Configuration Profile Order BOM/knowledge based setting

We use Variant Configuration for some of our products. I've noticed with newly created Config Profiles we are now getting the field Knowledge-Based Order BOM being selected automatically, even though we want to use Planned/Prod Order. The odd thing is the "Order BOM" field is not selected, but Knowledge-Based is. I'm suspecting this happened as a result of a Support Pack, but so far have not been able to get that verified from SAP. Anyone ever have this issue?

Hi Lynsley:
The same situation happens in our system
The thing is, when you donnot use "Order BOM", there is no related effects even though the “Knowledge-Based” is selected
So you can ignore it and go on with your work.
Best regards

Similar Messages

Production Order BOM with Variant Configurable Material

Hi,
I have a requirement to process the document items in the Production Order BOM for a variant configurable martial. I am not sure which Function Module will do this purpose. I checked the FM: CS_BOM_EXPL_MAT_V2 and does not seem to be working.
Can you please help me with a suitable Function Module or program that will process the Production Order BOM? Appreciate Your Help.
Thanks,
Kanan
Edited by: Kannan SA on Jul 6, 2011 8:59 PM

What are you doing with the characteristics right now ?
If you want operations selected based on characteristic values, you need to have dependencies written just like you do (or in your case, will do) in your BOM components.
I understand the business-push to not do things 100% at the start and just "oh we'll add that part later" but I would really push back to get that part included initially.

Order BoM Configuration

In our business we use multi level configuration, as a result, when we use CU51 to manage Engineering to Order details on Sales Order BoM the lower level configuration is part of the CU51 activities.
When we complete any actions in CU51 and save the order BoM, the lower level configuration is recreated on the date the order BoM work was saved.
Example:
Parent Material A and Child Material B - both configurable.
When an order is created for A on 01/01/14 the configuration for the A and B is saved in order change documents for each material with a creation date of 01/01/14.
Engineer completes Order BoM work 01/03/14 on material A, when Order BoM is saved the lower level configuration obtains new set of change documents for the configuration with a creation date of 01/03/14.
Any subsequent changes made using Order BoM result in the configuration being re-created with new documents.
Is there IMG settings or user exits or anything else that could possibly be used to keep the original date or use the date from CU51 initial screen?

Thank you for replies,
I checked it, in CU41order BOM was selected, it was configured the fert materials in MRP 3 VIEW, was also assigned the relation in CS40.
Still in CU51, I am not able to enter into sales order BOM. The error was - Order BOM processing not possible - owner MARC not allowed.
Here I am having 10 FG variants and 1 KMAT material, during sales order creation KMAT material will be repleced by FG variant by variant matching.
With respect to SD module TAN - item category was selected.
What about TAC, is there any diiference.
Or is it any settings I have to maintain.
Regards,
B C Gudageri

Order BOM process- material vairant for configurable assembly

Hi,
I am working on multi-level material variants with order BOM process. The configurable header material and assembly should be
replaced by material variants after configuration is done. I configured the multi-level BOM explosion at sales order. After I configured the assembly, I executed type matching and a material variant for assembly was found. But the system didn't replace
configurable assembly with material variant automatically and I couldn't find any functionality to carry out replacement. The header material was replaced by material variant in sales order entry. However, while I tried to carried out technical processing to
create order BOM (CU51), the error message shows that I couldn't create order BOM due to the header material has been replaced
with material variant. Does anyone have experience at multi-level material variants with order BOM process? Please kindly help.
Thanks.
B. Regards,
Nancy

Hi ,
Could you pls explain the issue bit more clearly, As per my understanding you are using order BOM with variant configuration
Is it correct ?
Check the configuration profile settings ( CU41 ) , did you selected the order BOM radio button

Copy Order Bom in Two-Step Variant Configuration

Dear Community,
In Multilevel VC Order Bom Scenario. Configuration is made for the first level by sales department, then further levels are configurated by Technical Department.
If the sales document is a quotation and then we want to create de sales order with reference to the quotation, only the configuration for the first level is getting copied. All the characteristics of the lower level configurable materials appear in blank, as well as selected class items in quotation as well as manually added components.
Is there a way to copy the whole order bom of the original document or the characteristics value for every level?
Thank you
Sebastián Ligueros

Hi Rahul,
Basically , an order bom doesnot explode therefore you cannot configure any of the components.Please review note 303446
By changing the default value of the variable GV_FORCE_BOM_EXPLOSION_ASL in Include LCUKOFBE, you can force the explosion of the order BOM in the sales order.As a result, subordinate items of the order BOM are configured provided that these items were not fixed.I
Therefore please set this variable GV_FORCE_BOM_EXPLOSION_ASL to X and retest,
Thanks
Amber

Sales order BOM configuration - CU51

Hi,
I am using with Variant configuration. I will be configuring the FERT into Sales Order for the characteristic.
Then I tried for CU51 t code for BOM configuration (for adding or removing of materials for some special cases) in the sales order,
But I am not able to do so, and I am getting an error as -> Order BOM processing not possible - owner MARC not allowed
In CHANGE CONFIGURATION PROFILE(CU42) for KMAT material I had given -> Order BOM -> result oriented- in configuration parameters.
Is there any settings is to be made
Please your advices will be appreciated.
Thank you.

Thank you for replies,
I checked it, in CU41order BOM was selected, it was configured the fert materials in MRP 3 VIEW, was also assigned the relation in CS40.
Still in CU51, I am not able to enter into sales order BOM. The error was - Order BOM processing not possible - owner MARC not allowed.
Here I am having 10 FG variants and 1 KMAT material, during sales order creation KMAT material will be repleced by FG variant by variant matching.
With respect to SD module TAN - item category was selected.
What about TAC, is there any diiference.
Or is it any settings I have to maintain.
Regards,
B C Gudageri

Variant Configuration - Order BOM problems

Good morning,
I am having problems regarding the Order BOM in variant configuration. I have maintained the configuration profile as follows:
CONFIG PARAMETERS
Ordem BOM
Result oriented
Multilevel
BOM application - SD01
ORDER BOM
Maint. in order allowed - checked
Automatic fixing - checked
I have also maintained a BOM, for usage '5 - sales and distriburion', with the selection conditions at the object dependencies.
When I test the results in CU50, assign all characteristics and push the button "Engineering" the icons for manual maintenance appear correctly in the screen...BUT when I raise the actual order, the icons are gone, therefore I cant add or delete items of the selected BOM.
Any ideias of how to fix that?
Thanks in advance.
Adriano Cardoso

Note 303446
Note 901452
composite Note 774346
Please refer to above notes. Hope it helps
Regards
Sai

Set Email signature through configuration profile

Is there a way to set the iOS email signature through a configuration profile (.mobileconfig)? If not, is there any other solution instead of copy-pasting the signature into the Mail.app prefs?
Regards,
Christophe

Hi,
Automatic E mail notification can be acheived as follows
1. First of all decide on what basis would you want to trigger the action for eg. based on status or Date profile ...
2.Make partner dependent in the action definition and put the responsible partner function.( for eg:- employee responsible)
3.Now for your action profile maintain the Schedule /Start condition (if status = in process).
This will trigger the action (partner dependent) when status is in process and the document is saved(Action Definition) .If you want the mail to go after a stipuleted time you can attach a date rule to your action and a date profile with that rule to your transaction type .
Please reward if it helps!
Cheers
Raj
Message was edited by:
shankar raj

Configurable Material as BOM component in SALES Order BOM

Hi Gurus
I have following
1. Material ABC is a configurable material (variant)
2. BOM of this ABC has further configurable materials
Is it possible to maintain requried charasterstic of the compoents which are configurble at the time of SALES ORDER BOM CREATION.
If yes, how. please explain.
Thanks in advance
sunil

Dear Sunil,
Please refer to the following link:
http://sap-img.com/sap-sd/sales-bom-implementation.htm
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Do let me know in case of any queries.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Set 'Auto-join' to on in a configuration profile?

We're using ICU generated profiles to provide WPA2 (EAP-SIM) Wi-Fi login configurations to our iPhone users. This works fine except that they need to manually set 'Auto-join' to ON to ensure they always login to Wi-Fi.
As we'd like to make sure everyone is using Wi-Fi instead of 3G when on campus, is there a way to configure this in a profile or over-the-air?

The deleting apps restriction is new in iOS 6 but is available only on supervised devices. You can supervise devices and create and install a configuration profile containing this restriction using Apple Configurator.

Varient configuration order bom

can we change the order bom created during sales order creation through varient configuration without ECM activities?
thanking you
srinivas

You mean "Selected Sheet Weight" in the configuration of the window when creating the production order or sales order ?

Sales order costing after changes on configuration or sales order BOM

Hi all
Our sales order items requruire an sales order costing. This is done automatically, when saving the sales order item:
Settings in requirement class:
- costing: X (costing required)
- costing-ID: B (automatic costing and marking)
This works perfect, means the sales order receives a caluculation that is marked.
Now, something is changed on the sales order BOM with transaction CU51
It seems, that each time you change the BOM you have to ensure yourself, that the costing of the sales order items (via VA02 -> extras -> costing) has to be performed manually.
There is no SAP standard process, that does this automatically.
Thanks for your feedback.
Pius

Dear Pius,
System cannot take the changes from the BOM and execute the cost estimate automatically.
Need to refresh system when the changes are happened i..e need to execute the Cost Estimate once again.
Kind Regards
Umapathi G

Cannot set Proxy Auto Config in iPhone/iPad Configuration Profile

Hi, All.
Our enterprise uses internal and external DNS, and we leverage Proxy Auto Config (PAC) files to determine how to resolve hostnames.
I can create a VPN Configuration Profile with the URL for the PAC file, so that when the VPN is enabled, it will start using the PAC file to resolve.
However, there is no such option in the WiFi Configuration Profile.
Any idea if there is a way to automate this, or if Apple intends to include this in a future version of iOS or iPCU?
Thanks,
David

Ooops. Sorry, I meant "10/8", not "10/24" IP range.

Configuration Simulation and Configuration Profile

Hi,
I have setup my configuration profile to Config parameter - Process to Sales Order (SET) with single-explosion but when I go to configuration simulation, NO BOM components were selected even without object dependency. However, when I set to Config parameter - Process to Plnd/Prod.Order with single-explosion , the BOM components were selected and displayed in configuration simulation. I have BOM that have both usage for Production (Usage 1) and also Sales and Distribution (Usage 5).
I would really appreciate it if anyone got any suggestion/solutions.
Thanks so much.
Cheers,
Sue

Hi dear did u have any PP Materials for certification, please help me.
My e-mail address [email protected]
Thank you
Regards
Karthik G

Configure-to-Order (CTO) Production with Variant Configuration and Assembly

We are trying to create a Configure-to-Order (CTO) Production with Variant Configuration and Assembly Processing.
I have set up the required master data for variant configuration which is working fine in a sales order. I have used startegy group 82 in the MRP view of the material master for Finished goods/header material. A production order with BOM explosion is getting generated automatically during the creation of the sales order.I have stock of components available. Uploaded using 561 movement type (unrestricted stock).The requirement class that is being determined is 201.
ISSUE:
Availability check of the components in the production order that is getting automatically generated during sales order creation is failing. The components are not getting confirmed inspite of initialising the stock of the components in the plant we are using.
I am looking for pointers on the important settings related to the availability check in Configure to Order scenario that have to checked to resolve this issue.
TIA

Hi,
Availability check controls for Production order will be done in OPJK for plant , order type combination. Based on the settings either for creation or release system will carry Availability check of components. you can set the controls such that release can be possible even if parts are missing.
If you have settings to restrict the release if components are missing and there is stock in unrestricted, then you need to transfer the stock to the sales order using MB1B and 413 movement type so that system can recognize the availability and allow the release of order.
Based on your requiremnts you can map the settings in OPJK
Hope this will help
Regards,
Brahmaji D

Configuration Profile Order BOM/knowledge based setting

Similar Messages

Maybe you are looking for