd=discover_send,adapters=bge1:bge2,vlans=0:0,token=suncluster_lodis
unclust01,sendcount=30
===========================
lodisun027
===========================
rsh lodisun027 -n "/bin/sh -c '/usr/cluster/lib/scadmin/lib/cmd_autodiscovery 0:
0 suncluster_lodisunclust01 2 30; /bin/echo SC_COMMAND_STATUS=\$?'"
bge1:0:LODISUN028:bge1:0
quit
SC_COMMAND_STATUS=0
===========================
The following connection was discovered:
LODISUN028.ca.com:bge1 switch1 lodisun027:bge1
Only one connection was found for "lodisun027".
Probes were sent out from all transport adapters configured for this
node ("LODISUN028.ca.com"). But, they were not seen by all of the
other nodes. This may be due to any number of reasons, including
improper cabling or a switch which was confused by the probes.
You can either attempt to correct the problem and try the probes
again or manually configure the transport. To correct the problem
might involve re-cabling, changing the configuration, or fixing
hardware. You must configure the transport manually to configure
tagged VLAN adapters and non tagged VLAN adapters on the same private
please help me to configure simple two-node cluster.
cheer's
Murali M
[email protected]